Multilayer Chip Inductors For High-frequency Circuits And Modules MLG 0402S Series Type Conforming to RoHS Directive Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. Development concept/Features and advantages The MLG Series helps to decrease the size and increase the functions of mobile phones. The world's smallest 0402 type* product line was expanded. *As of April 30, 2010 (based on our survey) Advantages and benefits of MLG0402S Through our original, internal conductor, multilayer structure with reduced loss factors in high-frequency ranges and the improved high-definition multilayer technology, both the industry's smallest degree Rdc value and a superb Q frequency characteristic supporting RF circuits' advanced design needs are realized. This takes mobile phone multi-functioning, downsizing and thinning one step further. ance elements from the skin effect, and the stray capacitance between internal conductors, and between internal conductor and terminal electrode, was achieved. In spite of a volume one third of or less than that of MLG0603S, the increase of the Rdc value was maintained at 50% or less (1nH type: 0.3 max. /12nH type: 1.5 max.). Also, a similar level of self- resonance frequency as the MLG0603S type was achieved (1nH type: 10GHz min./12nH type : 2GHz). Remarkably small footprint through the condensation of the modules The line of 30 products providing superior high Q characteristics in GHz bands. The implementation area of the existing industry smallest 0603 type was reduced by about 54% (occupied board area including land patterns), allowing drastic downsizing of PLL synthesizers, RF modules such as PA and VCO, and TV tuner modules. We have a product line of 30 products in total, including 5 types covering 0.6 -1nH by 0.1nH step and 24 types of the E-24 series finely covering 1.1-10nH as well as the 12nH types. A superb Q-frequency characteristic was achieved to support the latest needs in RF module design in the range of 800MHz-2GHz. Also, an inductance allowance of + - 0.2nH ( 0.6 - 0.9nH + t ype), + 0.3nH(16.2nH type), 5% (6.8-12nH type), which is similar to that of 0603 type, was standardized. The request for a narrow allowance of + - 0.1nH(0.6-3.9nH) and + - 3%(4.7-12nH) can also be accommodated. The increase of Rdc was greatly reduced using our original ultrasmall internal conductor formation technologies Through the minimal, internal conductor, ultraprecise, multilayering technology established through the massproduction processes of the GIGASPIRA structured MLK Series 0603 type, reduction of the high-frequency resist1 TDK-EPC CORPORATION Multilayer Chip Inductors For High-frequency Circuits And Modules MLG Series Characteristics product lineup and comparison of the Q values of 800-2.0GHz band + - 0.2nH MLG0603S L (nH) Inductance tolerance Q 800MHz 1.8GHz 2.4GHz at 100MHz MLG0402S 0.3 20 34 40 0.4 19 30 36 L (nH) 0.5 18 29 35 at 100MHz 0.1nH 0.6 20 33 39 step 0.7 21 33 39 0.8 20 32 38 0.9 19 30 35 1.0 18 1.1 19 1.2 E-24 + - 0.3nH + - 5% Q 800MHz 1.8GHz 2.4GHz 0402S Type The control precision order of the characteristic parameters such as internal conductor width, thickness, Internal interelectrode distance, distance between internal conductor and terminal electrode, and so on, was further improved. Reduction of stray capacity between internal conductors and lowRdc was sought by configuring the internal conductor aspect ratio optimized for the used frequency bands and the 0402 shape. The 12nH type maintains a self-resonant frequency of 2GHz, the same as that of MLG0603S, and the narrow allowance and low-Rdc are on levels similar to those of MLG0603S. 0.6 10 17 21 0.7 11 18 22 0.8 11 19 23 0.9 11 18 21 29 34 1.0 11 17 21 29 34 1.1 11 17 21 18 29 34 1.2 11 19 23 1.3 18 29 33 1.3 11 18 22 1.5 19 29 34 1.5 11 18 21 1.6 18 29 33 1.6 10 17 20 1.8 19 29 33 1.8 10 17 20 2.0 18 28 32 2.0 10 15 18 2.2 18 27 31 2.2 11 18 21 2.4 18 27 32 2.4 10 16 19 2.7 19 28 31 2.7 11 17 20 3.0 19 29 33 3.0 10 16 19 3.3 19 28 31 3.3 11 17 20 3.6 18 26 29 3.6 10 16 18 Recommended PC board pattern 3.9 19 29 32 3.9 11 16 19 (Reflow process) 4.3 18 27 29 4.3 10 15 17 4.7 20 28 30 4.7 10 16 18 5.1 18 25 27 5.1 10 14 16 5.6 20 27 29 5.6 11 16 18 6.2 18 25 26 6.2 9 13 14 6.8 19 26 25 6.8 10 15 17 7.5 18 25 26 7.5 9 13 14 8.2 18 24 24 8.2 10 14 15 9.1 17 22 22 9.1 9 12 12 10 18 23 21 10 10 14 14 11 18 22 20 12 9 12 12 12 19 24 20 13 16 19 15 15 19 20 14 16 16 16 11 18 17 15 7 + - 0.1, + - 0.2, + - 0.3nH 20 16 14 5 + - 3%, + -0.3nH 22 17 13 2 24 15 13 - 27 17 9 - 30 15 6 - 33 16 5 - 36 15 3 - 39 14 - - 43 14 - - 47 13 - - 51 11 - - 56 11 - - 62 10 - - 68 11 - - 75 8 - - 82 8 - - 91 5 - - 100 4 - - E-24 Inductance tolerance + - 0.1, + - 0.2nH + - 3%, + -5% L0.6 x W0.3 x T0.3mm Weight:0.2mg 0.2 + - 0.02 0.4 + - 0.02 0.08 to 0.14 MLG0603S 0.2 + - 0.02 step Shapes and dimensions Weight : 0.07mg typ. Dimensions in mm 0.15 to 0.2 0.15 to 0.2 MLG0402S 0.18 to 0.2 0.1nH 0.2 Dimensions in mm Reflow process is supported by advanced implementation reliability. L0.4 x W0.2 x T0.2mm Weight:0.07mg Sn gilded layers on the surface of the terminal electrodes are high in purity and of great precision, providing good wettability to lead-free soldering components, and flux, such as SnAg-Cu and Sn-Zn. In diverse reliability evaluation tests, the results of soldering heat resistance, occurrence of whiskers, and the joining strength after thermal cycling, were on a similar level as those of conventional Sn-Pb gilded terminal electrode products in terms of implementation reliability. MLG0402S 0603 1005 Recommended soldering conditions Lead-free solder/High-temperature reflow process 240 to 260 C 230 C 180 C 10 s max. Slow cooling 30 to 60 s 150 C Preheating : 60 to120 s TDK-EPC CORPORATION 2 Development background and TDK-EPC's efforts Downsized/low-loss RF circuits essential for multifunctioning The low-loss and drastic downsizing of diverse RF modules such as PA, PLL synthesizers, VCO, and TV tuners have been the utmost urgency for further thinner, lighter, and increased functionality of mobile phones as, while maintain the current size and thickness, the trend of multi-functioning of mobile phones increases with features such as QVGA wide LCDs where you can explore websites designed for PCs, mega-pixel digital camera, high-capacity HDD that can save a large amount of music source and movies, GPS systems, FM/ terrestrial digital TV tuners, wireless communication devices, USB2.0 interface, bar-code generation feature, and support for the FeliCa services. More control ICs which comprises the module core are already shifting to implement bear chips. Module components implemented around ICs such as multilayer ceramic chip capacitors which already have established mass production system are also shifting from 0603 to 0402 type. Chip inductors currently used for impedance matching of mobile phones' RF circuits and modules, or used for high-frequency chokes, are mainly the 0603 type. But with the accelerated shift to downsized mobile phone modules, developing a 0402 type with a superb Q value in the range of 800MHz - 2GHz and a well-balanced Rdc value, as well as an expanded characteristic lineup, is an urgent need. 1608 1005 MLG 0603S 0603Q 1005 MLK 0402S 0603 Exceeding the conventional limits, new low loss/high Q structure, which supports the innovative effort of designing RF circuits, was sought. Full-scale power-saving circuit designs, which allow even longer continuous operation periods, are required for mobile phones with built-in TV and MP3 players. In terms of minimizing chip inductors for the RF modules, this is very important to consider on development of the product. To respond to the most- advanced needs of mobile phones, TDK-EPC has been developing each series of MLK0603 (1- 33nH), MLG0603S (0.3 -100nH), and MLG 0603Q (Reinforced Q type: 0.2-100nH) which combine the industry's lowest Rdc value and superb Q frequency characteristic as the multilayer chip inductor 0603 type for high-frequency modules. These super- small multilayer chip inductors have been adopted for many uses in impedance matching of diverse RF circuits and as power line chokes. FeliCa is a registered trademark of Sony Corporation. 3 These minimum chip inductors supporting usage in high-frequency ranges are mass- produced through the LTCC (low temperature sintered ceramics) processing technology where internal conductor patterns with optimized high-frequency characteristics are printed and layered accurately on low temperature ceramic sheets. On the other hand, for impedance matching of highfrequency circuits, chip inductors with thin-film technology which realize high self-resonance frequency and Q value relatively easily are also adopted. However, these types of chip inductors where a thin-film conductor is formed in a spiral on the element surface have a difficulty in controlling the aspect ratio of the thin-film conductor (ratio of conductor width vs. thickness) and show a limitation in the technology when it controls an increased Rdc value as chip size is further downsized (ie., narrowed conductor width). The conditions of the chip inductors which can accelerate the downsizing, multifunctioning, and power saving of mobile phone RF modules - While seeking the lowest limit of Rdc for the 0402 size by controlling the characteristic parameters such as internal conductor cross sectional shape, pattern shape, and inter-layer connection structure, the inductance and Q supporting the latest design needs of the RF modules and a superb frequency characteristic of the impedance must be maintained. In developing the super- small 0402 type chip, TDKEPC, following the guideline, utilized the knowhow of "GIGASPIRA multilayer structure", the super-small internal conductor forming technology supporting highfrequencies, which had been established through the mass-production processes of the MLK0603, based on MLG0603S, which combines the world's lowest level Rdc value and a superb Q characteristic. Through a technological approach advancing the internal conductor cross-section and the pattern shape control accuracy, the mass-production system of the MLG0402S type exceeds the characteristic advantages of MLG0603S. GIGASPIRA multilayer structure MLK0603 This is a high-Q multilayer chip inductor supporting GHz bands with minimized stray capacitance between internal conductor and terminal electrode using the original GIGASPIRA multilayer structure where internal conductors and terminal electrodes layered in a longitudinal direction are connected via hole conductor formed on the center axis in the element's longitudinal direction. The lateral sides(terminal surface) of the MLK0603 series are 0.3 x 0.3mm. The advanced knowhow of forming super-small internal conductor patterns in this narrow space of micron order is utilized in the mass-production processes of the MLG0402 series. TDK-EPC CORPORATION Multilayer Chip Inductors For High-frequency Circuits And Modules MLG Series 0402S 30 Example of Q vs. frequency characteristics Type 10 nH 25 Measuring instruments Impedance/gain-phase analyzer HP4291A+16197A Q 20 Q 30 15 10 1.0 nH 25 5 20 0 10 15 100 1000 Frequency (MHz) 10000 100 1000 Frequency (MHz) 10000 10 5 30 0 10 25 10000 20 Q 100 1000 Frequency (MHz) Q 30 12 nH 15 10 1.8 nH 25 5 20 0 10 15 10 5 0 10 30 100 1000 Frequency (MHz) 10000 Example of Inductance vs. frequency characteristics Measuring instruments Impedance/gain-phase analyzer HP4291A+16197A 3.3nH 25 20 Q 20 15 18 10 12 nH 16 5 30 100 1000 Frequency (MHz) 5.6 nH 25 20 Q 14 10000 Inductance (nH) 0 10 12 10 nH 10 8 15 6 10 5.6 nH 5 0 10 4 100 1000 Frequency (MHz) 10000 3.3 nH 2 0 10 TDK-EPC CORPORATION 1.8 nH 1.0 nH 100 Frequency (MHz) 1000 3000 4 Electrical characteristics / Frequency characteristics Example of electrical characteristics Part No. Inductance (nH) MLG0402S0N6CT 0.6 MLG0402S0N7CT 0.7 MLG0402S0N8CT 0.8 MLG0402S0N9CT 0.9 MLG0402S1N0ST 1 MLG0402S1N1ST 1.1 MLG0402S1N2ST 1.2 MLG0402S1N3ST 1.3 MLG0402S1N5ST 1.5 MLG0402S1N6ST 1.6 MLG0402S1N8ST 1.8 MLG0402S2N0ST 2 MLG0402S2N2ST 2.2 MLG0402S2N4ST 2.4 MLG0402S2N7ST 2.7 MLG0402S3N0ST 3 MLG0402S3N3ST 3.3 MLG0402S3N6ST 3.6 MLG0402S3N9ST 3.9 MLG0402S4N3ST 4.3 MLG0402S4N7ST 4.7 MLG0402S5N1ST 5.1 MLG0402S5N6ST 5.6 MLG0402S6N2ST 6.2 MLG0402S6N8JT 6.8 MLG0402S7N5JT 7.5 MLG0402S8N2JT 8.2 MLG0402S9N1JT 9.1 MLG0402S10NJT 10 MLG0402S12NJT 12 Inductance tolerance (%) Q min. Inductance, Q test frequency (MHz) Self-resonance frequency (GHz) DC resistance ( ) min. typ. max. typ. + - 0.2nH + - 0.2nH - 100 10 20 up 0.2 0.07 200 - 100 10 20 up 0.2 0.1 200 + - 0.2nH + - 0.2nH - 100 10 20 up 0.25 0.12 200 - 100 10 19.2 0.25 0.13 200 + - 0.3nH + - 0.3nH 3 100 10 16.9 0.25 0.14 200 3 100 10 15.9 0.25 0.13 200 + - 0.3nH + - 0.3nH 3 100 10 16.5 0.3 0.18 200 3 100 10 15.7 0.3 0.18 200 + - 0.3nH + - 0.3nH 3 100 10 13.4 0.3 0.2 150 3 100 10 12.8 0.35 0.22 150 + - 0.3nH + - 0.3nH 3 100 9 10.6 0.35 0.22 150 3 100 8 9.9 0.35 0.21 150 + - 0.3nH + - 0.3nH 3 100 8 10.3 0.4 0.24 150 3 100 8 10 0.45 0.26 150 + - 0.3nH + - 0.3nH 3 100 6.5 9.2 0.5 0.28 150 3 100 6.5 8.7 0.55 0.34 150 + - 0.3nH + - 0.3nH 3 100 6 8.1 0.55 0.35 150 3 100 6 7.9 0.55 0.32 150 + - 0.3nH + - 0.3nH 3 100 5.5 7.6 0.55 0.34 150 3 100 5 7 0.6 0.39 150 + - 0.3nH + - 0.3nH 3 100 4.5 6.5 0.7 0.43 150 3 100 4.5 6.3 0.7 0.39 150 + - 0.3nH + - 0.3nH 3 100 3.5 5.9 0.8 0.51 150 3 100 3.5 5.5 0.8 0.47 150 + - 5% + - 5% 3 100 3.5 5.5 0.8 0.52 150 3 100 3 4.8 0.85 0.54 150 + - 5% + - 5% 3 100 3 4.8 0.9 0.61 150 3 100 2.9 4.4 1 0.65 150 + - 5% + - 5% 3 100 2.8 4.2 1.1 0.72 150 3 100 2.5 3.7 1.2 0.8 150 Rated current :The value where the temperature of the inductor increases by 20C is applied. Measuring Instruments Inductance, Q: HP4291A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents Self-resonance frequency : HP8720C Network analyzer or equivalents DC resistance : YOKOGAWA TYPE7561 or equivalents 5 Rated current (mA) max. TDK-EPC CORPORATION Multilayer Chip Inductors For High-frequency Circuits And Modules MLG Series 0402S Type Example of frequency characteristics Part No. Inductance(nH) typ. 500MHz 800MHz 1.8GH 2GH 2.4GHz Q typ. 500MHz 800MHz 1.8GH 2GH MLG0402S0N6CT 0.5 0.5 0.5 0.5 0.5 8 10 17 19 21 MLG0402S0N7CT 0.6 0.6 0.6 0.6 0.6 8 11 18 19 22 MLG0402S0N8CT 0.7 0.7 0.7 0.7 0.7 9 11 19 21 23 MLG0402S0N9CT 0.8 0.8 0.8 0.8 0.8 8 11 18 19 21 MLG0402S1N0ST 0.9 0.9 0.9 0.9 0.9 9 11 17 19 21 MLG0402S1N1ST 1 1 0.9 0.9 0.9 8 11 17 19 21 MLG0402S1N2ST 1.1 1.1 1 1 1 9 11 19 21 23 MLG0402S1N3ST 1.2 1.1 1.1 1.1 1.1 9 11 18 20 22 MLG0402S1N5ST 1.3 1.3 1.3 1.3 1.3 8 11 18 19 21 MLG0402S1N6ST 1.4 1.4 1.4 1.4 1.4 8 10 17 18 20 MLG0402S1N8ST 1.6 1.6 1.5 1.5 1.6 8 10 17 18 20 MLG0402S2N0ST 1.8 1.7 1.7 1.7 1.7 8 10 15 16 18 MLG0402S2N2ST 2 1.9 1.9 1.9 1.9 9 11 18 19 21 MLG0402S2N4ST 2.1 2.1 2.1 2.1 2.1 8 10 16 18 19 MLG0402S2N7ST 2.4 2.4 2.3 2.4 2.4 9 11 17 19 20 MLG0402S3N0ST 2.6 2.6 2.6 2.6 2.6 8 10 16 17 19 MLG0402S3N3ST 2.9 2.9 2.9 2.9 2.9 9 11 17 19 20 MLG0402S3N6ST 3.2 3.1 3.1 3.1 3.2 8 10 16 17 18 MLG0402S3N9ST 3.5 3.4 3.4 3.4 3.5 8 11 16 17 19 MLG0402S4N3ST 3.8 3.7 3.7 3.8 3.9 8 10 15 16 17 MLG0402S4N7ST 4.2 4.1 4.1 4.2 4.3 8 10 16 17 18 MLG0402S5N1ST 4.5 4.4 4.5 4.6 4.7 8 10 14 15 16 MLG0402S5N6ST 5 4.9 5 5.1 5.3 8 11 16 17 18 MLG0402S6N2ST 5.4 5.3 5.5 5.7 6 8 9 13 14 14 MLG0402S6N8JT 6 5.9 6 6,1 6.4 8 10 15 16 17 MLG0402S7N5JT 6.5 6.4 6.9 7.1 7.6 8 9 13 14 14 MLG0402S8N2JT 7.2 7.1 7.5 7.7 8.2 8 10 14 15 15 MLG0402S9N1JT 7.9 7.8 8.5 8.9 9.8 7 9 12 12 12 MLG0402S10NJT 8.8 8.8 9.8 10 11.1 8 10 14 14 14 MLG0402S12NJT 10.5 10.5 11.9 12.6 14.4 8 9 12 13 12 2.4GHz Inductance, Q: HP4291A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents TDK-EPC CORPORATION 6 Information on related products Multilayer Chip Inductors For High-frequency Circuits And Modules MLG Series 0603S Type Conforming to RoHS Directive Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. Q The total of 56 products provide high Q characteristics, supporting downsizing/optimizing design of mobile phone, small digital device RF circuits The inductance range of 0.3-100nH, which allowed total replacement of the 1005 type for Vcc line chokes used in the RF circuits of small digital devices, has been covered in a refined fashion and with narrow tolerances through the comprehensive product lineup of 56 products of 0.3 -1nH: 0.1nH step; 1.1-100nH : E24 series. L (nH) at 100MHz 800MHz 1.8GHz 2.4GHz 0.3 20 34 40 0.4 19 30 36 0.5 18 29 35 0.1nH 0.6 20 33 39 step 0.7 21 33 39 0.8 20 32 38 0.9 19 30 35 1.0 18 29 34 1.1 19 29 34 1.2 18 29 34 1.3 18 29 33 1.5 19 29 34 1.6 18 29 33 1.8 19 29 33 2.0 18 28 32 2.2 18 27 31 2.4 18 27 32 2.7 19 28 31 3.0 19 29 33 3.3 19 28 31 3.6 18 26 29 3.9 19 29 32 4.3 18 27 29 4.7 20 28 30 5.1 18 25 27 5.6 20 27 29 6.2 18 25 26 6.8 19 26 25 1005 1608 E-24 Shapes and dimensions + - 0.1, + - 0.2nH + - 0.1, + - 0.2, + - 0.3nH + - 3%, + -0.3nH + - 3%, + -5% L (nH) at 100MHz E-24 Q 800MHz 1.8GHz 2.4GHz 7.5 18 25 26 8.2 18 24 24 9.1 17 22 22 10 18 23 21 11 18 22 20 12 19 24 20 13 16 19 15 15 19 20 14 16 16 16 11 18 17 15 7 20 16 14 5 22 17 13 2 24 15 13 - 27 17 9 - 30 15 6 - 33 16 5 - 36 15 3 - 39 14 - - 43 14 - - 47 13 - - 51 11 - - 56 11 - - 62 10 - - 68 11 - - 75 8 - - 82 8 - - 91 5 - - 100 4 - - 0.15 + - 0.05 0.3 + - 0.03 The 1005 type's implementation area (occupied area on the board including the land pattern) was downsized by about 68%. With a single 0603 chip, optimum inductance value can be set for the RF modules and digital terrestrial TV tuners for small mobile devices such as laptop PCs, PDA devices, handy audio visual devices with reinforced communication features, as well as mobile phone RF modules, for which multifunctioning, downsizing, and thinning are sought, and the matching circuits of RF circuit units. 0.3 + - 0.03 0.6 + - 0.03 Inductance tolerance Weight : 0.2mg typ. Dimensions in mm Environmental characteristics Operating temperature range : -55 to +125C Storage temperature rangee : -55 to +125 C 7 TDK-EPC CORPORATION Multilayer Chip Inductors For High-frequency Circuits And Modules Information on related products MLG Series Measuring instruments Impedance/gain-phase analyzer HP4291A+16197A The 0603 type allows reduction of the dimension by 64% (68%, if implementation area, including the land pattern, is considered), and of the volume by 78% compared to the 1005 type. 100nH 56nH Inductance (nH) 33nH 100 Type TDK-EPC's original low loss/high Q multilayered coil structure which sought the maximum exquisiteness Example of Inductance vs. frequency characteristics 1000 0402S 22nH A process-controlling technology has been established to rigorously manage characteristic parameters such as conductor width, thickness, interlayer size, terminal electrode distance, and so forth, promoting a narrow tolerance interval and low Rdc, as well as making it a high inductance product. 10nH 10 3.3nH 1 1nH 0.1 10 100 1000 Frequency (MHz) 10000 Internal structure model Example of Q vs. frequency characteristics Measuring instruments Impedance/gain-phase analyzer HP4291A+16197A Low-dielectric micro ceramic material for which reduced stray capacitance was sought. 50 1nH 40 With Ni + high-purity Sn-plated procssed electrodes, the product complies with lead-free soldering and high-temperature reflow processes. 3.3nH Q 30 20 10nH 22nH 10 56nH 100nH 0 10 100 1000 Frequency (MHz) Recommended PC board pattern (Reflow process) 0.25 0.3 0.25 10000 The advanced LTCC (Low Temperature Cofire Ceramic System) process, which promotes further high inductance and high Q, with optimized sheet physical properties, low profiling and multi layering, and finely drawn internal conductor patterns, is integrated with the super tiny chip, establishing a processing technology for highly stable mass production of spiral internal conductors that's more detailed and precise than the conventional pattern formation accuracy. 0.3 Dimensions in mm Recommended soldering conditions Lead-free solder/High-temperature reflow process 240 to 260 C 230 C 180 C 10 s max. Slow cooling 30 to 60 s 150 C Preheating : 60 to120 s TDK-EPC CORPORATION 8 Information on related products Example of electrical characteristics Inductance (nH) Part No. MLG0603S0N3 T 0.3 MLG0603S0N4 T 0.4 MLG0603S0N5 T 0.5 MLG0603S0N6 T 0.6 MLG0603S0N7 T 0.7 MLG0603S0N8 T 0.8 MLG0603S0N9 T 0.9 MLG0603S1N0 T 1.0 MLG0603S1N1 T 1.1 MLG0603S1N2 T 1.2 MLG0603S1N3 T 1.3 MLG0603S1N5 T 1.5 MLG0603S1N6 T 1.6 MLG0603S1N8 T 1.8 MLG0603S2N0 T 2.0 MLG0603S2N2 T 2.2 MLG0603S2N4 T 2.4 MLG0603S2N7 T 2.7 MLG0603S3N0 T 3.0 MLG0603S3N3 T 3.3 MLG0603S3N6 T 3.6 MLG0603S3N9 T 3.9 MLG0603S4N3 T 4.3 MLG0603S4N7 T 4.7 MLG0603S5N1 T 5.1 MLG0603S5N6 T 5.6 MLG0603S6N2 T 6.2 MLG0603S6N8 T 6.8 MLG0603S7N5 T 7.5 MLG0603S8N2 T 8.2 MLG0603S9N1 T 9.1 MLG0603S10N T 10 MLG0603S11N T 11 MLG0603S12N T 12 MLG0603S13N T 13 MLG0603S15N T 15 MLG0603S16N T 16 MLG0603S18N T 18 Inductance tolerance (%) Q min. Inductance, Q test frequency (MHz) Self-resonance frequency (GHz) DC resistance ( ) min. typ. max. typ. + - 0.1, + - 0.2nH + - 0.1, + - 0.2nH - 100 10 20 up 0.1 0.02 600 - 100 10 20 up 0.1 0.02 600 + - 0.1, + - 0.2nH + - 0.1, + - 0.2nH + + 0.1, - 0.2nH - 100 10 20 up 0.1 0.02 600 - 100 10 20 up 0.1 0.02 600 - 100 10 16.3 0.1 0.02 600 + - 0.1, + - 0.1, + - 0.2nH + - 0.2nH - 100 10 16.1 0.1 0.03 600 - 100 10 13.8 0.1 0.03 600 + - 0.1, + - 0.2, + - 0.3nH + - 0.1, + - 0.2, + - 0.3nH + + + - 0.1, - 0.2, - 0.3nH 4 100 10 14.4 0.1 0.04 600 4 100 10 13.6 0.15 0.04 550 4 100 10 12.3 0.15 0.06 550 + - 0.1, + - 0.2, + - 0.3nH + + + 0.1, 0.2, - 0.3nH + - 0.1, + - 0.2, + - 0.3nH 4 100 9 11.4 0.15 0.07 550 4 100 9 10.4 0.15 0.07 550 4 100 9 11.5 0.2 0.09 500 + - 0.1, + - 0.1, + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 4 100 8.5 10 0.2 0.12 500 4 100 8.2 9.8 0.25 0.14 400 + - 0.1, + - 0.1, + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 4 100 8 8.9 0.25 0.14 400 4 100 8 9.2 0.25 0.15 300 + - 0.1, + - 0.2, + + - 0.1, - 0.2, + - 0.1, + - 0.2, + - 0.3nH + - 0.3nH 4 100 6.5 8.1 0.25 0.15 300 4 100 6.2 7.8 0.3 0.2 300 + - 0.3nH + + + 0.1, 0.2, - 0.3nH + - 0.1, + - 0.2, + - 0.3nH 4 100 5.8 7 0.35 0.23 300 4 100 5.5 6.9 0.35 0.22 300 5 100 5 6.6 0.4 0.27 300 + - 3%, + - 3%, + - 0.3nH + - 0.3nH 5 100 5 6.4 0.4 0.27 300 5 100 4.5 5.4 0.45 0.28 300 + - 3%, + - 3%, + - 0.3nH + - 0.3nH 5 100 4.5 5.5 0.45 0.23 250 5 100 4.2 5.3 0.5 0.31 250 + - 3%, + - 0.3nH + + - 3%, - 5% + - 3%, + - 5% 5 100 4.2 5.1 0.55 0.32 250 5 100 3.6 4.4 0.6 0.32 250 5 100 4.2 5.3 0.7 0.43 200 + - 3%, + - 5% + - 3%, + - 5% + + 3%, - 5% 5 100 3.8 4.5 0.7 0.45 200 5 100 3.4 4.9 0.8 0.51 200 5 100 3.2 4.1 0.8 0.53 200 + - 3%, + - 3%, + - 5% + - 5% 6 100 3 3.7 0.8 0.53 200 6 100 2.8 3.6 0.9 0.63 180 + - 3%, + - 3%, + - 5% + - 5% 6 100 2.7 3.4 0.9 0.6 180 6 100 2.5 3.3 1.1 0.69 180 + - 3%, + - 5% + - 3%, + - 5% 6 100 2.3 3 1.1 0.7 180 6 100 2.2 2.8 1.2 0.78 150 " " in the part numbers shows inductance tolerance symbols (B: + - 0.1nH/C: + - 0.2nH/S: + - 0.3nH/H: + -3%/J: + - 5%) Rated current :The value where the temperature of the inductor increases by 20C is applied. Measuring Instruments Inductance, Q: HP4291A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents Self-resonance frequency : HP8720C Network analyzer or equivalents DC resistance : YOKOGAWA TYPE7561 or equivalents 9 Rated current (mA) max. TDK-EPC CORPORATION Multilayer Chip Inductors For High-frequency Circuits And Modules Information on related products MLG Series 0402S Type Example of electrical characteristics Inductance (nH) Part No. MLG0603S20N T 20 MLG0603S22N T 22 MLG0603S24N T 24 MLG0603S27N T 27 MLG0603S30N T 30 MLG0603S33N T 33 MLG0603S36N T 36 MLG0603S39N T 39 MLG0603S43N T 43 MLG0603S47N T 47 MLG0603S51N T 51 MLG0603S56N T 56 MLG0603S62N T 62 MLG0603S68N T 68 MLG0603S75N T 75 MLG0603S82N T 82 MLG0603S91N T 91 MLG0603SR10 T 100 Inductance tolerance (%) Q min. Inductance, Q test frequency (MHz) Self-resonance frequency (GHz) DC resistance ( ) min. typ. max. typ. Rated current (mA) max. + - 3%, + - 5% + - 3%, + - 5% 6 100 2.1 2.6 1.2 0.75 150 6 100 2 2.5 1.2 0.88 150 + - 3%, + - 5% + - 3%, + - 5% + + 3%, - 5% 6 100 1.9 2.3 1.3 0.9 150 6 100 1.8 2.2 1.5 1 100 6 100 1.6 2 1.6 0.95 100 + - 3%, + - 3%, + - 5% + - 5% 6 100 1.6 2 1.8 1.2 100 6 100 1.5 1.8 2 1.68 50 + - 3%, + - 5% + - 3%, + - 5% 6 100 1.4 1.6 2 1.4 50 6 100 1.3 1.6 2.2 1.91 50 + - 3%, + - 5% + - 3%, + - 5% 6 100 1.3 1.5 2.2 1.48 50 5 100 1.2 1.5 2.8 1.98 50 + - 3%, + - 5% + - 3%, + - 5% + + 3%, - 5% 5 100 1.2 1.4 3.2 2.11 50 5 100 1.1 1.3 3.3 2.22 50 5 100 1.05 1.2 3.5 2.4 50 + - 3%, + - 3%, + - 5% + - 5% 5 100 0.95 1.2 3.8 2.67 50 5 100 0.9 1.1 4 2.8 50 + - 3%, + - 5% + - 3%, + - 5% 5 100 0.77 0.9 4.3 2.97 50 5 100 0.77 0.9 4.5 3.13 50 " " in the part numbers shows inductance tolerance symbols (B: + - 0.1nH/C: + - 0.2nH/S: + - 0.3nH/H: + -3%/J: + - 5%) Rated current :The value where the temperature of the inductor increases by 20C is applied. Measuring Instruments Inductance, Q: HP4291A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents Self-resonance frequency : HP8720C Network analyzer or equivalents DC resistance : YOKOGAWA TYPE7561 or equivalents TDK-EPC CORPORATION 10 Information on related products Example of frequency characteristics Part No. Inductance(nH) typ. 500MHz 800MHz 1.8GH 2GH 2.4GHz Q typ. 500MHz 800MHz 1.8GH 2GH MLG0603S0N3 0.3 0.3 0.3 0.3 0.3 14.5 19.9 34.1 34.8 40.4 MLG0603S0N4 0.4 0.4 0.4 0.4 0.4 14 18.9 30.1 32.1 35.9 MLG0603S0N5 0.5 0.5 0.45 0.45 0.45 14.1 18.4 29.3 31.7 35.4 MLG0603S0N6 0.6 0.6 0.5 0.5 0.5 15.6 19.8 32.8 34.2 38.6 MLG0603S0N7 0.7 0.6 0.6 0.6 0.6 16.3 21.4 33.1 34.7 38.6 MLG0603S0N8 0.7 0.7 0.7 0.7 0.7 15.4 20.4 32.1 34.1 37.8 MLG0603S0N9 0.8 0.8 0.8 0.8 0.8 15.1 19.3 30.1 31.8 35.3 MLG0603S1N0 0.9 0.9 0.9 0.9 0.9 14.3 18.3 28.8 30.3 33.8 MLG0603S1N1 1 1 1 1 1 14.4 18.7 29.1 30.5 34.1 MLG0603S1N2 1.1 1.1 1.1 1.1 1.1 14.2 18.3 28.6 30.3 33.5 MLG0603S1N3 1.2 1.2 1.2 1.2 1.2 14.3 18.3 28.6 30 33.2 MLG0603S1N5 1.4 1.4 1.4 1.4 1.4 14.8 18.8 29 30.4 33.5 MLG0603S1N6 1.5 1.5 1.5 1.5 1.5 14.3 18.4 28.6 30.1 33.4 MLG0603S1N8 1.7 1.7 1.7 1.7 1.7 14.7 18.9 28.7 30.1 33.1 MLG0603S2N0 1.9 1.9 1.9 1.9 1.9 13.9 18 27.7 29.2 32.2 MLG0603S2N2 2.1 2 2.1 2.1 2.1 13.8 17.7 26.8 27.9 30.7 MLG0603S2N4 2.2 2.2 2.2 2.3 2.3 13.9 17.9 27.4 28.5 31.5 MLG0603S2N7 2.5 2.5 2.6 2.6 2.7 14.6 18.6 27.8 28.8 31.4 MLG0603S3N0 2.8 2.8 2.9 2.9 3 15.1 19.4 29.4 30.6 33.4 MLG0603S3N3 3.1 3.1 3.2 3.3 3.4 15.1 19.2 28.2 29.2 31.4 MLG0603S3N6 3.4 3.4 3.5 3.6 3.7 13.8 17.8 26.2 27 29 MLG0603S3N9 3.7 3.7 3.8 3.9 4.1 15.1 19.4 28.5 29.4 31.6 MLG0603S4N3 4.1 4.1 4.3 4.4 4.6 14.3 18.3 26.5 27.3 28.9 MLG0603S4N7 4.4 4.4 4.8 4.9 5.2 15.2 19.5 27.9 28.6 30.1 MLG0603S5N1 4.8 4.8 5.1 5.3 5.6 13.8 17.5 25 25.5 26.7 MLG0603S5N6 5.3 5.3 5.7 5.9 6.4 15.5 19.6 27.2 27.8 28.8 MLG0603S6N2 5.9 5.9 6.5 6.8 7.5 14.5 18.3 25.1 25.4 25.7 MLG0603S6N8 6.4 6.5 7.4 7.8 8.7 15.4 19.4 25.7 25.7 25.3 MLG0603S7N5 7.1 7.1 7.8 8 8.7 14.2 18 25.2 25.6 26.4 MLG0603S8N2 7.8 7.8 8.8 9.3 10.4 14.7 18.2 23.9 24 23.6 MLG0603S9N1 8.6 8.6 9.8 10.3 11.5 13.5 16.9 22.2 22.3 21.8 MLG0603S10N 9.5 9.6 11.5 12.3 14.5 14.9 18.4 22.8 22.4 20.8 MLG0603S11N 10.4 10.5 12.6 13.6 16.1 14.5 17.8 22.1 21.7 20 MLG0603S12N 11.4 11.7 14.2 15.4 18.7 15.6 19.3 23.5 22.7 20.4 MLG0603S13N 12.2 12.5 15.6 17.2 21.6 13.6 16.3 18.7 17.9 15.3 MLG0603S15N 14.4 14.8 20.1 23 32.6 15.2 18.5 19.9 18.3 13.9 MLG0603S16N 15.1 15.6 21.7 25.1 37.2 13.5 15.9 16.4 14.8 10.7 MLG0603S18N 17.3 18 28.3 35.3 72.3 14.2 17 15.4 12.9 6.7 Inductance, Q: HP4291A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents 11 TDK-EPC CORPORATION 2.4GHz Multilayer Chip Inductors For High-frequency Circuits And Modules Information on related products MLG Series 0402S Type Example of frequency characteristics Part No. Inductance(nH) typ. 500MHz 800MHz 1.8GH 2GH 2.4GHz Q typ. 500MHz 800MHz 1.8GH 2GH MLG0603S20N 19.1 20 32.4 41.6 101.9 13.4 15.6 13.5 11 4.7 MLG0603S22N 21.3 22.5 40.4 55.8 231.8 14.8 17.3 13.4 10.1 2.1 MLG0603S24N 23 24.3 44.7 63.6 103.9 13.1 15.3 12.8 10.2 MLG0603S27N 26.5 28.6 68.3 130.9 14.6 16.7 9.3 4.9 MLG0603S30N 29.3 32.1 110.7 13.1 14.5 5.5 0.6 MLG0603S33N 32.6 36 144.5 14.2 15.9 5.2 0.5 MLG0603S36N 36 40.2 254.6 14 15.1 2.8 MLG0603S39N 39.5 46.5 13.1 13.7 MLG0603S43N 44.4 53.1 13.5 13.6 MLG0603S47N 48.6 59.5 12.8 12.5 MLG0603S51N 52.2 63.8 11 10.7 MLG0603S56N 59.2 77.2 12 10.9 MLG0603S62N 66.1 88.2 11.3 9.9 MLG0603S68N 74.4 103.9 12.5 10.7 MLG0603S75N 81.8 119.1 10.3 8.3 MLG0603S82N 95.5 161.3 11.8 8.2 MLG0603S91N 109.1 228.6 8.8 4.8 MLG0603SR10 129.3 353.5 10.5 4.4 2.4GHz Inductance, Q: HP4291A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents TDK-EPC CORPORATION 12 MLG Series / Data sheets MLG0603Q Inductance (nH) Part No. Inductance tolerance (%) Q min. Inductance, Q test frequency (MHz) Self-resonance frequency (GHz) DC resistance ( ) min. typ. max. typ. + - 0.1, + - 0.1, + - 0.2nH + - 0.2nH - 100 10 20 up 0.1 0.01 600 - 100 10 20 up 0.1 0.02 600 + - 0.1, + - 0.1, + - 0.2nH + - 0.2nH - 100 10 20 up 0.1 0.02 600 - 100 10 20 up 0.1 0.02 600 + - 0.1, + - 0.2nH + + - 0.1, - 0.2nH + - 0.1, + - 0.2nH - 100 10 20 up 0.1 0.03 600 - 100 10 20 up 0.1 0.04 600 - 100 10 17.5 0.1 0.03 600 + - 0.1, + - 0.1, + - 0.2nH + - 0.2, + - 0.3nH - 100 10 16.3 0.1 0.04 600 5 100 10 14.2 0.1 0.06 600 + - 0.1, + - 0.1, + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 5 100 10 14.9 0.15 0.06 550 5 100 10 14.7 0.15 0.05 550 + - 0.1, + - 0.1, + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 5 100 10 13.6 0.15 0.05 550 5 100 9 12 0.15 0.06 550 + - 0.1, + - 0.2, + + - 0.1, - 0.2, + - 0.1, + - 0.2, + - 0.3nH + - 0.3nH 5 100 9 10.7 0.2 0.08 550 5 100 9 11.3 0.2 0.08 500 + - 0.3nH + + + 0.1, 0.2, - 0.3nH + + + - 0.1, - 0.2, - 0.3nH 5 100 8.5 10 0.2 0.08 500 5 100 8.5 10.3 0.2 0.09 500 5 100 7.5 8.9 0.2 0.08 500 + - 0.1, + - 0.1, + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 5 100 7.5 9.4 0.2 0.09 500 5 100 7.5 8.8 0.2 0.09 500 + - 0.1, + - 0.1, + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 5 100 7.5 9.3 0.2 0.08 500 5 100 7.5 10 0.3 0.17 450 + - 0.1, + - 0.2, + + - 0.1, - 0.2, + - 0.1, + - 0.2, + - 0.3nH + - 0.3nH 5 100 7.5 9.3 0.3 0.14 450 5 100 7 9.1 0.3 0.17 450 + - 0.3nH + + + 0.1, 0.2, - 0.3nH + + + - 0.1, - 0.2, - 0.3nH 5 100 6.5 8 0.3 0.13 450 5 100 6.5 7.7 0.3 0.11 450 5 100 6.2 7.9 0.3 0.14 300 + - 0.1, + - 0.1, + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 5 100 6.2 7.6 0.3 0.13 300 5 100 6 7.4 0.3 0.12 300 + - 0.1, + - 0.1, + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 5 100 6 7.2 0.3 0.15 300 5 100 6 7.1 0.3 0.15 300 + - 0.1, + - 0.2, + + - 0.1, - 0.2, + - 0.1, + - 0.2, + - 0.3nH + - 0.3nH 5 100 5.8 7.1 0.3 0.15 300 5 100 5.8 7.1 0.3 0.15 300 + - 0.3nH + + + 0.1, 0.2, - 0.3nH + - 0.1, + - 0.2, + - 0.3nH 5 100 5.8 6.8 0.35 0.18 300 5 100 5.8 7.4 0.35 0.2 300 5 100 5.8 7.4 0.4 0.23 300 + - 0.3nH + - 0.3nH 5 100 5.8 7.3 0.4 0.23 300 3.9 + - 0.1, + - 0.1, 5 100 5.8 7.3 0.4 0.24 300 4 + - 0.1, + - 0.2, + - 0.3nH 5 100 5.8 7.1 0.4 0.23 300 MLG0603Q0N2 T 0.2 MLG0603Q0N3 T 0.3 MLG0603Q0N4 T 0.4 MLG0603Q0N5 T 0.5 MLG0603Q0N6 T 0.6 MLG0603Q0N7 T 0.7 MLG0603Q0N8 T 0.8 MLG0603Q0N9 T 0.9 MLG0603Q1N0 T 1 MLG0603Q1N1 T 1.1 MLG0603Q1N2 T 1.2 MLG0603Q1N3 T 1.3 MLG0603Q1N4 T 1.4 MLG0603Q1N5 T 1.5 MLG0603Q1N6 T 1.6 MLG0603Q1N7 T 1.7 MLG0603Q1N8 T 1.8 MLG0603Q1N9 T 1.9 MLG0603Q2N0 T 2 MLG0603Q2N1 T 2.1 MLG0603Q2N2 T 2.2 MLG0603Q2N3 T 2.3 MLG0603Q2N4 T 2.4 MLG0603Q2N5 T 2.5 MLG0603Q2N6 T 2.6 MLG0603Q2N7 T 2.7 MLG0603Q2N8 T 2.8 MLG0603Q2N9 T 2.9 MLG0603Q3N0 T 3 MLG0603Q3N1 T 3.1 MLG0603Q3N2 T 3.2 MLG0603Q3N3 T 3.3 MLG0603Q3N4 T 3.4 MLG0603Q3N5 T 3.5 MLG0603Q3N6 T 3.6 MLG0603Q3N7 T 3.7 MLG0603Q3N8 T 3.8 MLG0603Q3N9 T MLG0603Q4N0 T + - 0.2, + - 0.2, " " in the part numbers shows inductance tolerance symbols (B: + - 0.1nH/C: + - 0.2nH/S: + - 0.3nH/H: + -3%/J: + - 5%) Rated current :The value where the temperature of the inductor increases by 20C is applied. Measuring Instruments Inductance, Q: HP4291A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents Self-resonance frequency : HP8720C Network analyzer or equivalents DC resistance : YOKOGAWA TYPE7561 or equivalents 13 Rated current (mA) max. TDK-EPC CORPORATION Multilayer Chip Inductors For High-frequency Circuits And Modules MLG Series / Data sheets MLG Series 0402S Type MLG0603Q MLG0603Q4N3 T 4.3 MLG0603Q4N7 T 4.7 MLG0603Q5N1 T 5.1 MLG0603Q5N6 T 5.6 MLG0603Q6N2 T 6.2 MLG0603Q6N8 T 6.8 MLG0603Q7N5 T 7.5 MLG0603Q8N2 T 8.2 MLG0603Q9N1 T 9.1 MLG0603Q10N T 10 MLG0603Q11N T 11 MLG0603Q12N T 12 MLG0603Q13N T 13 MLG0603Q15N T 15 MLG0603Q16N T 16 MLG0603Q18N T 18 MLG0603Q20N T 20 MLG0603Q22N T 22 MLG0603Q24N T 24 MLG0603Q27N T 27 MLG0603Q30N T 30 MLG0603Q33N T 33 MLG0603Q36N T 36 MLG0603Q39N T 39 MLG0603Q43N T 43 MLG0603Q47N T 47 MLG0603Q51N T 51 MLG0603Q56N T 56 MLG0603Q62N T 62 MLG0603Q68N T 68 MLG0603Q75N T 75 MLG0603Q82N T 82 MLG0603Q91N T 91 MLG0603QR10 T 100 Inductance tolerance (%) Q min. Inductance, Q test frequency (MHz) Self-resonance frequency (GHz) DC resistance ( ) Rated current (mA) max. min. typ. max. typ. + - 3%, + - 3%, + - 0.3nH + - 0.3nH 5 100 5.2 6.4 0.4 0.21 300 5 100 5.2 6.9 0.45 0.25 300 + - 3%, + - 3%, + - 0.3nH + - 0.3nH 5 100 5 6 0.5 0,3 250 5 100 4.2 5.5 0.5 0.28 250 + - 3%, + - 0.3nH + + - 3%, - 5% + - 3%, + - 5% 5 100 4.2 5.3 0.55 0.32 250 5 100 4.2 5.5 0.6 0.34 250 5 100 3.8 4.8 0.7 0.36 220 + - 3%, + - 3%, + - 5% + - 5% 5 100 3.8 4.9 0.7 0.44 220 5 100 3.6 4.4 0.8 0.49 200 + - 3%, + - 3%, + - 5% + - 5% 5 100 3.6 4.7 0.8 0.52 200 6 100 3.6 4.5 0.8 0.48 200 + - 3%, + - 3%, + - 5% + - 5% 6 100 3 3.8 1 0.56 180 6 100 3 3.9 1 0.63 180 + - 3%, + - 5% + + - 3%, - 5% + - 3%, + - 5% 6 100 3 3.8 1.1 0.69 180 6 100 2.8 3.6 1.1 0.64 180 6 100 2.5 3.3 1.2 0.75 150 + - 3%, + - 3%, + - 5% + - 5% 6 100 2.3 3 1.2 0.8 150 6 100 2.2 2.9 1.2 0.83 150 + - 3%, + - 3%, + - 5% + - 5% 6 100 2.1 2.7 1.3 0.9 150 6 100 2.0 2.6 1.5 0.96 100 + - 3%, + - 3%, + - 5% + - 5% 6 100 1.8 2.4 1.5 1.06 100 6 100 1.7 2.4 1.7 1.13 100 + - 3%, + - 5% + + - 3%, - 5% + - 3%, + - 5% 6 100 1.6 2.2 1.8 1.21 80 6 100 1.5 1.9 2.5 1.8 80 6 100 1.4 1.8 2.7 1.94 80 + - 3%, + - 3%, + - 5% + - 5% 6 100 1.3 1.7 2.7 1.88 80 6 100 1.3 1.6 2.8 2.04 60 + - 3%, + - 3%, + - 5% + - 5% 6 100 1.2 1.5 3.2 2.27 60 6 100 1.1 1.4 3.3 2.38 60 + - 3%, + - 3%, + - 5% + - 5% 6 100 1.1 1.4 3.5 2.53 60 6 100 1.05 1.3 3.8 2.7 60 + - 3%, + - 5% + + - 3%, - 5% + - 3%, + - 5% 6 100 1 1.3 4 2.93 60 6 100 0.9 1.2 4.3 3.01 60 6 100 0.85 1.1 4.5 3.16 60 " " in the part numbers shows inductance tolerance symbols (B: + - 0.1nH/C: + - 0.2nH/S: + - 0.3nH/H: + -3%/J: + - 5%) Rated current :The value where the temperature of the inductor increases by 20C is applied. Measuring Instruments Inductance, Q: HP4291A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents Self-resonance frequency : HP8720C Network analyzer or equivalents DC resistance : YOKOGAWA TYPE7561 or equivalents 0.6 + - 0.03 0.3 + - 0.03 Inductance (nH) Part No. 0.3 + - 0.03 0.06 + - 0.04 1.15 + - 0.05 TDK-EPC CORPORATION Weight : 0.2mg typ. Dimensions in mm 14 MLG Series / Data sheets MLG0603Q Part No. Inductance(nH) typ. 500MHz 800MHz 1.8GH 2GH 2.4GHz Q typ. 500MHz 800MHz 1.8GH 2GH MLG0603Q0N2 0.2 0.2 0.2 0.2 0.2 27 30 47 48 56 MLG0603Q0N3 0.3 0.3 0.3 0.3 0.3 17 22 36 37 42 MLG0603Q0N4 0.4 0.4 0.4 0.4 0.4 17 22 34 35 39 MLG0603Q0N5 0.5 0.5 0.45 0.45 0.45 15 20 31 33 37 MLG0603Q0N6 0.6 0.6 0.5 0.5 0.5 17 22 34 36 39 MLG0603Q0N7 0.7 0.6 0.6 0.6 0.6 17 22 35 36 41 MLG0603Q0N8 0.7 0.7 0.7 0.7 0.7 17 23 36 37 42 MLG0603Q0N9 0.8 0.8 0.8 0.8 0.8 18 23 36 38 42 MLG0603Q1N0 0.9 0.9 0.9 0.9 0.9 18 23 36 38 43 MLG0603Q1N1 1 1 1 1 1 16 20 32 34 38 MLG0603Q1N2 1.1 1.1 1.1 1.1 1.1 17 21 33 34 39 MLG0603Q1N3 1.2 1.2 1.2 1.2 1.2 17 21 33 35 39 MLG0603Q1N4 1.3 1.3 1.3 1.3 1.3 17 22 34 36 41 MLG0603Q1N5 1.4 1.4 1.4 1.4 1.4 17 21 33 35 39 MLG0603Q1N6 1.5 1.5 1.5 1.5 1.5 18 23 36 38 42 MLG0603Q1N7 1.6 1.6 1.6 1.6 1.6 19 24 38 40 45 MLG0603Q1N8 1.7 1.7 1.7 1.7 1.7 18 23 35 37 41 MLG0603Q1N9 1.8 1.8 1.8 1.8 1.8 20 25 40 42 47 MLG0603Q2N0 1.9 1.9 1.9 1.9 1.9 18 23 36 38 42 MLG0603Q2N1 2 2 2 2 2.1 19 24 37 39 43 MLG0603Q2N2 2 2 2.1 2.1 2.1 16 20 31 33 36 MLG0603Q2N3 2.2 2.2 2.2 2.2 2.3 17 23 36 37 42 MLG0603Q2N4 2.3 2.3 2.3 2.3 2.4 18 23 36 38 42 MLG0603Q2N5 2.4 2.4 2.4 2.4 2.5 18 23 35 37 40 MLG0603Q2N6 2.5 2.4 2.5 2.5 2.6 18 23 35 37 40 MLG0603Q2N7 2.5 2.5 2.6 2.6 2.7 17 22 33 34 38 MLG0603Q2N8 2.6 2.6 2.7 2.7 2.8 19 24 36 37 41 MLG0603Q2N9 2.7 2.7 2.8 2.9 3 19 24 36 37 40 MLG0603Q3N0 2.8 2.8 2.9 3 3.1 19 24 35 36 39 MLG0603Q3N1 2.9 2.9 3 3.1 3.2 18 23 34 36 38 MLG0603Q3N2 3 3 3.1 3.2 3.3 18 23 34 35 38 MLG0603Q3N3 3.1 3.1 3.2 3.3 3.4 18 23 34 35 38 MLG0603Q3N4 3.2 3.2 3.3 3.4 3.5 18 23 33 35 37 MLG0603Q3N5 3.3 3.3 3.4 3.5 3.6 17 22 32 33 36 MLG0603Q3N6 3.4 3.4 3.5 3.6 3.7 16 21 32 34 37 MLG0603Q3N7 3.5 3.5 3.6 3.7 3.8 18 23 34 35 38 MLG0603Q3N8 3.6 3.6 3.7 3.8 3.9 17 23 34 35 38 MLG0603Q3N9 3.7 3.7 3.8 3.9 4 17 22 33 35 38 MLG0603Q4N0 3.8 3.8 4 4 4.2 18 23 34 35 38 Inductance, Q: HP4291A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents 15 TDK-EPC CORPORATION 2.4GHz Multilayer Chip Inductors For High-frequency Circuits And Modules MLG Series / Data sheets MLG Series 0402S Type MLG0603Q Part No. Inductance(nH) typ. 500MHz 800MHz 1.8GH 2GH 2.4GHz Q typ. 500MHz 800MHz 1.8GH 2GH MLG0603Q4N3 4.1 4.1 4.3 4.4 4.6 17 22 32 33 36 MLG0603Q4N7 4.4 4.4 4.6 4.7 4.9 16 21 32 33 36 MLG0603Q5N1 4.9 4.9 5.1 5.3 5.5 17 22 32 33 36 MLG0603Q5N6 5.3 5.4 5.7 5.9 6.2 18 23 32 33 35 MLG0603Q6N2 5.9 5.9 6.4 6.6 7.1 17 22 31 31 33 MLG0603Q6N8 6.4 6.4 6.9 7.1 7.6 17 21 30 31 33 MLG0603Q7N5 7.1 7.2 8.1 8.5 9.4 17 22 29 30 30 MLG0603Q8N2 7.8 7.8 8.5 8.8 9.5 16 20 28 28 29 MLG0603Q9N1 8.7 8.8 9.9 10.4 11.5 17 21 27 27 27 MLG0603Q10N 9.5 9.6 10.8 11.3 12.5 16 21 27 28 28 MLG0603Q11N 10.4 10.5 12.2 12.9 14.8 15 18 24 24 24 MLG0603Q12N 11.5 11.7 14.3 15.5 18.8 16 20 24 23 21 MLG0603Q13N 12.3 12.5 15.1 16.4 19.7 15 19 24 24 22 MLG0603Q15N 14.4 14.6 17.4 18.8 22.2 17 21 26 26 24 MLG0603Q16N 15.2 15.6 19.8 22 28.2 15 19 22 22 19 MLG0603Q18N 17.2 17.6 23.4 26.4 35.8 15 18 21 20 17 MLG0603Q20N 19.1 19.7 27.7 32.4 49.3 14 17 18 16 12 MLG0603Q22N 21 21.8 31.6 37.6 61.9 14 17 18 16 11 MLG0603Q24N 23 24.1 38.1 48 104.7 14 16 15 13 6 MLG0603Q27N 26 27.3 44.9 58.4 168.9 14 17 15 12 5 MLG0603Q30N 29 30.7 57.1 81.7 14 17 13 10 2 MLG0603Q33N 32.1 34.2 68.9 107.2 15 17 12 8 MLG0603Q36N 35.1 37.9 90.9 175.3 14 16 9 5 MLG0603Q39N 38.8 43.3 248.9 14 15 3 MLG0603Q43N 43 48.6 345.5 14 15 1 MLG0603Q47N 47.2 53.8 14 14 1 MLG0603Q51N 51.6 60 13 13 MLG0603Q56N 58.1 70.9 13 13 MLG0603Q62N 64.8 81.5 13 12 MLG0603Q68N 71.8 91.8 13 12 MLG0603Q75N 80.4 107.5 13 11 MLG0603Q82N 89.1 123.8 12 10 MLG0603Q91N 101.9 156.4 11 9 MLG0603QR10 115.1 192.3 11 8 2.4GHz Inductance, Q: HP4291A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents TDK-EPC CORPORATION 16 MLG Series / Data sheets MLG1005S Inductance (nH) Part No. MLG1005S0N3 T 0.3 MLG1005S0N4 T 0.4 MLG1005S0N5 T 0.5 MLG1005S0N6 T 0.6 MLG1005S0N7 T 0.7 MLG1005S0N8 T 0.8 MLG1005S0N9 T 0.9 MLG1005S1N0 T 1.0 MLG1005S1N1 T 1.1 MLG1005S1N2 T 1.2 MLG1005S1N3 T 1.3 MLG1005S1N5 T 1.5 MLG1005S1N6 T 1.6 MLG1005S1N8 T 1.8 MLG1005S2N0 T 2.0 MLG1005S2N2 T 2.2 MLG1005S2N4 T 2.4 MLG1005S2N7 T 2.7 MLG1005S3N0 T 3.0 MLG1005S3N3 T 3.3 MLG1005S3N6 T 3.6 MLG1005S3N9 T 3.9 MLG1005S4N3 T 4.3 MLG1005S4N7 T 4.7 MLG1005S5N1 T 5.1 MLG1005S5N6 T 5.6 MLG1005S6N2 T 6.2 MLG1005S6N8 T 6.8 MLG1005S7N5 T 7.5 MLG1005S8N2 T 8.2 MLG1005S9N1 T 9.1 MLG1005S10N T 10 MLG1005S11N T 11 MLG1005S12N T 12 MLG1005S13N T 13 MLG1005S15N T 15 MLG1005S16N T 16 MLG1005S18N T 18 Inductance tolerance (%) Q min. Inductance, Q test frequency (MHz) Self-resonance frequency (GHz) DC resistance ( ) min. typ. max. typ. + - 0.1, + - 0.1, + - 0.2nH + - 0.2nH - 100 10 20 up 0.1 0.01 1000 - 100 10 20 up 0.1 0.01 1000 + - 0.1, + - 0.1, + - 0.2nH + - 0.2nH - 100 10 20 up 0.1 0.01 1000 - 100 10 20 up 0.1 0.01 1000 + - 0.1, + - 0.2nH + + - 0.1, - 0.2nH + - 0.1, + - 0.2nH - 100 10 18.7 0.1 0.02 1000 - 100 10 16.4 0.1 0.02 1000 - 100 10 17.7 0.1 0.04 1000 + - 0.1, + - 0.2, + - 0.1, + - 0.2, + + 0.1, - 0.2, + - 0.3nH + - 0.3nH 7 100 10 13.8 0.1 0.04 1000 7 100 10 19.3 0.1 0.03 1000 + - 0.3nH + + + - 0.1, - 0.2, - 0.3nH 7 100 10 11.6 0.1 0.04 1000 7 100 8 11.7 0.1 0.04 1000 + - 0.1, + - 0.1, + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 7 100 8 9.6 0.1 0.06 1000 7 100 7.5 9.4 0.12 0.05 1000 + - 0.1, + - 0.1, + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 7 100 8 10.3 0.15 0.06 900 7 100 7.5 9.3 0.15 0.07 900 + - 0.1, + - 0.2, + - 0.3nH + + + 0.1, 0.2, - 0.3nH + - 0.1, + - 0.2, + - 0.3nH 7 100 7 8.6 0.15 0.08 900 7 100 7 8.2 0.15 0.08 800 7 100 6 7.3 0.15 0.08 800 + - 0.1, + - 0.1, + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 7 100 5.5 6.8 0.2 0.09 800 8 100 5 6.1 0.2 0.09 800 + - 0.1, + - 0.1, + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 8 100 5 6.7 0.2 0.09 700 8 100 5 6.5 0.2 0.11 700 + - 0.2, + - 0.2, + - 0.3nH + - 0.3nH 8 100 4.5 6 0.2 0.11 700 8 100 4.5 5.4 0.25 0.12 700 + - 0.2, + - 0.3nH + + 0.2, - 0.3nH + - 3%, + - 0.3nH 8 100 4 5 0.25 0.13 600 8 100 4 5.3 0.25 0.14 600 8 100 4 4.7 0.25 0.16 600 + - 3%, + - 3%, + - 5% + - 5% 8 100 3.5 4.4 0.25 0.15 600 8 100 3 4.1 0.25 0.15 500 + - 3%, + - 3%, + - 5% + - 5% 8 100 3 4 0.3 0.19 500 8 100 3 3.8 0.3 0.2 500 + - 3%, + - 3%, + - 5% + - 5% 8 100 2.5 3.4 0.35 0.22 500 8 100 2.5 3.5 0.4 0.28 400 + - 3%, + - 5% + + 3%, - 5% + - 3%, + - 5% 8 100 2.5 3 0.4 0.25 400 8 100 2.4 2.9 0.5 0.26 400 8 100 2.2 2.8 0.55 0.35 400 + - 3%, + - 3%, 8 100 2.1 2.7 0.55 0.32 400 8 100 2 2.5 0.6 0.4 350 + - 5% + - 5% " " in the part numbers shows inductance tolerance symbols (B: + - 0.1nH/C: + - 0.2nH/S: + - 0.3nH/H: + -3%/J: + - 5%) Rated current :The value where the temperature of the inductor increases by 20C is applied. Measuring Instruments Inductance, Q: HPE4991A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents Self-resonance frequency : HP8720C Network analyzer or equivalents DC resistance : YOKOGAWA TYPE7561 or equivalents 17 Rated current (mA) max. TDK-EPC CORPORATION Multilayer Chip Inductors For High-frequency Circuits And Modules MLG Series / Data sheets MLG Series 0402S Type MLG1005S Inductance (nH) Part No. MLG1005S20N T 20 MLG1005S22N T 22 MLG1005S24N T 24 MLG1005S27N T 27 MLG1005S30N T 30 MLG1005S33N T 33 MLG1005S36N T 36 MLG1005S39N T 39 MLG1005S43N T 43 MLG1005S47N T 47 MLG1005S51N T 51 MLG1005S56N T 56 MLG1005S62N T 62 MLG1005S68N T 68 MLG1005S75N T 75 MLG1005S82N T 82 MLG1005S91N T 91 MLG1005SR10 T 100 MLG1005SR11 T 110 MLG1005SR12 T 120 MLG1005SR13 T 130 MLG1005SR15 T 150 MLG1005SR16 T 160 MLG1005SR18 T 180 MLG1005SR20 T 200 MLG1005SR22 T 220 MLG1005SR24 T 240 MLG1005SR27 T 270 MLG1005SR30 T 300 MLG1005SR33 T 330 MLG1005SR36 T 360 MLG1005SR39 T 390 Inductance tolerance (%) Q min. Inductance, Q test frequency (MHz) Self-resonance frequency (GHz) DC resistance ( ) Rated current (mA) max. min. typ. max. typ. + - 3%, + - 3%, + - 5% + - 5% 8 100 1.9 2.4 0.6 0.38 350 8 100 1.7 2.2 0.7 0.46 350 + - 3%, + - 3%, + - 5% + - 5% 8 100 1.7 2.1 0.7 0.43 350 8 100 1.6 2 0.8 0.53 300 + - 3%, + - 5% + + - 3%, - 5% + - 3%, + - 5% 8 100 1.5 1.9 0.8 0.5 300 8 100 1.4 1.8 0.9 0.59 300 8 100 1.3 1.7 1 0.62 250 + - 3%, + - 5% + - 3%, + - 5% + + 3%, - 5% 8 100 1.2 1.6 1 0.65 250 8 100 1.2 1.6 1.1 0.67 250 8 100 1.1 1.4 1.2 0.75 250 + - 3%, + - 3%, + - 5% + - 5% 8 100 1.1 1.5 1.2 0.72 250 8 100 1 1.3 1.3 0.83 200 + - 3%, + - 3%, + - 5% + - 5% 8 100 1 1.3 1.4 0.85 200 8 100 0.8 1.1 1.5 0.87 200 + - 3%, + - 5% + - 3%, + - 5% 8 100 0.75 1.1 1.5 0.93 200 8 100 0.7 1 1.6 1.01 200 + - 3%, + - 5% + - 3%, + - 5% + + 3%, - 5% 8 100 0.7 0.9 1.8 1.14 200 8 100 0.7 0.9 2 1.37 200 8 100 0.7 0.93 2.2 1.48 150 + - 3%, + - 3%, + - 5% + - 5% 8 100 0.6 0.8 2.2 1.48 150 8 100 0.6 0.76 2.5 1.68 150 + - 3%, + - 3%, + - 5% + - 5% 8 100 0.55 0.7 3.5 2.44 150 8 100 0.5 0.62 3.8 2.74 150 + - 3%, + - 5% + - 3%, + - 5% 8 100 0.5 0.6 3.8 2.88 150 8 100 0.42 0.52 4.2 3.15 100 + - 3%, + - 5% + - 3%, + - 5% + + 3%, - 5% 8 100 0.45 0.5 4.2 3.02 100 8 100 0.4 0.48 4.8 3.42 100 8 100 0.4 0.5 4.8 3.54 100 + - 3%, + - 3%, + - 5% + - 5% 6 100 0.35 0.44 6.5 4.82 50 6 100 0.35 0.4 7 5.21 50 + - 3%, + - 3%, + - 5% + - 5% 6 100 0.3 0.4 7.5 5.39 50 6 100 0.3 0.4 8 5.97 50 1+ - 0.05 0.5 + - 0.05 " " in the part numbers shows inductance tolerance symbols (B: + - 0.1nH/C: + - 0.2nH/S: + - 0.3nH/H: + -3%/J: + - 5%) Rated current :The value where the temperature of the inductor increases by 20C is applied. Measuring Instruments Inductance, Q: HPE4991A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents Self-resonance frequency : HP8720C Network analyzer or equivalents DC resistance : YOKOGAWA TYPE7561 or equivalents 0.5 + - 0.05 0.25 + - 0.1 TDK-EPC CORPORATION Weight : 1mg typ. Dimensions in mm 18 MLG Series / Data sheets MLG1005S Part No. Inductance(nH) typ. 500MHz 800MHz 1.8GH 2GH 2.4GHz Q typ. 500MHz 800MHz 1.8GH 2GH MLG1005S0N3 0.3 0.3 0.3 0.3 0.3 39 48 99 117 127 MLG1005S0N4 0.4 0.4 0.4 0.4 0.4 41 48 98 109 117 MLG1005S0N5 0.5 0.5 0.5 0.5 0.5 26 32 58 63 69 MLG1005S0N6 0.6 0.6 0.6 0.6 0.6 22 27 46 49 53 MLG1005S0N7 0.7 0.7 0.7 0.7 0.7 22 28 45 49 54 MLG1005S0N8 0.8 0.8 0.8 0.8 0.8 26 34 57 60 66 MLG1005S0N9 0.9 0.8 0.8 0.8 0.8 21 27 44 47 53 MLG1005S1N0 0.9 0.9 0.9 0.9 0.9 22 29 48 50 56 MLG1005S1N1 1 1 1 1 1 23 29 47 50 57 MLG1005S1N2 1.1 1.1 1.1 1.1 1.1 23 29 48 50 56 MLG1005S1N3 1.2 1.2 1.2 1.2 1.2 22 27 44 47 53 MLG1005S1N5 1.4 1.4 1.4 1.5 1.5 23 29 47 50 56 MLG1005S1N6 1.5 1.5 1.5 1.6 1.6 23 29 46 49 54 MLG1005S1N8 1.7 1.7 1.7 1.7 1.7 20 26 41 43 49 MLG1005S2N0 1.9 1.9 1.9 1.9 1.9 21 25 41 43 48 MLG1005S2N2 2.1 2.1 2.1 2.1 2.2 22 27 44 47 52 MLG1005S2N4 2.3 2.3 2.3 2.3 2.4 21 26 42 44 49 MLG1005S2N7 2.6 2.6 2.6 2.7 2.7 22 27 43 45 50 MLG1005S3N0 2.9 2.9 3 3 3.1 24 29 47 49 54 MLG1005S3N3 3.2 3.2 3.3 3.4 3.5 24 30 46 48 53 MLG1005S3N6 3.4 3.4 3.6 3.6 3.8 21 26 40 42 46 MLG1005S3N9 3.7 3.7 3.9 3.9 4.1 22 28 43 45 50 MLG1005S4N3 4.1 4.1 4.3 4.4 4.6 24 30 47 49 53 MLG1005S4N7 4.5 4.5 4.8 4.9 5.2 23 30 45 47 50 MLG1005S5N1 4.9 4.9 5.4 5.6 6.1 23 29 42 43 44 MLG1005S5N6 5.4 5.4 5.8 5.9 6.3 22 28 42 43 45 MLG1005S6N2 6 6 6.8 7.1 7.8 24 29 42 43 43 MLG1005S6N8 6.5 6.6 7.4 7.8 8.6 23 28 40 41 41 MLG1005S7N5 7.2 7.4 8.6 9.2 10.5 24 30 41 41 39 MLG1005S8N2 7.9 8 9.3 9.9 11.3 23 28 38 38 36 MLG1005S9N1 8.8 9 10.8 11.6 13.7 24 30 40 39 36 MLG1005S10N 9.7 9.9 12.4 13.5 16.7 24 30 37 36 31 MLG1005S11N 10.6 10.9 13.8 15.1 19 23 28 34 33 28 MLG1005S12N 11.7 12.1 16.2 18.3 25.5 23 29 33 31 23 MLG1005S13N 12.6 13 18.3 21.3 32.4 20 24 25 22 15 MLG1005S15N 14.7 15.3 22 26 41.7 23 28 29 26 17 MLG1005S16N 15.6 16.2 24.1 29 50.2 22 26 26 22 13 MLG1005S18N 17.7 18.6 29 36.1 74.4 23 28 26 22 11 Inductance, Q: HP E4991A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents 19 TDK-EPC CORPORATION 2.4GHz Multilayer Chip Inductors For High-frequency Circuits And Modules MLG Series / Data sheets MLG Series 0402S Type MLG1005S Part No. Inductance(nH) typ. 500MHz 800MHz 1.8GH 2GH 2.4GHz Q typ. 500MHz 800MHz 1.8GH 2GH MLG1005S20N 19.7 20.8 36.8 50.3 215.3 21 25 21 16 4 MLG1005S22N 21.8 23.3 44.5 65.1 341.5 22 27 21 14 2 MLG1005S24N 23.8 25.5 53.8 86.9 22 26 17 11 3 MLG1005S27N 27 29.6 92.4 317.8 20 23 10 3 MLG1005S30N 30.1 33.5 150.1 19 21 6 1 MLG1005S33N 33.5 37.8 314.7 20 23 3 MLG1005S36N 36.7 41.5 21 23 2 MLG1005S39N 40.3 46.9 20 21 MLG1005S43N 44.3 51.6 20 21 MLG1005S47N 50.2 63.2 19 20 MLG1005S51N 53.7 65.6 19 19 MLG1005S56N 60.9 80.2 19 18 MLG1005S62N 67.5 89.8 18 16 MLG1005S68N 75.8 107.5 17 15 MLG1005S75N 86.5 135.2 17 13 MLG1005S82N 96.9 164.8 16 11 MLG1005S91N 111 217.9 15 9 MLG1005SR10 128.9 325.8 14 6 MLG1005SR11 140.8 343.1 15 7 MLG1005SR12 175.2 12 1 MLG1005SR13 187.8 13 2 MLG1005SR15 284.7 11 MLG1005SR16 356.9 9 MLG1005SR18 422.4 8 MLG1005SR20 4 MLG1005SR22 5 MLG1005SR24 1 2.4GHz MLG1005SR27 MLG1005SR30 MLG1005SR33 MLG1005SR36 MLG1005SR39 Inductance, Q: HP E4991A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents TDK-EPC CORPORATION 20 MLG Series / Data sheets MLG1608 Part No. Inductance (nH) MLG1608B1N0ST 1 MLG1608B1N2ST 1.2 MLG1608B1N5ST 1.5 MLG1608B1N8ST 1.8 MLG1608B2N2ST 2.2 MLG1608B2N7ST 2.7 MLG1608B3N3ST 3.3 MLG1608B3N9ST 3.9 MLG1608B4N7ST 4.7 MLG1608B5N6DT 5.6 MLG1608B6N8DT 6.8 MLG1608B8N2DT 8.2 MLG1608B10NJT 10 MLG1608B12NJT 12 MLG1608B15NJT 15 MLG1608B18NJT 18 MLG1608B22NJT 22 MLG1608B27NJT 27 MLG1608B33NJT 33 MLG1608B39NJT 39 MLG1608B47NJT 47 MLG1608B56NJT 56 MLG1608B68NJT 68 MLG1608B82NJT 82 MLG1608BR10JT 100 MLG1608SR12JT 120 MLG1608SR15JT 150 MLG1608SR18JT 180 MLG1608SR22JT 220 MLG1608SR27JT 270 MLG1608SR33JT 330 MLG1608SR39JT 390 Q min. Inductance, Q test frequency (MHz) Self-resonance frequency (GHz) DC resistance ( ) min. typ. max. typ. + - 0.3nH + - 0.3nH 8 100 10 20 up 0.1 0.03 600 8 100 10 20 up 0.1 0.04 600 + - 0.3nH + - 0.3nH 8 100 10 19.6 0.1 0.03 600 8 100 10 16.6 0.1 0.04 600 + - 0.3nH + - 0.3nH 10 100 8 10.8 0.1 0.05 600 10 100 7 8.8 0.12 0.06 600 + - 0.3nH + - 0.3nH 10 100 6.5 8.8 0.12 0.06 600 10 100 6 7.9 0.14 0.06 600 + - 0.3nH + - 0.5nH 10 100 5 6.8 0.15 0.08 600 10 100 5 6.8 0.16 0.08 600 + - 0.5nH + - 0.5nH 10 100 4.5 5.7 0.18 0.1 600 10 100 4.5 5.6 0.2 0.1 600 + - 5% + - 5% 12 100 3.5 4.5 0.2 0.11 600 12 100 3 3.8 0.25 0.13 600 + - 5% + - 5% 12 100 2.8 3.6 0.28 0.14 600 12 100 2.6 3.3 0.32 0.16 600 + - 5% + - 5% 12 100 2.3 3 0.35 0.19 500 12 100 2 2.7 0.4 0.21 500 + - 5% + - 5% 12 100 1.8 2.3 0.5 0.25 500 12 100 1.6 2 0.55 0.26 400 + - 5% + - 5% 14 100 1.4 1.8 0.6 0.35 400 14 100 1.2 1.8 0.7 0.41 400 + - 5% + - 5% 14 100 1.1 1.6 0.75 0.43 300 14 100 1 1.4 0.8 0.5 300 + - 5% + - 5% 14 100 0.8 1.2 1 0.64 300 14 100 0.65 0.8 1.2 0.89 300 + - 5% + - 5% 14 100 0.55 0.7 1.3 1.03 250 14 100 0.5 0.6 1.4 1.08 250 + - 5% + - 5% 14 100 0.45 0.6 1.7 1.29 200 14 100 0.35 0.5 2 1.59 200 + - 5% + - 5% 10 50 0.35 0.47 2.8 1.9 100 10 50 0.3 0.43 3 2.06 100 + - 5% + - 5% 10 50 0.25 0.39 3.5 2.47 100 10 50 0.25 0.36 4.5 3.2 70 10 50 0.2 0.31 5.5 3.88 70 10 50 0.15 0.22 5.5 3.76 70 10 50 0.13 0.19 5.5 4.27 70 Inductance tolerance* (%) MLG1608SR47JT 470 MLG1608SR56JT 560 MLG1608SR68JT 680 MLG1608SR82JT 820 + - 5% + - 5% MLG1608S1R0JT 1000 + - 5% *Smaller inductance tolerances than those shown here are also available. Please contact us for details. Rated current :The value where the temperature of the inductor increases by 20C is applied. Measuring Instruments Inductance, Q: HP4291A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents Self-resonance frequency : HP8720C Network analyzer or equivalents DC resistance : YOKOGAWA TYPE7561 or equivalents 21 TDK-EPC CORPORATION Rated current (mA) max. Multilayer Chip Inductors For High-frequency Circuits And Modules MLG Series / Data sheets MLG Series 0402S Type MLG1608 Part No. Inductance(nH) typ. 500MHz 800MHz 1.8GH 2GH 2.4GHz Q typ. 500MHz 800MHz 1.8GH 2GH MLG1608B1N0ST 1 1 1 1 1 39 48 77 82 95 MLG1608B1N2ST 1.2 1.1 1.2 1.2 1.2 28 35 57 60 68 MLG1608B1N5ST 1.5 1.5 1.5 1.5 1.5 37 48 78 81 93 MLG1608B1N8ST 1.8 1.8 1.8 1.8 1.8 38 48 77 81 95 MLG1608B2N2ST 2.2 2.1 2.2 2.2 2.2 44 54 88 91 107 MLG1608B2N7ST 2.6 2.6 2.7 2.7 2.8 40 51 79 81 94 MLG1608B3N3ST 3.2 3.2 3.3 3.3 3.4 38 48 76 79 91 MLG1608B3N9ST 3.8 3.8 4 4 4.1 40 50 79 81 93 MLG1608B4N7ST 4.6 4.6 4.9 5 5.2 41 51 76 79 88 MLG1608B5N6DT 5.4 5.5 5.8 5.9 6.2 37 46 69 71 79 MLG1608B6N8DT 6.6 6.7 7.3 7.5 8 38 47 67 68 74 MLG1608B8N2DT 8 8.1 8.9 9.3 10 39 48 67 68 71 MLG1608B10NJT 9.8 10 11.5 12.1 13.6 38 47 63 63 61 MLG1608B12NJT 11.8 12.1 14.8 16 19.3 39 48 59 57 51 MLG1608B15NJT 14.8 15.4 20.6 23.4 32.2 38 46 49 46 34 MLG1608B18NJT 17.8 18.5 25.5 29.3 42.2 36 44 47 42 30 MLG1608B22NJT 21.9 22.9 33.6 40.2 66.8 36 44 43 38 23 MLG1608B27NJT 27.1 28.8 50.6 68.5 277.8 37 43 34 26 7 MLG1608B33NJT 33.4 36 76.7 125.1 37 43 27 17 MLG1608B39NJT 40.2 45 209.9 36 40 11 MLG1608B47NJT 49.1 56 38 41 3 MLG1608B56NJT 59.6 71.1 37 38 MLG1608B68NJT 74 92.8 34 33 MLG1608B82NJT 91.1 120.6 33 31 MLG1608BR10JT 118 182 35 28 MLG1608SR12JT 188 23 MLG1608SR15JT 283 19 MLG1608SR18JT 455 14 MLG1608SR22JT 771 9 MLG1608SR27JT 2.4GHz 3 Inductance, Q: HP4291A Impedance/gain-phase analyzer or equivalents / 16197A Test fixture or equivalents 0.8 + - 0.15 1.6 + - 0.15 0.8 + - 0.15 0.3 + - 0.2 Weight : 4mg typ. Dimensions in mm TDK-EPC CORPORATION E05EC2 2010.05.21 22