Drop-In Monolithic Amplifier DC-4 GHz Product Features * DC-4 GHz * Single voltage supply * Internally matched to 50 ohms * Unconditionally stable * Low performance variation over temperature * Transient protected * Aqueous washable * Protected By US Patent 6,943,629 ERA-6+ CASE STYLE: VV105 PRICE: $3.85 ea. QTY. (30) Typical Applications +RoHS Compliant * Cellular/ PCS/ 3G Base Station * CATV, Cable Modem & DBS * Fixed Wireless & WLAN * Microwave Radio & Test Equipment The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications General Description ERA-6+ (RoHS compliant) is a wideband amplifier offering high dynamic range. It has repeatable performance from lot to lot. It is enclosed in a Micro-X package. ERA-6+ uses Darlington configuration and is fabricated using InGaP HBT technology. Expected MTBF is 420 years at 85C case temperature. simplified schematic and pin description RF-OUT and DC-IN RF-OUT and DC-IN 3 RF IN GND 4 GND 2 1 RF IN GROUND Function Pin Number Description RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in "Recommended Application Circuit". GND 2,4 Connections to ground. Use via holes as shown in "Suggested Layout for PCB Design" to reduce ground path inductance for best performance. Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine IF/RF MICROWAVE COMPONENTS For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com REV. M M117811 Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications ERA-6+ and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to 110617 Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Page 1 of 4 Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. ERA-6+ Monolithic InGaP HBT MMIC Amplifier Electrical Specifications at 25C and 70mA, unless noted Parameter Min. Frequency Range* Typ. DC f=0.1 GHz f=1 GHz f=2 GHz f=3 GHz f=4 GHz f=0.1 GHz f=1 GHz f=2 GHz f=3 GHz f=4 GHz f=0.1 GHz f=1 GHz f=2 GHz f=3 GHz f=4 GHz f=0.1 GHz f=1 GHz f=2 GHz f=3 GHz f=4 GHz Gain Magnitude of Gain Variation versus Temperature (values are negative) Input Return Loss Output Return Loss Reverse Isolation f=2 GHz f=0.1 GHz f=1 GHz f=2 GHz f=3 GHz Output Power @ 1 dB compression f=4 GHz f=0.1 GHz f=1 GHz f=2 GHz f=3 GHz f=4 GHz f=0.1 GHz f=1 GHz f=2 GHz f=3 GHz f=4 GHz f=0.1 GHz f=1 GHz f=2 GHz f=3 GHz f=4 GHz Saturated Output Power (at 3dB compression) Output IP3 Noise Figure Group Delay Recommended Device Operating Current Device Operating Voltage Device Voltage Variation vs. Temperature at 70mA Device Voltage Variation vs. Current at 25C Thermal Resistance, junction-to-case1 12 12.6 12.5 11.7 11.7 10.3 0.0013 0.0018 0.0021 0.0025 0.0032 25 30 35 33 28 35 24 20 20 20 11.1 9.8 16 16 f=2 GHz Units 4 GHz 13.3 dB 10.8 .0025 .0035 .004 .005 .007 1.5 dB/C dB dB 19 dB dBm 1.33 dBm dBm 5.2 5.5 5.5 6 6 80 1.33 dB psec 70 4.7 Cpk 12.3 17.1 17.2 17.1 16.2 14.7 17.1 17.2 17.7 17.3 15.9 36.5 35 33 30 28.5 4.4 4.4 4.5 4.5 4.7 34 33 31 Max. mA 5 5.3 V -3.2 mV/C 11.8 mV/mA 138 C/W 1.5 *Guaranteed specification DC-4 GHz. Low frequency cut off determined by external coupling capacitors. Absolute Maximum Ratings Parameter Ratings Operating Temperature* -45C to 85C Storage Temperature -65C to 150C Operating Current 85mA Power Dissipation 451mW Input Power 20dBm Note: Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation. 1 Case is defined as ground leads. *Based on typical case temperature rise 5C above ambient. Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. Page 2 of 4 ERA-6+ Monolithic InGaP HBT MMIC Amplifier Product Marking 3 4 6 2 index over pin 1 1 Markings in addition to model number designation may appear for internal quality control purposes. Additional Detailed Technical Information Additional information is available on our web site. To access this information enter the model number on our web site home page. Performance data, graphs, s-parameter data set (.zip file) Case Style: VV105 Plastic micro-x, .085 body diameter, lead finish: tin/silver/nickel Tape & Reel: F20 Suggested Layout for PCB Design: PL-261 Evaluation Board: TB-431-6+ Environmental Ratings: ENV08T2 Recommended Application Circuit R BIAS Vcc "1%" Res. Values (ohms) for Optimum Biasing 7 8 9 10 11 12 13 14 15 16 17 18 19 20 30.1 43.2 56.2 69.8 84.5 100 113 127 140 154 169 182 196 210 4 Test Board includes case, connectors, and components (in bold) soldered to PCB Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. Page 3 of 4 ERA-6+ Monolithic InGaP HBT MMIC Amplifier ESD Rating Human Body Model (HBM): Class 1B (500 v to < 1,000 v) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M1 ( < 100 v) in accordance with ANSI/ESD STM 5.2 - 1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020C No. Test Required Condition Standard Quantity 1 Visual Inspection Low Power Microscope Magnification 40x MIP-IN-0003 (MCT spec) 45 units 2 Electrical Test Room Temperature SCD (MCL spec) 45 units 3 SAM Analysis Less than 10% growth in term of delamination J-Std-020C (Jedec Standard) 45 units 4 Moisture Sensitivity Level 1 Bake at 125C for 24 hours Soak at 85C/85%RH for 168 hours Reflow 3 cycles at 260C peak J-Std-020C (Jedec Standard) 45 units MSL Test Flow Chart Start Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260C Soak 85C/85RH 168 hours Bake at 125C, 24 hours Visual Inspection Electrical Test SAM Analysis Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. Page 4 of 4