Anforderungsstufe 15,4 Date Code XXXXXXX 3 -0,1 13,45 -0,1 class ERNI RC 2 EN Zone fur durchkontaktierte Locher 0,6 0,05 2 compliant zone for thru hole 0,6 0,05 2 10 x 2 = 20 8 25 4x2=8 10 x 2 = 20 15 11 1 z a b c d e f 9,8 0,1 Ebene - Level 2 8,3 0,1 Ebene - Level 1 4,5 0,3 3,7 0,3 A 1 max. 11,3 0,1 Ebene - Level 3 1 max. B C D E F K L M N P Q R S T U V W X P2 50 max. P1 Bestuckungsplan - contact layout R3 25 24 23 22 21 20 19 18 17 16 15 11 10 9 8 7 6 5 4 3 2 1 A A A A A - A C A C A - A A A A A - A A A A A - A A A A A - A A A A A - A A A A A - A A A A A - A A A A A - A A A A A - A A A A A - A A A A A - C A C A C - C A C A C - A C A C A - A C A C A - C A C A C - C A C A C - A C A C A - A C A C A - C A C A C - C A C A C - R2 z a b c d e f R1 P3 Y Z P4 1,8 0,1 2,1 0,1 13 0,2 10 x 2 = (20) 0,05 14,5 0,2 16 0,2 Board hole pattern (Component mounting side) Lochbild fur Leiterplatte (Bestuckungsseite) 4 10 x 2 = (20) 4 alle Locher 2 all holes 5,3 0,1 1) +0,05 2 nicht durchkontaktiert not plated through 6,8 0,1 8,3 0,1 0,6 0,05 Durchmesser des metallisierten Loches 0,6 0,05 Diameter of finished plated-through hole 0,7 0,02 Bohrungsdurchmesser des Loches 0,7 0,02 Diameter of drilled hole Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 4 x 2 = (8) Metal plating of plating-through hole see drawing 114406 Fehlende Mae und Angaben nach IEC 61076-4-101 25 15 11 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 2 Missing information and dimensions per 61076-4-101 1 Information: P2 Level 1, 3 siehe Bestuckungsplan / Tolerances All Dimensions see contact layout Anforderungsstufe 2 / class 2 All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. in mm Designation Subject to modification without prior notice. Drawing will not be updated. ERmet Messerleiste A ERmet male wide type A 100101870001 www.ERNI.com 11.05.2011 Index 2:1 Scale Date Class ERMA K A3