2007-11-14 Silicon NPN Phototransistor with V Characteristics NPN-Silizium-Fototransistor mit V-Charakteristik Version 1.0 SFH 3710 Features: Besondere Merkmale: * Spectral range of sensitivity: 350 ... 950 nm * Very small SMT package * Spektraler Bereich der Fotoempfindlichkeit: 350 ... 950 nm * Besonderheit: Angepasst an die Augenempfindlichkeit (V) * Sehr kleines SMT Gehause Applications Anwendungen * Special: Adapted to human eye sensitivity (V) * * * * For control and drive circuits Ambient light detector Exposure meter for daylight and artificial light Sensor for backlight-dimming * * * * Messen / Steuern / Regeln Umgebungslichtsensor Beleuchtungssensor Dimmungssensor fur Hintergrundbeleuchtung Ordering Information Bestellinformation Type: Photocurrent Ordering Code Typ: Fotostrom Bestellnummer = 560 nm, Ee = 10 W/cm2, VCE = 5 V IPCE [A] SFH 3710 2.5 ... 12.5 SFH 3710-2/3 2.5 ... 8 Q65110A3512 SFH 3710-3/4 4 ... 12.5 Q65110A3511 Note: Single bins on request Anm.: Einzelgruppen auf Anfrage 2007-11-14 Q65110A3107 1 Version 1.0 SFH 3710 Maximum Ratings (TA = 25 C) Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating and storage temperature range Betriebs- und Lagertemperatur Top; Tstg -40 ... 85 C Collector-emitter voltage Kollektor-Emitter-Spannung VCE 5.5 V Collector current Kollektorstrom IC 20 mA Emitter-collector voltage Emitter-Kollektor-Spannung VEC 0.5 V Characteristics (TA = 25 C) Kennwerte Parameter Symbol Values Werte Unit Bezeichnung Symbol Wavelength of max. sensitivity Wellenlange der max. Fotoempfindlichkeit S max 570 nm Spectral range of sensitivity Spektraler Bereich der Fotoempfindlichkeit 10% 350 ... 950 nm Radiant sensitive area Bestrahlungsempfindliche Flache A Dimensions of chip area Abmessung der Chipflache LxW Half angle Halbwinkel Capacitance Kapazitat (VCE = 0 V, f = 1 MHz, E = 0) CCE 4 pF Dark current Dunkelstrom (VCE = 5 V, E = 0) ICE0 3 ( 50) nA Temperature coefficient Temperaturkoeffizient (Std. Light A) TC 0.9 %/K Temperature coefficient Temperaturkoeffizient ( = 550 nm) TC 0.78 %/K 2007-11-14 2 Einheit 0.29 mm2 0.75 x 0.75 mm x mm 60 Version 1.0 SFH 3710 Grouping (TA = 25 C, = 560 nm) Gruppierung Group Min Photocurrent Max Photocurrent Typ Photocurrent Collector-emitter saturation voltage Gruppe Min Fotostrom Max Fotostrom Typ Fotostrom Ee = 10 W/cm2, VCE = 5 V Ee = 10 W/cm2, VCE = 5 V EV = 1000 lx, Std. IC = I PCEmin x 0.3, Light A, VCE = 5 V Ee = 10 W/cm2 IPCE, min [A] IPCE, max [A] IPCE [A] VCEsat [mV] SFH 3710-2 2.5 5 220 100 SFH 3710-3 4 8 350 100 SFH 3710-4 6.3 12.5 570 100 Kollektor-Emitter Sattigungsspann ung Note.: IPCEmin is the min. photocurrent of the specified group Anm.: IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe Relative Spectral Sensitivity Relative spektrale Empfindlichkeit Srel = f() 100 Photocurrent Fotostrom IPCE = f(EV) OHF04047 OHF04055 10 2 mA Srel % I PCE 10 1 80 70 10 0 60 10 -1 50 40 10 -2 30 20 10 -3 10 0 400 500 600 700 800 900 10 -4 10 0 nm 1100 2007-11-14 10 1 10 2 10 3 10 4 lx 10 5 EV 3 Version 1.0 SFH 3710 Collector-Emitter Capacitance Kollektor-Emitter Kapazitat CCE = f(VCE), f = 1 MHz, E = 0 Photocurrent Fotostrom IPCE = f(EV) OHF04056 100 % I PCE rel C CE OHF04052 4.0 pF 80 3.0 70 2.5 60 50 2.0 40 1.5 30 1.0 20 0.5 10 0 10 0 10 1 10 2 10 3 0 -3 10 10 4 lx 10 5 10 -2 10 -1 10 0 EV 10 1 V 10 2 VCE Directional Characteristics Winkeldiagramm Srel = f() 40 30 20 10 0 OHF01402 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 2007-11-14 1.0 0.8 0.6 0.4 0 4 20 40 60 80 100 120 Version 1.0 SFH 3710 0.95 (0.037) 0.65 (0.026) 0.4 (0.016) 0.2 (0.008) Package Outline Mazeichnung 0.5 (0.020) 0.3 (0.012) 2.1 (0.083) 1.9 (0.075) 1.5 (0.059) 1.3 (0.051) 1.35 (0.053) 1.15 (0.045) Collector mark 1.0 (0.039) 0.8 (0.031) GEOY7009 Dimensions in mm (inch). / Mae in mm (inch). 2007-11-14 5 Version 1.0 SFH 3710 Method of Taping Gurtung Dimensions in mm (inch). / Mae in mm (inch). Recommended Solder Pad Empfohlenes Lotpaddesign 1.25 3.2 1 Bauteil positioniert Component location on pad OHFP2578 Dimensions in mm. / Mae in mm. 2007-11-14 6 Version 1.0 SFH 3710 Reflow Soldering Profile Reflow-Lotprofil Preconditioning: JEDEC Level 2 acc. to JEDEC J-STD-020D.01 OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 s 300 250 t OHA04612 Profile Feature Profil-Charakteristik Symbol Symbol Pb-Free (SnAgCu) Assembly Minimum Ramp-up rate to preheat*) 25 C to 150 C Time tS TSmin to TSmax tS 60 Ramp-up rate to peak*) TSmax to TP Recommendation Maximum 2 3 100 120 2 3 Unit Einheit K/s s K/s Liquidus temperature TL 217 Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 C Time within 5 C of the specified peak temperature TP - 5 K tP 20 30 s 3 6 K/s 10 Ramp-down rate* TP to 100 C 480 Time 25 C to TP All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 2007-11-14 C 7 s Version 1.0 SFH 3710 Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2007-11-14 8 Version 1.0 SFH 3710 Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2007-11-14 9