n Single blow fuse for overcurrent protection
n EIA 2410 (6125 metric) footprint
n Ceramic tube design for fast acting precision fusing speed applications
n UL 248-14 listed
n Surface mount packaging for automated assembly
n RoHS compliant* and halogen free**
Electrical Characteristics
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
Model
Rated
Current
(A)
Fusing Time Resistance
(Ω) Typ.***
Rated
Voltage
Interrupting
Rating
Typical
I2t (A2s)
****
Certications
cUL
E198545
SF-2410FP0062T-2 0.062
Open within
5 sec.
at 200 %
rated current
6.653
125
VAC
50 A @ 125 VAC
50 A @ 125 VDC
300 A @ 32 VDC
0.0012 3
SF-2410FP008T-2 0.08 4.974 0.0017 3
SF-2410FP010T-2 0.1 3.014 0.0043 3
SF-2410FP0125T-2 0.125 2.044 0.0094 3
SF-2410FP016T-2 0.16 0.8655 0.0116 3
SF-2410FP020T-2 0.2 1.8535 0.0517 3
SF-2410FP025T-2 0.25 1.119 0.0528 3
SF-2410FP0315T-2 0.315 0.843 0.1365 3
SF-2410FP0375T-2 0.375 0.732 0.1502 3
SF-2410FP040T-2 0.4 0.4995 0.2149 3
SF-2410FP050T-2 0.5 0.476 0.358 3
SF-2410FP075T-2 0.75 0.2065 0.3761 3
SF-2410FP100T-2 1 0.158 0.4143 3
SF-2410FP150T-2 1.5 0.114 1.0606 3
SF-2410FP200T-2 2 0.0605 1.08 3
SF-2410FP250T-2 2.5 0.044 1.1471 3
SF-2410FP300T-2 3 0.036 1.548 3
SF-2410FP315T-2 3.15 0.033 2.6485 3
SF-2410FP350T-2 3.5 0.029 2.695 3
SF-2410FP400T-2 4 0.021 3.9744 3
SF-2410FP500T-2 5 0.013 6.175 3
SF-2410FP700T-2 7 0.01 9.016 3
SF-2410FP800T-2 8 0.0085 16.758 3
SF-2410FP1000T-2 10 0.006 24.42 3
SinglFuse™ SF-2410FP-T Series Features
*** Resistancevaluemeasuredwith≤10%ratedcurrentat25°Cambient.Tolerance±30%.
**** Melting I2t calculated at 10 times rated current.
*RoHS COMPLIANT
LEAD FREE
*RoHS COMPLIANT
&
**HALOGEN FREE
LEAD FREE
VERSIONS ARE
RoHS COMPLIANT*
* RoHS Directive 2015/863, Mar 31, 2015 and Annex..
** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and
Chlorine (Cl) content is 1500 ppm or less.
“SinglFuse” is a trademark of Bourns, Inc.
Specifications are subject to change without notice. Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
WARNING Cancer and Reproductive Harm
www.P65Warnings.ca.gov
F
3A
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
SinglFuse™ SF-2410FP-T Series Applications
How to Order
SF - 2410 FP 0062 T - 2
SinglFuse™
ProductDesignator
SMDFootprint
2410 = EIA 2410
(6125 metric)
FuseBlowType
FP=FastActingPrecision
Rated Current
0062 ~ 1000 (62 mA ~ 10 A)
StructureType
T=CeramicTube
PackagingType
- 2 = Tape & Reel
Packaging Quantity
1,000 pieces per 7-inch reel
Construction
n Notebooks
n LCD Monitors
n LCD Backlight Inverters
n POE, POE+
n PC Servers
n Power Supplies
n Game Consoles
n White Goods
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
F
3A
CERAMIC TUBE
END CAP
(GOLD-PLATED
BRASS)
Reliability Testing
No. Test Test Condition Requirement Test Reference
1Solderability Temperaturesetup:235±5°C
Timesetup:10±1sec.
Aftertestterminalelectrodewetting
areamustbegreaterthan95% IEC 60068-2-58
2Resistanceto
solderingheat
Temperaturesetup:235±5°C
Timesetup:30±5sec. DCRchange≤±15% IEC 60068-2-58
3Thermalshock
Temperature setup:
25°C~-65°C~25°C~125°C
Timesetup:-65°C(30min)
~25°C(5min)~125°C(30min)
~25°C(5min),5cycles
DCRchange≤±15%
Nomechanicaldamage MIL-STD-202G
Method107G
TestConditionB
4Humidityunload
Heat(85±0.5°C)
HighHumidity(85±1%RH)
240hours
DCRchange≤±15%
Nomechanicaldamage
MIL-STD-202G
Method103B
TestConditionA
5Saltspray
Saltsprayconcentration:5±1%
Testliquidtemperature:35±0.5°C
96hours
DCRchange≤±15%
Nomechanicaldamage
MIL-STD-202G
Method101E
TestConditionA
6 Bending Theboardshallbebentby1mm
atarateof1mm/sec. DCRchange≤±15% IEC 60127-4
7Vibration
Frequencysetup:10~55~10Hz
Timesetup:1Minute/cycle
(X-Y-Z,120cycles,6hours)
DCRchange≤±15%
Nomechanicaldamage MIL-STD-202G
Method201A
Operating Temperature .................................................................................. -55°Cto+125°C
StorageConditions
Temperature .............................................................................................. +15°Cto+30°C
Humidity........................................................................................................... 20%to70%
Shelf Life............................................................................2yearsfrommanufacturingdate
MoistureSensitivityLevel .........................................................................................................1
ESDClassication(HBM)...............................................................................................Class 6
Environmental Characteristics
Typical Part Marking
Representstotalcontent.Layoutmayvary.
3A
F
Product Dimensions Recommended Pad Layout
3A
F
6.10 ± 0.20
(.240 ± .008)
1.45 ± 0.10
(.057 ± .004)
2.15 ± 0.10
(.085 ± .004)
2.60 ± 0.10
(.102 ± .004)
2.60 ± 0.10
(.102 ± .004) 1.96
(.077)
2.95
(.116)
3.15
(.124)
DIMENSIONS: MM
(INCHES) DIMENSIONS: MM
(INCHES)
Rated Current Part Marking Rated Current Part Marking
62 mA 62 mA 1 A 1 A
80 mA 80 mA 1.5 A 1.5 A
100 mA 100 mA 2 A 2 A
125 mA 125 mA 2.5 A 2.5 A
160 mA 160 mA 3 A 3 A
200 mA 200 mA 3.15 A 3.15 A
250 mA 250 mA 3.5 A 3.5 A
315 mA 315 mA 4 A 4 A
375 mA 375 mA 5 A 5 A
400 mA 400 mA 7 A 7 A
500 mA 500 mA 8 A 8 A
750 mA 750 mA 10 A 10 A
3312 - 2 mm SMD Trimming Potentiometer
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Average Pre-Arcing Time vs. Current Curves
62 mA 750 mA
500 mA
400 mA
375 mA
315 mA
250 mA
80 mA
100 mA
125 mA
160 mA
200 mA
100000
10000
1000
100
10
1
0.1
0.01
0.001
PRE-ARCING TIME (SECONDS)
0.01 1010.1
CURRENT (A)
1 A 10 A
8 A
7 A
5 A
4 A
3.5 A
1.5 A
2 A
2.5 A
3 A
3.15 A
100000
10000
1000
100
10
1
0.1
0.01
0.001
PRE-ARCING TIME (SECONDS)
0.1 100101
CURRENT (A)
62 mA 750 mA
500 mA
400 mA
375 mA
315 mA
250 mA
80 mA
100 mA
125 mA
160 mA
200 mA
100000
10000
1000
100
10
1
0.1
0.01
0.001
PRE-ARCING TIME (SECONDS)
0.01 1010.1
CURRENT (A)
1 A 10 A
8 A
7 A
5 A
4 A
3.5 A
1.5 A
2 A
2.5 A
3 A
3.15 A
100000
10000
1000
100
10
1
0.1
0.01
0.001
PRE-ARCING TIME (SECONDS)
0.1 100101
CURRENT (A)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
Average I2t vs. t Curves
10000000
1000000
100000
10000
1000
100
10
1
0.1
I2t (A2s)
0.01 0.1 1 10 100 1000 10000010000
TIME (SECONDS)
10000
1000
100
10
1
0.1
0.01
0.001
0.0001
I2t (A
2
s)
0.01 0.1 1 10 100 1000 10000010000
TIME (SECONDS)
62 mA
80 mA
100 mA
125 mA
160 mA
200 mA
250 mA
315 mA
375 mA
400 mA
500 mA
750 mA
1 A
1.5 A
2 A
2.5 A
3 A
3.15 A
3.5 A
4 A
5 A
7 A
8 A
10 A
10000000
1000000
100000
10000
1000
100
10
1
0.1
I2t (A2s)
0.01 0.1 1 10 100 1000 10000010000
TIME (SECONDS)
10000
1000
100
10
1
0.1
0.01
0.001
0.0001
I2t (A2s)
0.01 0.1 1 10 100 1000 10000010000
TIME (SECONDS)
62 mA
80 mA
100 mA
125 mA
160 mA
200 mA
250 mA
315 mA
375 mA
400 mA
500 mA
750 mA
1 A
1.5 A
2 A
2.5 A
3 A
3.15 A
3.5 A
4 A
5 A
7 A
8 A
10 A
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
Solder Reow Recommendations
Solder Wave Recommendations
Prole Feature Pb-Free Assembly
Preheat/Soak:
Temperature Min. (Tsmin)
Temperature Max. (Tsmax)
Time (ts)from(TsmintoTsmax)
150°C
200°C
60~180seconds
Ramp Up Rate (TLtoTp)3°C/secondmax.
Ramp Up Rate (TsmaxtoTL)5°C/secondmax.
LiquidousTemperature(TL)
Time (tL)maintainedaboveTL
217°C
60~90seconds
PeakPackageBody
Temperature (Tp)235°C±5°C
Timewithin5°Cofactualpeak
temperature (Tp)20~30seconds*
RampDownRate(TptoTL)6°C/secondmax.
Time25°CtoPeakTemperature 8 minutes max.
Donotexceed 240°C
Prole Feature Pb-Free Assembly
Preheat:
Temperature Max. (Tsmax)
Time(Min.toMax.)
150°C
60~90seconds
SolderPotTemperature 260°Cmax.
SolderDwellTime 2~3seconds
Temperature
Time
t 25 °C TO PEAK
TP
TL
T MAX.
S
T MIN.
25 °C
Sts
PREHEAT
tp
RAMP-UP TP
T TO
L
CRITICAL ZONE
RAMP-DOWN
tL
Temperature (°C)
Peak Temperature (Dwell Time)
Time (Sec.)
20 40
PREHEAT TIME
60 80 100 120 140 160 180 200 220 240
COOLING TIME
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
*Toleranceforpeakproletemperature(Tp)isdenedasa
supplier minimum and a user maximum.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
Current Rating Thermal Derating Curve
Pulse Cycle Withstand Capability
120
100
80
60
40
20
0
-60 -40 -20 0 20
25 °C
40 60 80 100 120 140
AMBIENT TEMPERATURE (°C)
DERATING (%)
NUMBER OF PULSES
100,000
10,000
1,000
100
10 % 100 %
PULSE I2t / AVERAGE MELTING I2t
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
REV.03/20
178 ± 1
(7 ± .039)
DIA.
1.50 ± 0.10
(.059 ± .004) DIA.
DIA.
4.00 ± 0.05
(.157 ± .002)
4.00 ± 0.10
(.157 ± .004)
2.00 ± 0.05
(.079 ± .002)
1.75 ± 0.10
(.069 ± .004)
5.50 ± 0.05
(.216 ± .002)
12.00 ± 0.20
(.472 ± .008)
1.50 ± 0.10
(.059 ± .004)
A
B
B
A
60 ± 0.50
(2.362 ± .019)
16 ± 0.5
(.630 ± .020)
2.90 ± 0.10
(.114 ± .004)
SECTION A-A
SECTION B-B
6.50 ± 0.10
(.256 ± .004)
0.25 ± 0.05
(.010 ± .002)
2.80 ± 0.10
(.110 ± .004)
Packaging Specications
DIMENSIONS: MM
(INCHES)
Asia-Pacic: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
afliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specic devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualication (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualication. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identied by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classications outside of the United States.
Bourns expressly identies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identication means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost prots, and (ii) any and all implied warranties, including implied warranties
of tness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplied Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R