1001216 - SCS - Datasheet.Live

Product Data Sheet

3M™ Static Shielding Bag 1000

Product Data Sheet

This transparent metal-in static shielding bag is designed to provide a static safe

environment for sensitive electronic devices. Bags are printed with an ESD warning

symbol and a lot code for traceability. Open top and ZipTop styles are available. The

bags are heat sealable.

3M Static Shielding Bags 1000 are manufactured from a polyester, metal,

polyethylene laminate. The polyester dielectric in concert with the metal layer is

intended to provide shielding of Electrostatic Discharge (ESD) and to help minimize

the penetration of electric ﬁeld.

These bags are tested to meet or exceed certain electrical and physical requirements

of Static Shielding Bags, ANSI/ESD S541, and to be ANSI/ESD S20.20 program

compliant. Bags are RoHS Compliant* and lead-free**.

™

Static Shielding Bag 1000,

Open Top

™

Static Shielding Bag 1000,

ZipTop

Physical Typical Value Testing Method

Tensile Strength

4600 PSI, 32 MPa

ASTM D882

Puncture Resistance

12 lbs, 53 N

MIL-STD-3010C Method 2065

Seal Strength

11 lbs, 48 N

ASTM D882

Thickness

2.8 mils, .071 mm +/-15%

MIL-STD-3010C Method 1003

Marking Adhesion

Pass

IPC-TM-650 2.4.1

Transparency 40% Tobias

Electrical Typical Value Testing Method

ESD Shielding <10 nJ ANSI/ESD STM11.31

Surface Resistance -

Interior

<1x10

ohms

ANSI/ESD STM11.11

Surface Resistance -

Exterior

<1x10

ohms

ANSI/ESD STM11.11

Static Decay

< 2 seconds

ETS 406D

Cleanliness Typical Value Testing Method

Silicone Not Detected FTIR

Heat Sealing Conditions Typical Value

Temperature 300ºF – 375°F, 149ºC – 190°C

Time

0.5 – 3.5 seconds

Pressure

30 – 70 PSI, 206 – 482 KPa

This product is intended for commercial use only. This product is not on the Qualiﬁed

Product Listing under the Defense Standardization Program.

3M™ Static Shielding Bag 1000

Product Data Sheet

• Standard sizes stocked for prompt shipment (usually same day).

• Width is measured from inside seam to inside seam.

• Length is measured from the top edge to the bottom fold.

• Opening is in the “width” dimension.

• Custom bag sizes, custom printing, and custom hot stamping are available.

• Most sizes are packed 100 per case.

• Small sizes are packed 500 or 1,000 per case.

Dimensions

(W x L in.)

Part No. Dimensions

(W x L in.)

Part No. Dimensions

(W x L in.)

Part No.

2 x 3 10023

6 x 30 100630 12 x 12 1001212

2 x 4

10024

6.5 x 10 1006.51 12 x 14 1001214

2 x 6

10026

6.5 x 16 1006.516 12 x 16 1001216

3 x 3

10033

7 x 10 100710 12 x 18 1001218

3 x 5 10035 7 x 11 100711 12 x 24 1001224

4 x 4 10044 7 x 15 100715 12 x 25 1001225

4 x 6 10046 7 x 16 100716 12 x 30 1001230

4 x 8 10048 8 x 8 10088 14 x 18 1001418

4 x 24 100424 8 x 10 100810 14 x 20 1001420

4 x 26 100426 8 x 12 100812 14 x 30 1001430

4 x 30 100430 8 x 18 100818 15 x 18 1001518

5 x 6 10056 8 x 24 100824 16 x 18 1001618

5 x 7 10057 8 x 30 100830 16 x 20 1001620

5 x 8 10058 9 x 12 100912 16 x 24 1001624

5 x 10 100510 10 x 12 1001012 18 x 18 1001818

6 x 8 10068 10 x 14 1001014 18 x 20 1001820

6 x 9 10069 10 x 16 1001016 18 x 24 1001824

6 x 10 100610 10 x 18 1001018 18 x 30 1001830

6 x 12 100612 10 x 24 1001024 20 x 20 1002020

6 x 14 100614 10 x 26 1001026 20 x 24 1002024

6 x 16 100616 10 x 30 1001030 22 x 24 1002224

6 x 18 100618 11 x 14 1001114 24 x 24 1002424

6 x 24 100624 11 x 15 1001115 24 x 30 1002430

6 x 26 100626 30 x 24 1003024

Custom Sizes and Printing Available.

Dimensions

(W x L in.)

Part No. Dimensions

(W x L in.)

Part No. Dimensions

(W x L in.)

Part No.

2 x 3 30023

6 x 10 300610 10 x 30 3001030

3 x 3

30033

6 x 24 300624 11 x 15 3001115

3 x 4

30034

6 x 30 300630 12 x 12 3001212

3 x 5

30035

7 x 15 300715 12 x 16 3001216

4 x 4 30044 8 x 8 30088 12 x 18 3001218

4 x 6 30046 8 x 10 300810 14 x 18 3001418

4 x 8 30048 8 x 12 300812 15 x 18 3001518

4 x 24 300424 9 x 12 300912 16 x 24 3001624

4 x 30 300430 10 x 10 3001010 18 x 18 3001818

5 x 8 30058 10 x 12 3001012 18 x 24 3001824

5 x 10 300510 10 x 14 3001014 20 x 24 3002024

6 x 8 30068 10 x 24 3001024 24 x 24 3002424

Custom Sizes and Printing Available.

Open Top BagZipTop Bag

Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Oset O to 0.250

Seal width +/- 0.125

Product Data Sheet

Electronic Solutions Division

Static Control Products

926 JR Industrial Drive

Sanford, NC 27332-9733

Toll-Free: 866-722-3736

International: 919-718-0000

Email: 3mstaticinfo@mmm.com

www.3Mstatic.com

Please recycle. Printed in USA.

98-0799-1134-7 JHA

Important Notice

All statements, technical information, and recommendations related to 3M’s products

are based on information believed to be reliable, but the accuracy or completeness is not

guaranteed. Before using this product, you must evaluate it and determine if it is suitable for

your intended application. You assume all risks and liability associated with such use. Any

statements related to the product which are not contained in 3M’s current publications, or

any contrary statements contained on your purchase order shall have no force or effect unless

expressly agreed upon, in writing, by an authorized ofcer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for one year from the

time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT

LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period

stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M

product or refund the purchase price of the 3M product. Except where prohibited by law, 3M

will not be liable for any indirect, special, incidental or consequential loss or damage arising

from this 3M product, regardless of the legal theory asserted.

3M is a trademark of 3M Company. All other trademarks are owned by their respective companies.

* RoHS 2011/65/EU Compliant means that the product or part does not contain any of the substances in excess of the maximum

concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This

information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party

suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information, then 3M’s entire liability and Buyer’s exclusive

remedy will be in accordance with the Warranty section.

**Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method

3051A/3052.

3M™ Static Shielding Bag 1000

Tolerance (inches): Width -0, +0.250

Length +/- 0.125 Offset 0 to 0.250

Seal width +/- 0.125

Open Top Bag ZipTop Bag

Mouser Electronics
  
Authorized Distributor
 
  
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
 
 
 
 SCS:   
  10057  30035  1001212  1001214  1001216  1001818  10068  10035  10024  30023  3001012  100610  300430 
1002024  3001014  30046  3001824  3001518  300610  30058  100812  300812  100810  300424  300810  3001818 
10058  1001418  300630  100424  10046  3001030  3001218  1001218  1001012  1001014  1001016  1001018 
1001024  1001026  1001030  1001114  1001115  1001224  1001230  1001416  1001420  1001430  1001518 
1001618  1001620  1001624  1002224  10023  1002424  1002430  10026  1003024  100426  100430  10044  100510
  1006.516  100612  100614  100616  100618  100624  100626  100630  100710  100711  100716  10078  100814 
100818  100824  10088  100912  3001010  3001024  3001115  3001212  3001216  3001418  3001624  3002024 
3002424  30033  30044  30048  300510  300624  30068  300715  30088  300912  1001225  1001630  1001820