’151A Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)
Symbol Parameter Conditions Min Typ Max Units
(Note 1)
VIInput Clamp Voltage VCC eMin, IIeb
12 mA b1.5 V
VOH High Level Output VCC eMin, IOH eMax 2.4 V
Voltage VIL eMax, VIH eMin
VOL Low Level Output VCC eMin, IOL eMax 0.4 V
Voltage VIH eMin, VIL eMax
IIInput Current @Max VCC eMax, VIe5.5V 1mA
Input Voltage
IIH High Level Input Current VCC eMax, VIe2.4V 40 mA
IIL Low Level Input Current VCC eMax, VIe0.4V b1.6 mA
IOS Short Circuit VCC eMax DM54 b20 b55 mA
Output Current (Note 2) DM74 b18 b55
ICC Supply Current VCC eMax, (Note 3) 27 48 mA
Note 1: All typicals are at VCC e5V, TAe25§C.
Note 2: Not more than one output should be shorted at a time.
Note 3: ICC is measured with the strobe and data select inputs at 4.5V, all other inputs and outputs open.
’151A Switching Characteristics
at VCC e5V and TAe25§C (See Section 1 for Test Waveforms and Output Load)
Symbol Parameter From (Input) RLe400X,C
Le15 pF Units
To (Output) Min Max
tPLH Propagation Delay Time Select 38 ns
Low to High Level Output (4 Levels) to Y
tPHL Propagation Delay Time Select 30 ns
High to Low Level Output (4 Levels) to Y
tPLH Propagation Delay Time Select 26 ns
Low to High Level Output (3 Levels) to W
tPHL Propagation Delay Time Select 30 ns
High to Low Level Output (3 Levels) to W
tPLH Propagation Delay Time Strobe 33 ns
Low to High Level Output to Y
tPHL Propagation Delay Time Strobe 30 ns
High to Low Level Output to Y
tPLH Propagation Delay Time Strobe 21 ns
Low to High Level Output to W
tPHL Propagation Delay Time Strobe 25 ns
High to Low Level Output to W
tPLH Propagation Delay Time D0-D7 24 ns
Low to High Level Output to Y
tPHL Propagation Delay Time D0-D7 24 ns
High to Low Level Output to Y
tPLH Propagation Delay Time D0-D7 14 ns
Low to High Level Output to W
tPHL Propagation Delay Time D0-D7 14 ns
High to Low Level Output to W
4