Visit www.schneider-electric.us
Make the most of your energy SM
Occupancy Controller
The 5752PP and 752PP Series Occupancy Controllers have two lighting control relays, an occupancy sensor
power supply, two auxiliary input switches, two timers (one per relay), and two relay default mode switches
associated with each relay.
The 5752PP Occupancy Controller includes a C-Bus interface allowing for seamless integration into any C-Bus
network. The 752PP Occupancy Controller is ideal for non-networked applications and comes factory
programmed with selectable auto or manual On settings for each relay.
The Occupancy Controller provides a simple all-in-one solution for dimming, on-off operation, and powering of
sensors. It operates over a wide range of input voltages (100 - 277 VAC) and is designed for above-ceiling
installation. The Occupancy Controller is ideal for in-room occupancy control applications such as classrooms,
open-office space, executive offices and conference rooms.
> Features
• Input voltage range: 100 – 277 VAC 50/60 Hz
• One occupancy sensor input terminal for each relay
• 24 VDC power supply for the occupancy sensor
• One auxiliary input switch terminal and timer for each relay
• One relay fail-safe mode switch for each relay
• Remote override on/off capability
• Class 1 and Class 2 voltage isolation
• C-Bus connectivity option
5752PP and 752PP Series Occupancy Controllers
Occupancy Controller
Schneider Electric USA, Inc.
320 Tech Park Drive, Suite 100
La Vergne, TN, 37086
1-888-778-2733
www.schneider-electric.us
All trademarks are owned by Schneider Electric Industries SAS or its affiliated
companies.
© 2013 Schneider Electric. All Rights Reserved.
1200HO1101R11/13 11/2013
> Specifications
Power supply voltage 100-277VAC
Power supply frequency 50 – 60 Hz
Motion sensor power supply Power output 280 mA (140 mA per detector
connection)
Power supply rating 24 VDC SELV/Class 2
Nominal C-Bus Voltage
Requirements (if connected to C-
Bus network)
Draws 15-36 VDC SELV / Class 2 @ 25 mA from
the C-Bus network, enabling configuration.
Max units per network 80
C-Bus AC Impedance 80 KΩ @ 1 K H z
Relay rating Resistive: 16A at 277 VAC
Incandescent/Tungsten: 12A at 277 VAC
Fluorescent (UL) Standard ballast: 10 A at 277
VAC (inductive 0.4 – 0.5 pf)
Ballast control power supply
(5752PP/2R/2D)
Analog: 1 – 10 VDC 200 mA
DSI: 0 – 12 VDC 200 mA
DALI: 0 – 12 VDC 250 mA
Maximum ballasts per control
(57PP/2R/2D)
100 for DALI or DSI. 50 for 0–10 V analog
Connections (Screw-type Phoenix-
style connectors)
nput: 14 – 12 AWG (2.5 – 4 mm² )
Relay output: 14 – 12 AWG (2.5 – 4 mm² )
Motion detector: 3-pin, 1 per relay present
Auxiliary input: 2-pin, 1 per relay present
C-Bus: 4-pin
Maximum operating temp. 122°F (50 °C) approved for use in a plenum
Operating humidity 10 to 90% RH (non-condensing)
Dimensions (H x W x D) 8.0 x 7.87 x 2.36 in. (203 x 200 x
60mm)
> Ordering Information
Catalog No. Description
5752PP/2R Occupancy Controller with 2 relays, with C-Bus connection
5752PP/2R/2D Occupancy Controller with 2 relays and 2 dimmers, with C-Bus
connection
752PP/2R Occupancy Controller with 2 relays, no network connection.
Check with your local C-Bus or Schneider Electric sales representative for availability
of units that can control electronic ballasts.
>
Standards – U.S. & Can.
Standards Title
CSA C22.2
No. 205
Signal Equipment
UL916 Energy Management Equipment
FCC Part 15 Class B Digital Device for Home or
Office Use
Compatible Occupancy Sensors
Sensor Description
SLSCPS1000 Ceiling mount PIR motion sensor, 360°detection
pattern, isolated relay
SLSCUS2000 Ceiling mount Ultrasonic motion sensor,
360°detection pattern, isolated relay
SLSCDS2000 Ceiling mount Dual-technology (PIR and Ultrasonic)
motion sensor, 360° detection pattern, isolated relay
SLSCDU800 Ceiling mount Ultrasonic motion sensor, 180°
detection pattern, isolated relay
SLSCDS800 Ceiling mount Dual-technology (PIR and Ultrasonic
motion sensor, 180° detection pattern, isolated relay
SLSWPS1500 Wall mount PIR motion sensor, 110° detection
pattern, isolated relay
SLSWUS1500 Wall mount Ultrasonic motion sensor, isolated relay
SLSWDS1500 Wall mount Dual-technology; PIR and ultrasonic
motion
Compatible Low Voltage Switches
Low Voltage Switch Description
SLSLVS1x 1 button low voltage switch
SLSLVS2x 2 button low voltage switch
x - W:white, I: Ivory, L: Light Almond, G: Gray, B: Black
