Silicon Bridge Rectifiers COMCHIP www.comchiptech.com MP1000 Thru 1010 Reverse Voltage: 50 - 1000 Volts Forward Current: 10 Amp Features - Diffused Junction - High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has Underwriters Laboratory Flammability Classification 94V-O MP-10 H J + G ~ A E ~ Mechanical Data - E - Case: Molded Plastic - Terminals: Plated Leads Solderable per MIL STD-202, Method 208 - Weight: 5.4 grams (approx.) - Mounting Position: Through Hole for #6 Screw - Mounting Torque: 5.0 Inch-pounds Maximum D C B MP-10 Min Max 14.73 15.75 5.80 6.90 19.00 1.00 O Typical 5.11 6.14 Hole for # 6 screw G 3.60 4.00 H 10.30 11.30 J 2.38 x 45oC Typical All Dimensions in mm Dim A B C D E Metal Heat Sink Maximum Ratings and Electrical Characterics Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. CHARACTERISTICS Symbol Peak Repetitive Reverse Voltage VRRM Working Peak Rever se Voltage VRWM DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note1) @ T A = 50C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage (per element) @I F = 5.0A Peak Reverse Current @T C = 25C At Rated DC Blocking Voltage @T C = 100C I2t Rating for Fusing (t < 8.3ms) (Note2) Typical Junction Capacitance (Note3) Typical Thermal Resistance (Note4) Operating and Storage Temperature Range MP MP MP MP MP MP MP UNIT 1000 1001 1002 1004 1006 1008 1010 50 100 200 400 600 800 1000 V 35 70 140 280 10 420 560 700 V A VR VR(RMS) IO IFSM 200 A VFM 1.1 10 1.0 64 V uA mA A2s pF IR I2t Cj R JC Tj, TSTG 110 7.5 K/W -65 to +150 C Note: 1. Non-repetitive for t > 1ms and < 8.3ms. 2. Thermal resistance junction to am bient mounted on PC board with 13.0 x 13.0 x 0.03mm thick land areas. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 4. Thermal resistance junction to cas e per element. MDS0309003A Page 1 Silicon Bridge Rectifiers COMCHIP www.comchiptech.com Rating and Characteristic Curves (MP1000 thru 1010) 10 Resistive or Inductive load 8 I F , Forward current ( A ) I AV, Average forward OUTPUT current ( A ) 10 6 4 1.0 0.1 Tj = 25 o C Pulse width = 300uS 2 0 0.01 25 50 75 100 125 0 T A , Ambient Temperature ( o C) 0.8 1.2 1.6 V F , Instantaneous Forward Voltage (V) 240 10 Tc = 50 o C Single half sine-wave JEDEC method 200 I R, Instantaneous Reverse Current ( A ) I F, Peak Forward Surge Current ( A ) 0.4 160 120 80 40 Tj =100o C 1.0 0.1 Tj =25o C 0 1.0 10 Number of Cycles at 60Hz MDS0309003A 100 0.01 0 40 80 120 Percent of Rated Peak Reverse Voltage (%) Page 2