M A G N E T I C S H E E T June 2017 Noise suppression sheets Flexield IFL series Hybrid type (magnetic layer+conductive layer) (2/7) MAGNETIC SHEET REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS When ounting on ive electrical part directly, there is a fear that an insulation accident is caused, so please consider on the design in case of use. There is a fear that sullenness of double sided adhesive tape occurs, so please refrain from the use to a part where you wind repeatedly by which it's for the hinge part. The products listed on this catalog are intended for use in automotive electronic equipment under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. When the damage occurs by having been used the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please understand that the responsibility cannot be taken. (1) Aerospace/Aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for automotive-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 20170620 / emc_noise-sheet_ifl_hybrid_en.fm (3/7) MAGNETIC SHEET Noise suppression sheets Product compatible with RoHS directive Halogen-free Flexield Overview of IFL series Hybrid type (magnetic layer+conductive layer) FEATURES In addition to the magnetic loss effect by a magnetic layer, the noise control effect by a conduction layer is demonstrated. As the sheet surface, it is lineup about two kinds, conductivity and insulation. Has flexibility , it does not crack by impact or the like . It excels in shape processability and can respond to various dimensions and shapes. Offer by a roll shape is possible. APPLICATION Electromagnetic noise measures of various kinds of electronic equipment Receiver sensitivity improvement of PEN input (inductive coupling type) Performance improvement of RFID (on metal correspondence) STANDARD PART NUMBER LIST Magnetic sheet material IFL16 Magnetic sheet thickness (mm) 0.03 Sheet dimensions (mm) 300x200 RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170620 / emc_noise-sheet_ifl_hybrid_en.fm (4/7) MAGNETIC SHEET IFL series Hybrid type (magnetic layer+conductive layer) PART NUMBER CONSTRUCTION IFL Series name 16 Material symbol 16 - 030 E B 300 Magnetic sheet thickness (mm) Surface state of the surface film Double-sided tape thickness (mm) Length (mm) 030 0.03 E G The surface of the insulating layer The surface of the conductive layer N No B 0.01 300 Insulating layer 0.015mm x 200 Width (mm) 300 200 200 Conductive layer 0.03mm Surface film Surface film Conductive layer 0.03mm Insulating layer 0.015mm Magnetic sheet Double-sided Magnetic sheet Double-sided Length Length Width Width STANDARD PART NUMBER LIST Material Standard dimensionss (mm) Magnetic sheet thickness (mm) IFL16 300x200 0.03 Surface state of the surface film Part number Magnetic layer Insulating layer IFL16-030EB300X200 IFL16-030GB300X200 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170620 / emc_noise-sheet_ifl_hybrid_en.fm (5/7) MAGNETIC SHEET IFL series Hybrid type (magnetic layer+conductive layer) MATERIAL CHARACTERISTIC MATERIAL CHARACTERISTIC SPECIFICATION TABLE Material name Recommended frequency range Relative permeability (at 1MHz) Surface resistivity ( /sq.)min Thermal conductivity (W/m * K) IFL16 0.5 MHz to 10 GHz 220 10k 1.5 Material Operating temperature range C -40 to +85 property is value of magnetic layer. RELATIVE PERMEABILITY 250 IFL16 ' Relative permeability 200 150 100 IFL16 '' 50 0 1 10 100 Frequency (MHz) 1000 10000 1 10 Frequency (MHz) 100 1000 SHIELD EFFECT 0 -10 Shielding Effect (dB) -20 -30 -40 -50 -60 -70 -80 0.1 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170620 / emc_noise-sheet_ifl_hybrid_en.fm (6/7) MAGNETIC SHEET IFL series Hybrid type (magnetic layer+conductive layer) MATERIAL CHARACTERISTIC NEIGHBORHOOD MAGNETIC FIELD ATTENUATION Attenuation (dB) 20 15 10 5 0 10 100 Frequency (MHz) 1000 NEIGHBORHOOD MAGNETIC FIELD ATTENUATION TESTING METHOD (Magnetic field measurement on the microstrip line) Network analyzer Magnetic field probe 50 terminal Flexield Micro Strip Line 50 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170620 / emc_noise-sheet_ifl_hybrid_en.fm (7/7) MAGNETIC SHEET IFL series Hybrid type (magnetic layer+conductive layer) MATERIAL CHARACTERISTIC TRANSMISSION ATTENUATION 7 Attenuation (dB) 6 5 4 3 2 1 0 10 100 1000 Frequency (MHz) 10000 TRANSMISSION ATTENUATION TESTING METHOD (Transmission measurement in a coaxial track) Network analyzer Coaxial line Flexield Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170620 / emc_noise-sheet_ifl_hybrid_en.fm