Closed End Splices
1
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
Product Facts
For single and multiple wire
applications
Nylon or vinyl or PVF2
insulated
Temperature ratings of
90°C, 105°C, 150°C
300V, 600V or 1000V rated
Crescent crimp configura-
tion
Covers wire ranges from
24 to 6 AWG [0.2 to 16 mm2]
509 to 42,700 CMA
Copper or steel splice
material
Plated or unplated
Solid or stranded copper
wire
and approved
AMP Pre-insulated Closed
End Splices have been
designed specifically to
a n s w e r the need for inex-
pensive, insulated electrical
terminations. They can be
used in almost every type
of commercial application
where multiple wires need
to be brought together for
a reliable termination. (e.g.
large and small appliances
and the lighting industry).
The Closed End Splice
p roducts described in this
catalog accommodate wire
sizes from 24 through 6
AWG [0.2 to 16 mm2] 509
to 42,700 CMA. The appeal
of Closed End Splice pro d-
ucts lies in their bro a d
range of wire sizes, built in
p re-insulation, ease and
speed of application, uni-
f o rm re l i a b i l i t y, and low
installed cost.
As is true of all AMP termi-
nal and splice lines, careful-
ly engineered application
tooling has been developed
for the Closed End Splice
line to provide uniformly
high quality terminations.
Tool and terminal have
been designed as a team
to promote ease and speed
of application and at the
same time to provide pre-
cise crimping pressure for
every wire size combina-
tion. This connection
provides maximum
conductivity, tensile
strength, and high
resistance to corrosion.
The quality of performance,
the facility of installation
and the inherent simplicity
of Closed End Splices
make them ideal for many
industrial applications.
Need more information?
Call Technical Support at the
numbers listed below.
Technical Support is staffed
with specialists well versed
in Tyco Electronics
products. They can provide
you with:
Technical Support
Catalogs
Technical Documents
Product Samples
Tyco Electronics
Authorized Distributor
Locations
© Copyright 1994 by Tyco Electronics
All Rights Reserved.
AMP, BOMB-TAIL, CERTI-CRIMP,
AMP-TAPETRONIC are Trademarks.
Closed End Splices
Vinyl BOMB-TAIL SplicesVS, ECV
2
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
Blue .750 .173 Copper Tin VS 34306-3
19.05 4.39
22-16 408- Blue .750 .250 Copper Tin VS 34349-3
[0.3-1.4]1396 19.05 6.35
3,248-4,872
Blue .800 .215 Copper Tin VS 34864-3
20.32 5.46
408- Trans. 1.093 .255 Steel Tin ECV 50920-3
2228 27.76 6.48
22-16 Trans. 1.093 .255 Steel Tin ECV 50920-11
[0.3-1.4] 27.76 6.48
3,248-4,872 408- Trans. 1.000 .265 Steel Tin ECV 328890-32-328890-1
1395 25.40 6.73
Trans. .825 .265 Steel Tin ECV 330021-31-330021-0
20.96 6.73
Red .729 .156 Copper Tin VS 34304-3
18.52 3.96
408- Purple .740 .187 Copper Tin VS 36964-302-36964-2
1394 18.80 4.75
22-14 Purple .740 .187 Copper Tin VS 2-36964-51
[0.3-2.0]18.80 4.75
509-5,180
Purple .775 .235 Copper None VS 2-328375-3
19.69 5.97
408- Purple .900 .235 Copper None ECV 55843-1
9850 22.96 5.97
Trans. 1.500 .360 Copper None ECV 53234-1
34.10 9.14
22-12 408- Trans. 1.125 .360 Copper None ECV 3292512-329251-1
[0.3-3.0]1479 28.58 9.14
3,248-11,400
Trans. 1.125 .360 Copper None ECV 2-329251-21
28.58 9.14
408- Purple 1.010 .312 Copper Tin VS 36965-301-36965-1
1029 25.65 7.92
22-10
Purple 1.010 .312 Copper Tin VS 1-36965-31
[0.3-6.0]25.65 7.92
3,248-13,100 408- Purple 1.125 .360 Copper Tin ECV 321519-32-321519-2
1002 28.88 9.14
408- Yellow .975 .235 Copper Tin VS 34308-322-10
1397 24.76 5.97
[0.3-6.0]
Yellow 1.010 .300 Copper Tin VS 34865-3
5,180-13,100 25.65 7.62
408- Black 1.263 .500 Copper Tin ECV 55808-118-8
1008 31.08 12.70
[0.8-8.0]
Green 1.575 .500 Copper Tin ECV 320788-3
10,320-20,820 40.01 12.70
408- Blue 1.600 .500 Copper None ECV 53891-1
18-6
2605 40.64 12.70
[0.8-16]
19,500-42,700
Wire Size Range
AWG 22 to 6
[0.3 to 16 mm2],
CMA 509 to 42,700
Wire Size Wire L Opening Splice Marking* Part Numbers
[mm2] Combination Insulation Dim. Dia. Material Plating (Voltage & Temp. Loose Tape
Circular Mils Charts Color Max. Min. Rating Code) Piece Mounted
1Bulk package
L
Closed End Splices
Nylon Molded Splices ECN, EC
3
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
Wire Size Range
AWG 22 to 10
[0.3 to 6.0 mm2],
CMA 509 to 13,100
*Splice Marking
VS—300V, 90°C
ECV—600V max. Building Wiring
—1,000V max. Fixtures and Signs,
105°C UL, 90°C CSA
ECN—300V 105°C
EC—600V max. Building Wiring
—1,000V max. Fixtures and
Signs 105°C
Stranded Wire Only
†† 150°C
Type of Crimp
C—C Crimp
CC—Confined Crescent
CO—Crescent Oval
PVF2Molded Splices (Kynar)
Wire Size Wire L Opening Splice Marking* Part Numbers
[mm2] Combination Insulation Dim. Dia. Material Plating (Voltage & Temp. Loose Tape
Circular Mils Charts Color Max. Min. Rating Code) Piece Mounted
408- Trans. .680 .250 Copper Tin ECN 02-35115-11† 01-35115-0
1271 17.27 6.35
22-14 Trans. .680 .250 Copper Tin ECN 01-35115-21[0.3-2.0] 1727 6.35
509-5,180 408- Black .680 .250 Copper Tin ECN†† 2-355927-1†1 1-55927-0
8806 17.27 6.35
408- Trans. .775 .375 Copper Tin ECN 02-35653-11† 02-35653-1
1021 19.69 9.53
Trans. .775 .375 Copper Tin ECN 02-35653-21
19.69 9.53
408- Black .970 .370 Copper Tin EC†† 2-355929-1†1
22-10 8807 24.64 9.40
[0.3-6.0]
Trans. .970 .370 Copper Tin EC 02-53915-11† 02-53915-2
3,248-13,100 24.64 9.40
408- Trans. .720 .375 Copper Tin EC 2-328730-4†1 2-328730-1
1003 18.29 9.53
Trans. .720 .375 Copper Tin EC 2-328730-111
18.29 9.53
1Bulk package
Wire Size Wire L Opening Splice Marking* Part Numbers
[mm2] Combination Insulation Dim. Dia. Material Plating (Voltage & Temp. Loose Tape
Circular Mils Charts Color Max. Min. Rating Code) Piece Mounted
22-12 408- Red .955 .375 Copper Tin †† 02-54316-11
[0.3-3.0]2907 24.25 9.53
3,248-11,400
1Bulk package
L
Closed End Splices
Vinyl and Nylon To o l i n g
4
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
Manually Operated Tools
Our top-of-the-line crimping tools feature
the original CERTI-CRIMP ratcheted crimp
control. All tools are designed to exacting
specifications and manufactured using the
highest quality materials to provide long
s e rvice life for low production runs, repairs
and prototype work any application re-
quiring consistent, highly reliable termina-
tions. Models are available providing
double action, in which crimping dies trav-
e l in an arc-like path, or straight action,
which prevents possible rotation of the ter-
minal due to die arcing. A heavy-head style
terminates large heavy-gauge wire.
Heavy Head Hand Tool (HHHT)
AMP-TAPETRONIC Machine
Part No.69875
(Requires Dies)
Long Handle Tool (DAHT)
Vinyl
Tools for Loose Piece Splices For Tape
Wire Size Wire Hand Crimping Die for5Die for Die Assembly4Crimping Mounted Splices Part Numbers
[mm2] Combination Tool Head Model Model for 69365, 69365-2, Jaws Loose Tape
Circular Mils Chart for 69005 or 2614** 1210** 69710, 46110-2 for 68068 & Die Assembly Piece Mounted
(69010) & 69319-1 68068-33for 698753
45329 CC
45330 45328 CC 68022 CC 02-34306-51
Insul. Crimp CC
22-16 408-
45329 CC 45328 CC 68022 CC 02-34349-51
[03-1.4]1396
02-34864-51
3,248-4,872
22-16
408- 69820 02-50920-51
[03-1.4]
2228 Insulation 02-50920-11
3,248-4,872
Crimp C
408- 69238-1 2-328890-512-328890-1
1395 69145 C Requires Die 69303-2 C 69973 C 2-330021-511-330021-0
69239 C
02-34304-51
408- 02-36964-5102-36964-2
22-14 1394 45216 CO 4 5 2 1 7C O 354422-1CO 02-36964-51
[0.3-2.0]
408-
48087 CC* 302219C 314833-1CO 2-328375-31
509-5,180
9850
48208 C 45218 CO 69951 CO
02-55843-11
22-12 02-53234-11
[0.3-3.0]408- 46866 C 69430 C 314592-1C 47811 C 69952 C 2-329251-212-329251-1
3,248-11,400 1479 (46516) C 2-329251-21
22-10 408- 37836C02-36965-1101-36965-1
[0.3-6.0] 1029 45219-2 CO 302219C314621-1CO 45221 CO 69950 CO 01-36965-31
408- 48208 C
3,248-13,100 1002
(45220) CO 2-321519-112-321519-2
22-10 45221 CO 02-34308-11
[0.3-6.0]408- 45324 CC 45323 CC
01-34865-31
5,180-13,100 1397 (45325) CC
18-8 408- 02-55808-11
[0.8-8.0] 1008 69335 C (69244) C 68245-1CO 2-320788-21
10,320-20,820
18-6 408- 02-53891-11
[0.8-16]2605 68268-1CO
19,500-42,700
*For p/n 34304 and 36964 only (insulation crimp)
**Where listed Model 2614 or 1210 are the recommended tool
1Bulk packaged
3With foot pedal control
4These dies may be used with Model 2614 Pneumatic Tool and Straight Action Adapter part number 354173-1
5Model 2614 may be ordered with either a foot pedal or hand actuator
Closed End Splices
Nylon and Vinyl To o l i n g
5
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
Pneumatic Tools
Designed for medium production, these
semi-automatic power tools offer the
convenience of hand tools plus the
effortless precision and speed of ma-
chines. They are built for long, rugged
service and are equipped with remov-
able crimping dies for terminating a
variety of AMP products.
Pneumatic Tool
Part No.69005
or 69010
Pneumatic Tool
Model No.2614
or 1210
Pneumatic Tool
Part No. 46110-2
Pneumatic Tool
Part No. 69365-2
**Where listed Model 2614 or 1210 are the recommended tool
1Bulk packaged
3With foot pedal control
4These dies may be used with Model 2614 Pneumatic Tool and Straight Action Adapter Part Number 354173-1
5Model 2614 may be ordered with either a foot pedal or hand actuator
6Limited wire size range; see Instruction Sheet 408-9906
Nylon
PVF2Molded Splices (Kynar)
Splice Marking
VS—300V, 90°C
ECV—600V max. Building Wiring
—1,000V max. Fixtures and Signs,
105°C UL, 90°C CSA
ECN— 300V 105°C
EC—600V max. Building Wiring
—1,000V max. Fixtures and
Signs 105°C
Stranded Wire Only
†† 150°C
Type of Crimp
C—C Crimp
CC—Confined Crescent
CO— Crescent Oval
408- 45216 CO 45217CO 354422-1CO 02-35115-11† 01-35115-0
22-14 1271 48208 C 302219C 314833-1CO 45218 CO 69951 CO 01-35115-21
[0.3-2.0]
509-5.180 408- 1-55927-11† 01-55927-0
8806
408- 45219-2 CO 37836CO
302219C35653 2-35653-1
1021 48208 C (45220) CO 314621-1CO 45221 CO 69950 CO 2-35653-21
22-10 408- 1-55929-11†
[0.3-6.0] 8807
3,248-13,100
408-
01-53915-11† 01-53915-2
1003
01-53915-41†
46866 C 69430 C 354422-26C 314592-1C 47811 C 69952 C
1-328730-51† 2-328730-1
1-328730-11†
Tools for Loose Piece Splices
Wire Size Wire Hand Crimping Die for5Die for Die Assembly4For Tape Part Numbers
[mm2] Combination Tool Head Model Model for 69365, 69365-2, Mounted Splices
Loose Tape
Circular Mils Chart for 69005 or 2614** 1210** 69710, 46110-2 Die Assembly Piece Mounted
(69010) & 69319-1 698753
22-12
[0.3-3.0]408- 46866 C 69430 C 354422-26C 314592-1C 47811 C 1-54316-1
3,248-11,400 2907 (46516) C
Tools for Loose Piece Splices For Tape
Wire Size Wire Hand Crimping Die for5Die for Die Assembly4Mounted Splices Part Numbers
[mm2] Combination Tool Head Model Model for 69365, 69365-2, Loose Tape
Circular Mils Chart for 69005 or 2614** 1210** 69710, 46110-2 Die Assembly Piece Mounted
(69010) & 69319-1 698753
Closed End Splices
Spare Wire Caps and Tooling
6
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
Wire Size Range
AWG 22 to 10
[0.3 to 6.0 mm2],
CMA 509 to 13,100
Material
Copper Tin plated
Insulation Nylon
For
Unstripped
Wire
For
Stripped
Wire
Wire Wire Part Numbers Tooling
Wire Size Dimension Cap Insulation Insulation
[mm2]Style L Insulation Diameter Diameter Loose Tape Hand Die For
Circular Mils Max. Color Range Max. Piece Mounted Tool T-Head 69875
.515 Trans. .048-.075 3244841 46063-11
13.08 1.22-1.91
.515 Red .080-.115 32448512-324485-1 46063-11 68166-1
Unstripped 13.08 2.03-2.92
Wire .515 Blue .120-.145 3244861 46063-11
13.08 3.05-3.68
.515 Yellow .150-.220 3244871 46063-11
13.08 3.81-5.59
22-18 Stripped
[0.3-0.8.5]Wire .430 Red .124 328307* 473861-1 59250
509-3,248 10.92 3.15
16-14 Stripped .430 .149
[1.4-2.0]Wire 10.92 Blue 3.78 328308* 2-328308-1* 473871-1 59250 68169-1
2,050-5,180
12-10 Stripped .478 .210
[3.0-6.0]Wire 12.14 Yellow 5.33 328309* 59239-42
5,180-13,100
.515 Trans. .048-.075 3246933 46063-11
13.08 1.22-1.91
.515 Red .080-.115 3246943 46063-11
Unstripped 13.08 2.03-2.92
Wire .515 Blue .120-.145 3246953 46063-11
13.08 3.05-3.68
.515 Yellow .150-.220 3246963 46063-11
13.08 3.81-5.59
1Long Handle Tool
2Heavy Head Tool
3Moisture resistant
*See Table I
Table I: Military Cross Reference (meets MIL-T-7928)
Military AMP
Part Number Dash Class Part Number
-2 1 & 2 2-328307-1
MS 25274 -3 1 & 2 2-328308-1
2 2-328308-1
-4 1 & 2 2-328309-1
Closed End Splices
Vinyl and Nylon Tooling
7
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
Instruction Sheet
Cross Reference List Hand Instruction
Tool Sheet
45216 408-1578
45219-2 408-1578
45324 408-1544
45329 408-1544
45330 408-1552
46063 408-1510
46866 408-1539
473861408-1559
473871408-1559
48087 408-1552
48208 408-1738
59239-42408-1261
69145 408-1804
69335 408-1873
Die for Instruction
69005 Sheet
37836 408-1415
45217 408-1415
45323 408-1413
45328 408-1413
69238-1 408-1816
69239 408-1816
69430 408-1415
302219 408-1415
Die for Instruction
69010 Sheet
45220 408-1415
45325 408-1754
46516 408-1415
69244 408-1413
Die for5Instruction
Model
2614 Sheet
314833-1 408-9761
354422-1 408-9893
354422-26408-9906
Die for Instruction
Model 1210 Sheet
314592-1 408-9646
314621-1 408-9666
Die Assembly4
for 69365, 69365-2, Instruction
69710, 46110-2, Sheet
& 69319-1
45218 408-1634
45221 408-1634
47811 408-9641
68022 408-1634
69303-2 408-1634
69820 408-1634
Crimping Jaws for3Instruction
68068 & 68068-3 Sheet
68245-1 408-2564
68268-1 408-2564
Die Assembly for3Instruction
69875 (on Tape) Sheet
68166-1 408-2254
68169-1 408-2254
69950 408-2254
69951 408-2254
69952 408-2254
69973 408-2254
T-Head Instruction
Sheet
59250 408-1610
1Long Handle Tool
2Heavy Head Tool
3With Foot Pedal Control
4These dies may be used with Model 2614 Pneumatic Tool and Straight Action Adapter part number 354173-1
5Model 2614 may be ordered with either a foot pedal or hand actuator
6Limited wire size; see Instruction Sheet 408-9906
Closed End Splices
Vinyl Wire Combination Charts, For Splices on Page 2
8
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10
1 4-14 3-8 2-7 1-4 1-3 1 1
2 3-13 2-7 1-6 1-4 1-2 1 1
3 2-12 1-6 1-5 1-3 1-2 1 1
4 1-11 1-6 1-5 1-3 1-2 1
5 1-10 1-5 1-4 1-3 1-2 1
6 1-9 1-4 1-4 1-3 1-2 1
7 1-8 1-4 1-4 1-2 1-2 1
NO. 22 8 1-7 1-4 1-3 1-2 1
9 1-6 1-4 1-3 1-2 1
10 1-5 1-3 1-2 1 1
11 1-4 1-2 1-2 1 1
12 1-3 1 1 1 1
13 1-2 1 1 1
14 1 1 1 1
1 4-14 3-7 2-7 1-4 1-2 1 1
2 2-11 1-6 1-6 1-4 1-2 1 1
3 1-10 1-5 1-4 1-3 1-2 1
NO. 20 4 1-9 1-4 1-3 1-2 1-2 1
5 1-7 1-3 1-3 1-2 1 1
6 1-4 1-2 1-3 1 1 1
7 1-2 1 1 1 1
1 2-14 1-7 1-6 1-4 1-2 1 1
2 1-11 1-7 1-5 1-3 1-2 1
3 1-9 1-6 1-4 1-3 1-2 1
NO. 18 4 1-7 1-3 1-3 1-2 1 1
5 1-4 1-2 1-2 1 1
6 1-2 1 1 1
1 1-14 1-7 1-6 1-4 1-2 1 1
2 1-9 1-5 1-4 1-3 1 1
NO. 16 3 1-6 1-3 1-3 1-2 1
4 1-2 1-2 1 1
1 1-12 1-7 1-5 1-3 1-21
NO. 14 2 1-7 1-4 1-3 1 1
NO. 12 1 1-7 1-6 1-4 1-2 1 1*
NO. 10 1 1-3 1-2 1 1
424 C
LISTED
105°C
MAX.
LR 7189
CERTIFIED
90°C
MAX.
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
†Stranded wire only.
*Partially closing hand tools to “oval”
splice permits use of solid wires in
these combinations.
INSTRUCTIONS: Use as shown
for OEM applications; otherwise,
for all field applications, twist wires
together before crimping. Mini-
mum loading is five No. 22 wires.
CU
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE ECV
SOL. OR STR. WIRE COMB. CHART
Catalog No.321519
Circular Mil Range 3,24813,100
Use “18-10 ECV— ECN or 16-10 C” Tooling
Strip Length— 14.29 mm [.563 in.] Min.—
15.88 mm [.625 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-10 SOL. OR STR.
600 Volt Max. Building Wiring
1000 Volt Max. Fixtures & Signs
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 NO. 8
1 6-11 4-7 3-4 2 1 1
2 5-10 3-6 2-4 2 1 1
3 4-9 3-6 2-3 1-2 1
4 3-8 2-5 1-3 1-2 1
5 2-7 1-4 1-3 1 1
NO. 18 6 1-6 1-4 1-2 1 1
7 1-5 1-3 1-2 1
8 1-4 1-3 1 1
9 1-3 1-2 1
10 1-2 1 1
11 1 1
1 5-11 3-6 2-4 2 1 1
2 4-9 2-5 2-3 1-2 1
3 2-8 1-4 1-3 1 1
NO. 16 4 1-6 1-3 1-2 1 1
5 1-4 1-2 1 1
6 1-3 1 1
7 1
1 4-10 3-6 2-4 1-2 1 1
2 2-7 1-4 1-3 1 1
NO. 14 3 1-5 1-3 1-2 1
4 1-2 1 1
1 3-8 2-5 1-3 1-2 1
NO. 12 2 1-4 1-3 1 1
NO. 10 1 1-6 1-4 1-2 1 1*
NO. 801 1-2 1 1
424 C
LISTED
105°C
MAX.
LR 7189
CERTIFIED
90°C
MAX.
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
*Two No. 10 wires to be stranded
only. INSTRUCTIONS: Use as shown
for OEM applications; otherwise,
for all field applications, twist
wires together before crimping.
Minimum loading is seven
No. 18 wires.
TYPE ECV
SOL. OR STR. WIRE COMB. CHART
Catalog No.320788 & 55808-1
Circular Mil Range 10,32020,820
Use “18-8 ECV”Tooling
Strip Length—18.26 mm [.719 in.] Min.—
19.84 mm [.781 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 18-8 SOL. OR STR.
600 Volt Max. Building Wiring
1000 Volt Max. Fixtures & Signs
408-1002 408-1008
Closed End Splices
Vinyl Wire Combination Charts, For Splices on Page 2 (Continued)
9
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 24 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14
1 1-10 1-6 1-4 1-2 1 1
2 1-9 1-5 1-4 1-2 1 1
3 1-8 1-5 1-3 1-2 1
NO. 24 4 1-7 1-4 1-3 1-2 1
5 1-6 1-4 1-2 1 1
6 1-5 1-3 1-2 1
7 1-4 1-2 1 1
1 1-9 1-6 1-3 1-2 1 1
2 1-7 1-5 1-3 1-2 1
NO. 22 3 1-6 1-4 1-2 1 1
4 1-4 1-3 1 1
5 1-3 1-2 1 1
1 1-7 1-4 1-3 1-2 1 1
NO. 20 2 1-6 1-3 1-2 1 1
3 1-3 1-2 1 1
1 1-7 1-5 1-3 1-2 1
NO. 18 2 1-4 1-2 1 1
NO. 16 1 1-4 1-3 1-2 1 1
NO. 14 1 1-2 1 1
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10
1 4-12 3-8 2-7 1-4 1-2 1 1
2 3-11 2-7 1-6 1-3 1-2 1 1
3 2-10 1-6 1-5 1-3 1-2 1 1
4 1-9 1-5 1-4 1-3 1-2 1 1
5 1-8 1-5 1-4 1-3 1-2 1
6 1-7 1-5 1-4 1-2 1-2 1
NO. 22 7 1-6 1-4 1-3 1-2 1 1
8 1-5 1-4 1-3 1-2 1 1
9 1-4 1-3 1-2 1-2 1 1
10 1-3 1-3 1-2 1 1
11 1-2 1-2 1-2 1 1
12 1 1-2 1-2 1 1
1 3-11 2-7 2-6 1-4 1-2 1 1
2 2-10 1-6 1-4 1-3 1-2 1
3 1-9 1-5 1-4 1-3 1-2 1
NO. 20 4 1-8 1-4 1-3 1-3 1-2 1
5 1-6 1-3 1-3 1-2 1 1
6 1-3 1-2 1-2 1 1 1
7 1-2 1 1 1
1 2-12 2-7 1-6 1-3 1-2 1 1
2 1-10 1-6 1-5 1-3 1-2 1
3 1-8 1-5 1-4 1-3 1-2 1
NO. 18 4 1-6 1-3 1-3 1-2 1 1
5 1-4 1 1-2 1 1
6 1-2 1 1 1
1 1-11 1-9 1-6 1-4 1-2 1 1
2 1-8 1-6 1-4 1-2 1 1
NO. 16 3 1-6 1-4 1-3 1 1
4 1-3 1 1 1
1 1-10 1-7 1-5 1-3 1-2 1
NO. 14 2 1-6 1-3 1-3 1 1
NO. 12 1 1-9 1-6 1-4 1-2 1 1
NO. 10 1 1-3 1-2 1 1
424 C
LISTED LR 7189
CERTIFIED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
†Maximum wire loading is 4.208
CMAwhen using No. 37836
crimping head.
INSTRUCTIONS: Use as shown
for OEM applications; otherwise,
for all field applications, twist wires
together before crimping. Mini-
mum loading is five No. 22 wires.
CU
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE VS
SOL. OR STR. WIRE COMB. CHART
Catalog No.36965
Circular Mil Range 3,248 13,100
Use “18-10 ECV— ECN or 16-10 C” Tooling
Strip Length—10.72 mm [.422 in.] Min.—
11.51 mm [.453 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-10 SOL. OR STR.
300 Volt Max. 90°C Max.
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16 NO. 14
1 1-5 1-3 1-2 1 1
2 1-4 1-3 1-2 1
NO. 22 3 1-3 1-2 1 1
4 1-2 1 1
5 1 1 1
1 1-5 1-3 1-2 1 1
NO. 20 2 1-4 1-2 1 1
3 1-3 1 1
1 1-4 1-3 1-2 1
NO. 18 2 1-2 1 1
NO. 16 1 1-3 1-2 1 1
NO. 14 1 1 1
424 C
LISTED LR 7189
CERTIFIED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
INSTRUCTIONS: Use as shown
for OEM applications; otherwise,
for all field applications, twist wires
together before crimping.
CU
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE VS
SOL. OR STR. WIRE COMB. CHART
Catalog No.34304,36964,& 2-328375-3
Circular Mil Range 5095,180
Use “18-16 ECV— ECN or 22-14 ECV— ECN” Tooling
Strip Length—8.33 mm [.328 in.] Min.—
9.13 mm [.359 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-14 SOL. OR STR.
300 Volt Max. 90°C MAX.
AMPAPPROVED WIRE COMBINATIONS
WIRE SIZE 24-14
408-1029 408-1394
Closed End Splices
Vinyl Wire Combination Charts, For Splices on Page 2 (Continued)
10
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16
1 4-5 3-4 2 1
2 3-4 2-3 1-2 1
NO. 22 3 2-3 1-2 1 1
4 1-2 1 1
5 1 1
1 3-5 2-3 2 1
NO. 20 2 2-3 1-2 1 1
3 1-2 1 1
4 1
1 2-4 2 1-2 1
NO. 18 2 1-2 1 1
NO. 16 1 1-3 1-2 1
424 C
LISTED
105°C
MAX.
LR 7189
CERTIFIED
90°C
MAX.
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
INSTRUCTIONS: Twist wires
together before crimping.
Minimum loading is five
No. 22 wires.
CU
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE ECV
SOL. OR STR. WIRE COMB. CHART
Catalog No.328890 & 330021
Circular Mil Range 3,2484,872
Use “18-16 EC” Tooling
Strip Length— 7.94 mm [.313 in.] Min.—
8.73 mm [.344 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-16 SOL. OR STR.
600 Volt Max. Building Wiring
1000 Volt Max. Fixtures & Signs
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16
1 4* 3 2 1
2 3* 2 2 1
NO. 22 3 2* 1
4 1* 1 1
1 4*3 2 1
NO. 20 2 2* 1 1
3 1*1
1 3*2 1-2 1
NO. 18 2 1*1 1
NO. 16 1 1-2 1-2 1
424 C
LISTED LR 7189
CERTIFIED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
*Solid wire only.
INSTRUCTIONS: Use as shown for OEM
applications; otherwise, for all field applications,
twist wires together before crimping.
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE VS
SOL. OR STR. WIRE COMB. CHART
Catalog No.34306,34349 & 34864
Circular Mil Range 3,2484,872
Use “18-16 VS or 16-14 ECV” Tooling
Strip Length—8.73 mm [.344 in.] Min.—
10.32 mm [.406 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-16 SOL. OR STR.
300 Volt Max. 90°C Max.
408-1395 408-1396
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16
1 4 3 2 1
2 3 2 2 1
NO. 22 3 2 2 1
4 1 1 1
1 4 3 2 1
NO. 20 2 2 2 1 1
3 1 1
1 3 2 1-2 1
NO. 18 2 1 1 1
NO. 16 1 1-2 1-2 1
424 C
LISTED
105°C
MAX.
LR 7189
CERTIFIED
90°C
MAX.
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
INSTRUCTIONS: Twist wires together before crimping.
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE ECV
SOL. OR STR. WIRE COMB. CHART
Catalog No.50920
Circular Mil Range 3,2484,872
Use “18-16” ECVG Tooling
Strip Length— 10.32 mm [.406 in.] Min.—
11.91 mm [.469 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-16 SOL. OR STR.
600 Volt Max.Building Wiring
1000 Volt Max. Fixtures & Signs
408-2228
Closed End Splices
Vinyl Wire Combination Charts, For Splices on Page 2 (Continued)
11
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10
1 7 5-6 3-5 2-3 2 1 1
2 6 4-5 3-4 2-3 1-2 1 1
3 5 4 2-3 2 1 1
4 4 3-4 2-3 1-2 1 1
NO. 22 5 3 2-3 2 1-2 1
6 2 1-2 1 1 1
7 1 1 1 1 1
8 ——————
9 ——————
1 6-7 5-6 3-4 2 2 1 1
NO. 20 2 5-6 4-5 2-4 2-3 1 1 1
3 4-5 3-4 2-3 1-2 1 1
1 6 4-5 3-5 2 1-2 1 1*
NO. 18 2 3-5 2-4 2-4 1-2 1 1
3 1-4 1-3 1-3 1 1 1
1 4-6 3-4 2-3 1-3 1-2 1 1*
NO. 16 2 1-4 1-4 1-3 1-2 1 1
1 2-5 2-4 1-3 1-2 1 1*
NO. 14 2 1-3 1-2 1-2 1 1
NO. 12 1 1-4 1-3 1-3 1 1*
NO. 10 1 1-2 1 1* 1*
*Partially closing hand tools to “oval”
splice permits use of solid wires in
these combinations.
INSTRUCTIONS: Use as shown
for OEM applications; otherwise,
for all field applications, twist wires
together before crimping. Mini-
mum loading is eight No. 22
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12
1 4-13 3-9 2-6 1-4 1-2 1
2 3-12 2-8 2-5 1-3 1-2 1
3 2-11 1-7 1-5 1-3 1-2 1
4 1-10 1-6 1-4 1-3 1-2 1
5 1-9 1-6 1-4 1-3 1 1
NO. 22 6 1-8 1-5 1-4 1-2 1 1
7 1-7 1-5 1-3 1-2 1 1
8 1-6 1-4 1-2 1-2 1
9 1-5 1-3 1-2 1 1
10 1-4 1-3 1-2 1 1
11 1-3 1-2 1
1 4-11 3-9 2-6 1-4 1-2 1
2 2-9 2-8 1-5 1-3 1-2 1
NO. 20 3 1-8 1-7 1-4 1-2 1-2 1
4 1-7 1-6 1-4 1-2 1 1
1 3-10 2-8 1-6 1-3 1-2 1
2 1-9 1-7 1-5 1-3 1 1
NO. 18 3 1-8 1-5 1-4 1-2 1 1
4 1-7 1-4 1-3 1 1
1 1-9 1-7 1-5 1-3 1-2 1
NO. 16 2 1-6 1-5 1-3 1-2 1
3 1-5 1-3 1-2 1
1 1-10 1-7 1-4 1-2 1 1
NO. 14 2 1-4 1-3 1 1
NO. 12 1 1-6 1-4 1-3 1 1
INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field
applications, twist wires together before crimping. Minimum loading is five
No. 22 wires.
424 C
LISTED LR 7189
CERTIFIED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS CU
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE VS
SOL. OR STR. WIRE COMB. CHART
Catalog No.34308 & 34865
Circular Mil Range 5,18013,100
Use “18-10 VS or 12-10 ECV” Tooling
Strip Length—11.11 mm [.438 in.] Min.—
12.70 mm [.500 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-10 SOL. OR STR.
300 Volt Max. 90°C Max. 424 C
LISTED
105°C
MAX.
LR 7189
CERTIFIED
90°C
MAX.
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE ECV
STRANDED WIRE COMB. CHART
Catalog No.329251 & 53234-1
Circular Mil Range 3,24811,400
Use “18-10 EC” Tooling
Strip Length— 10.72 mm [.422 in.] Min.—
11.51 mm [.453 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-12 STR.
1000 Volt Max. Fixtures & Signs
600 Volt Max. Building Wiring
408-1397 408-1479
Closed End Splices
Vinyl Wire Combination Charts, For Splices on Page 2 (Continued)
12
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 18 NO. 16 NO. 14 NO. 12 NO. 10 NO. 8 NO. 6
1 12-15 7-13 5-7 3-5 2-3 2 1
2 11-14 7-12 4-7 3-5 2-3 1-2 1
3 10-13 6-11 4-7 3-5 2-3 1-2 1
4 9-12 6-10 4-6 2-5 2-3 1-2 1
5 8-11 5-9 3-6 2-5 2-3 1-2 1
6 7-10 4-9 3-5 2-4 1-3 1 1
7 6-9 4-8 2-5 2-4 1-2 1
NO. 18 8 5-8 3-7 2-4 1-4 1-2 1
9 4-7 2-6 2-4 1-4 1 1
10 3-6 2-5 1-3 1-3 1 1
11 2-5 1-5 1-3 1-3 1 1
12 1-4 1-4 1-2 1-2 1
13 1-3 1-3 1 1
14 1-2 1-2 1
15 1 1
1 11-15 7-13 5-7 3-5 2-3 2 1
2 9-14 6-12 4-7 3-5 2-3 1-2 1
3 8-13 5-11 3-6 2-5 2-3 1-2 1
4 6-12 4-10 3-6 2-4 1-3 1 1
5 5-11 3-9 2-5 2-4 1-2 1 1
6 3-9 2-8 1-5 1-3 1 1
NO. 16 7 1-8 1-7 1-4 1-3 1
8 1-7 1-6 1-3 1-2 1
9 1-6 1-5 1-3 1-2 1
10 1-4 1-4 1-2 1
11 1-3 1-3 1 1
12 1-2 1-2 1
13 1 1
1 10-14 6-12 4-7 3-5 2-3 1-2 1
2 7-12 5-10 3-6 2-5 2-3 1-2 1
3 5-11 3-9 2-5 2-4 1-2 1 1
NO. 14 4 2-9 2-7 1-4 1-3 1-2 1
5 1-7 1-6 1-3 1-2 1
6 1-5 1-4 1-2 1 1
7 1-3 1-2 1
1 8-13 6-11 4-6 2-5 2-3 1 1
2 4-12 3-9 2-5 1-4 1-2 1 1
NO. 12 3 1-11 1-7 1-4 1-3 1-2 1
4 1-9 1-5 1-3 1-2 1
5 1-5 1-3 1-2 1
1 6-12 4-9 3-6 2-4 1-3 1 1
NO. 10 2 1-8 1-5 1-4 1-3 1-2 1
3 1-6 1-4 1-2 1 1
NO. 8 1 2-11 2-6 1-4 1-3 1-2
2 1-5 1-2 1-2
NO. 6 1 1-6 1-5 1-3 1-2 1
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 24 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14
1 1-10 1-6 1-4 1-2 1 1
2 1-9 1-5 1-4 1-2 1 1
3 1-8 1-5 1-3 1-2 1
NO. 24 4 1-7 1-4 1-3 1-2 1
5 1-6 1-4 1-2 1 1
6 1-5 1-3 1-2 1
7 1-4 1-2 1 1
1 1-9 1-6 1-3 1-2 1 1
2 1-7 1-5 1-3 1-2 1
NO. 22 3 1-6 1-4 1-2 1 1
4 1-4 1-3 1 1
5 1-3 1-2 1 1
1 1-7 1-4 1-3 1-2 1 1
NO. 20 2 1-6 1-3 1-2 1 1
3 1-3 1-2 1 1
1 1-7 1-5 1-3 1-2 1
NO. 18 2 1-4 1-2 1 1
NO. 16 1 1-4 1-3 1-2 1 1
NO. 14 1 1-2 1 1
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16 NO. 14
1 1-5 1-3 1-2 1 1
2 1-4 1-3 1-2 1
NO. 22 3 1-3 1-2 1 1
4 1-2 1 1
5 1 1 1
1 1-5 1-3 1-2 1 1
NO. 20 2 1-4 1-2 1 1
3 1-3 1 1
1 1-4 1-3 1-2 1
NO. 18 2 1-2 1 1
NO. 16 1 1-3 1-2 1 1
NO. 14 1 1 1
424 C
LISTED LR 7189
CERTIFIED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
INSTRUCTIONS: Use as shown
for OEM applications; otherwise,
for all field applications, twist wires
together before crimping.
CU
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE ECV
SOL. OR STR. WIRE COMB. CHART
Catalog No.55843-1
Circular Mil Range 5095,180
Use “18-16 ECV— ECN or 22-14 ECV— ECN”
Tooling
Strip Length— 8.33 mm [.328 in.] Min.—
9.13 mm [.359 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-14 SOL. OR STR.
600 Volt Max. Building Wiring
1000 Volt Max. Fixtures & Signs
105°C [221°F] Max.
AMPAPPROVED WIRE COMBINATIONS
WIRE SIZE 22-14
424 C
LISTED
105°C
MAX.
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS CU
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE ECV
SOL. OR STR. WIRE COMB. CHART
Catalog No.53891-1
Circular Mil Range 19,50042,700
Use “18-6 ECV” Tooling
Strip Length—18.26 mm [.719 in.] Min.—
19.84 mm [.781 in.] Max.
ULLISTED WIRE COMBINATIONS
WIRE SIZE 18-6 SOL. OR STR.
600 Volt Max. Building Wiring
1000 Volt Max. Fixtures & Signs
INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field
applications, twist wires together before crimping. Minimum loading is thir-
teen No. 18 wires.
408-2605 408-9850
Closed End Splices
Nylon Wire Combination Charts, For Splices on Page 3
13
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10
1 4-14 3-8 2-7 1-4 1-2 1 1
2 3-13 2-7 1-6 1-3 1-2 1 1
3 2-12 1-6 1-5 1-3 1-2 1 1
4 1-11 1-5 1-4 1-3 1-2 1 1
5 1-10 1-5 1-4 1-3 1-2 1
6 1-9 1-5 1-4 1-2 1-2 1
7 1-8 1-4 1-3 1-2 1 1
NO. 22 8 1-7 1-4 1-3 1-2 1 1
9 1-6 1-3 1-2 1-2 1 1
10 1-5 1-3 1-2 1 1
11 1-4 1-2 1-2 1 1
12 1-3 1-2 1-2 1 1
13 1-2 1 1
14 1 1 1
15 1
1 3-11 2-7 2-6 1-4 1-2 1 1
2 2-10 1-6 1-4 1-3 1-2 1
3 1-9 1-5 1-4 1-3 1-2 1
NO. 20 4 1-8 1-4 1-3 1-3 1-2 1
5 1-6 1-3 1-3 1-2 1 1
6 1-3 1-2 1-2 1 1 1
7 1-2 1 1 1
1 2-12 2-7 1-6 1-3 1-2 1 1
2 1-10 1-6 1-5 1-3 1-2 1
3 1-8 1-5 1-4 1-3 1-2 1
NO. 18 4 1-6 1-3 1-3 1-2 1 1
5 1-3 1 1-2 1 1
6 1-2 1 1 1
1 1-11 1-9 1-6 1-4 1-2 1 1*
2 1-8 1-6 1-4 1-3 1 1
NO. 16 3 1-6 1-4 1-3 1-2 1
4 1-3 1 1 1
1 1-10 1-7 1-5 1-3 1-2 1
NO. 14 2 1-6 1-3 1-3 1 1
NO. 12 1 1-9 1-6 1-4 1-2 1 1*
NO. 10 1 1-3 1-2 1 1
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16
1 4-12 3-11 2-7 1-4
2 3-11 2-10 1-6 1-3
3 2-10 1-9 1-6 1-3
4 1-9 1-7 1-5 1-3
5 1-8 1-6 1-5 1-3
6 1-7 1-5 1-5 1-2
7 1-6 1-5 1-4 1-2
NO. 22 8 1-5 1-3 1-3 1-2
9 1-4 1-3 1-3 1-2
10 1-3 1-2 1-2 1
11 1-2
12 1
13
1 3-11 3-10 2-7 1-4
2 2-10 2-9 1-6 1-3
3 1-9 1-8 1-6 1-3
NO. 20 4 1-8 1-7 1-4 1-3
5 1-6 1-6 1-4 1-2
6 1-3 1-5 1-3 1-2
7 1-2 1-4 1-3 1
1 3-12 2-9 1-7 1-3
NO. 18 2 1-10 1-7 1-6 1-3
3 1-9 1-6 1-5 1-2
NO. 16 1 1-11 1-8 1-6 1-3
2 1-9 1-5 1-3 1-2
424 C
LISTED
105°C MAX.
LR 7189
CERTIFIED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field
applications, twist wires together before crimping. Minimum loading is five
No. 22 wires.
408-1003
CU
*Partially closing hand tools to “oval” splice permits
use of solid wires in these combinations.
424 C
LISTED
105°C MAX.
LR 7189
CERTIFIED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE EC
SOL. OR STR. WIRE COMB. CHART
(Solid or Stranded Wire)
Catalog No.328730,
53915-1,53915-4
Circular Mil Range 3,248 13,100
Use “18-10 EC” Tooling
Strip Length—10.72 mm [.422 in.] Min.—
11.51 mm [.453 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-16 STR.
600 Volt Max.Building Wiring
1000 Volt Max.Fixtures & Signs
CLOSED END SPLICE PRESSURE TYPE
SOL. OR STR. WIRE COMB. CHART
(Solid or Stranded Wire)
Catalog No.328730,
53915-1,53915-4
Circular Mil Range 3,248 13,100
Use “18-10 EC” Tooling
Strip Length—10.72 mm [.422 in.] Min.—
11.51 mm [.453 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-10
300 Volt Max.
105° C Max.
408-1003
CU
Closed End Splices
Nylon Wire Combination Charts, For Splices on Page 3 (Continued)
14
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 24 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14
1 1-10 1-6 1-4 1-2 1 1
2 1-9 1-5 1-4 1-2 1 1
3 1-8 1-5 1-3 1-2 1
NO. 24 4 1-7 1-4 1-3 1-2 1
5 1-6 1-4 1-2 1 1
6 1-5 1-3 1-2 1
7 1-4 1-2 1 1
1 1-9 1-6 1-3 1-2 1 1
2 1-7 1-5 1-3 1-2 1
NO. 22 3 1-6 1-4 1-2 1 1
4 1-4 1-3 1 1
5 1-3 1-2 1 1
1 1-7 1-4 1-3 1-2 1 1
NO. 20 2 1-6 1-3 1-2 1 1
3 1-3 1-2 1 1
1 1-7 1-5 1-3 1-2 1
NO. 18 2 1-4 1-2 1 1
NO. 16 1 1-4 1-3 1-2 1 1*
NO. 14 1 1-2 1 1
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16 NO. 14
1 1-5 1-3 1-2 1 1
2 1-4 1-3 1-2 1
NO. 22 3 1-3 1-2 1 1
4 1-2 1 1
5 1 1 1
1 1-5 1-3 1-2 1 1
NO. 20 2 1-4 1-2 1 1
3 1-3 1 1
1 1-4 1-3 1-2 1
NO. 18 2 1-2 1 1
NO. 16 1 1-3 1-2 1 1*
NO. 14 1 1 1
424 C
LISTED LR 7189
CERTIFIED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
INSTRUCTIONS: Use as shown
for OEM applications; otherwise,
for all field applications, twist wires
together before crimping.
408-1271
CU
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE ECN
SOL. OR STR. WIRE COMB. CHART
Catalog No.35115
Circular Mil Range 5095,180
Use “18-16 ECV— ECN or 22-14 ECV— ECN”
Tooling
Strip Length—8.33 mm [.328 in.] Min.—
9.13 mm [.359 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-14 SOL. OR STR.
300 Volt Max. 105°C MAX.
AMPAPPROVED WIRE COMBINATIONS
WIRE SIZE 24-14 SOL. OR STR.
*Partially closing hand tools to “oval”
splice permits use of solid wires in
these combinations.
NOTE: Two No. 18 solid wires must be twisted.
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10
1 4-16 3-9 2-7 1-4 1-2 1 1
2 3-15 2-8 1-6 1-4 1-2 1 1
3 2-14 1-6 1-5 1-3 1-2 1 1
4 1-13 1-5 1-4 1-3 1-2 1 1
5 1-12 1-4 1-3 1-3 1-2 1 1
6 1-11 1-4 1-3 1-2 1-2 1 1
7 1-10 1-3 1-3 1-2 1-2 1 1
NO. 22 8 1-9 1-3 1-3 1-2 1 1
9 1-8 1-3 1-2 1 1 1
10 1-7 1-2 1-2 1 1
11 1-6 1-2 1-2 1 1
12 1-5 1-2 1-2 1 1
13 1-4 1-2 1-2 1
14 1-3 1 1 1
15 1-2 1 1 1
16 1 1 1
1 3-16 3-7 2-4 1-4 1-2 1 1
2 2-13 2-6 1-4 1-3 1-2 1 1
3 1-9 1-5 1-4 1-2 1-2 1
NO. 20 4 1-6 1-4 1-2 1-2 1 1
5 1-4 1-3 1-2 1-2 1 1
6 1-3 1-2 1 1 1 1
7 1-2 1 1 1
1 2-16 2-7 1-6 1-4 1-2 1 1
2 1-9 1-4 1-5 1-2 1-2 1 1
3 1-8 1-4 1-4 1-2 1-2 1
NO. 18 4 1-4 1-2 1-3 1 1 1
5 1-3 1 1-2 1 1
6 1-2 1 1 1
1 1-15 1-6 1-5 1-4 1-2 1
2 1-8 1-3 1-3 1-3 1 1
NO. 16 3 1-5 1-3 1-2 1-2 1
4 1-2 1-2 1 1
1 1-12 1-5 1-5 1-3 1-2* 1
NO. 14 2 1-7 1-3 1-3 1 1*
NO. 12 1 1-9 1-6 1-4 1-2 1 1*
NO. 10 1 1-6 1-2 1 1
424 C
LISTED LR 7189
CERTIFIED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
*Partially closing hand tools to “oval”
splice permits use of solid wires in
these combinations.
INSTRUCTIONS: Use as shown
for OEM applications; otherwise,
for all field applications, twist wires
together before crimping. Mini-
mum loading is five No. 22 wires.
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE ECN
SOL. OR STR. WIRE COMB. CHART
Catalog No.35653
Circular Mil Range 3,248 13,100
Use “18-10 ECV— ECN or 16-10 C” Tooling
Strip Length—10.72 mm [.422 in.] Min.—
11.51 mm [.453 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-10 SOL. OR STR.
300 Volt Max. 105°C Max.
408-1021
CU
Closed End Splices
Specific Product Name_12 Hel. Con. Bold (Continued)_9pt Helvetica Lt Condensed
15
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
Nylon Wire Combination Charts, For Splices on Page 3 (Continued)
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12
1 4-13 3-9 2-6 1-4 1-2 1
2 3-12 2-8 2-5 1-3 1-2 1
3 2-11 1-7 1-5 1-3 1-2 1
4 1-10 1-6 1-4 1-3 1-2 1
5 1-9 1-6 1-4 1-3 1 1
NO. 22 6 1-8 1-5 1-4 1-2 1 1
7 1-7 1-5 1-3 1-2 1 1
8 1-6 1-4 1-2 1-2 1
9 1-5 1-3 1-2 1 1
10 1-4 1-3 1-2 1 1
11 1-3 1-2 1
1 4-11 3-9 2-6 1-4 1-2 1
2 2-9 2-8 1-5 1-3 1-2 1
NO. 20 3 1-8 1-7 1-4 1-2 1-2 1
4 1-7 1-6 1-4 1-2 1 1
1 3-10 2-8 1-6 1-3 1-2 1
2 1-9 1-7 1-5 1-3 1 1
NO. 18 3 1-8 1-5 1-4 1-2 1 1
4 1-7 1-4 1-3 1 1
1 1-9 1-7 1-5 1-3 1-2 1
2 1-6 1-5 1-3 1-2 1
NO. 16 3 1-5 1-3 1-2 1
1 1-10 1-7 1-4 1-2 1 1
NO. 14 2 1-4 1-3 1 1
NO. 12 1 1-6 1-4 1-3 1 1
424 C
LISTED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field
applications, twist wires together before crimping. Minimum loading is five
No. 22 wires.
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS—
STRANDED WIRE COMB. CHART
Catalog No.54316-1
Circular Mil Range 3,248 11,400
Use “18-10 EC” Tooling
Strip Length—10.72 mm [.422 in.] Min.—
11.51 mm [.453 in.] Max.
ULLISTED WIRE
COMBINATIONS
WIRE SIZE 22-12 STR.
300 Volt Max. 150°C Max.
408-2907
CU
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16 NO. 14
1 1-5 1-3 1-2 1 1
2 1-4 1-3 1-2 1
NO. 22 3 1-3 1-2 1 1
4 1-2 1 1
5 1 1 1
1 1-5 1-3 1-2 1 1
2 1-4 1-2 1 1
NO. 20 3 1-3 1 1
NO. 18 1 1-4 1-3 1-2 1
2 1-2 1 1
NO. 16 1 1-3 1-2 1 1*
NO. 14 1 1 1
NOTE: Two No.18 solid wires must be twisted.
424 C
LISTED LR 7189
CERTIFIED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE ECN
SOL. OR STR. WIRE COMB. CHART
Catalog No.55927-1
Circular Mil Range 5095,180
Use “18-10 ECV— ECN or 22-14 ECN” Tooling
Strip Length—8.33 mm [.328 in.] Min.—
9.13 mm [.359 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-10 SOL. OR STR.
300 Volt Max. 150°C Max.
408-8806
CU
INSTRUCTIONS: Use as shown
for OEM applications; otherwise,
for all field applications, twist wires
together before crimping.
*Partially closing hand tools to “oval”
splice permits use of solid wires in
these combinations.
AMPAPPROVED WIRE COMBINATIONS
WIRE SIZE 24-14 SOL. OR STR.
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 24 NO. 22 NO. 20 NO. 18 NO. 16 NO. 14
1 1-10 1-6 1-4 1-2 1 1
2 1-9 1-5 1-4 1-2 1 1
3 1-8 1-5 1-3 1-2 1
NO. 24 4 1-7 1-4 1-3 1-2 1
5 1-6 1-4 1-2 1 1
6 1-5 1-3 1-2 1
7 1-4 1-2 1 1
1 1-9 1-5 1-3 1-2 1 1
2 1-6 1-4 1-3 1-2 1
NO. 22 3 1-5 1-3 1-2 1 1
4 1-4 1-2 1 1
5 1-3 1 1 1
1 1-7 1-4 1-3 1-2 1 1
NO. 20 2 1-6 1-3 1-2 1 1
3 1-3 1-2 1 1
1 1-7 1-5 1-3 1-2 1
NO. 18 2 1-4 1-2 1 1
NO. 16 1 1-4 1-3 1-2 1 1*
NO. 14 1 1-2 1 1
Closed End Splices
Nylon Wire Combination Charts, For Splices on Page 3 (Continued)
16
Catalog 65472 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-04 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16
1 4-12 3-11 2-7 1-4
2 3-11 2-10 1-6 1-3
3 2-10 1-9 1-6 1-3
4 1-9 1-7 1-5 1-3
5 1-8 1-6 1-5 1-3
6 1-7 1-5 1-5 1-2
NO. 22 7 1-6 1-5 1-4 1-2
8 1-5 1-3 1-3 1-2
9 1-4 1-3 1-3 1-2
10 1-3 1-2 1-2 1
11 1-2
12 1
13
1 3-11 3-10 2-7 1-4
2 2-10 2-9 1-6 1-3
3 1-9 1-8 1-6 1-3
NO. 20 4 1-8 1-7 1-4 1-3
5 1-6 1-6 1-4 1-2
6 1-3 1-5 1-3 1-2
7 1-2 1-4 1-3 1
1 3-12 2-9 1-7 1-3
NO. 18 2 1-10 1-7 1-6 1-3
3 1-9 1-6 1-5 1-2
1 1-11 1-8 1-6 1-3
NO. 16 2 1-9 1-5 1-3 1-2
424 C
LISTED LR 7189
CERTIFIED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
INSTRUCTIONS: Use as shown for OEM applications; otherwise, for all field
applications, twist wires together before crimping. Minimum loading is five
No. 22 wires.
CU
CLOSED END SPLICE PRESSURE TYPE
WIRE CONNECTORS— TYPE EC
SOL. OR STR. WIRE COMB. CHART
Catalog No.55929-1
Circular Mil Range 3,24813,100
Use “18-10 EC” Tooling
Strip Length— 10.72 mm [.422 in.] Min.—
11.51 mm [.453 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-16 STR.
600 Volt Max.Building Wiring
1000 Volt Max.Fixture & Signs
150°C [302°F] Max.
408-8807
424 C
LISTED LR 7189
CERTIFIED
TO BE SOLD
ONLY WITH
INSTALLATION
INSTRUCTIONS
*Partially closing hand tools to “oval” splice permits use of solid wires in
these combinations.
CU
CLOSED END SPLICE PRESSURE TYPE
SOL. OR STR. WIRE COMB. CHART
Catalog No.55929-1
Circular Mil Range 3,24813,100
Use “18-10 EC” Tooling
Strip Length— 10.72 mm [.422 in.] Min.—
11.51 mm [.453 in.] Max.
ULLISTED AND CSACERTIFIED WIRE
COMBINATIONS
WIRE SIZE 22-10 STR.
300 Volt Max.
150°C [302°F] Max.
408-8807
WIRE NO. OF NO. OF ADDITIONAL WIRES OF ONE WIRE SIZE
SIZE WIRES NO. 22 NO. 20 NO. 18 NO. 16 NO. 14 NO. 12 NO. 10
1 4-14 3-8 2-7 1-4 1-2 1 1
2 3-13 2-7 1-6 1-3 1-2 1 1
3 2-12 1-6 1-5 1-3 1-2 1 1
4 1-11 1-5 1-4 1-3 1-2 1 1
5 1-10 1-5 1-4 1-3 1-2 1
6 1-9 1-5 1-4 1-2 1-2 1
NO. 22 7 1-8 1-4 1-3 1-2 1 1
8 1-7 1-4 1-3 1-2 1 1
9 1-6 1-3 1-2 1-2 1 1
10 1-5 1-3 1-2 1 1
11 1-4 1-2 1-2 1 1
12 1-3 1-2 1-2 1 1
13 1-2 1 1
14 1 1 1
15 1
1 3-11 2-7 2-6 1-4 1-2 1 1
2 2-10 1-6 1-4 1-3 1-2 1
3 1-9 1-5 1-4 1-3 1-2 1
NO. 20 4 1-8 1-4 1-3 1-3 1-2 1
5 1-6 1-3 1-3 1-2 1 1
6 1-3 1-2 1-2 1 1 1
7 1-2 1 1 1
1 2-12 2-7 1-6 1-3 1-2 1 1
2 1-10 1-6 1-5 1-3 1-2 1
3 1-8 1-5 1-4 1-3 1-2 1
NO. 18 4 1-6 1-3 1-3 1-2 1 1
5 1-3 1 1-2 1 1
6 1-2 1 1 1
1 1-11 1-9 1-6 1-4 1-2 1 1*
2 1-8 1-6 1-4 1-3 1 1
NO. 16 3 1-6 1-4 1-3 1-2 1
4 1-3 1 1 1
1 1-10 1-7 1-5 1-3 1-2 1
NO. 14 2 1-6 1-3 1-3 1 1
NO. 12 1 1-9 1-6 1-4 1-2 1 1*
NO. 10 1 1-3 1-2 1 1