NOT RECOMMENDED NMV MV 24V & 48V Series www.murata-ps.com NS DESIG NEW R FOR 3kVDC Isolated 1W Single S & Dual Output DC/DC Converters RoHS compliant Efficiency to 85% Power density up to 0.85W/cm3 Single or dual output UL 94V-0 package material No heatsink required Footprint from 1.17cm2 Industry standard pinout Power sharing on dual output 3kVDC isolation (1 minute) 24V & 48V input 5V, 9V, 12V and 15V output Internal SMD construction Fully encapsulated with toroidal magnetics No external components required No electrolytic or tantalum capacitors DESCRIPTION The NMV series offers single or dual output versions in the same size package as the popular NMA series. The higher isolation is particularly useful in control type applications where the standard 1kV is not sufficient. NMV2412SC NMV2405SAC 24 24 12 5 NMV2405DAC NMV2409DAC NMV2412DAC NMV2415DAC NMV2409SAC NMV2412SAC NMV2415SAC NMV4805DAC NMV4809DAC NMV4812DAC NMV4815DAC NMV4805SAC NMV4809SAC NMV4812SAC NMV4815SAC NMV2405DC NMV2409DC NMV2412DC NMV2415DC NMV2405SC NMV2409SC NMV2415SC NMV4805DC NMV4809DC NMV4812DC NMV4815DC NMV4805SC NMV4809SC NMV4812SC NMV4815SC 24 24 24 24 24 24 24 48 48 48 48 48 48 48 48 24 24 24 24 24 24 24 48 48 48 48 48 48 48 48 5 9 12 15 9 12 15 5 9 12 15 5 9 12 15 5 9 12 15 5 9 15 5 9 12 15 5 9 12 15 % MTTF1 mA pF kHrs mV p-p % NOT RECOMMENDED FOR NEW DESIGNS: 42 10 150 80 65 134 200 15 150 70 33 201 OBSOLETE: 200 15 150 70 33 201 111 10 150 80 40 185 84 10 150 80 55 163 67 10 150 80 70 136 111 10 150 80 40 185 84 10 150 80 55 163 67 10 150 80 70 136 200 15 150 70 48 213 111 10 150 80 59 194 84 10 150 80 70 169 67 10 150 80 81 140 200 15 150 70 48 213 111 10 150 80 59 194 84 10 150 80 70 169 67 10 150 80 81 140 100 15 150 70 45 194 55 10 150 80 52 166 42 10 150 80 65 134 33 10 150 80 70 101 100 15 150 70 45 194 55 10 150 80 52 166 33 10 150 80 70 101 100 15 150 70 45 205 55 10 150 80 58 175 42 10 150 80 68 137 33 10 150 80 75 102 100 15 150 70 45 205 55 10 150 80 58 175 42 10 150 80 68 137 33 10 150 80 75 102 Package Style FEATURES V Isolation Capacitance V Efficiency Order Code Nominal Input Voltage Output Voltage Output Current Load Regulation (Max) Ripple & Noise (Max) SELECTION GUIDE RECOMMENDED ALTERNATIVES (Click to view the MEV1 data sheet) SIP SIP MEV1D2412SC MEV1S2405SC DIP DIP DIP DIP SIP SIP SIP DIP DIP DIP DIP SIP SIP SIP SIP DIP DIP DIP DIP SIP SIP SIP DIP DIP DIP DIP SIP DIP DIP DIP MEV1S2405DC MEV1S2409DC MEV1S2412DC MEV1S2415DC MEV1S2409SC MEV1S2412SC MEV1S2415SC MEV1S4805SC MEV1S4809SC MEV1S4812SC MEV1S4815SC MEV1S4805SC MEV1S4805SC MEV1S4812SC MEV1S4815SC MEV1D2405DC MEV1D2409DC MEV1D2412DC MEV1D2415DC MEV1D2405SC MEV1D2409SC MEV1D2415SC MEV1D4805SC MEV1D4809SC MEV1D4812SC MEV1D4815SC MEV1D4805SC MEV1D4809SC MEV1D4812SC MEV1D4815SC INPUT CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Voltage range Continuous operation, 24V input types Continuous operation, 48V input types 21.6 43.2 24 48 26.4 52.8 V 1. Calculated using MIL-HDBK-217F with nominal input voltage at full load. 2. Supply voltage must be discontinued at the end of the short circuit duration. All specifications typical at TA=25C, nominal input voltage and rated output current unless otherwise specified. For full details go to www.murata-ps.com/rohs www.murata-ps.com All enquiries: www.murata-ps.com/support KDC_NMVC2.G01 Page 1 of 4 NMV 24V & 48V Series 3kVDC Isolated 1W Single & Dual Output DC/DC Converters ABSOLUTE MAXIMUM RATINGS Short-circuit protection2 Lead temperature 1.5mm from case for 10 seconds Input voltage VIN, NMV24 types Input voltage VIN, NMV48 types 1 second 300C 28V 54V OUTPUT CHARACTERISTICS Parameter Conditions TA=0C to 70C Rated Power1 Voltage Set Point Accuracy Line regulation Min. Typ. See tolerance envelope High VIN to low VIN Max. Units 1 W 1.2 %/% Max. Units ISOLATION CHARACTERISTICS Parameter Conditions Min. Isolation test voltage Resistance Flash tested for 1 minute Viso= 1000VDC 3000 1 Parameter Conditions Min. Switching frequency All input types Typ. VDC G GENERAL CHARACTERISTICS Typ. Max. 100 Units kHz TEMPERATURE CHARACTERISTICS Parameter Conditions Min. Specification Storage Cooling All output types 0 -55 Typ. Max. Units 70 150 C Free air convection TOLERANCE ENVELOPE TEMPERATURE DERATING GRAPH +10% 1.0 Safe Operating Area 0.5 0 +5% VNOM 70C 0 150 50 100 Ambient Temperature (C) Output Voltage Output Power (W) 1.5 Typical L oad Line +2.5% -2.5% -7.5% 10 75 50 25 Output Load Current (%) 100 TECHNICAL NOTES ISOLATION VOLTAGE `Hi Pot Test', `Flash Tested', `Withstand Voltage', `Proof Voltage', `Dielectric Withstand Voltage' & `Isolation Test Voltage' are all terms that relate to the same thing, a test voltage, applied for a specified time, across a component designed to provide electrical isolation, to verify the integrity of that isolation. Murata Power Solutions NMV series of DC/DC converters are all 100% production tested at their stated isolation voltage. This is 3kVDC for 1 minute. A question commonly asked is, "What is the continuous voltage that can be applied across the part in normal operation?" For a part holding no specific agency approvals, such as the NMV series, both input and output should normally be maintained within SELV limits i.e. less than 42.4V peak, or 60VDC. The isolation test voltage represents a measure of immunity to transient voltages and the part should never be used as an element of a safety isolation system. The part could be expected to function correctly with several hundred volts offset applied continuously across the isolation barrier; but then the circuitry on both sides of the barrier must be regarded as operating at an unsafe voltage and further isolation/insulation systems must form a barrier between these circuits and any user-accessible circuitry according to safety standard requirements. REPEATED HIGH-VOLTAGE ISOLATION TESTING It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials, construction and environment. The NMV series has toroidal isolation transformers, with no additional insulation between primary and secondary windings of enameled wire. While parts can be expected to withstand several times the stated test voltage, the isolation capability does depend on the wire insulation. Any material, including this enamel (typically polyurethane) is susceptible to eventual chemical degradation when subject to very high applied voltages thus implying that the number of tests should be strictly limited. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from specified test voltage. This consideration equally applies to agency recognized parts rated for better than functional isolation where the wire enamel insulation is always supplemented by a further insulation system of physical spacing or barriers. www.murata-ps.com All enquiries: www.murata-ps.com/support KDC_NMVC2.G01 Page 2 of 4 NMV 24V & 48V Series 3kVDC Isolated 1W Single & Dual Output DC/DC Converters PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS DIP package SIP package 0.77 (19.50) 0.386 (9.80) 0.77 (19.50) 0.236 (6.00) NMV2405DC XYYWWi 0.268 (6.80) 0.394 (10.00) 0.181 (4.60) 0.142 (3.60) NMV2415SC 5 6* 7 1 2 0.022 (0.55) 0.018 (0.45) 0.1 (2.54) 0.181 (4.60) 0.142 (3.60) 1 7 14 10 9* 8 0.0740.02 (1.880.50) 0.0118 (0.30) 0.0079 (0.20) 0.118 (0.30) 0.0079 (0.20) 0.049 (1.25) 0.084 (2.13) 0.0216 (0.55) 0.0177 (0.45) 0.1 (2.54) 0.043 (1.09) 0.3 (7.62) 0.0216 (0.55) 0.0177 (0.45) XYYWWi 0.6 (15.24) 0.6 (15.24) 0.303 (7.70) for 48V variants 0.300 (7.50) for 48V variants * Pin not fitted on single output variants. Weight: 2.11g (DIP and SIP) All dimensions in inches 0.01 (mm 0.25mm). All pins on a 0.1 (2.54) pitch and within 0.01 (0.25) of true position. PIN CONNECTIONS Single output variants Pin 14 Pin DIP Function 1 7 8 10 14 www.murata-ps.com -VIN NC +VOUT -VOUT +VIN Pin 1 2 5 7 Dual output variants 7 Pin SIP Function +VIN -VIN -VOUT +VOUT Pin 14 Pin DIP Function 1 7 8 9 10 14 -VIN NC +VOUT OV -VOUT +VIN Pin 1 2 5 6 7 7 Pin SIP Function +VIN -VIN -VOUT OV +VOUT All enquiries: www.murata-ps.com/support KDC_NMVC2.G01 Page 3 of 4 NMV 24V & 48V Series 3kVDC Isolated 1W Single & Dual Output DC/DC Converters PACKAGE SPECIFICATIONS (continued) RECOMMENDED FOOTPRINT DETAILS 7 Pin SIP Package 14 Pin DIP Package )0-&4 )0-&4 *Hole not required for single output variants. TUBE OUTLINE DIMENSIONS 14 Pin DIP Tube 7 Pin SIP Tube Unless otherwise stated all dimensions in inches (mm) 0.5mm. Tube length (14 Pin DIP) : 20.47 (520mm 2mm). Tube length (7 Pin SIP) : 20.47 (520mm 2mm). Tube Quantity : 25 RoHS COMPLIANCE INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. For further information, please visit www.murata-ps.com/rohs Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED www.murata-ps.com/locations This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: http://www.murata-ps.com/requirements/ Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. (c) 2012 Murata Power Solutions, Inc. All enquiries: www.murata-ps.com/support KDC_NMVC2.G01 Page 4 of 4