Click on Series name for product info on aimtec.com Series AM1PS-Z 1 Watt | DC-DC Converter FEATURES: * * * * * * * * RoHS Compliant 8 Pin Dip Package Low Ripple And Noise High Efficiency Up To 78% Operating Temperature -40oCto +85oC Input / Output Isolation 1000 &3000 VDC Pin Compatible With Multiple Manufacturers Continuous Short Circuit Protection Models Single output Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) AM1PS-0505SZ AM1PS-0512SZ AM1PS-0515SZ AM1PS-1205SZ AM1PS-1212SZ AM1PS-1215SZ AM1PS-2405SZ AM1PS-2412SZ AM1PS-2415SZ 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 5 12 15 5 12 15 5 12 15 200 83.3 66.6 200 83.3 66.6 200 83.3 66.6 1000 1000 1000 1000 1000 1000 1000 1000 1000 267 270 173 110 111 111 58 56 56 AM1PS-0505SH30Z AM1PS-0512SH30Z AM1PS-0515SH30Z AM1PS-1205SH30Z AM1PS-1212SH30Z AM1PS-1215SH30Z AM1PS-2405SH30Z AM1PS-2412SH30Z AM1PS-2415SH30Z 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 5 12 15 5 12 15 5 12 15 200 83.3 66.6 200 83.3 66.6 200 83.3 66.6 3000 3000 3000 3000 3000 3000 3000 3000 3000 267 270 173 110 111 111 58 56 56 Output Current Max (mA) Isolation (VDC) 100 50 33 100 41.66 33 100 41.66 33 1000 1000 1000 1000 1000 1000 1000 1000 1000 Model Input Current Full Load | No Load (mA) Max Capacitive Load (F) Efficiency (%) 53 48 50 20 20 30 20 15 15 100 100 100 100 100 100 100 100 100 75 75 73 76 75 75 72 75 75 53 48 50 20 20 30 20 15 15 100 100 100 100 100 100 100 100 100 75 74 73 76 75 75 72 75 75 Models Dual output Model AM1PS-0505DZ AM1PS-0512DZ AM1PS-0515DZ AM1PS-1205DZ AM1PS-1212DZ AM1PS-1215DZ AM1PS-2405DZ AM1PS-2412DZ AM1PS-2415DZ Input Voltage (V) 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 Output Voltage (V) 5 12 15 5 12 15 5 12 15 Input Current Full Load | No Load (mA) 267 270 173 110 111 111 58 56 56 53 48 50 20 20 30 20 15 15 Max Capacitive Load (F) 47 47 47 47 47 47 47 47 47 Efficiency (%) 70 73 77 71 71 71 74 75 74 AM1PS-0505DH30Z 4.5-5.5 5 100 3000 267 53 47 70 AM1PS-0512DH30Z 4.5-5.5 12 50 3000 270 48 47 73 AM1PS-0515DH30Z 4.5-5.5 15 33 3000 173 50 47 77 AM1PS-1205DH30Z 10.8-13.2 5 100 3000 110 20 47 71 AM1PS-1212DH30Z 10.8-13.2 12 41.66 3000 111 20 47 71 AM1PS-1215DH30Z 10.8-13.2 15 33 3000 111 30 47 71 AM1PS-2405DH30Z 21.6-26.4 5 100 3000 58 20 47 74 AM1PS-2412DH30Z 21.6-26.4 12 41.66 3000 56 15 47 75 AM1PS-2415DH30Z 21.6-26.4 15 33 3000 56 15 47 74 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified www.aimtec.com F 051e R12.E Tel: +1 514 620 2722 1 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1PS-Z 1 Watt | DC-DC Converter Input Specifications Parameters Nominal Typical 5 12 24 Voltage range 4.5-5.5 10.8-13.2 21.6-26.4 Capacitor Filter Turn on Transient process time Start up time Absolute Maximum Rating Peak Input Voltage time Input Reflected Ripple current Maximum VDC 25 200 0-7 0-15 0-28 100 20 5 Vin 12 Vin 24 Vin With 12H Units ms ms VDC ms mA p-p Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60sec Rated Units 1000 and3000 VDC MOhm pF > 1000 10 Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise Rising time Conditions Typical For 1% change of Vin Load 20 - 100% At 20MHz Bandwidth Maximum 3 Continuous Auto-Recovery 1.2 10 0.02 100 50 Units % % % %/oC mV p-p ms General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load Full Load without Derating 80 Maximum Units 100 KHz oC oC oC -40 to+85 -40 to +125 Free air convection 95 Non-conductive black plastic 1.8 0.50 x 0.40 x 0.27 inches 12.70 x 10.16 x 6.85 mm >1 121 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) % g Safety Specifications Parameters Standards www.aimtec.com F 051e R12.E NOTE: Designed to meet IEC 60950-1 Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1PS-Z 1 Watt | DC-DC Converter Pin Out Specifications Pin 1000 and 3000 VDC Single Dual 1 4 5 6 7 8 - V Input + V Input + V Output No pin - V Output No pin - V Input + V Input + V Output No pin Common - V Output Dimensions 0.50 (0.02) 12.70 (0.50) 7.62 (0.30) 4 1 7.62 (0.30) 10.16 (0.40) Bottom View 8 7 6 5 2.54 (0.10) 6.85 (0.27) 3.05 (0.12) 0.50 (0.02) 2.54 (0.10) Typical Efficiency Example Charts Eff % AM1PS-0505SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % www.aimtec.com F 051e R12.E Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1PS-Z 1 Watt | DC-DC Converter Eff % AM1PS-1205SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % Eff % AM1PS-2405SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.E Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only