Manual Insert Magnetic Card Reader
3S4YR-SBRN
Compact, Highly Reliable Insert Reader
Reads 62% of Magnetic Track
■Effective strip length of 46.6 mm max.
■Microswitches incorporated for card
detection
■Wide operating temperature range
■Low power CMOS technology
■Current save mode
■Housing compatible with SCR type for
easy conversion to IC cards
■TTL-compatible interface (clock & data)
Ordering Information
®
•Access Control
•Time and Attendance
■TYPICAL APPLICATIONS
Magnetic Tracks Supported (R, R/W)
1 2 3 Center JIS II IC Contact Interface Cable Cover Color Part Number
R — — — — No TTL No No Black 3S4YR-SBR3N-50
— R — — — No TTL No No Black 3S4YR-SBR4N-50
— — R — — No TTL No No Black 3S4YR-SBR5N-50
Part number 3S4YR-SBRN
Recommended Magnetic head ISO 7810, 7811/1-5, 7812, 7813.
card type Please inquire if using high-coercivity cards.
Card feeding speed 10 to 100 cm/sec (4 to 39 in/sec)
Service life Magnetic head 300,000 passes (one round trip)
PCB 50,000 hours
Operating power supply 5 VDC ± 10%
Current consumption Operation 5 mA max., 3 mA mean
Standby 1.5 mA max., 1 mA mean
Mounting location Indoors away from wind, rain and sunlight.
Ambient temperature Operation -10° to 55°C (14° to 131°F)
Storage -30° to 70°C (-22° to 158°F)
Ambient humidity Operation 10% to 95% RH without condensation
Storage 10% to 95% RH without condensation
Vibration 10 to 55 Hz, 2 mm double amplitude, for 30 minutes in X, Y, and Z directions.
Shock Storage 300 m/sec2 (30 G) three times in each of X, Y, and Z directions for a total of 18 times.
Dimensions 78L x 60W x 21.5H mm (3.07L x 2.36W x 0.85H in)
Weight 50 g (1.8 oz)
Specifications
Note: Consult the
IC Card Basics
section of this catalog for IC contact descriptions.
•Electronic Locks
•Vending
•Remote Terminals for Computers
•Telephones •ID Card Checkers
•Gaming Machines
3S4YR-SBRN 3S4YR-SBRN
2
Engineering Data
■OUTPUT CIRCUIT DIAGRAM ■I/O INFORMATION
3S4YR-SBR4N-50
Dimensions
Unit: mm (inch)
■ 3S4YR-SBRN-50
O V
+5 VDC
Output
Output signal levels:
VOL = 0.4 V at 4 mA
VOH = 3.5 V at 1 mA
[37] PCB
(Between center of head and
card stop position)
42.4 ± 0.7
(1.67 ± 0.03)
23 ± 0.5
(0.91 ± 0.02)
9 (0.35)
30
(1.18)
ø 8
5 (0.20)
5 (0.20)
9 (0.35)
4 (0.16)
8 (0.31) 3-M3 complete thread 5
6 (0.24)
24 ± 0.2
(0.94 ± .01)
48 ± 0.2
(1.89 ± .01)
78 ± 0.8 (3.07 ± 0.3)
40 ± 0.2
(1.57 ± 0.01)
21
(0.83)
60 ± 0.3
(2.36 ± 0.01)
58 ± 0.2
(2.28 ± 0.01)
21.5
(0.85)
+4
-0
+.002
-0
7
(0.28 )
10-pin JAE single-pin header part number IL-10P-S3FP2-1.
Connector JAE part number IL-10S-S3L-N.
Pin # Signal Input/Output Description
1NC —Not connected
2 RDP Output Read data
3 RCP Output Read clock
4 CLS Output Card load
5 SW1-COM Output Card detection for rear
6 SW1-NO Input Card detection for rear
7 SW2-COM Output Card detection for front
8 SW2-NO Input Card detection for front
9 5 VDC —Vcc
10 0 V —Ground
OMRONELECTRONICS, INC.
One EastCommerceDrive
Schaumburg, IL 60173
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
1-800-55-OMRON
OMRON CANADA, INC.
885 MilnerAvenue
Scarborough,OntarioM1B5V8
416-286-6465
R
Cat. No. GC CR3 7/00 Specifications subject to change without notice. Printed in U.S.A.
