Technical Data | January 2020 3MTM Flux Field Directional Material (FFDM) EM80KM Product Description 3MTM Flux Field Directional Material (FFDM) EM80KM is a multi-layer construction consisting of primary inner soft magnetic foil layer(s) with a top black film layer and an acrylic pressure sensitive adhesive (PSA) that provide many special features. Key Features * * * * * * High permeability magnetic foil Approximately 80,000 permeability maximum Thin overall construction Pressure sensitive acrylic tape for high adhesion Supplied on a removable liner for easy handling Custom sizes may also be available 3M FFDM EM80KM Black Top Film Magnetic Foil Adhesive layer PET Film Release Liner Product Construction/Material Description Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Final product specifications and testing methods will be outlined in the products Certificate of Analysis (COA) that is provided once the product is approved by 3M for general commercialization and development work is completed. 3MTM Flux Field Directional Material (FFDM) EM80KM Property EM80KM-0025-1 EM80KM-003-1 EM80KM-005-1 Black Film Top Film Magnetic Foil Layer Type Adhesive Black PET Film Black PET Film Magnetic Layer Soft Magnetic foil Magnetic Layer Soft Magnetic foil Acrylic Type Adhesive Layer 0.031 mm total 0.050 mm Total thickness Liner / Clear PET Acrylic Type Adhesive Layer 0.026 mm total 0.050 mm EM80KM-2D-005 Black PET Film EM80KM-2D0045 Black PET Film Magnetic Layer Soft Magnetic foil Acrylic Type Adhesive Layer 0.050 mm 0.036 mm Magnetic Layer Soft Magnetic foil Acrylic Type Adhesive Layer 0.047 mm total 0.050 mm Magnetic Layer Soft Magnetic foil Black PET Film Acrylic Type Adhesive Layer 0.052 mm total 0.050 mm 3MTM Flux Field Directional Material (FFDM) EM80KM Applications * * * * * * Shield DC and low frequency magnetic field Wireless power system power transfer efficiency improvement Potential devices include mobile phone, computers, tablets, measurement and sensors Protect magnetic flux sensitive device such as a hall sensor and a flux gate from external low frequency magnetic fields Assembly of magnet coil for Wireless Charging System Electronic equipment protection for automobile applications Application Techniques 3MTM Flux Field Directional Material (FFDM) EM80KM is a magnetic material designed to interact and influence an Electro-Magnetic (EM) field. The EM field could be generated for various reasons and in many applications it is desired to focus the EM field across a specific volumetric area, such as a secondary EM field pick-up coil or antenna. 3M FFDM EM80KM is designed to efficiently couple to the EM field and redirect and focus the field as desired in a given application. The product's performance is based on several application considerations: 1) Permeability of the 3M FFDM material at the frequency range or frequency peak of the intended application can affect the performance. Permeability of the 3M FFDM material varies with frequency and is a measure of how well the EM material may couple with the EM field and impact performance. 2) Thickness of the 3M FFDM product. Multiple thickness options can be designed and can be used to optimize an applications performance. 3) End use application orientation and location affects the 3M EM products interaction with an EM field. Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Final product specifications and testing methods will be outlined in the products Certificate of Analysis (COA) that is provided once the product is approved by 3M for general commercialization and development work is completed. 3MTM Flux Field Directional Material (FFDM) EM80KM Property Electrical Resistivity (m) Maximum Permeability Magnetic Flux Density (T) Temperature Range (C) * Methodb ASTM D267* 3M Test Method** VSM*** - Value 1.1 x 10-6 80,000 Maximum 1.3 T -25~110 Methods listed as ASTM are tested in accordance with the ASTM method noted Permeability/Results of VSM can vary with test method and/or equipment used for testing at different test sites. ** / *** Storage and Shelf Life The shelf life of 3MTM Flux Field Directional Material EM80KM is 12 months from the date of manufacture when stored in the original packaging materials and stored at 21C (70F) and 50% relative humidity. 3MTM Flux Field Directional Material (FFDM) EM80KM Certificate of Analysis (COA) The 3M Certificate of Analysis (COA) for this product is established when the product is commercially available from 3M. The commercially available product will have a COA specification established. The COA contains the 3M specifications and test methods for the products performance limits that the product will be supplied against. The 3M product is supplied to 3M COA test specifications and the COA test methods. Contact your local 3M representative for this product's COA. Final product specifications and testing methods will be outlined in the products Certificate of Analysis (COA) that is shipped with the commercialized product. Regulatory: For regulatory information about this product, contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Electronics Materials Solutions Division 3M Center, Building 224-3N-11 St. Paul, MN 55144-1000 1-800-251-8634 phone 651-778-4244 fax www.3M.com/electronics 3M is a trademark of 3M Company. Please recycle. (c)3M 2020. All rights reserved. 60-5005-0174-1