Web page Sample & buy Tools & software Support & FAQ Document 406-1 USB 3.0 Common Mode Choke 0603 Halogen Free * For noise suppression in super high speed signal lines: USB 3.x, HDMI 2.0, HDBaseTTM, DisplayPort, DVI, etc.; and in high speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc. * Suitable for USB-type C specification 1.0 * Up to 3.7 GHz differential mode 3 dB cutoff frequency; up to 20 dB common mode noise attenuation in GHz range AEC Designer's Kit C470 contains 10 each of all 0603USB, 0805USB, 0805USBF, 0805USBN and 1206USB parts Core material Ferrite Environmental RoHS compliant, halogen free Terminations Gold over nickel over silver-palladium-glass frit Ambient temperature -40C to +85C with Irms current, +85C to +105C with derated current Storage temperature Component: -40C to +105C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Q200 +85C Part number1 0603USB-251ML_ 0603USB-601ML_ 0603USB-951ML_ 0603USB-142ML_ 0603USB-222ML_ Common mode peak impedance (kOhms) Common mode Cutoff DCR attenuation typ (dB) frequency2 Inductance3 max4 (GHz) 10 MHz 500 MHz 1 GHz min (nH) (Ohms) >0.10 @ >3.0 GHz >0.18 @ >3.0 GHz 0.30 @ 2.6 GHz 0.42 @ 1.9 GHz 0.66 @ 1.8 GHz 3.8 3.4 2.8 1.9 0.96 1.31 3.00 4.62 6.85 9.14 3.16 6.88 9.75 12.80 16.53 1. When ordering, please specify packaging code: 0603USB-222MLC Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel). 2 Frequency at which the differential mode attenuation equals -3 dB 3. Inductance measured at 100 MHz using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture. 4. DCR is specified per winding. 5. Winding to winding isolation (hipot) tested for one minute. 6. Current per winding that causes a 20C rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 8.45 13.27 16.06 18.16 20.29 18 37 63 98 150 Isolation5 Irms6 (Vrms) (mA) 0.077 0.109 0.142 0.174 0.209 0.060 0.003 1,52 0,076 0.042 0.004 1,07 0,10 250 250 250 250 250 500 500 500 500 500 1 2 4 3 0.004 0,10 0.023 0,58 0.013 0.034 0,33 0,86 1 2 4 3 0.030 0,73 2 1 3 4 0.010 0,25 0.030 0.003 0,76 0,076 0.010 0,25 These parts have no marking. Recommended Land Pattern Dimensions are in 0.012 0,30 inches mm Weight 4.9 - 5.2 mg Packaging 2000 per 7 reel; 7500 per 13 reel; Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 406-1 Revised 11/01/18 (c) Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 406-2 USB 3.0 Common Mode Choke -- 0603 Typical attenuation (Ref: 50 Ohms) 0 Halogen Free AEC Q200 +85C Attenuation (dB) 10 20 -251 -601 -951 -142 -222 30 Common mode Differential mode 1 10 100 1000 10000 Frequency (MHz) Typical impedance vs frequency 1000 Impedance (Ohms) 100 10 -251 -601 -951 -142 -222 Common mode Differential mode 1.0 0.1 1 10 100 1000 10000 Frequency (MHz) US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 406-2 Revised 11/01/18 (c) Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: 0603USB-951MLB 0603USB-251MLB 0603USB-222MLC 0603USB-251MLC 0603USB-222MLB 0603USB951MLC 0603USB-601MLC 0603USB-142MLB 0603USB-601MLB 0603USB-142MLC