STP120NF10 - STB120NF10 STW120NF10 N-channel 100V - 0.009 - 110A - TO-247 - TO-220 - DPAK STripFETTM II Power MOSFET General features Type VDSS RDS(on) ID STW120NF10 STP120NF10 STB120NF10 100V 100V 100V <0.0105 <0.0105 <0.0105 110A 110A 110A Exceptional dv/dt capability 100% avalanche tested Application oriented characterization 3 1 TO-247 DPAK 3 1 2 TO-220 Description This Power MOSFET series realized with STMicroelectronics unique STripFETTM process has specifically been designed to minimize the on-resistance. It is therefore suitable as primary switch in advanced high-efficiency,high-frequency isolated DC-DC converters for Telecom and Computer application. It is also intended for any applications with low gate drive requirements. Internal schematic diagram Applications Switching application Order codes Part number Marking Package Packaging STW120NF10 W120NF10 TO-247 Tube STP120NF10 P120NF10 TO-220 Tube STB120NF10 B120NF10 DPAK Tape & reel October 2006 Rev 6 1/15 www.st.com 15 Contents STW120NF10 - STP120NF10 - STB120NF10 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 ................................................ 8 STW120NF10 - STP120NF10 - STB120NF10 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit VDS Drain-source voltage (VGS = 0) 100 V VGS Gate-source voltage 20 V ID Drain current (continuous) at TC = 25C 110 A ID Drain current (continuous) at TC=100C 77 A Drain current (pulsed) 440 A Total dissipation at TC = 25C 312 W Derating factor 2.08 W/C IDM (1) PTOT dv/dt (2) Peak diode recovery voltage slope 10 V/ns EAS(3) Single pulse avalanche energy 550 mJ TJ Operating junction temperature Storage temperature -55 to 175 C 300 C Value Unit Tstg TL Maximum lead temperature for soldering purpose 1. Pulse width limited by safe operating area. 2. ISD < 120A, di/dt < 300A/s, VDD = 80%V(BR)DSS 3. Starting Tj = 25C, ID = 60A, VDD = 50V Table 2. Symbol Thermal resistance Parameter Rthj-case Thermal resistance junction-case max 0.48 C/W Rthj-amb Thermal resistance junction-ambient max 62.5 C/W 3/15 Electrical characteristics 2 STW120NF10 - STP120NF10 - STB120NF10 Electrical characteristics (TCASE=25C unless otherwise specified) Table 3. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown voltage Test conditions ID = 250A, VGS= 0 Zero gate voltage drain current (VGS = 0) IGSS Gate body leakage current (VDS = 0) VGS = 20V VGS(th) Gate threshold voltage VDS= VGS, ID = 250A RDS(on) Static drain-source on resistance VGS= 10V, ID= 60A Max. 100 Unit V 1 10 A A 100 nA 4 V 0.009 0.0105 Typ. Max. Unit VDS = Max rating@125C 2 Dynamic Symbol Parameter gfs (1) Forward transconductance VDS =25V, ID = 60A 90 S Input capacitance Output capacitance Reverse transfer capacitance VDS =25V, f=1 MHz, VGS=0 5200 785 325 pF pF pF Total gate charge Gate-source charge Gate-drain charge VGS =10V Ciss Coss Crss Qg Qgs Qgd Test conditions VDD=80V, ID = 120A (see Figure 13) 1. Pulsed: pulse duration=300s, duty cycle 1.5% 4/15 Typ. VDS = Max rating, IDSS Table 4. Min. Min. 172 32 64 233 nC nC nC STW120NF10 - STP120NF10 - STB120NF10 Table 5. Symbol td(on) tr td(off) tf Table 6. Symbol Electrical characteristics Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions Min. Typ. Max. 25 90 132 68 VDD=50V, ID= 60A, RG=4.7, VGS=10V (see Figure 12) Unit ns ns ns ns Source drain diode Max Unit Source-drain current 110 A ISDM(1) Source-drain current (pulsed) 440 A VSD(2) Forward on voltage 1.3 V ISD trr Qrr IRRM Parameter Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions Min Typ. ISD=120A, VGS=0 ISD=120A, di/dt = 100A/s, VDD=40V, Tj=150C (see Figure 17) 152 760 10 ns nC A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300s, duty cycle 1.5% 5/15 Electrical characteristics STW120NF10 - STP120NF10 - STB120NF10 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Normalized BVDSS vs temperature Figure 6. Static drain-source on resistance 6/15 STW120NF10 - STP120NF10 - STB120NF10 Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 11. Source-drain diode forward characteristics 7/15 Test circuit 3 STW120NF10 - STP120NF10 - STB120NF10 Test circuit Figure 12. Switching times test circuit for resistive load Figure 13. Gate charge test circuit Figure 14. Test circuit for inductive load Figure 15. Unclamped inductive load test switching and diode recovery times circuit Figure 16. Unclamped inductive waveform 8/15 Figure 17. Switching time waveform STW120NF10 - STP120NF10 - STB120NF10 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/15 Package mechanical data STW120NF10 - STP120NF10 - STB120NF10 TO-247 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.85 5.15 0.19 0.20 A1 2.20 2.60 0.086 0.102 b 1.0 1.40 0.039 0.055 b1 2.0 2.40 0.079 0.094 0.134 b2 3.0 3.40 0.118 c 0.40 0.80 0.015 0.03 D 19.85 20.15 0.781 0.793 E 15.45 15.75 0.608 e 5.45 0.620 0.214 L 14.20 14.80 0.560 L1 3.70 4.30 0.14 L2 18.50 0.582 0.17 0.728 oP 3.55 3.65 0.140 0.143 oR 4.50 5.50 0.177 0.216 S 10/15 TYP 5.50 0.216 STW120NF10 - STP120NF10 - STB120NF10 Package mechanical data TO-220 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 0.154 0.645 28.90 1.137 oP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 11/15 Package mechanical data STW120NF10 - STP120NF10 - STB120NF10 D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 10.4 0.393 D1 E 8 10 E1 0.315 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 R 0 0.126 0.015 4 3 V2 0.4 1 12/15 STW120NF10 - STP120NF10 - STB120NF10 5 Packaging mechanical data Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 13/15 Revision history 6 STW120NF10 - STP120NF10 - STB120NF10 Revision history Table 7. 14/15 Revision history Date Revision Changes 20-Mar-2006 2 Preliminary datasheet 31-Mar-2006 3 Typing error 19-Jun-2006 4 New template, no content change 28-Jun-2006 5 New ID value on Table 1 05-Oct-2006 6 New value on Table 6 STW120NF10 - STP120NF10 - STB120NF10 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 15/15