Closed End Splices Product Facts For single and multiple wire applications Nylon or vinyl or PVF 2 insulated Temperature ratings of 90C, 105C, 150C 300V, 600V or 1000V rated Crescent crimp configuration Covers wire ranges from 24 to 6 AWG [0.2 to 16 mm2] 509 to 42,700 CMA Copper or steel splice material Plated or unplated Solid or stranded copper wire and approved AMP Pre-insulated Closed End Splices have been designed specifically to answer the need for inexpensive, insulated electrical terminations. They can be used in almost every type of commercial application where multiple wires need to be brought together for a reliable termination. (e.g. large and small appliances and the lighting industry). high quality terminations. Tool and terminal have been designed as a team to promote ease and speed of application and at the same time to provide precise crimping pressure for every wire size combination. This connection provides maximum conductivity, tensile strength, and high resistance to corrosion. The Closed End Splice products described in this catalog accommodate wire sizes from 24 through 6 AWG [0.2 to 16 mm2] 509 to 42,700 CMA. The appeal of Closed End Splice products lies in their broad range of wire sizes, built in pre-insulation, ease and speed of application, uniform reliability, and low installed cost. The quality of performance, the facility of installation and the inherent simplicity of Closed End Splices make them ideal for many industrial applications. As is true of all AMP terminal and splice lines, carefully engineered application tooling has been developed for the Closed End Splice line to provide uniformly Need more information? Call Technical Support at the numbers listed below. Technical Support is staffed with specialists well versed in Tyco Electronics products. They can provide you with: Technical Support Catalogs Technical Documents Product Samples Tyco Electronics Authorized Distributor Locations (c) Copyright 1994 by Tyco Electronics All Rights Reserved. AMP, BOMB-TAIL, CERTI-CRIMP, AMP-TAPETRONIC are Trademarks. 1 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Vinyl BOMB-TAIL Splices -- VS, ECV Wire Size Range AWG 22 to 6 [0.3 to 16 mm 2], CMA 509 to 42,700 Wire Size [mm2] Circular Mils L Wire Combination Charts Insulation Color Blue 22-16 [0.3-1.4] 3,248-4,872 4081396 Blue Blue 22-16 [0.3-1.4] 3,248-4,872 4082228 4081395 Trans. Trans. Trans. Trans. Red 22-14 [0.3-2.0] 509-5,180 4081394 Purple Purple Purple 4089850 Purple Trans. 22-12 [0.3-3.0] 3,248-11,400 4081479 Trans. Trans. 22-10 [0.3-6.0] 3,248-13,100 4081029 4081002 1 22-10 [0.3-6.0] 5,180-13,100 4081397 18-8 [0.8-8.0] 10,320-20,820 4081008 18-6 [0.8-16] 19,500-42,700 4082605 Purple Purple Purple Yellow Yellow Black Green Blue L Dim. Max. Opening Dia. Min. .750 19.05 .750 19.05 .800 20.32 1.093 27.76 1.093 27.76 1.000 25.40 .825 20.96 .729 18.52 .740 18.80 .740 18.80 .775 19.69 .900 22.96 1.500 34.10 1.125 28.58 1.125 28.58 1.010 25.65 1.010 25.65 1.125 28.88 .975 24.76 1.010 25.65 1.263 31.08 1.575 40.01 1.600 40.64 Part Numbers Tape Mounted Material Plating Splice Marking* (Voltage & Temp. Rating Code) .173 4.39 .250 6.35 .215 5.46 .255 6.48 .255 6.48 .265 6.73 .265 6.73 .156 3.96 .187 4.75 .187 4.75 .235 5.97 .235 5.97 .360 9.14 .360 9.14 .360 9.14 .312 7.92 .312 7.92 .360 9.14 .235 5.97 .300 7.62 .500 12.70 .500 12.70 Copper Tin VS 34306-3 -- Copper Tin VS 34349-3 -- VS -- .500 12.70 Copper Tin Loose Piece 34864-3 Steel Tin ECV 50920-3 -- Steel Tin ECV 50920-11 -- Steel Tin ECV 328890-3 2-328890-1 ECV 1-330021-0 Steel Tin 330021-3 Copper Tin VS 34304-3 -- Copper Tin VS 36964-3 02-36964-2 Copper Tin VS 2-36964-51 -- VS -- Copper None 2-328375-3 Copper None ECV 55843-1 -- Copper None ECV 53234-1 -- Copper None ECV 329251 Copper None ECV 2-329251-21 2-329251-1 -- Copper Tin VS 36965-3 Copper Tin VS 1-36965-31 -- Copper Tin ECV 321519-3 2-321519-2 Copper Tin VS 01-36965-1 -- 34308-3 Copper Tin VS 34865-3 -- Copper Tin ECV 55808-1 -- Copper Tin ECV 320788-3 -- Copper None ECV 53891-1 -- Bulk package 2 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Nylon Molded Splices -- ECN, EC Wire Size Range AWG 22 to 10 [0.3 to 6.0 mm 2], CMA 509 to 13,100 L Wire Size [mm2] Circular Mils Wire Combination Charts 4081271 22-14 [0.3-2.0] 509-5,180 4088806 4081021 4088807 22-10 [0.3-6.0] 3,248-13,100 Opening Dia. Min. Trans. .680 17.27 .680 1727 .680 17.27 .775 19.69 .775 19.69 .970 24.64 .970 24.64 .720 18.29 .720 18.29 .250 6.35 .250 6.35 .250 6.35 .375 9.53 .375 9.53 .370 9.40 .370 9.40 .375 9.53 .375 9.53 Trans. Trans. Black Trans. Trans. Black Trans. 4081003 1 L Dim. Max. Insulation Color Trans. Part Numbers Tape Mounted Material Plating Splice Marking* (Voltage & Temp. Rating Code) Loose Piece Copper Tin ECN 02-35115-11 01-35115-0 Copper Tin ECN 01-35115-21 -- Copper Tin ECN 2-355927-11 1-55927-0 Copper Tin ECN 02-35653-11 02-35653-1 Copper Tin ECN 02-35653-21 -- Copper Tin EC 2-355929-11 -- Copper Tin EC 02-53915-11 02-53915-2 Copper Tin EC 2-328730-41 2-328730-1 Copper Tin EC 2-328730-111 -- Splice Marking* (Voltage & Temp. Rating Code) Loose Piece Bulk package PVF2 Molded Splices (Kynar) 1 Wire Size [mm2] Circular Mils Wire Combination Charts Insulation Color L Dim. Max. Opening Dia. Min. Material Plating 22-12 [0.3-3.0] 3,248-11,400 4082907 Red .955 24.25 .375 9.53 Copper Tin Part Numbers Tape Mounted 02-54316-11 -- Bulk package *Splice Marking VS-- 300V, 90C ECN-- 300V 105C ECV-- 600V max. Building Wiring EC-- 600V max. Building Wiring --1,000V max. Fixtures and Signs, --1,000V max. Fixtures and 105C UL, 90C CSA Signs 105C Type of Crimp C-- C Crimp CC-- Confined Crescent CO-- Crescent Oval Stranded Wire Only 150C 3 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Vinyl and Nylon Tooling Manually Operated Tools Our top-of-the-line crimping tools feature the original CERTI-CRIMP ratcheted crimp control. All tools are designed to exacting specifications and manufactured using the highest quality materials to provide long service life for low production runs, repairs and prototype work -- any application requiring consistent, highly reliable terminations. Models are available providing double action, in which crimping dies travel in an arc-like path, or straight action, which prevents possible rotation of the terminal due to die arcing. A heavy-head style terminates large heavy-gauge wire. Heavy Head Hand Tool (HHHT) AMP-TAPETRONIC Machine Part No.69875 (Requires Dies) Long Handle Tool (DAHT) Vinyl Tools for Loose Piece Splices Wire Size [mm2] Circular Mils Wire Combination Chart 22-16 [03-1.4] 3,248-4,872 4081396 22-16 [03-1.4] 3,248-4,872 22-14 [0.3-2.0] 509-5,180 22-12 [0.3-3.0] 3,248-11,400 22-10 [0.3-6.0] 3,248-13,100 22-10 [0.3-6.0] 5,180-13,100 18-8 [0.8-8.0] 10,320-20,820 18-6 [0.8-16] 19,500-42,700 45329 CC 45330 Insul. Crimp CC 45328 CC 68022 CC 02-34306-51 -- 45329 CC 45328 CC 68022 CC 02-34349-51 02-34864-51 -- -- 69820 Insulation Crimp C 02-50920-51 02-50920-11 -- Die for5 Model 2614** Die for Model 1210** Die Assembly4 Crimping for 69365, 69365-2, Jaws 69710, 46110-2 for 68068 & & 69319-1 68068-33 4082228 4081395 4081394 For Tape Mounted Splices Die Assembly for 69875 3 Hand Tool Crimping Head for 69005 or (69010) 69145 C 45216 CO 48087 CC* 48208 C -- 1 69238-1 Requires Die 69239 C 45217CO 302219 C Part Numbers Loose Tape Piece Mounted 69303-2 C 354422-1CO 314833-1CO 69973 C 45218 CO 69951 CO 2-328890-5 2-328890-1 2-330021-51 1-330021-0 02-34304-51 -- 02-36964-51 02-36964-2 02-36964-51 -- 2-328375-31 -- 4089850 02-55843-11 4081479 02-53234-11 -- 2-329251-21 2-329251-1 2-329251-21 -- 4081029 4081002 4081397 4081008 46866 C 69430 C (46516) C 45219-2 CO 48208 C 37836 C 302219 C (45220) CO 45324 CC 69335 C 314592-1C 314621-1CO 47811 C 69952 C 45221 CO 69950 CO -- 02-36965-11 01-36965-1 01-36965-31 -- 2-321519-11 2-321519-2 45323 CC (45325) CC 45221 CO (69244) C 68245-1CO 4082605 68268-1CO 02-34308-11 -- 01-34865-31 -- 1 -- 2-320788-21 -- 02-53891-11 -- 02-55808-1 *For p/n 34304 and 36964 only (insulation crimp) **Where listed Model 2614 or 1210 are the recommended tool 1 Bulk packaged 3 With foot pedal control 4 These dies may be used with Model 2614 Pneumatic Tool and Straight Action Adapter part number 354173-1 5 Model 2614 may be ordered with either a foot pedal or hand actuator 4 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Nylon and Vinyl Tooling Pneumatic Tools Designed for medium production, these semi-automatic power tools offer the convenience of hand tools plus the effortless precision and speed of machines. They are built for long, rugged service and are equipped with remov able crimping dies for terminating a variety of AMP products. Pneumatic Tool Part No. 46110-2 Pneumatic Tool Model No.2614 or 1210 Pneumatic Tool Part No.69005 or 69010 Pneumatic Tool Part No. 69365-2 Nylon Tools for Loose Piece Splices Wire Size [mm2] Circular Mils 22-14 [0.3-2.0] 509-5.180 Wire Combination Chart 4081271 Die for5 Model 2614** 45216 CO 48208 C 45217 CO 302219 C 354422-1CO 314833-1CO Die for Model 1210** Die Assembly4 for 69365, 69365-2, 69710, 46110-2 & 69319-1 For Tape Mounted Splices Die Assembly 698753 45219-2 CO 48208 C 37836 CO 302219 C (45220) CO Part Numbers Loose Piece Tape Mounted 02-35115-11 45218 CO 69951 CO 01-35115-2 4088806 4081021 22-10 [0.3-6.0] 3,248-13,100 Hand Tool Crimping Head for 69005 or (69010) 314621-1CO 45221 CO 69950 CO 01-35115-0 -- 1 1-55927-11 01-55927-0 35653 2-35653-1 -- 2-35653-21 4088807 1-55929-1 -- 4081003 01-53915-11 01-53915-41 1-328730-51 1-328730-11 01-53915-2 -- 2-328730-1 -- 1 46866 C 69430 C 354422-26C 314592-1C 47811 C 69952 C PVF2 Molded Splices (Kynar) Tools for Loose Piece Splices Wire Size [mm2] Circular Mils Wire Combination Chart 22-12 [0.3-3.0] 3,248-11,400 4082907 Hand Tool Crimping Head for 69005 or (69010) Die for 5 Model 2614** Die for Model 1210** Die Assembly4 for 69365, 69365-2, 69710, 46110-2 & 69319-1 46866 C 69430 C (46516) C 354422-26C 314592-1C 47811 C For Tape Mounted Splices Part Numbers Die Assembly 698753 Loose Piece Tape Mounted -- 1-54316-1 -- **Where listed Model 2614 or 1210 are the recommended tool 1 Bulk packaged 3 With foot pedal control 4 These dies may be used with Model 2614 Pneumatic Tool and Straight Action Adapter Part Number 354173-1 5 Model 2614 may be ordered with either a foot pedal or hand actuator 6 Limited wire size range; see Instruction Sheet 408-9906 Splice Marking VS-- 300V, 90C ECN-- 300V 105C ECV-- 600V max. Building Wiring EC-- 600V max. Building Wiring --1,000V max. Fixtures and Signs, --1,000V max. Fixtures and 105C UL, 90C CSA Signs 105C Type of Crimp C-- C Crimp CC-- Confined Crescent CO-- Crescent Oval Stranded Wire Only 150C 5 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Spare Wire Caps and Tooling Wire Size Range AWG 22 to 10 [0.3 to 6.0 mm 2], CMA 509 to 13,100 Material Copper Tin plated Insulation -- Nylon For Unstripped Wire .515 13.08 .515 13.08 .515 13.08 .515 13.08 Yellow Wire Insulation Diameter Range .048-.075 1.22-1.91 .080-.115 2.03-2.92 .120-.145 3.05-3.68 .150-.220 3.81-5.59 Stripped Wire .430 10.92 Red Stripped Wire .430 10.92 Stripped Wire Unstripped Wire Wire Size [mm2] Circular Mils -- 22-18 [0.3-0.8.5] 509-3,248 16-14 [1.4-2.0] 2,050-5,180 12-10 [3.0-6.0] 5,180-13,100 -- Style Unstripped Wire Dimension Cap L Insulation Max. Color Trans. Wire Insulation Diameter Max. For Stripped Wire Part Numbers Loose Tape Piece Mounted Tooling Hand Tool T-Head Die For 69875 -- 3244841 -- 46063-11 -- -- -- 3244851 2-324485-1 46063-11 -- 68166-1 -- 3244861 -- 46063-11 -- -- -- 324487 1 -- 46063-1 -- -- -- .124 3.15 328307* -- 473861-1 59250 -- Blue -- .149 3.78 328308* 2-328308-1* 473871-1 59250 68169-1 .478 12.14 Yellow -- .210 5.33 328309* -- 59239-42 -- -- .515 13.08 .515 13.08 .515 13.08 .515 13.08 Trans. .048-.075 1.22-1.91 .080-.115 2.03-2.92 .120-.145 3.05-3.68 .150-.220 3.81-5.59 -- 3246933 -- 46063-11 -- -- -- 3246943 -- 46063-11 -- -- -- 3246953 -- 46063-11 -- -- -- 324696 -- 46063-1 -- -- Red Blue Red Blue Yellow 3 1 1 Long Handle Tool Heavy Head Tool Moisture resistant *See Table I 1 2 3 Table I: Military Cross Reference (meets MIL-T-7928) Part Number MS 25274 Military Dash -2 -3 -4 Class 1&2 1&2 2 1&2 AMP Part Number 2-328307-1 2-328308-1 2-328308-1 2-328309-1 6 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Vinyl and Nylon Tooling Instruction Sheet Cross Reference List Hand Tool 45216 45219-2 45324 45329 45330 46063 46866 473861 473871 48087 48208 59239-42 69145 69335 Instruction Sheet 408-1578 408-1578 408-1544 408-1544 408-1552 408-1510 408-1539 408-1559 408-1559 408-1552 408-1738 408-1261 408-1804 408-1873 Die for 69005 37836 45217 45323 45328 69238-1 69239 69430 302219 Instruction Sheet 408-1415 408-1415 408-1413 408-1413 408-1816 408-1816 408-1415 408-1415 Die for 69010 45220 45325 46516 69244 Instruction Sheet 408-1415 408-1754 408-1415 408-1413 Die for Model 1210 314592-1 314621-1 Die Assembly4 for 69365, 69365-2, 69710, 46110-2, & 69319-1 45218 45221 47811 68022 69303-2 69820 Instruction Sheet 408-1634 408-1634 408-9641 408-1634 408-1634 408-1634 Crimping Jaws for 3 68068 & 68068-3 68245-1 68268-1 Instruction Sheet 408-2564 408-2564 Die Assembly for3 69875 (on Tape) 68166-1 68169-1 69950 69951 69952 69973 Instruction Sheet 408-2254 408-2254 408-2254 408-2254 408-2254 408-2254 T-Head Instruction Sheet 408-1610 59250 Die for5 Model 2614 314833-1 354422-1 354422-26 Instruction Sheet 408-9646 408-9666 Instruction Sheet 408-9761 408-9893 408-9906 Long Handle Tool Heavy Head Tool With Foot Pedal Control 4 These dies may be used with Model 2614 Pneumatic Tool and Straight Action Adapter part number 354173-1 5 Model 2614 may be ordered with either a foot pedal or hand actuator 6 Limited wire size; see Instruction Sheet 408-9906 1 2 3 7 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Vinyl Wire Combination Charts, For Splices on Page 2 TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE ECV SOL. OR STR. WIRE COMB. CHAR T Catalog No.321519 Circular Mil Range 3,248 -- 13,100 408-1002 CU TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS 105C MAX. WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 NO. OF WIRES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 1 2 3 4 5 6 1 2 3 4 1 2 1 1 LR 7189 CERTIFIED 424 C LISTED 90C MAX. 105C MAX. NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 4-14 3-8 2-7 1-4 1-3 1 1 3-13 2-7 1-6 1-4 1-2 1 1 2-12 1-6 1-5 1-3 1-2 1 1 1-11 1-6 1-5 1-3 1-2 1 -- 1-10 1-5 1-4 1-3 1-2 1 -- 1-9 1-4 1-4 1-3 1-2 1 -- 1-8 1-4 1-4 1-2 1-2 1 -- 1-7 1-4 1-3 1-2 1 -- -- 1-6 1-4 1-3 1-2 1 -- -- 1-5 1-3 1-2 1 1 -- -- 1-4 1-2 1-2 1 1 -- -- 1-3 1 1 1 1 -- -- 1-2 1 1 1 -- -- -- 1 1 1 1 -- -- -- 4-14 3-7 2-7 1-4 1-2 1 1 2-11 1-6 1-6 1-4 1-2 1 1 1-10 1-5 1-4 1-3 1-2 1 -- 1-9 1-4 1-3 1-2 1-2 1 -- 1-7 1-3 1-3 1-2 1 1 -- 1-4 1-2 1-3 1 1 1 -- 1-2 1 1 1 1 -- -- 2-14 1-7 1-6 1-4 1-2 1 1 1-11 1-7 1-5 1-3 1-2 1 -- 1-9 1-6 1-4 1-3 1-2 1 -- 1-7 1-3 1-3 1-2 1 1 -- 1-4 1-2 1-2 1 1 -- -- 1-2 1 1 1 -- -- -- 1-14 1-7 1-6 1-4 1-2 1 1 1-9 1-5 1-4 1-3 1 1 -- 1-6 1-3 1-3 1-2 1 -- -- 1-2 1-2 1 1 -- -- -- 1-12 1-7 1-5 1-3 1-2 1 -- 1-7 1-4 1-3 1 1 -- -- 1-7 1-6 1-4 1-2 1 1* -- 1-3 1-2 1 1 -- -- -- Stranded wire only. *Partially closing hand tools to "oval" splice permits use of solid wires in these combinations. Catalog No.320788 & 55808-1 Circular Mil Range 10,320 -- 20,820 Strip Length-- 18.26 mm [.719 in.] Min.-- 19.84 mm [.781 in.] Max. Strip Length-- 14.29 mm [.563 in.] Min.-- 15.88 mm [.625 in.] Max. ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-10 SOL. OR STR. 600 Volt Max. Building Wiring 1000 Volt Max. Fixtures & Signs 408-1008 Use "18-8 ECV " Tooling Use "18-10 ECV-- ECN or 16-10 C" Tooling 424 C LISTED TYPE ECV SOL. OR STR. WIRE COMB. CHAR T WIRE SIZE NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 NO. 80 ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 18-8 SOL. OR STR. 600 Volt Max. Building Wiring 1000 Volt Max. Fixtures & Signs NO. OF WIRES 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 1 2 3 4 1 2 1 1 LR 7189 CERTIFIED 90C MAX. NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 NO. 8 6-11 4-7 3-4 2 1 1 5-10 3-6 2-4 2 1 1 4-9 3-6 2-3 1-2 1 -- 3-8 2-5 1-3 1-2 1 -- 2-7 1-4 1-3 1 1 -- 1-6 1-4 1-2 1 1 -- 1-5 1-3 1-2 1 -- -- 1-4 1-3 1 1 -- -- 1-3 1-2 1 -- -- -- 1-2 1 1 -- -- -- 1 1 -- -- -- -- 5-11 3-6 2-4 2 1 1 4-9 2-5 2-3 1-2 1 -- 2-8 1-4 1-3 1 1 -- 1-6 1-3 1-2 1 1 -- 1-4 1-2 1 1 -- -- 1-3 1 1 -- -- -- 1 -- -- -- -- -- 4-10 3-6 2-4 1-2 1 1 2-7 1-4 1-3 1 1 -- 1-5 1-3 1-2 1 -- -- 1-2 1 1 -- -- -- 3-8 2-5 1-3 1-2 1 -- 1-4 1-3 1 1 -- -- 1-6 1-4 1-2 1 1* -- 1-2 1 1 -- -- -- *Two No. 10 wires to be stranded only. INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. Minimum loading is seven No. 18 wires. INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. Minimum loading is five No. 22 wires. 8 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Vinyl Wire Combination Charts, For Splices on Page 2 (Continued) TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS 424 C LISTED WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 NO. OF WIRES 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 1 2 3 4 5 6 1 2 3 4 1 2 1 1 CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE VS SOL. OR STR. WIRE COMB. CHAR T Catalog No.36965 Circular Mil Range 3,248 -- 13,100 408-1029 CU CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE VS SOL. OR STR. WIRE COMB. CHAR T TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS Use "18-16 ECV-- ECN or 22-14 ECV-- ECN" Tooling Strip Length-- 10.72 mm [.422 in.] Min.-- 11.51 mm [.453 in.] Max. Strip Length-- 8.33 mm [.328 in.] Min .-- 9.13 mm [.359 in.] Max. LR 7189 CERTIFIED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 4-12 3-8 2-7 1-4 1-2 1 1 3-11 2-7 1-6 1-3 1-2 1 1 2-10 1-6 1-5 1-3 1-2 1 1 1-9 1-5 1-4 1-3 1-2 1 1 1-8 1-5 1-4 1-3 1-2 1 -- 1-7 1-5 1-4 1-2 1-2 1 -- 1-6 1-4 1-3 1-2 1 1 -- 1-5 1-4 1-3 1-2 1 1 -- 1-4 1-3 1-2 1-2 1 1 -- 1-3 1-3 1-2 1 1 -- -- 1-2 1-2 1-2 1 1 -- -- 1 1-2 1-2 1 1 -- -- 3-11 2-7 2-6 1-4 1-2 1 1 2-10 1-6 1-4 1-3 1-2 1 -- 1-9 1-5 1-4 1-3 1-2 1 -- 1-8 1-4 1-3 1-3 1-2 1 -- 1-6 1-3 1-3 1-2 1 1 -- 1-3 1-2 1-2 1 1 1 -- 1-2 1 1 1 -- -- -- 2-12 2-7 1-6 1-3 1-2 1 1 1-10 1-6 1-5 1-3 1-2 1 -- 1-8 1-5 1-4 1-3 1-2 1 -- 1-6 1-3 1-3 1-2 1 1 -- 1-4 1 1-2 1 1 -- -- 1-2 1 1 1 -- -- -- 1-11 1-9 1-6 1-4 1-2 1 1 1-8 1-6 1-4 1-2 1 1 -- 1-6 1-4 1-3 1 1 -- -- 1-3 1 1 1 -- -- -- 1-10 1-7 1-5 1-3 1-2 1 -- 1-6 1-3 1-3 1 1 -- -- 1-9 1-6 1-4 1-2 1 1 -- 1-3 1-2 1 1 -- -- -- Maximum wire loading is 4.208 CMAwhen using No. 37836 crimping head. INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. Minimum loading is five No. 22 wires. ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-14 SOL. OR STR. 300 Volt Max. 90C MAX. 424 C LISTED WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 CU Catalog No.34304,36964,& 2-328375-3 Circular Mil Range 509 -- 5,180 Use "18-10 ECV-- ECN or 16-10 C" Tooling ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-10 SOL. OR STR. 300 Volt Max. 90C Max. 408-1394 NO. OF WIRES 1 2 3 4 5 1 2 3 1 2 1 1 LR 7189 CERTIFIED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 1-5 1-3 1-2 1 1 1-4 1-3 1-2 1 -- 1-3 1-2 1 1 -- 1-2 1 1 -- -- 1 1 1 -- -- 1-5 1-3 1-2 1 1 1-4 1-2 1 1 -- 1-3 1 1 -- -- 1-4 1-3 1-2 1 -- 1-2 1 1 -- -- 1-3 1-2 1 1 -- 1 1 -- -- -- AMPAPPROVED WIRE COMBINATIONS WIRE SIZE 24-14 WIRE SIZE NO. 24 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. OF WIRES 1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 1 2 1 1 NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 24 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 1-10 1-6 1-4 1-2 1 1 1-9 1-5 1-4 1-2 1 1 1-8 1-5 1-3 1-2 1 -- 1-7 1-4 1-3 1-2 1 -- 1-6 1-4 1-2 1 1 -- 1-5 1-3 1-2 1 -- -- 1-4 1-2 1 1 -- -- 1-9 1-6 1-3 1-2 1 1 1-7 1-5 1-3 1-2 1 -- 1-6 1-4 1-2 1 1 -- 1-4 1-3 1 1 -- -- 1-3 1-2 1 1 -- -- 1-7 1-4 1-3 1-2 1 1 1-6 1-3 1-2 1 1 -- 1-3 1-2 1 1 -- -- 1-7 1-5 1-3 1-2 1 -- 1-4 1-2 1 1 -- -- 1-4 1-3 1-2 1 1 -- 1-2 1 1 -- -- -- INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. 9 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Vinyl Wire Combination Charts, For Splices on Page 2 (Continued) TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS 424 C LISTED 105C MAX. WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE ECV SOL. OR STR. WIRE COMB. CHAR T 408-1395 CU Catalog No.328890 & 330021 Circular Mil Range 3,248 -- 4,872 TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE VS SOL. OR STR. WIRE COMB. CHAR T Catalog No.34306,34349 & 34864 Circular Mil Range 3,248 -- 4,872 Use "18-16 EC" Tooling Use "18-16 VS or 16-14 ECV" Tooling Strip Length-- 7.94 mm [.313 in.] Min .-- 8.73 mm [.344 in.] Max. Strip Length-- 8.73 mm [.344 in.] Min .-- 10.32 mm [.406 in.] Max. ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-16 SOL. OR STR. 600 Volt Max. Building Wiring 1000 Volt Max. Fixtures & Signs LR 7189 CERTIFIED 90C MAX. NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 4-5 3-4 2 1 3-4 2-3 1-2 1 2-3 1-2 1 1 1-2 1 1 -- 1 1 -- -- 3-5 2-3 2 1 2-3 1-2 1 1 1-2 1 1 -- 1 -- -- -- 2-4 2 1-2 1 1-2 1 1 -- 1-3 1-2 1 -- NO. OF WIRES 1 2 3 4 5 1 2 3 4 1 2 1 INSTRUCTIONS: Twist wires together before crimping. Minimum loading is five No. 22 wires. TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-16 SOL. OR STR. 300 Volt Max. 90C Max. 424 C LISTED WIRE SIZE NO. OF WIRES 1 2 3 4 1 2 3 1 2 1 NO. 22 NO. 20 NO. 18 NO. 16 408-1396 LR 7189 CERTIFIED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 4* 3 2 1 3* 2 2 1 2* -- 1 -- 1* 1 1 -- 4* 3 2 1 2* -- 1 1 1* 1 -- -- 3* 2 1-2 1 1* 1 1 -- 1-2 1-2 1 -- *Solid wire only. INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE ECV SOL. OR STR. WIRE COMB. CHAR T 408-2228 Catalog No.50920 Circular Mil Range 3,248 -- 4,872 Use "18-16" ECVG Tooling Strip Length-- 10.32 mm [.406 in.] Min.-- 11.91 mm [.469 in.] Max. 424 C LISTED 105C MAX. WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-16 SOL. OR STR. 600 Volt Max.Building Wiring 1000 Volt Max. Fixtures & Signs NO. OF WIRES 1 2 3 4 1 2 3 1 2 1 LR 7189 CERTIFIED 90C MAX. NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 4 3 2 1 3 2 2 1 2 2 1 -- 1 1 1 -- 4 3 2 1 2 2 1 1 1 1 -- -- 3 2 1-2 1 1 1 1 -- 1-2 1-2 1 -- INSTRUCTIONS: Twist wires together before crimping. 10 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Vinyl Wire Combination Charts, For Splices on Page 2 (Continued) TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS 424 C LISTED WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 NO. OF WIRES 1 2 3 4 5 6 7 8 9 1 2 3 1 2 3 1 2 1 2 1 1 CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE VS SOL. OR STR. WIRE COMB. CHAR T Catalog No.34308 & 34865 Circular Mil Range 5,180 -- 13,100 408-1397 CU TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE ECV STRANDED WIRE COMB. CHART Catalog No.329251 & 53234-1 Circular Mil Range 3,248 -- 11,400 Use "18-10 VS or 12-10 ECV" Tooling Use "18-10 EC" Tooling Strip Length -- 11.11 mm [.438 in.] Min.-- 12.70 mm [.500 in.] Max. Strip Length-- 10.72 mm [.422 in.] Min.-- 11.51 mm [.453 in.] Max. ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-10 SOL. OR STR. 300 Volt Max. 90C Max. LR 7189 CERTIFIED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 7 5-6 3-5 2-3 2 1 1 6 4-5 3-4 2-3 1-2 1 1 5 4 2-3 2 1 1 -- 4 3-4 2-3 1-2 1 1 -- 3 2-3 2 1-2 1 -- -- 2 1-2 1 1 1 -- -- 1 1 1 1 1 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 6-7 5-6 3-4 2 2 1 1 5-6 4-5 2-4 2-3 1 1 1 4-5 3-4 2-3 1-2 1 1 -- 6 4-5 3-5 2 1-2 1 1* 3-5 2-4 2-4 1-2 1 1 -- 1-4 1-3 1-3 1 1 1 -- 4-6 3-4 2-3 1-3 1-2 1 1* 1-4 1-4 1-3 1-2 1 1 -- 2-5 2-4 1-3 1-2 1 1* -- 1-3 1-2 1-2 1 1 -- -- 1-4 1-3 1-3 1 1* -- -- 1-2 1 1* 1* -- -- -- *Partially closing hand tools to "oval" splice permits use of solid wires in these combinations. INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. Minimum loading is eight No. 22 ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-12 STR. 1000 Volt Max. Fixtures & Signs 600 Volt Max. Building Wiring 424 C LISTED 105C MAX. WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. OF WIRES 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 1 2 3 4 1 2 3 1 2 1 408-1479 LR 7189 CERTIFIED 90C MAX. NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 4-13 3-9 2-6 1-4 1-2 1 3-12 2-8 2-5 1-3 1-2 1 2-11 1-7 1-5 1-3 1-2 1 1-10 1-6 1-4 1-3 1-2 1 1-9 1-6 1-4 1-3 1 1 1-8 1-5 1-4 1-2 1 1 1-7 1-5 1-3 1-2 1 1 1-6 1-4 1-2 1-2 1 -- 1-5 1-3 1-2 1 1 -- 1-4 1-3 1-2 1 1 -- 1-3 1-2 1 -- -- -- 4-11 3-9 2-6 1-4 1-2 1 2-9 2-8 1-5 1-3 1-2 1 1-8 1-7 1-4 1-2 1-2 1 1-7 1-6 1-4 1-2 1 1 3-10 2-8 1-6 1-3 1-2 1 1-9 1-7 1-5 1-3 1 1 1-8 1-5 1-4 1-2 1 1 1-7 1-4 1-3 1 1 -- 1-9 1-7 1-5 1-3 1-2 1 1-6 1-5 1-3 1-2 1 -- 1-5 1-3 1-2 1 -- -- 1-10 1-7 1-4 1-2 1 1 1-4 1-3 1 1 -- -- 1-6 1-4 1-3 1 1 -- INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. Minimum loading is five No. 22 wires. 11 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Vinyl Wire Combination Charts, For Splices on Page 2 (Continued) TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE ECV SOL. OR STR. WIRE COMB. CHAR T Catalog No.53891-1 Circular Mil Range 19,500 -- 42,700 CU TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS Strip Length--18.26 mm [.719 in.] Min.-- 19.84 mm [.781 in.] Max. 105C MAX. WIRE SIZE NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 NO. 8 NO. 6 NO. OF WIRES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 1 2 1 408-9850 Catalog No.55843-1 Circular Mil Range 509 -- 5,180 CU Use "18-16 ECV-- ECN or 22-14 ECV-- ECN" Tooling Use "18-6 ECV" Tooling 424 C LISTED CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE ECV SOL. OR STR. WIRE COMB. CHAR T 408-2605 Strip Length-- 8.33 mm [.328 in.] Min .-- 9.13 mm [.359 in.] Max. ULLISTED WIRE COMBINATIONS WIRE SIZE 18-6 SOL. OR STR. 600 Volt Max. Building Wiring 1000 Volt Max. Fixtures & Signs ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-14 SOL. OR STR. 600 Volt Max. Building Wiring 1000 Volt Max. Fixtures & Signs 105C [221F] Max. 424 C LISTED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 NO. 8 NO. 6 12-15 7-13 5-7 3-5 2-3 2 1 11-14 7-12 4-7 3-5 2-3 1-2 1 10-13 6-11 4-7 3-5 2-3 1-2 1 9-12 6-10 4-6 2-5 2-3 1-2 1 8-11 5-9 3-6 2-5 2-3 1-2 1 7-10 4-9 3-5 2-4 1-3 1 1 6-9 4-8 2-5 2-4 1-2 1 -- 5-8 3-7 2-4 1-4 1-2 1 -- 4-7 2-6 2-4 1-4 1 1 -- 3-6 2-5 1-3 1-3 1 1 -- 2-5 1-5 1-3 1-3 1 1 -- 1-4 1-4 1-2 1-2 1 -- -- 1-3 1-3 1 1 -- -- -- 1-2 1-2 1 -- -- -- -- 1 1 -- -- -- -- -- 11-15 7-13 5-7 3-5 2-3 2 1 9-14 6-12 4-7 3-5 2-3 1-2 1 8-13 5-11 3-6 2-5 2-3 1-2 1 6-12 4-10 3-6 2-4 1-3 1 1 5-11 3-9 2-5 2-4 1-2 1 1 3-9 2-8 1-5 1-3 1 1 -- 1-8 1-7 1-4 1-3 1 -- -- 1-7 1-6 1-3 1-2 1 -- -- 1-6 1-5 1-3 1-2 1 -- -- 1-4 1-4 1-2 1 -- -- -- 1-3 1-3 1 1 -- -- -- 1-2 1-2 1 -- -- -- -- 1 1 -- -- -- -- -- 10-14 6-12 4-7 3-5 2-3 1-2 1 7-12 5-10 3-6 2-5 2-3 1-2 1 5-11 3-9 2-5 2-4 1-2 1 1 2-9 2-7 1-4 1-3 1-2 1 -- 1-7 1-6 1-3 1-2 1 -- -- 1-5 1-4 1-2 1 1 -- -- 1-3 1-2 1 -- -- -- -- 8-13 6-11 4-6 2-5 2-3 1 1 4-12 3-9 2-5 1-4 1-2 1 1 1-11 1-7 1-4 1-3 1-2 1 -- 1-9 1-5 1-3 1-2 1 -- -- 1-5 1-3 1-2 1 -- -- -- 6-12 4-9 3-6 2-4 1-3 1 1 1-8 1-5 1-4 1-3 1-2 1 -- 1-6 1-4 1-2 1 1 -- -- 2-11 2-6 1-4 1-3 1-2 -- -- 1-5 1-2 1-2 -- -- -- -- 1-6 1-5 1-3 1-2 1 -- -- WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. OF WIRES 1 2 3 4 5 1 2 3 1 2 1 1 LR 7189 CERTIFIED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 1-5 1-3 1-2 1 1 1-4 1-3 1-2 1 -- 1-3 1-2 1 1 -- 1-2 1 1 -- -- 1 1 1 -- -- 1-5 1-3 1-2 1 1 1-4 1-2 1 1 -- 1-3 1 1 -- -- 1-4 1-3 1-2 1 -- 1-2 1 1 -- -- 1-3 1-2 1 1 -- 1 1 -- -- -- AMPAPPROVED WIRE COMBINATIONS WIRE SIZE 22-14 WIRE SIZE NO. 24 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. OF WIRES 1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 1 2 1 1 NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 24 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 1-10 1-6 1-4 1-2 1 1 1-9 1-5 1-4 1-2 1 1 1-8 1-5 1-3 1-2 1 -- 1-7 1-4 1-3 1-2 1 -- 1-6 1-4 1-2 1 1 -- 1-5 1-3 1-2 1 -- -- 1-4 1-2 1 1 -- -- 1-9 1-6 1-3 1-2 1 1 1-7 1-5 1-3 1-2 1 -- 1-6 1-4 1-2 1 1 -- 1-4 1-3 1 1 -- -- 1-3 1-2 1 1 -- -- 1-7 1-4 1-3 1-2 1 1 1-6 1-3 1-2 1 1 -- 1-3 1-2 1 1 -- -- 1-7 1-5 1-3 1-2 1 -- 1-4 1-2 1 1 -- -- 1-4 1-3 1-2 1 1 -- 1-2 1 1 -- -- -- INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. Minimum loading is thirteen No. 18 wires. 12 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Nylon Wire Combination Charts, For Splices on Page 3 TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE EC SOL. OR STR. WIRE COMB. CHAR T (Solid or Stranded Wire) Catalog No.328730, 53915-1,53915-4 Circular Mil Range 3,248 -- 13,100 408-1003 CU TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. OF WIRES 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 1 2 3 1 2 408-1003 CU Strip Length-- 10.72 mm [.422 in.] Min.-- 11.51 mm [.453 in.] Max. Strip Length--10.72 mm [.422 in.] Min.-- 11.51 mm [.453 in.] Max. 424 C LISTED 105C MAX. (Solid or Stranded Wire) Catalog No.328730, 53915-1,53915-4 Circular Mil Range 3,248 -- 13,100 Use "18-10 EC" Tooling Use "18-10 EC" Tooling ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-16 STR. 600 Volt Max.Building Wiring 1000 Volt Max.Fixtures & Signs CLOSED END SPLICE PRESSURE TYPE SOL. OR STR. WIRE COMB. CHAR T LR 7189 CERTIFIED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 4-12 3-11 2-7 1-4 3-11 2-10 1-6 1-3 2-10 1-9 1-6 1-3 1-9 1-7 1-5 1-3 1-8 1-6 1-5 1-3 1-7 1-5 1-5 1-2 1-6 1-5 1-4 1-2 1-5 1-3 1-3 1-2 1-4 1-3 1-3 1-2 1-3 1-2 1-2 1 1-2 -- -- -- 1 -- -- -- -- -- -- -- 3-11 3-10 2-7 1-4 2-10 2-9 1-6 1-3 1-9 1-8 1-6 1-3 1-8 1-7 1-4 1-3 1-6 1-6 1-4 1-2 1-3 1-5 1-3 1-2 1-2 1-4 1-3 1 3-12 2-9 1-7 1-3 1-10 1-7 1-6 1-3 1-9 1-6 1-5 1-2 1-11 1-8 1-6 1-3 1-9 1-5 1-3 1-2 424 C LISTED 105C MAX. WIRE SIZE NO. 22 NO. 20 NO. 18 INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. Minimum loading is five No. 22 wires. NO. 16 NO. 14 NO. 12 NO. 10 NO. OF WIRES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 1 2 3 4 5 6 1 2 3 4 1 2 1 1 ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-10 300 Volt Max. 105 C Max. LR 7189 CERTIFIED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 4-14 3-8 2-7 1-4 1-2 1 1 3-13 2-7 1-6 1-3 1-2 1 1 2-12 1-6 1-5 1-3 1-2 1 1 1-11 1-5 1-4 1-3 1-2 1 1 1-10 1-5 1-4 1-3 1-2 1 -- 1-9 1-5 1-4 1-2 1-2 1 -- 1-8 1-4 1-3 1-2 1 1 -- 1-7 1-4 1-3 1-2 1 1 -- 1-6 1-3 1-2 1-2 1 1 -- 1-5 1-3 1-2 1 1 -- -- 1-4 1-2 1-2 1 1 -- -- 1-3 1-2 1-2 1 1 -- -- 1-2 1 1 -- -- -- -- 1 1 1 -- -- -- -- -- 1 -- -- -- -- -- 3-11 2-7 2-6 1-4 1-2 1 1 2-10 1-6 1-4 1-3 1-2 1 -- 1-9 1-5 1-4 1-3 1-2 1 -- 1-8 1-4 1-3 1-3 1-2 1 -- 1-6 1-3 1-3 1-2 1 1 -- 1-3 1-2 1-2 1 1 1 -- 1-2 1 1 1 -- -- -- 2-12 2-7 1-6 1-3 1-2 1 1 1-10 1-6 1-5 1-3 1-2 1 -- 1-8 1-5 1-4 1-3 1-2 1 -- 1-6 1-3 1-3 1-2 1 1 -- 1-3 1 1-2 1 1 -- -- 1-2 1 1 1 -- -- -- 1-11 1-9 1-6 1-4 1-2 1 1* 1-8 1-6 1-4 1-3 1 1 -- 1-6 1-4 1-3 1-2 1 -- -- 1-3 1 1 1 -- -- -- 1-10 1-7 1-5 1-3 1-2 1 -- 1-6 1-3 1-3 1 1 -- -- 1-9 1-6 1-4 1-2 1 1* -- 1-3 1-2 1 1 -- -- -- *Partially closing hand tools to "oval" splice permits use of solid wires in these combinations. 13 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Nylon Wire Combination Charts, For Splices on Page 3 (Continued) CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE ECN SOL. OR STR. WIRE COMB. CHAR T TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS 408-1271 CU Catalog No.35115 Circular Mil Range 509 -- 5,180 TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS Use "18-16 ECV-- ECN or 22-14 ECV-- ECN" Tooling 424 C LISTED WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. OF WIRES 1 2 3 4 5 1 2 3 1 2 1 1 LR 7189 CERTIFIED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 1-5 1-3 1-2 1 1 1-4 1-3 1-2 1 -- 1-3 1-2 1 1 -- 1-2 1 1 -- -- 1 1 1 -- -- 1-5 1-3 1-2 1 1 1-4 1-2 1 1 -- 1-3 1 1 -- -- 1-4 1-3 1-2 1 -- 1-2 1 1 -- -- 1-3 1-2 1 1* -- 1 1 -- -- -- NO. 24 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 24 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 1-10 1-6 1-4 1-2 1 1 1-9 1-5 1-4 1-2 1 1 1-8 1-5 1-3 1-2 1 -- 1-7 1-4 1-3 1-2 1 -- 1-6 1-4 1-2 1 1 -- 1-5 1-3 1-2 1 -- -- 1-4 1-2 1 1 -- -- 1-9 1-6 1-3 1-2 1 1 1-7 1-5 1-3 1-2 1 -- 1-6 1-4 1-2 1 1 -- 1-4 1-3 1 1 -- -- 1-3 1-2 1 1 -- -- 1-7 1-4 1-3 1-2 1 1 1-6 1-3 1-2 1 1 -- 1-3 1-2 1 1 -- -- 1-7 1-5 1-3 1-2 1 -- 1-4 1-2 1 1 -- -- 1-4 1-3 1-2 1 1* -- 1-2 1 1 -- -- -- *Partially closing hand tools to "oval" splice permits use of solid wires in these combinations. INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-10 SOL. OR STR. 300 Volt Max. 105C Max. 424 C LISTED WIRE SIZE NO. 22 AMPAPPROVED WIRE COMBINATIONS WIRE SIZE 24-14 SOL. OR STR. NO. OF WIRES 1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 1 2 1 1 CU Strip Length--10.72 mm [.422 in.] Min.-- 11.51 mm [.453 in.] Max. NOTE: Two No. 18 solid wires must be twisted. WIRE SIZE Catalog No.35653 Circular Mil Range 3,248 -- 13,100 408-1021 Use "18-10 ECV-- ECN or 16-10 C" Tooling Strip Length--8.33 mm [.328 in.] Min.-- 9.13 mm [.359 in.] Max. ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-14 SOL. OR STR. 300 Volt Max. 105C MAX. CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE ECN SOL. OR STR. WIRE COMB. CHAR T NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 NO. OF WIRES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 1 2 3 4 5 6 1 2 3 4 1 2 1 1 LR 7189 CERTIFIED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 4-16 3-9 2-7 1-4 1-2 1 1 3-15 2-8 1-6 1-4 1-2 1 1 2-14 1-6 1-5 1-3 1-2 1 1 1-13 1-5 1-4 1-3 1-2 1 1 1-12 1-4 1-3 1-3 1-2 1 1 1-11 1-4 1-3 1-2 1-2 1 1 1-10 1-3 1-3 1-2 1-2 1 1 1-9 1-3 1-3 1-2 1 1 -- 1-8 1-3 1-2 1 1 1 -- 1-7 1-2 1-2 1 1 -- -- 1-6 1-2 1-2 1 1 -- -- 1-5 1-2 1-2 1 1 -- -- 1-4 1-2 1-2 1 -- -- -- 1-3 1 1 1 -- -- -- 1-2 1 1 1 -- -- -- 1 1 1 -- -- -- -- 3-16 3-7 2-4 1-4 1-2 1 1 2-13 2-6 1-4 1-3 1-2 1 1 1-9 1-5 1-4 1-2 1-2 1 -- 1-6 1-4 1-2 1-2 1 1 -- 1-4 1-3 1-2 1-2 1 1 -- 1-3 1-2 1 1 1 1 -- 1-2 1 1 1 -- -- -- 2-16 2-7 1-6 1-4 1-2 1 1 1-9 1-4 1-5 1-2 1-2 1 1 1-8 1-4 1-4 1-2 1-2 1 -- 1-4 1-2 1-3 1 1 1 -- 1-3 1 1-2 1 1 -- -- 1-2 1 1 1 -- -- -- 1-15 1-6 1-5 1-4 1-2 1 -- 1-8 1-3 1-3 1-3 1 1 -- 1-5 1-3 1-2 1-2 1 -- -- 1-2 1-2 1 1 -- -- -- 1-12 1-5 1-5 1-3 1-2* 1 -- 1-7 1-3 1-3 1 1* -- -- 1-9 1-6 1-4 1-2 1 1* -- 1-6 1-2 1 1 -- -- -- *Partially closing hand tools to "oval" splice permits use of solid wires in these combinations. INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. Minimum loading is five No. 22 wires. 14 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Nylon Wire Combination Charts, For Splices on Page 3Helvetica (Continued) Specific Product Name_12 Hel. Con. Bold (Continued)_9pt Lt Condensed TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- STRANDED WIRE COMB. CHART Catalog No.54316-1 Circular Mil Range 3,248 -- 11,400 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. OF WIRES 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 1 2 3 4 1 2 3 1 2 1 CU TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE ECN SOL. OR STR. WIRE COMB. CHAR T Use "18-10 EC" Tooling Use "18-10 ECV-- ECN or 22-14 ECN" Tooling Strip Length-- 8.33 mm [.328 in.] Min .-- 9.13 mm [.359 in.] Max. ULLISTED WIRE COMBINATIONS WIRE SIZE 22-12 STR. 300 Volt Max. 150C Max. ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-10 SOL. OR STR. 300 Volt Max. 150C Max. 424 C LISTED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 4-13 3-9 2-6 1-4 1-2 1 3-12 2-8 2-5 1-3 1-2 1 2-11 1-7 1-5 1-3 1-2 1 1-10 1-6 1-4 1-3 1-2 1 1-9 1-6 1-4 1-3 1 1 1-8 1-5 1-4 1-2 1 1 1-7 1-5 1-3 1-2 1 1 1-6 1-4 1-2 1-2 1 -- 1-5 1-3 1-2 1 1 -- 1-4 1-3 1-2 1 1 -- 1-3 1-2 1 -- -- -- 4-11 3-9 2-6 1-4 1-2 1 2-9 2-8 1-5 1-3 1-2 1 1-8 1-7 1-4 1-2 1-2 1 1-7 1-6 1-4 1-2 1 1 3-10 2-8 1-6 1-3 1-2 1 1-9 1-7 1-5 1-3 1 1 1-8 1-5 1-4 1-2 1 1 1-7 1-4 1-3 1 1 -- 1-9 1-7 1-5 1-3 1-2 1 1-6 1-5 1-3 1-2 1 -- 1-5 1-3 1-2 1 -- -- 1-10 1-7 1-4 1-2 1 1 1-4 1-3 1 1 -- -- 1-6 1-4 1-3 1 1 -- INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. Minimum loading is five No. 22 wires. WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. OF WIRES 1 2 3 4 5 1 2 3 1 2 1 1 408-8806 CU Catalog No.55927-1 Circular Mil Range 509 -- 5,180 Strip Length--10.72 mm [.422 in.] Min.-- 11.51 mm [.453 in.] Max. 424 C LISTED WIRE SIZE 408-2907 LR 7189 CERTIFIED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 1-5 1-3 1-2 1 1 1-4 1-3 1-2 1 -- 1-3 1-2 1 1 -- 1-2 1 1 -- -- 1 1 1 -- -- 1-5 1-3 1-2 1 1 1-4 1-2 1 1 -- 1-3 1 1 -- -- 1-4 1-3 1-2 1 -- 1-2 1 1 -- -- 1-3 1-2 1 1* -- 1 1 -- -- -- NOTE: Two No.18 solid wires must be twisted. AMPAPPROVED WIRE COMBINATIONS WIRE SIZE 24-14 SOL. OR STR. WIRE SIZE NO. 24 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. OF WIRES 1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 1 2 1 1 NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 24 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 1-10 1-6 1-4 1-2 1 1 1-9 1-5 1-4 1-2 1 1 1-8 1-5 1-3 1-2 1 -- 1-7 1-4 1-3 1-2 1 -- 1-6 1-4 1-2 1 1 -- 1-5 1-3 1-2 1 -- -- 1-4 1-2 1 1 -- -- 1-9 1-5 1-3 1-2 1 1 1-6 1-4 1-3 1-2 1 -- 1-5 1-3 1-2 1 1 -- 1-4 1-2 1 1 -- -- 1-3 1 1 1 -- -- 1-7 1-4 1-3 1-2 1 1 1-6 1-3 1-2 1 1 -- 1-3 1-2 1 1 -- -- 1-7 1-5 1-3 1-2 1 -- 1-4 1-2 1 1 -- -- 1-4 1-3 1-2 1 1* -- 1-2 1 1 -- -- -- *Partially closing hand tools to "oval" splice permits use of solid wires in these combinations. INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. 15 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967 Closed End Splices Nylon Wire Combination Charts, For Splices on Page 3 (Continued) TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS 424 C LISTED WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. OF WIRES 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 1 2 3 1 2 CLOSED END SPLICE PRESSURE TYPE WIRE CONNECTORS-- TYPE EC SOL. OR STR. WIRE COMB. CHAR T Catalog No.55929-1 Circular Mil Range 3,248 -- 13,100 408-8807 CU TO BE SOLD ONLY WITH INSTALLATION INSTRUCTIONS CLOSED END SPLICE PRESSURE TYPE SOL. OR STR. WIRE COMB. CHAR T Catalog No.55929-1 Circular Mil Range 3,248 -- 13,100 Use "18-10 EC" Tooling Use "18-10 EC" Tooling Strip Length-- 10.72 mm [.422 in.] Min .-- 11.51 mm [.453 in.] Max. Strip Length-- 10.72 mm [.422 in.] Min.-- 11.51 mm [.453 in.] Max. ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-16 STR. 600 Volt Max.Building Wiring 1000 Volt Max.Fixture & Signs 150C [302F] Max. ULLISTED AND CSACERTIFIED WIRE COMBINATIONS WIRE SIZE 22-10 STR. 300 Volt Max. 150C [302F] Max. LR 7189 CERTIFIED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 4-12 3-11 2-7 1-4 3-11 2-10 1-6 1-3 2-10 1-9 1-6 1-3 1-9 1-7 1-5 1-3 1-8 1-6 1-5 1-3 1-7 1-5 1-5 1-2 1-6 1-5 1-4 1-2 1-5 1-3 1-3 1-2 1-4 1-3 1-3 1-2 1-3 1-2 1-2 1 1-2 -- -- -- 1 -- -- -- -- -- -- -- 3-11 3-10 2-7 1-4 2-10 2-9 1-6 1-3 1-9 1-8 1-6 1-3 1-8 1-7 1-4 1-3 1-6 1-6 1-4 1-2 1-3 1-5 1-3 1-2 1-2 1-4 1-3 1 3-12 2-9 1-7 1-3 1-10 1-7 1-6 1-3 1-9 1-6 1-5 1-2 1-11 1-8 1-6 1-3 1-9 1-5 1-3 1-2 424 C LISTED WIRE SIZE NO. 22 NO. 20 NO. 18 INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field applications, twist wires together before crimping. Minimum loading is five No. 22 wires. NO. 16 NO. 14 NO. 12 NO. 10 NO. OF WIRES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 1 2 3 4 5 6 1 2 3 4 1 2 1 1 408-8807 CU LR 7189 CERTIFIED NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 4-14 3-8 2-7 1-4 1-2 1 1 3-13 2-7 1-6 1-3 1-2 1 1 2-12 1-6 1-5 1-3 1-2 1 1 1-11 1-5 1-4 1-3 1-2 1 1 1-10 1-5 1-4 1-3 1-2 1 -- 1-9 1-5 1-4 1-2 1-2 1 -- 1-8 1-4 1-3 1-2 1 1 -- 1-7 1-4 1-3 1-2 1 1 -- 1-6 1-3 1-2 1-2 1 1 -- 1-5 1-3 1-2 1 1 -- -- 1-4 1-2 1-2 1 1 -- -- 1-3 1-2 1-2 1 1 -- -- 1-2 1 1 -- -- -- -- 1 1 1 -- -- -- -- -- 1 -- -- -- -- -- 3-11 2-7 2-6 1-4 1-2 1 1 2-10 1-6 1-4 1-3 1-2 1 -- 1-9 1-5 1-4 1-3 1-2 1 -- 1-8 1-4 1-3 1-3 1-2 1 -- 1-6 1-3 1-3 1-2 1 1 -- 1-3 1-2 1-2 1 1 1 -- 1-2 1 1 1 -- -- -- 2-12 2-7 1-6 1-3 1-2 1 1 1-10 1-6 1-5 1-3 1-2 1 -- 1-8 1-5 1-4 1-3 1-2 1 -- 1-6 1-3 1-3 1-2 1 1 -- 1-3 1 1-2 1 1 -- -- 1-2 1 1 1 -- -- -- 1-11 1-9 1-6 1-4 1-2 1 1* 1-8 1-6 1-4 1-3 1 1 -- 1-6 1-4 1-3 1-2 1 -- -- 1-3 1 1 1 -- -- -- 1-10 1-7 1-5 1-3 1-2 1 -- 1-6 1-3 1-3 1 1 -- -- 1-9 1-6 1-4 1-2 1 1* -- 1-3 1-2 1 1 -- -- -- *Partially closing hand tools to "oval" splice permits use of solid wires in these combinations. 16 Catalog 65472 Revised 04-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK:44-141-810-8967