SBS011 Ordering number : ENN7909 SBS011 Schottky Barrier Diode 15V, 150mA Rectifier Applications * High frequency rectification (switching regulators, converters, choppers). Features * * Low forward voltage (IF=150mA, VF max=0.4V). Ultrasmall-sized package permitting applied sets to be made small and slim. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Repetitive Peak Reverse Voltage Conditions Ratings Unit VRRM VRSM 15 15 V Average Output Current IO 150 mA Surge Forward Current IFSM Nonrepetitive Peak Reverse Surge Voltage 50Hz sine wave, 1 cycle V 2 A Junction Temperature Tj --55 to +125 C Storage Temperature Tstg --55 to +125 C Electrical Characteristics at Ta=25C Parameter Reverse Voltage Forward Voltage Reverse Current Reverse Recovery Time Conditions VR VF1 IR=0.5mA IF=100mA VF2 IF=150mA VR=6V VR=10V, f=1MHz IR Interterminal Capacitance Thermal Resistance Symbol C trr Rth(j-a) Ratings min typ max 15 V 0.32 0.35 0.35 0.40 V 45 A 9 IF=IR=10mA, See specified Test Circuit. V pF 10 Mounted on a ceramic board (250mm20.8mm) Unit 250 ns C / W Marking : SA Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 61504 TS IM TA-101058 No.7909-1/3 SBS011 Package Dimensions unit : mm 1331 trr Test Circuit 0.1 10s 50 100 10 10mA 0.3 1.4 0.25 1.4 0.8 3 2 --5V 0.3 1 0.45 1mA 10mA Duty10% trr 0.2 0.6 1 : Anode 2 : No Contact 3 : Cathode SANYO : SSFP IF -- VF 7 5 Reverse Current, IR -- A 100 7 5 5C Ta =1 2 10 7 5 100 75 C 50 C C 25 C Forward Current, IF -- mA 3 2 3 2 3 2 1.0 7 5 3 2 Ta=125C 100C 1000 7 5 3 2 75C 100 7 5 3 2 50C 25C 10 7 5 3 2 1.0 0 0.1 0.2 0.3 0.5 0.4 Forward Voltage, VF -- V 0 0.6 (1) (2) (4) (3) 360 Sine wave 0.3 180 360 (1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 0.1 0 0 0.1 0.2 8 10 12 14 16 IT06809 C -- VR f=1MHz 0.2 6 5 Rectangular wave 0.4 4 Reverse Voltage, VR -- V PF(AV) -- IO 0.5 2 IT06808 Interterminal Capacitance, C -- pF Average Forward Power Dissipation, PF(AV) -- W IR -- VR 10000 7 5 3 2 0.3 0.4 0.5 Average Forward Current, IO -- A 0.6 0.7 IT06810 3 2 10 7 5 1.0 2 3 5 7 10 Reverse Voltage, VR -- V 2 3 IT06811 No.7909-2/3 SBS011 IFSM -- t Surge Forward Current, IFSM(Peak) -- A 2.8 Current waveform 50Hz sine wave 2.4 IS 20ms t 2.0 1.6 1.2 0.8 0.4 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00268 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2004. Specifications and information herein are subject to change without notice. PS No.7909-3/3