US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
AEC
Q200 85°C
+
Halogen
Free
USB 3.0 Common Mode Choke 0603
Document 406-1
Document 406-1 Revised 11/01/18
Common mode Cutoff Common mode DCR
peak impedance frequency2 attenuation typ (dB) Inductance3 max4 Isolation5 Irms6
Part number1 (kOhms) (GHz) 10 MHz 500 MHz 1 GHz min (nH) (Ohms) (Vrms) (mA)
0603USB-251ML_ >0.10 @ >3.0 GHz 3.8 1.31 3.16 8.45 18 0.077 250 500
0603USB-601ML_ >0.18 @ >3.0 GHz 3.4 3.00 6.88 13.27 37 0.109 250 500
0603USB-951ML_ 0.30 @ 2.6 GHz 2.8 4.62 9.75 16.06 63 0.142 250 500
0603USB-142ML_ 0.42 @ 1.9 GHz 1.9 6.85 12.80 18.16 98 0.174 250 500
0603USB-222ML_ 0.66 @ 1.8 GHz 0.96 9.14 16.53 20.29 150 0.209 250 500
1. When ordering, please specify packaging code:
0603USB-222MLC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plas-
tic tape (7500 parts per full reel).
2 Frequency at which the differential mode attenuation equals −3 dB
3. Inductance measured at 100 MHz using an Agilent/HP 4286A
impedance analyzer and a Coilcraft SMD-A fixture.
4. DCR is specified per winding.
5. Winding to winding isolation (hipot) tested for one minute.
6. Current per winding that causes a 20°C rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.042
1,07
±0.004
±0,10
0.030
0,76
±0.003
±0,076
0.010
0,25
0.023
0,58
0.034
0,86
0.030
0,73
0.013
0,33
0.012
0,30
0.010
0,25
0.004
0,10
Recommended
Land Pattern
0.060 ±0.003
1,52 ±0,076
1
1
2
2
4
4
3
3
Designer’s Kit C470 contains 10 each of all 0603USB, 0805USB,
0805USBF, 0805USBN and 1206USB parts
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations Gold over nickel over silver-palladium-glass frit
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+105°C with derated current
Storage temperature Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
• For noise suppression in super high speed signal lines: USB
3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.; and in high
speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc.
• Suitable for USB-type C specification 1.0
• Up to 3.7 GHz differential mode 3 dB cutoff frequency; up to
20 dB common mode noise attenuation in GHz range
Dimensions are in inches
mm
Weight 4.9 – 5.2 mg
Packaging 2000 per 7″ reel; 7500 per 13″ reel; Plastic tape: 8 mm
wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth
These parts have no marking.
3
4
2
1
Sample
& buy
Support
& FAQ
Web
page
Tools &
softw
are
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
USB 3.0 Common Mode Choke
—
0603
AEC
Q200 85°C
+
Halogen
Free
Document 406-2 Revised 11/01/18
Document 406-2
Typical attenuation (Ref: 50 Ohms)
Typical impedance vs frequency
0
10
20
30
110 100 100001000
Attenuation (dB)
Frequency (MHz)
-142
-251
-601
-951
-222
Common mode
Differential mode
1000
100
10
1.0
0.1
110 100 100001000
Impedance (Ohms)
Frequency (MHz)
-142
-251
-601
-951
-222
Common mode
Differential mode
