85BSD Digital Output Weldable or threaded process fittings Pressure/temperature read-out Digital output ASIC calibrated Absolute, gage Cable/connector option Low power option 13mm diaphragm diameter DESCRIPTION The 85BSD is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. This 14-bit digital output pressure sensor supports I2C and SPI interface protocols in either a 3.3 or 5.0Vdc supply voltage, and is designed to be weldable or threaded with process fittings. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. The 85BSD is designed for high performance, low pressure applications. A custom ASIC is used for temperature compensation, offset correction, and provides a digital output of 10~90% or 5~95%. For a similar sensor with o-ring mounting, refer to the 86BSD digital output pressure sensor. FEATURES APPLICATIONS Weldable or threaded process fittings 0.25% Accuracy 1.0 Total Error Band Cable/connector option Low power option 2 I C or SPI Interface protocols Level controls Tank level measurement Corrosive fluids and gas measurement systems Sealed systems Manifold pressure measurement Barometric pressure measurement Submersible depth monitoring STANDARD RANGES Range psiG psiA Range BarG 0 to 005 0 to 015 0 to 030 0 to 050 0 to 100 BarA 0 to .35 0 to 001 0 to 002 0 to 005 0 to 007 0 to 150 0 to 010 0 to 200 0 to 014 0 to 300 0 to 020 Intermediate pressure ranges available, contact factory 85BSD www.meas-spec.com 1/8 January 2014 85BSD Digital Output PERFORMANCE SPECIFICATIONS Supply Voltage: 3.3Vdc Ambient Temperature: 25C (unless otherwise specified) PARAMETERS MIN TYP MAX UNITS NOTES Zero Pressure Output (10% ~ 90%) 666 Count Hex 1 Zero Pressure Output (5% ~ 95%) 333 Count Hex 1 Full Scale Pressure Output (10% ~ 90%) 399A Count Hex 1 Full Scale Pressure Output (5% ~ 95%) 3CCB Count Hex 1 Accuracy Total Error Band Pressure Resolution -0.25 0.25 %Span 2 -1 1 %Span 3 0.008 Temperature Accuracy %Span -1.5 Temperature Resolution 1.5 0.1 Input Voltage Range 2.7 Supply Current 3.3 C 4 C 5.5 3 V 1 mA M 5 Overpressure 2X Rated 6 Burst Pressure 3X Rated 7 Insulation Resistance (50Vdc) 50 Load Resistance (RL) K 10 Long Term Stability (Offset & Span) 0.5 %Span/Year Compensated Temperature (5psi) 0 50 C Compensated Temperature (15psi) -20 +85 C Operating Temperature -40 +125 C 8 Storage Temperature -40 +125 C 8 14 Bits 11 Bits 8.4 ms Output Pressure Resolution Output Temperature Resolution 8 Start Time to Data Ready Output Type 10% to 90% or 5% to 95% Interface Type I C (ADDR, 0x28H) 2 I C (ADDR, 0X36H) 2 I C (ADDR, 0x46H) SPI Media - Pressure Liquids and gases compatible with 316/316L Stainless Steel 9 2 Notes 1. Measured at vacuum for absolute(A), ambient for gage(G) and sealed gage(S). Output is not ratiometric to supply voltage. 2. Accuracy: combined linearity, hysteresis and repeatability. 3. Total Error Band: includes calibration errors and temperature effects over the compensated range. See Figure 3. 4. The deviation from a best fit straight line (BFSL) fitted to the output measured over the compensated temperature range. For errors beyond the compensated temperature range, See Figure 2. 5. Between case and sensing element. 6. 2X or 400psi, whichever is less. The maximum pressure that can be applied to a transducer without changing the transducer's performance or accuracy. 7. 3X or 600psi, whichever is less. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer. 8. Maximum temperature range for product with standard cable and connector is -20C to +105C. 9. Start time to data ready is the time to get valid data after POR (Power on Reset). The time to get subsequent valid data is then specified by the response time specification. Additional Notes Sharp edge strongly recommended for welding applications. Optimum weld parameters will reduce the effect of weld heat on sens or performance. Devices with lower pressure ranges have greater susceptibility to heat generated during the weld process. 85BSD www.meas-spec.com 2/8 January 2014 85BSD Digital Output DIMENSIONS 85BSD www.meas-spec.com 3/8 January 2014 85BSD Digital Output BLOCK DIAGRAM 85BSD www.meas-spec.com 4/8 January 2014 85BSD Digital Output TEMPERATURE ACCURACY / TOTAL ERROR BAND 85BSD www.meas-spec.com 5/8 January 2014 85BSD Digital Output PRESSURE TRANSFER FUNCTIONS 85BSD www.meas-spec.com 6/8 January 2014 85BSD Digital Output TEMPERATURE TRANSFER FUNCTIONS 85BSD www.meas-spec.com 7/8 January 2014 85BSD Digital Output ORDERING INFORMATION 85B S D 015P A 4 - 3 A I C L Low Power (Blank = None, L = Low Power) Connection (P = Pads, R = Ribbon Cable, C = Cable w/ Connector) Interface (I = I2C (ADDR. 0X28H, J = I2C (ADDR. 0X36H), K = I2C (ADDR. 0X46H, S = SPI) Output (A = 10~90%, B = 5~95%) Supply Voltage (3 = 3.3Vdc, 5 = 5.0Vdc) Fitting (See Fitting Table) Type (A = Absolute, G = Gage) Pressure Range Digital Output Stainless Steel Model NORTH AMERICA EUROPE Measurement Specialties 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd. 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assum ed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specif ically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. 85BSD www.meas-spec.com 8/8 January 2014 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 85BSD300PG-4AJC 85BSD015PA-4AIC 85BSD005PG-4AIC 85BSD005PG4-5AIC 85BSD005PG4-3AIC