Occupancy Controller The 5752PP and 752PP Series Occupancy Controllers have two lighting control relays, an occupancy sensor power supply, two auxiliary input switches, two timers (one per relay), and two relay default mode switches associated with each relay. The 5752PP Occupancy Controller includes a C-Bus interface allowing for seamless integration into any C-Bus network. The 752PP Occupancy Controller is ideal for non-networked applications and comes factory programmed with selectable auto or manual On settings for each relay. The Occupancy Controller provides a simple all-in-one solution for dimming, on-off operation, and powering of sensors. It operates over a wide range of input voltages (100 - 277 VAC) and is designed for above-ceiling installation. The Occupancy Controller is ideal for in-room occupancy control applications such as classrooms, open-office space, executive offices and conference rooms. > Features * Input voltage range: 100 - 277 VAC 50/60 Hz * One occupancy sensor input terminal for each relay * 24 VDC power supply for the occupancy sensor * One auxiliary input switch terminal and timer for each relay * One relay fail-safe mode switch for each relay * Remote override on/off capability * Class 1 and Class 2 voltage isolation * C-Bus connectivity option 5752PP and 752PP Series Occupancy Controllers Visit www.schneider-electric.us Make the most of your energy SM Occupancy Controller Compatible Occupancy Sensors Sensor Description SLSCPS1000 Ceiling mount PIR motion sensor, 360detection pattern, isolated relay SLSCUS2000 > Specifications Power supply voltage 100-277VAC Power supply frequency 50 - 60 Hz Ceiling mount Ultrasonic motion sensor, 360detection pattern, isolated relay Motion sensor power supply Power output 280 mA (140 mA per detector connection) SLSCDS2000 Ceiling mount Dual-technology (PIR and Ultrasonic) motion sensor, 360 detection pattern, isolated relay Power supply rating 24 VDC SELV/Class 2 SLSCDU800 Ceiling mount Ultrasonic motion sensor, 180 detection pattern, isolated relay Nominal C-Bus Voltage Requirements (if connected to CBus network) Draws 15-36 VDC SELV / Class 2 @ 25 mA from the C-Bus network, enabling configuration. SLSCDS800 Ceiling mount Dual-technology (PIR and Ultrasonic motion sensor, 180 detection pattern, isolated relay Max units per network 80 C-Bus AC Impedance 80 K @ 1 KHz Relay rating Resistive: 16A at 277 VAC Incandescent/Tungsten: 12A at 277 VAC Fluorescent (UL) Standard ballast: 10 A at 277 VAC (inductive 0.4 - 0.5 pf) Ballast control power supply Analog: 1 - 10 VDC 200 mA (5752PP/2R/2D) DSI: 0 - 12 VDC 200 mA DALI: 0 - 12 VDC 250 mA Maximum ballasts per control (57PP/2R/2D) 100 for DALI or DSI. 50 for 0-10 V analog Connections (Screw-type Phoenixstyle connectors) nput: 14 - 12 AWG (2.5 - 4 mm ) Relay output: 14 - 12 AWG (2.5 - 4 mm ) Motion detector: 3-pin, 1 per relay present Auxiliary input: 2-pin, 1 per relay present C-Bus: 4-pin Maximum operating temp. 122F (50 C) approved for use in a plenum Operating humidity 10 to 90% RH (non-condensing) Dimensions (H x W x D) 8.0 x 7.87 x 2.36 in. (203 x 200 x 60mm) SLSWPS1500 Wall mount PIR motion sensor, 110 detection pattern, isolated relay SLSWUS1500 Wall mount Ultrasonic motion sensor, isolated relay SLSWDS1500 Wall mount Dual-technology; PIR and ultrasonic motion Compatible Low Voltage Switches Low Voltage Switch Description SLSLVS1x 1 button low voltage switch SLSLVS2x 2 button low voltage switch x - W:white, I: Ivory, L: Light Almond, G: Gray, B: Black > Ordering Information Catalog No. Description 5752PP/2R Occupancy Controller with 2 relays, with C-Bus connection 5752PP/2R/2D Occupancy Controller with 2 relays and 2 dimmers, with C-Bus connection 752PP/2R Occupancy Controller with 2 relays, no network connection. Check with your local C-Bus or Schneider Electric sales representative for availability of units that can control electronic ballasts. > Standards - U.S. & Can. Standards Title CSA C22.2 No. 205 UL916 FCC Part 15 Schneider Electric USA, Inc. 320 Tech Park Drive, Suite 100 La Vergne, TN, 37086 1-888-778-2733 www.schneider-electric.us 1200HO1101R11/13 Signal Equipment Energy Management Equipment Class B Digital Device for Home or Office Use All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. (c) 2013 Schneider Electric. All Rights Reserved. 11/2013