XS ON 6 IP4221CZ6-S ESD protection for high-speed interfaces Rev. 2 -- 13 December 2012 Product data sheet 1. Product profile 1.1 General description The device is designed to protect high-speed interfaces such as USB 2.0, Ethernet and Digital Visual Interface (DVI) against ElectroStatic Discharge (ESD). The device includes four high-level ESD protection diode structures for high-speed signal lines and is encapsulated in a leadless ultra small DFN1410-6 (SOT886) plastic package. Special diode configuration protects all signal lines and offers ultra low line capacitance of only 1 pF. The rail-to-rail diodes are connected to the Zener diode which allows ESD protection to be independent of supply voltage. 1.2 Features and benefits System ESD protection for high-speed data lines such as USB 2.0, Ethernet and DVI All signal lines with integrated rail-to-rail clamping diodes for downstream ESD protection of 8 kV according to IEC 61000-4-2, level 4 Line capacitance of only 1 pF for each channel Leadless ultra small DFN1410-6 package: 1 1.45 0.5 mm; pitch 0.5 mm 1.3 Applications The device is designed for high-speed receiver and transmitter port protection: Mobile phones, smartphones and handsets TVs and monitors DVD recorders and players Notebooks, mother boards, graphic cards and ports Set-top boxes and game consoles IP4221CZ6-S NXP Semiconductors ESD protection for high-speed interfaces 2. Pinning information Table 1. Pinning Pin Symbol Description Simplified outline 1 I/O 1 ESD protection 2 GND ground 3 I/O 2 ESD protection 4 I/O 3 ESD protection 5 VCC supply voltage 6 I/O 4 ESD protection 6 1 5 Graphic symbol 4 6 5 4 1 2 3 2 3 Transparent top view 001aag273 3. Ordering information Table 2. Ordering information Type number IP4221CZ6-S Package Name Description Version DFN1410-6 plastic extremely thin small outline package; no leads; 6 terminals; body 1 1.45 0.5 mm SOT886 4. Marking Table 3. Marking codes Type number Marking code IP4221CZ6-S 1S 5. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VI input voltage VESD electrostatic discharge voltage Tstg Tamb [1] IP4221CZ6-S Product data sheet Conditions Min Max Unit 0.5 +5.5 V 8 +8 kV storage temperature 55 +125 C ambient temperature 40 +85 C IEC 61000-4-2, level 4; contact discharge [1] All pins to ground. All information provided in this document is subject to legal disclaimers. Rev. 2 -- 13 December 2012 (c) NXP B.V. 2012. All rights reserved. 2 of 12 IP4221CZ6-S NXP Semiconductors ESD protection for high-speed interfaces 6. Characteristics Table 5. Characteristics Tamb = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit - 1 1.2 pF C(I/O-GND) input/output to ground capacitance VI = 0 V; f = 1 MHz; VCC = 3 V [1][2] IRM reverse leakage current VI = 3 V [3][2] - - 100 nA [4] 6 - 9 V - 0.7 - V VBRzd Zener diode breakdown voltage II = 1 mA VF forward voltage Itest = 10 mA [1] This parameter is guaranteed by design. [2] Pins 1, 3, 4 and 6 are measured to ground. [3] All pins measured to ground (pin 2). [4] Measured from pin 5 to pin 2. 7. Application information 7.1 USB 1.1 and 2.0 protection VBUS DAT+ DAT+ USB DAT- PORT GND DAT- USB 2.0/ IEEE 1394 CONTROLLER 1 6 2 5 3 4 VBUS DAT+ DAT- DAT+ USB DAT- PORT GND 001aah371 Each device is capable to protect USB data lines and VBUS supply. Fig 1. IP4221CZ6-S Product data sheet Typical application for USB ESD protection All information provided in this document is subject to legal disclaimers. Rev. 2 -- 13 December 2012 (c) NXP B.V. 2012. All rights reserved. 3 of 12 IP4221CZ6-S NXP Semiconductors ESD protection for high-speed interfaces 7.2 USB On-The-GO (OTG) protection VBUS DAT+ DAT- to phone USB OTG RECEPTACLE CARKIT ID GND Shld GND mini B receptacle mini A receptacle 1 6 2 5 3 4 001aag051 The device is capable to protect USB data lines, VBUS supply and ID pin. Fig 2. Typical application for USB OTG ESD protection 7.3 Universal SIM card protection I/O CLOCK RESET SIM VCC GND 1 6 2 5 3 4 001aag052 The device also protects VCC. Fig 3. IP4221CZ6-S Product data sheet Typical application for universal SIM card ESD protection All information provided in this document is subject to legal disclaimers. Rev. 2 -- 13 December 2012 (c) NXP B.V. 2012. All rights reserved. 4 of 12 IP4221CZ6-S NXP Semiconductors ESD protection for high-speed interfaces 7.4 IEEE 1394a/b protection TPBIAS Shld1 1 F PWR BUS PWR 56 1 56 TPA+ TPA+ TPA- TPA- IEEE 1394 PHYSICAL LAYER 7 6 5 6 1 1394 CONNECTOR 2 5 3 4 TPB+ TPB+ TPB- TPB- GND 56 56 Shld2 220 pF 5 k 1 nF 10 nF 4 3 2 8 1 M 001aag050 Fig 4. IP4221CZ6-S Product data sheet Typical application for IEEE 1394a/b ESD protection All information provided in this document is subject to legal disclaimers. Rev. 2 -- 13 December 2012 (c) NXP B.V. 2012. All rights reserved. 5 of 12 IP4221CZ6-S NXP Semiconductors ESD protection for high-speed interfaces 7.5 Gigabit Ethernet transceiver protection TPOPA R1 C1 C5 C2 C6 TPONA 1 6 2 5 3 4 TPOPB R2 TPONB GIGABIT ETHERNET TPOPC TRANSCEIVER QUAD TRANSFORMER R3 RJ45 C3 C7 C4 C8 TPONC 1 6 2 5 3 4 TPOPD R4 TPOND 001aag053 Fig 5. IP4221CZ6-S Product data sheet Typical application for gigabit Ethernet transceiver ESD protection All information provided in this document is subject to legal disclaimers. Rev. 2 -- 13 December 2012 (c) NXP B.V. 2012. All rights reserved. 6 of 12 IP4221CZ6-S NXP Semiconductors ESD protection for high-speed interfaces 7.6 Universal microSD/TransFlash and SD memory card protection DAT0 DAT1 DAT2 DAT3/CD TRANSFLASH CMD CLK VCC GND 1 6 1 6 2 5 2 5 3 4 3 4 001aag054 Fig 6. Typical application for universal microSD/TransFlash and SD memory card ESD protection 8. Package outline 0.50 max 1.05 0.95 0.04 max 0.6 3 4 2 5 1 6 0.40 0.32 0.35 0.27 0.25 0.17 0.5 1.5 1.4 0.5 Dimensions in mm Fig 7. IP4221CZ6-S Product data sheet 04-07-22 Package outline DFN1410-6 (SOT886) All information provided in this document is subject to legal disclaimers. Rev. 2 -- 13 December 2012 (c) NXP B.V. 2012. All rights reserved. 7 of 12 IP4221CZ6-S NXP Semiconductors ESD protection for high-speed interfaces 9. Packing information Table 6. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package Description Packing quantity 5000 IP4221CZ6-S DFN1410-6 4 mm pitch, 8 mm tape and reel; T1 (SOT886) 4 mm pitch, 8 mm tape and reel; T4 [2] -115 [3] -132 [1] For further information and the availability of packing methods, see Section 13. [2] T1: normal taping [3] T4: reverse taping 10. Soldering 1.250 0.675 0.370 (6x) 0.500 1.700 solder resist 0.500 solder paste = solderland 0.270 (6x) occupied area Dimensions in mm 0.325 (6x) Fig 8. IP4221CZ6-S Product data sheet 0.425 (6x) sot886_fr Reflow soldering footprint DFN1410-6 (SOT886) All information provided in this document is subject to legal disclaimers. Rev. 2 -- 13 December 2012 (c) NXP B.V. 2012. All rights reserved. 8 of 12 IP4221CZ6-S NXP Semiconductors ESD protection for high-speed interfaces 11. Revision history Table 7. Revision history Document ID Release date Data sheet status Change notice Supersedes IP4221CZ6-S v.2 20121213 Product data sheet - IP4221CZ6-S v.1 Modifications: IP4221CZ6-S v.1 IP4221CZ6-S Product data sheet * * * * * * * * * Section 1 "Product profile": updated Section 4 "Marking": added Section 5 "Limiting values": Tamb added Recommended operating conditions: removed Table 5 "Characteristics": updated Section 7 "Application information": updated Section 8 "Package outline": drawing replaced with minimized package outline drawing Section 10 "Soldering": updated Section 12 "Legal information": updated 20080429 Product data sheet - All information provided in this document is subject to legal disclaimers. Rev. 2 -- 13 December 2012 - (c) NXP B.V. 2012. All rights reserved. 9 of 12 IP4221CZ6-S NXP Semiconductors ESD protection for high-speed interfaces 12. Legal information 12.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term `short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 12.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 12.3 Disclaimers Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. IP4221CZ6-S Product data sheet Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). NXP does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. All information provided in this document is subject to legal disclaimers. Rev. 2 -- 13 December 2012 (c) NXP B.V. 2012. All rights reserved. 10 of 12 IP4221CZ6-S NXP Semiconductors ESD protection for high-speed interfaces Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Quick reference data -- The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products -- Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors' warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors' specifications such use shall be solely at customer's own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors' standard warranty and NXP Semiconductors' product specifications. 12.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 13. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com IP4221CZ6-S Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 -- 13 December 2012 (c) NXP B.V. 2012. All rights reserved. 11 of 12 IP4221CZ6-S NXP Semiconductors ESD protection for high-speed interfaces 14. Contents 1 1.1 1.2 1.3 2 3 4 5 6 7 7.1 7.2 7.3 7.4 7.5 7.6 8 9 10 11 12 12.1 12.2 12.3 12.4 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Application information. . . . . . . . . . . . . . . . . . . 3 USB 1.1 and 2.0 protection . . . . . . . . . . . . . . . 3 USB On-The-GO (OTG) protection . . . . . . . . . 4 Universal SIM card protection. . . . . . . . . . . . . . 4 IEEE 1394a/b protection. . . . . . . . . . . . . . . . . . 5 Gigabit Ethernet transceiver protection . . . . . . 6 Universal microSD/TransFlash and SD memory card protection . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7 Packing information . . . . . . . . . . . . . . . . . . . . . 8 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9 Legal information. . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information. . . . . . . . . . . . . . . . . . . . . 11 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) NXP B.V. 2012. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 13 December 2012 Document identifier: IP4221CZ6-S