ES25E 20~25W AC-DC Single Output Wall-mounted type series Features : Universal AC input / Full range 2 pole EURO plug Class power (without earth pin) Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case PWM 3842 control circuit and regulated LED indicator for power on 1 year warranty SPECIFICATION ORDER NO. ES25E05-P1J ES25E07-P1J ES25E09-P1J ES25E12-P1J ES25E15-P1J ES25E18-P1J ES25E24-P1J ES25E28-P1J ES25E36-P1J ES25E48-P1J SAFETY MODEL NO. OUTPUT ES25E05-050 ES25E07-075 ES25E09-090 ES25E12-120 ES25E15-150 ES25E18-180 ES25E24-240 ES25E30-280 ES25E36-360 ES25E48-480 7.5V 9V 12V 15V 18V 24V 28V 36V 48V RATED CURRENT 4.0A 2.93A 2.77A 2.08A 1.66A 1.38A 1.04A 0.89A 0.69A 0.52A CURRENT RANGE 0.4 ~ 4.0A 0.3 ~ 2.93A 0.2 ~ 2.77A 0.1 ~ 2.08A 0.1 ~ 1.66A 0.1 ~ 1.38A 0.1 ~ 1.04A 0.1 ~ 0.89A 0.06 ~ 0.69A 0.05 ~ 0.52A RATED POWER (max.) 20W 22W 25W 25W 25W 25W 25W 25W 25W 25W 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p 240mVp-p DC VOLTAGE Note.2 5V RIPPLE & NOISE (max.) Note.3 50mVp-p VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% SETUP, RISE, HOLD UP TIME 600ms, 50ms, 16ms at full load 90 ~ 264VAC 135 ~ 370VDC VOLTAGE RANGE FREQUENCY RANGE INPUT 47 ~ 63Hz EFFICIENCY (Typ.) 70% AC CURRENT INRUSH CURRENT (max.) 0.7A / 100VAC LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 72% 76% 76% 78% 80% 82% 82% 82% 82% 40A / 230VAC 0.25mA / 240VAC 130 ~ 180% rated output power 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Shut down o/p voltage, re-power on to recover 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes -----I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION Compliance to EN55022 class B (Note. 7) HARMONIC CURRENT Compliance to EN61000-3-2,3 OTHERS CONNECTOR NOTE EMS IMMUNITY MTBF DIMENSION Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A PACKING PLUG 500Khrs min. MIL-HDBK-217F(25 ) 79*54*33mm (L*W*H) 220g ; 60pcs / 13.5kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested CABLE Standard type UL1185 6ft (with ferrite core) for stock ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name:ES25E-SPEC 2011-03-22 ES25E 20~25W AC-DC Single Output Wall-mounted type Mechanical Specification series Unit:mm 38 UL1185 16AWG 1830 50mm for 5V UL1185 18AWG 1 830 50mm for 7.5 ~ 48V 70 10mm POWER LED C"+" 11 0.5mm ID 2.1 x OD 5.5 NAME PLATE Plug Assignment 33 79 Standard plug: P1J (option) 54 P1J OUTPUT + Static Characteristics Derating Curve 100 100 LOAD (%) LOAD (%) P/N CENTER 70 0 10 20 30 Ta ( 38 ) 50 80 60 0 50 60 70 80 90 100 260 INPUT VOLTAGE File Name:ES25E-SPEC 2011-03-22