October 2006 Rev 6 1/15
15
STP120NF10 - STB120NF10
STW120NF10
N-channel 100V - 0.009Ω - 110A - TO-247 - TO-220 - D²PAK
STripFET™ II Power MOSFET
General features
■Exceptional dv/dt capability
■100% avalanche tested
■Application oriented characterization
Description
This Power MOSFET series realized with
STMicroelectronics unique STripFET™ process
has specifically been designed to minimize the
on-resistance. It is therefore suitable as primary
switch in advanced high-efficiency,high-frequency
isolated DC-DC converters for Telecom and
Computer application. It is also intended for any
applications with low gate drive requirements.
Applications
■Switching application
Internal schematic diagram
Type VDSS RDS(on) ID
STW120NF10
STP120NF10
STB120NF10
100V
100V
100V
<0.0105Ω
<0.0105Ω
<0.0105Ω
110A
110A
110A
TO-247
1
3
123
TO-220
D²PAK
www.st.com
Order codes
Part number Marking Package Packaging
STW120NF10 W120NF10 TO-247 Tube
STP120NF10 P120NF10 TO-220 Tube
STB120NF10 B120NF10 D²PAK Tape & reel
Contents STW120NF10 - STP120NF10 - STB120NF10
2/15
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
STW120NF10 - STP120NF10 - STB120NF10 Electrical ratings
3/15
1 Electrical ratings
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
VDS Drain-source voltage (VGS = 0) 100 V
VGS Gate-source voltage ± 20 V
IDDrain current (continuous) at TC = 25°C 110 A
ID Drain current (continuous) at TC=100°C 77 A
IDM (1)
1. Pulse width limited by safe operating area.
Drain current (pulsed) 440 A
PTOT Total dissipation at TC = 25°C 312 W
Derating factor 2.08 W/°C
dv/dt (2)
2. ISD < 120A, di/dt < 300A/µs, VDD = 80%V(BR)DSS
Peak diode recovery voltage slope 10 V/ns
EAS(3)
3. Starting Tj = 25°C, ID = 60A, VDD = 50V
Single pulse avalanche energy 550 mJ
TJ
Tstg
Operating junction temperature
Storage temperature -55 to 175 °C
TLMaximum lead temperature for soldering purpose 300 °C
Table 2. Thermal resistance
Symbol Parameter Value Unit
Rthj-case Thermal resistance junction-case max 0.48 °C/W
Rthj-amb Thermal resistance junction-ambient max 62.5 °C/W
Electrical characteristics STW120NF10 - STP120NF10 - STB120NF10
4/15
2 Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 3. On/off states
Symbol Parameter Test conditions Min. Typ. Max. Unit
V(BR)DSS Drain-source breakdown
voltage ID = 250µA, VGS= 0 100 V
IDSS
Zero gate voltage drain
current (VGS = 0)
VDS = Max rating,
VDS = Max rating@125°C
1
10
µA
µA
IGSS
Gate body leakage current
(VDS = 0) VGS = ±20V ±100 nA
VGS(th) Gate threshold voltage VDS= VGS, ID = 250µA 24V
RDS(on) Static drain-source on
resistance VGS= 10V, ID= 60A 0.009 0.0105 Ω
Table 4. Dynamic
Symbol Parameter Test conditions Min. Typ. Max. Unit
gfs (1)
1. Pulsed: pulse duration=300µs, duty cycle 1.5%
Forward transconductance VDS =25V, ID = 60A 90 S
Ciss
Coss
Crss
Input capacitance
Output capacitance
Reverse transfer
capacitance
VDS =25V, f=1 MHz,
VGS=0
5200
785
325
pF
pF
pF
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD=80V, ID = 120A
VGS =10V
(see Figure 13)
172
32
64
233 nC
nC
nC
STW120NF10 - STP120NF10 - STB120NF10 Electrical characteristics
5/15
Table 5. Switching times
Symbol Parameter Test conditions Min. Typ. Max. Unit
td(on)
tr
td(off)
tf
Turn-on delay time
Rise time
Turn-off delay time
Fall time
VDD=50V, ID= 60A,
RG=4.7Ω, VGS=10V
(see Figure 12)
25
90
132
68
ns
ns
ns
ns
Table 6. Source drain diode
Symbol Parameter Test conditions Min Typ. Max Unit
ISD Source-drain current 110 A
ISDM(1)
1. Pulse width limited by safe operating area
Source-drain current (pulsed) 440 A
VSD(2)
2. Pulsed: pulse duration=300µs, duty cycle 1.5%
Forward on voltage ISD=120A, VGS=0 1.3 V
trr
Qrr
IRRM
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD=120A,
di/dt = 100A/µs,
VDD=40V, Tj=150°C
(see Figure 17)
152
760
10
ns
nC
A
Electrical characteristics STW120NF10 - STP120NF10 - STB120NF10
6/15
2.1 Electrical characteristics (curves)
Figure 1. Safe operating area Figure 2. Thermal impedance
Figure 3. Output characterisics Figure 4. Transfer characteristics
Figure 5. Normalized BVDSS vs temperature Figure 6. Static drain-source on resistance
STW120NF10 - STP120NF10 - STB120NF10 Electrical characteristics
7/15
Figure 7. Gate charge vs gate-source voltage Figure 8. Capacitance variations
Figure 9. Normalized gate threshold voltage
vs temperature
Figure 10. Normalized on resistance vs
temperature
Figure 11. Source-drain diode forward
characteristics
Test circuit STW120NF10 - STP120NF10 - STB120NF10
8/15
3 Test circuit
Figure 12. Switching times test circuit for
resistive load
Figure 13. Gate charge test circuit
Figure 14. Test circuit for inductive load
switching and diode recovery times
Figure 15. Unclamped inductive load test
circuit
Figure 16. Unclamped inductive waveform Figure 17. Switching time waveform
STW120NF10 - STP120NF10 - STB120NF10 Package mechanical data
9/15
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
Package mechanical data STW120NF10 - STP120NF10 - STB120NF10
10/15
DIM.
mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.85 5.15 0.19 0.20
A1 2.20 2.60 0.086 0.102
b 1.0 1.40 0.039 0.055
b1 2.0 2.40 0.079 0.094
b2 3.0 3.40 0.118 0.134
c 0.40 0.80 0.015 0.03
D 19.85 20.15 0.781 0.793
E 15.45 15.75 0.608 0.620
e5.45 0.214
L 14.20 14.80 0.560 0.582
L1 3.70 4.30 0.14 0.17
L2 18.50 0.728
øP 3.55 3.65 0.140 0.143
øR 4.50 5.50 0.177 0.216
S5.50 0.216
TO-247 MECHANICAL DATA
STW120NF10 - STP120NF10 - STB120NF10 Package mechanical data
11/15
DIM.
mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.40 4.60 0.173 0.181
b 0.61 0.88 0.024 0.034
b1 1.15 1.70 0.045 0.066
c 0.49 0.70 0.019 0.027
D 15.25 15.75 0.60 0.620
E 10 10.40 0.393 0.409
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.194 0.202
F 1.23 1.32 0.048 0.052
H1 6.20 6.60 0.244 0.256
J1 2.40 2.72 0.094 0.107
L 13 14 0.511 0.551
L1 3.50 3.93 0.137 0.154
L20 16.40 0.645
L30 28.90 1.137
øP 3.75 3.85 0.147 0.151
Q 2.65 2.95 0.104 0.116
TO-220 MECHANICAL DATA
Package mechanical data STW120NF10 - STP120NF10 - STB120NF10
12/15
TO-247 MECHANICAL DATA
1
DIM.
mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.4 4.6 0.173 0.181
A1 2.49 2.69 0.098 0.106
A2 0.03 0.23 0.001 0.009
B 0.7 0.93 0.027 0.036
B2 1.14 1.7 0.044 0.067
C 0.45 0.6 0.017 0.023
C2 1.23 1.36 0.048 0.053
D 8.95 9.35 0.352 0.368
D1 8 0.315
E 10 10.4 0.393
E1 8.5 0.334
G 4.88 5.28 0.192 0.208
L 15 15.85 0.590 0.625
L2 1.27 1.4 0.050 0.055
L3 1.4 1.75 0.055 0.068
M 2.4 3.2 0.094 0.126
R0.4 0.015
V2 0º 4º
D2PAK MECHANICAL DATA
3
STW120NF10 - STP120NF10 - STB120NF10 Packaging mechanical data
13/15
5 Packaging mechanical data
TAPE AND REEL SHIPMENT
D2PAK FOOTPRINT
* on sales type
DIM. mm inch
MIN. MAX. MIN. MAX.
A 330 12.992
B1.5 0.059
C 12.8 13.2 0.504 0.520
D20.2 0795
G 24.4 26.4 0.960 1.039
N100 3.937
T 30.4 1.197
BASE QTY BULK QTY
1000 1000
REEL MECHANICAL DATA
DIM. mm inch
MIN. MAX. MIN. MAX.
A0 10.5 10.7 0.413 0.421
B0 15.7 15.9 0.618 0.626
D 1.5 1.6 0.059 0.063
D1 1.59 1.61 0.062 0.063
E 1.65 1.85 0.065 0.073
F11.4 11.6 0.449 0.456
K0 4.8 5.0 0.189 0.197
P0 3.9 4.1 0.153 0.161
P1 11.9 12.1 0.468 0.476
P2 1.9 2.1 0.075 0.082
R 50 1.574
T 0.25 0.35 0.0098 0.0137
W23.7 24.3 0.933 0.956
TAPE MECHANICAL DATA
STW120NF10 - STP120NF10 - STB120NF10
15/15
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
