PCM-9562 Intel(R) Atom N450/D510 EBX SBC with 3LAN/6 COM/3 SATA/8 USB2.0/2 Watchdog Startup Manual Specifications Packing List Before you begin installing your card, please make sure that the following items have been shipped: * * * * * 1 x PCM-9562 A1 SBC 1 x Startup manual 1 x Utility CD 1 x ATX 5VSB CABLE 1 x mini jumper pack Note 2: * CPU: N450/D510 ATOM N450 (Single Core) 1.67 GHz: PCM-9562N-S6A1E ATOM D510 ( Dual Core) 1.67 GHz: PCM-9562D-S6A1E 1700015741 9689000002 If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Note 1: General For detailed contents of PCM-9562, please refer to information on the enclosed CD-ROM (in PDF format). Acrobat Reader is required to view any PDF file.Acrobat Reader can be downloaded at: www.adobe.com/Products/acrobat/readstep2. html (Acrobat is a trademark of Adobe) * 2nd Cache Memory: N450: 512 KB D510: 1 MB * System Chipset: N450/D510 + ICH8M * BIOS: AMI 16Mbit Flash BIOS * System Memory: 1 x 200-pin SODIMM sockets, DDR2 N450 : DDR2 667 MHz D510 : DDR2 800 MHz * * * * Power Management: APM 1.2, ACPI support Watchdog Timer: 255-level interval timer Expansion Interface: PC-104 plus Battery: Lithium 3 V / 196 mA I/O * I/O Interface: 1 x CF, 3 x SATA 2.5, 1 x K/B, 1 x Mouse, 4 x RS232 (One is optional for Medical), 2 x RS232/422/485 (Default RS-422/485, RS-232 by optional), 1 x LPT ( FDD is optional ) * USB: 8 x USB 2.0 compliant Ports * Audio: AC97, Line-in, Line-out, Mic-in, speaker out (R/L) * IrDA: 115kbps (optional by request) shared from COM2 * GPIO: 16-bit General Purpose I/O Ethernet * Chipset: LAN1 : Intel 82567, LAN2 : Intel 82583V, Optional LAN3: Intel 82583V (UL60601 Compliant) * Speed: 10/100/1000 Mbps * Interface: 3 (RJ-45 connector through the cable and LAN3 is optional) * Standard: IEEE 802.3u 100Base-T & IEEE 802.3ab 1000Base-T for 10/100/1000 Mbps For more information on this and other Advantech products, please visit our website at: http://www.advantech.com http://www.advantech.com/epc For technical support and service, please visit our support website at: http://service.advantech.com.tw/eservice/ Display * Controller: N450/D510 * VRAM: Shared Memory Architecture up to 224 MB system memory * VGA: SXGA 1400 x 1050 @ 60 Hz for Atom N450, up to 2048 x 1536 for Atom D510 * LVDS LCD: 1 x 18-bit LVDS * Dual Independent Display: CRT + LVDS This manual is for the PCM-9562 series Rev. A1. Part No. 2006956200 Print in China 1st Edition, Nov. 2009 PCM-9562 Startup Manual Specifications Mechanical and Enviromental * Dimension (mm): 203 mm (L)* 146 mm (W) * Height on Top (mm): Jumpers and Connectors Connectors Label Function PCM-9562N-S6A1E: 15.4 mm (PCI slot) CN1 DDR2 SODIMM Socket PCM-9562D-S6A1E: 25 mm (CPU Cooler) CN2 Audio CD-In Connector CN4 Audio Connector CN5 Power Connecter CN6 Inverter Connecter CN8 VGA Connecter CN9 LVDS Connecter CN10 LAN1 Connecter CN11 LAN1,2 LED Connector CN12 LAN2 Connecter CN13 HDD LED and POWER LED Connecter CN14 LAN3 Connecter CN15 LPT / FDD Connecter CN16 Standby Power Connecter CN17 PC-104/+ Connecter CN18 LAN3 LED Connector CN20 USB1/2 Connecter CN21 USB3/4 Connecter CN22 Reset Bottom Connecter CN23 Power Bottom Connecter CN24 SIR Connecter CN25 PS2 Keyboard/Mouse Connecter CN26 CF TYPEII Connecter CN28 USB5/6 Connecter * * * * * Height on Bottom (mm): 8.5 mm (CF socket) Heatsink Dimension (mm): 50*50*10 mm Weight (g): with Heatsink 800 g Operating Temperature: 0 ~ 60 C (32~140 F) Operating Humidity: 0% ~ 90% Relative Humidity, noncondensing * Storage Temperature: Standard products: 0 ~ 60 C Storage temperature: -20 ~ 70 C * Storage Humidity: Standard products: 0 ~ 60 C Relative humidity: 95% @ 60 C * Power Supply Voltage: ATX: 12 V 10%/ 5 VSB 5% (5 V stand-by power is only for auto power off function) AT: 12 V 10% only * Power Requirement: PCM-9562N-S6A1E - Max (HCT): 13.9 W (1159 mA @ 12 V, 6 mA @ 5 VSB ) - Typical (XP): 10.8 W (893 mA @ 12 V, 8 mA @ 5 VSB ) PCM-9562D-S6A1E - Max (HCT): 16.9 W (1404 mA @ 12 V, 8 mA @ 5 VSB ) - Typical (XP): 13.6 W (1130 mA @ 12 V, 10 mA @ 5 VSB ) Jumpers and Connectors The board has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the jumpers an connectors. Jumpers CN29 USB7/8 Connecter Label Function CN30 Mini PCIE Slot JP1 LCD Panel Power Select CN31 Mini PCIE Lock JP2 VIO Select for PCI and PC104+ Slot CN32 SATA 1 Connector JP3 CMOS Clear CN33 SATA 2 Connector JP4 UART2 Mode Select CN34 SATA 3 Connector JP5 RS422/RS485 Select for COM4 CN35 GPIO1 Connector JP6 RS422/RS485 Select for COM5 CN36 GPIO2 Connector JP7 Mini PCIE Voltage Select CN37 SMBUS Connector CN38 I2C Connector CN39 COM1 Connector CN40 COM2 Connector PCM-9562 Startup Manual Jumpers and Connectors Jumpers and Connectors CN41 COM3 Connector JP4 UART2 Mode Select CN42 COM4/5 (422/485) Connecter Part Number 1653002101 CN43 COM6 Connector Footprint HD_2x1P_79_D CN44 -V5 and -V12 Connecter Description CN45 SPI Flash Socket PIN HEADER 2*1P 180D(M)SQUARE 2.0mm DIP W/O Pb FAN1 System Fan Connector Setting Function FAN2 CPU Fan Connector (1-2) COM2 PCI1 PCI SLOT NL IrDA JP5 RS422 / RS485 Select for COM4 Part Number 1653003101 1653003101 HD_3x1P_79_D Jumper Setting JP1 LCD Panel Power Select Part Number 1653003100 Footprint PH_3x1V_2.54mm Description PIN HEADER 3*1P 180D(M) 2.0mm DIP SQUARE W/O Pb Description PIN HEADER 3*1P 180D(M) 2.54mm DIP WO/Pb Setting Function (1-2)* COM4= RS485 (2-3) COM4= RS422 JP6 RS422 / RS485 Select for COM5 Part Number 1653003101 Footprint HD_3x1P_79_D Setting Function (1-2) +V5 (2-3)* +V3.3 JP2 VIO Select for PCI and PC104+ Slot Part Number 1653003100 Footprint PH3x1P-2.54 Description PIN HEADER 3*1P 180D(M) 2.0mm DIP SQUARE W/O Pb Description PIN HEADER 3*1P 180D(M) 2.54mm DIP WO/Pb Setting Function (1-2)* COM5= RS485 (2-3) COM5= RS422 JP7 Mini PCIE Voltage Select Part Number 1653003100 Footprint HD_3x1P_100_D Setting Function (1-2) +V5 (2-3)* +V3.3 JP3 CMOS Clear Part Number 1653003101 Footprint HD_3x1P_79_D Description PIN HEADER 3*1P 180D(M) 2.54mm DIP WO/Pb Description PIN HEADER 3*1P 180D(M) 2.0mm DIP SQUARE W/O Pb Setting Function (1-2)* +V3.3 (2-3) +V3.3_DUAL Setting Function (1-2)* Normal (2-3) Clear PCM-9562 Startup Manual PCM-9562 Jumpers and Connectors PCM-9562 Jumper & Connectors (Component Side) PCM-9562 Jumper & Connectors (Solder Side) PCM-9562 Startup Manual 193.04 [7.600] 144.78 [5.700] 78.74 [3.100] 71.12 [2.800] 5.08 [0.200] 0.00 [0.000] 36.20 [1.425] PCM-9562 Dimension 140.97 [5.550] 138.44 [5.450] 135.89 [5.350] 135.89 [5.350] 88.26 [3.475] 82.25 [3.238] 72.48 [2.854] 31.48 [1.239] 2.54 [0.100] 0.00 [0.000] 5.08 [0.200] 193.04 [7.600] 147.32 [5.800] 152.40 [6.000] 62.23 [2.450] 67.31 [2.650] 68.58 [2.700] 41.25 [1.624] 5.08 [0.200] 0.00 [0.000] 0.25 [0.010] 2.54 [0.100] 0.00 [0.000] 2.54 [0.100] 0.00 [0.000] 113.66 [4.475] 193.04 [7.600] PCM-9562 Dimension (Top) 140.97 [5.550] 135.89 [5.350] 135.89 [5.350] 121.78 [4.794] 39.05 [1.537] 16.75 [0.659] 0.00 [0.000] 5.08 [0.200] 48.87 [1.924] 119.07 [4.688] 0.00 [0.000] 5.08 [0.200] 198.12 [7.800] 193.04 [7.600] 0.00 [0.000] 5.08 [0.200] PCM-9562 Dimension (Bottom) PCM-9562 Startup Manual