816 series Amphenol* protected headers 816 series order information three-sidea wire-wrap tails Straight Right-Angle Dimensions Wire Wrap Wire Wrap Pins Style Tail Tail B c D F G K No Lock & Eject 842-816-1027-035 842-816-1029-035 1.26 1.100 860 4 400 620 10 Short Lock & Eject 842-816-1027-135 842-816-1029-135 (32,00) (27,94) (21,84) (10,16) (15,7) Long Lock & Eject 842-816-1027-435 842-816-1029-435 No Lock & Eject 842-816-1427-035 842-816-1429-035 1.46 1.300 1.060 6 .600 620 14 Short Lock & Eject 842-816-1427-135 842-816-1429-135 (37,84) (33,02) (26,92) (15,24) (15,7) Long Lock & Eject 842-816-1427-435 842-816-1429-435 No Lock & Eject 842-816-1627-035 842-816-1629-035 1.56 1.400 1.160 7 .700 620 16 Short Lock & Eject 842-816-1627-135 842-816-1629-135 (39,62) (35,56) (29,46) (17,78) (15,7) Long Lock & Eject 842-816-1627-435 842-816-1629-435 No Lock & Eject 842-B16-2027-035 842-816-2029-035 1.76 1.600 1.360 9 800 620 20 Short Lock & Eject 842-816-2027-135 842-816-2029-135 (44,70) (40,64) (34,54) (22,86) (15,7) Long Lock & Eject 842-816-2027-435 842-816-2029-435 No Lock & Eject 842-816-2627-035 842-816-2629-035 2.06 1.900 1.660 12 1.200 620 26 Short Lock & Eject 842-816-2627-135 842-8 16-2629-135 (53,32) (48,26) (42,16) (30,40) (15,7) Long Lock & Eject 842-816-2627-435 842-816-2629-435 No Lock & Eject 842-816-3027-035 842-816-3029-035 2.26 2.100 1.860 14 1.400 620 30 Short Lock & Eject 842-816-3027-135 842-816-3029-135 (57,40) (63,34) (47,24) (35,56) (15,7) Long Lock & Eject 842-816-3027-435 842-816-3029-435 No Lock & Eject 842-816-3427-035 842-816-3429-035 2.46 2.300 2.060 16 1.600 .620 34 Short Lock & Eject 842-816-3427-135 842-816-3429-135 (62,48) (58,42) (52,32) (40,64) (15,7) Long Lock & Eject 842-816-3427-435 842-816-3429-435 No Lock & Eject 842-816-4027-035 842-816-4029-035 2.76 2.600 2.360 19 1.900 620 40 Short Lock & Eject 842-816-4027-135 842-B16-4029-135 (70,10) (66,04) (59,94) (48,26) (15,7) Long Lock & Eject 842-816-4027-435 842-816-4029-435 No Lock & Eject 842-816-5027-035 842-816-5029-035 3.26 3.100 2.860 24 2.400 620 50 Short Lock & Eject 842-816-5027-135 842-816-5029-135 (82,80) (78,74) (72,64) (60,96) {15,7) Long Lock & Eject 842-816-5027-435 842-816-5029-435 No Lock & Eject 842-816-6027-035 842-816-6029-035 3.76 3.600 3.360 29 2.900 .620 60 Short Lock & Eject 842-816-6027-135 842-816-6029-135 (95,90) (91,44) (85,34) (73,66) (18,7) Long Lock & Eject 842-816-6027-435 842-816-6029-435 No Lock & Eject 842-816-6427-035 842-816-6429-035 3.96 3.800 3.560 31 3.100 620 64 Short Lock & Eject 842-816-6427-135 842-816-6429-135 (100,58) (36,52) (90,42) (78,74) (15,7) Long Lock & Eject 842-816-6427-435 842-816-6429-435 Polarizatian Key Slot Dr, A Le | | ( 14 0) ~J (17 3) K 41(10 4) pL || a \ te 3) 30 a0 1 t 015 TYP 762 aa (0 38) 2,54 K D 230 (5 84) STRAIGHT WIRE WRAP TAILS 3 SIDED RIGHT ANGLE WIRE WRAP TAILS 3 SIDED 20 Me 9005366 OOO0leb 42a my816 series Amphenol protected headers, three and four sided 816 series description solder tail and .620 in wire wrap styles to meet PC board requirements. Lock and styles benefits @ MIL-C-83503 compatible @ Snap-in polarization keys e@ Easy to install lock & eject latches @ Right-angle and straight mounting characteristics Physical Contact spacing: .100" x .100 (2,54mm x 2,54mm) grid Number of contacts: 10, 14, 16, 20, 26, 30, 34, 36, 40, 50, 60, 64. Contact material: Phosphor bronze Contact plating: gold over nickel in Solder plated tails to avoid solder bath contamination Mounting studs option @ UL and CSA recognized @ mating area, solder plated tails Insulation material: Glass reinforced . : thermoplastic, UL flammability ratin All Amphenol headers are available in both right-angle and straight mounting 94 VO. y g configurations with three- and four-sided versions. Tail lengths are .100 and .160 in eject latches may be added to reduce strain on cable and PC boards when removing mating socket connectors. order information Electrical Current rating: 1 amp Insulation Resistance: 5000 megohms (min) Dielectric withstanding voltage: 500 VAC for 60 seconds Operating Temperature Range: 55C to +130C (-67 F to +266 F) UL Recognized to 130 C 842 - 816 - 40 22 -4 number of contacts: -10 20 -34 -60 14 26 40 -64 -16 30 -50 3-sided 4-sided 27 37 = straight wire-wrap tail 29 39 =right angle wire-wrap tail pin configuration: 20 30 = Straight solder tail for 062 PCB 21 31 = straight solder tail for .125 PCB 22 32 =right-angile solder tail for .062 PCB 23 33 =right-angle solder tail for .125 PCB lock & eject (L&E) O=no L&E, no stud and mounting stud 1=short L&E, no stud options: 2=short L&E, short stud 3=short L&E, long stud 4=long L&E, no stud 5=long L&E, short stud 6=long L&E, long stud plating options: Compatible sockets: 842-812, 216 Blue type indicates standard, available product. 18 Mmm 9005346 O0001e4 655 19=15p gold contact area, tin plated tails 35 =30. gold contact area, tin plated tails 35Amphenol protected headers 816 series lock and eject and stud options Latches H J Short 1.015 425 For use with socket connectors (25,8) (10,8) without strain relief Long 1.135 575 For use with socket connectors (28,8) (14,6) with strain relief Part Numbers Short Latch 842-800-1607-005 Long Latch 842-800-1607-006 Short Stud 842-800-0309-001 Long Stud 842-800-0309-002 Studs L M Short .270 450 with short latch 842-B16-XXXX-2XX with long latch = -BXX Long 340 520 with short latch - -3XX with long latch -6XX lock and eject installation and polarization tabs Polarization Tab Part Number: 842-800-161 1-003 recommended mounting hole patiern DIA FOR MOUNTING AFTER P_ATING SOLDER TAIL =WIRE WHAP 040 O03 DIA 045 303 DIA Latch snaps Polarization Tab into place 350-03 389 0071 [7 Feaspcs 100 -G STRAIGHT PINS DIA FOR MOUNTING AFTER PLATING SOLDER TAIL WIRE WRAP o4c aa30IA Ca! (088 0108) (114 008 TYP TYP. 406 002 O14 / (289 0.08) 12 PLCS) 4-008 RIGHT ANGLE FINS Me 9005346 0000125 595], als 2 S6UNC 2A ae 156 DIA c30 035 19 816 series