2400-C-US - KEITHLEY - Datasheet.Live

SMU INSTRUMENTS

www.keithley.com

1.888.KEITHLEY (U.S. only)

A Greater Measure of Conﬁdence

Keithley’s Series 2400 Source Measure Unit (SMU) Instruments

are designed specifically for test applications that demand tightly

coupled sourcing and measurement. All SourceMeter models pro-

vide precision voltage and current sourcing as well as measure-

ment capabilities. Each SourceMeter SMU instrument is both

a highly stable DC power source and a true instrument-grade

6½-digit multimeter. The power source characteristics include

low noise, precision, and readback. The multimeter capabilities

include high repeatability and low noise. The result is a compact,

single-channel, DC parametric tester. In operation, these instru-

ments can act as a voltage source, a current source, a voltage

meter, a current meter, and an ohmmeter. Manufacturers of

components and modules for the communications, semiconduc-

tor, computer, automotive, and medical industries will find the

SourceMeter SMU instruments invaluable for a wide range of

characterization and production test applications.

Advantages of a Tightly Integrated Instrument

By linking source and measurement circuitry in a single unit,

these instruments offer a variety of advantages over systems

configured with separate source and measurement instruments.

For example, they minimize the time required for test station

development, setup, and maintenance, while lowering the overall

cost of system ownership. They simplify the test process itself

by eliminating many of the complex synchronization and connection issues associated with using

multiple instruments. And, their compact half-rack size conserves precious “real estate” in the test

rack or bench.

Power of Five Instruments in One (IV Source, IVR Measure)

The tightly coupled nature of a SourceMeter SMU instrument provides many advantages over solu-

tions configured from separate instruments, such as a precision power supply and a digital multime-

ter. For example, it provides faster test times by reducing GPIB traffic and simplifies the remote pro-

gramming interface. It also protects the device under test from damage due to accidental overloads,

thermal runaway, etc. Both the current and voltage source are programmable with readback to help

maximize device measurement integrity. If the readback reaches a programmed compliance limit,

then the source is clamped at the limit, providing fault protection.

•Five instruments in one

(IV Source, IVR Measure)

•Seven models: 20–100W DC,

1000W pulsed, 1100V to 1µV,

10A to 10pA

•Source and sink (4-quadrant)

operation

•0.012% basic measure accuracy

with 6½-digit resolution

•2-, 4-, and 6-wire remote

V-source and measure sensing

•1700 readings/second at

4½ digits via GPIB

•Pass/Fail comparator for fast

sorting/binning

•Available high speed sense lead

contact check function

•Programmable DIO port for

automation/handler/prober

control (except Model 2401)

•Standard SCPI GPIB, RS-232 and

Keithley Trigger Link interfaces

•Keithley LabTracer 2.0 I-V curve

tracing application software

(download)

ACCESSORIES AVAILABLE

TEST LEADS AND PROBES

1754 2-Wire Universal 10-Piece Test Lead Kit

5804 Kelvin (4-Wire) Universal 10-Piece Test Lead Kit

5805 Kelvin (4-Wire) Spring-Loaded Probes

5808 Low Cost Single-pin Kelvin Probe Set

5809 Low Cost Kelvin Clip Lead Set

8607 2-Wire, 1000V Banana Cables, 1m (3.3 ft)

CA-18-1 Shielded Dual Banana Cable, 1.2m (4 ft)

SWITCHING HARDWARE

7001 Two-Slot Switch System

7002 Ten-Slot Switch System

7019-C 6-Wire Ohms Switch Card

7053 High-Current Switch Card

CABLES/ADAPTERS

7007-1 Shielded GPIB Cable, 1m (3.3 ft)

7007-2 Shielded GPIB Cable, 2m (6.6 ft)

7009-5 RS-232 Cable

8620 Shorting Plug

COMMUNICATION INTERFACE

KPCI-488LPA IEEE-488 Interface/Controller for the PCI Bus

KUSB-488B IEEE-488 USB-to-GPIB Interface Adapter

TRIGGERING AND CONTROL

2499-DIGIO Digital I/O Expander Assembly

(not for Model 2401)

8501-1 Trigger Link Cable, DIN-to-DIN, 1m (3.3 ft)

8501-2 Trigger Link Cable, DIN-to-DIN, 2m (6.6 ft)

8502 Trigger Link to BNC Breakout Box

8503 Trigger Link Cable, DIN-to-Dual BNC, 1m (3.3 ft)

8505 Male to 2-Female Y-DIN Cable for Trigger Link

RACK MOUNT KITS

4288-1 Single Fixed Rack Mount Kit

4288-2 Dual Fixed Rack Mount Kit

4288-4 Dual Fixed Rack Mount Kit

4288-5 Shelf Type Side by Side Rack Mounting Kit

4288-9 Dual Fixed Rack Mounting Kit

SOFTWARE

LabTracer 2.0 Curve Tracing Software (downloadable)

Series 2400

SourceMeter® SMU Instruments

Tightly coupled precision sourcing and measurement

SMU INSTRUMENTS

A Greater Measure of Conﬁdence

www.keithley.com

1.888.KEITHLEY (U.S. only)

Ordering Information

2400 200V, 1A, 20W

SourceMeter SMU

Instrument

2400-C 200V, 1A, 20W

SourceMeter SMU

Instrument with Contact

Check

2401 20V, 1A, 20W SourceMeter

SMU Instrument

2410 1100V, 1A, 20W

SourceMeter SMU

Instrument

2410-C 1100V, 1A, 20W

SourceMeter SMU

Instrument with Contact

Check

2420 60V, 3A, 60W SourceMeter

SMU Instrument

2420-C 60V, 3A, 60W SourceMeter

SMU Instrument with

Contact Check

2425 100V, 3A, 100W

SourceMeter SMU

Instrument

2425-C 100V, 3A, 100W

SourceMeter SMU

Instrument with Contact

Check

2430 100V, 10A, 1000W

Pulse Mode SourceMeter

SMU Instrument

2430-C 100V, 10A, 1000W

Pulse Mode SourceMeter

SMU Instrument with

Contact Check

2440 40V, 5A, 50W SourceMeter

SMU Instrument

2440-C 40V, 5A, 50W SourceMeter

SMU Instrument with

Contact Check

Accessories Supplied

Model 8605 Test Leads

LabVIEW Software Driver

(downloadable)

LabTracer Software

(downloadable)

Local

Remote

Local

DUT

IN/OUT HI

SENSE HI

SENSE LO

IN/OUT LO

Imeter

Isource

Vmeter/Compliance

Local

Remote

Local

DUT

IN/OUT HI

SENSE HI

SENSE LO

IN/OUT LO

Imeter/Compliance

Vsource Vmeter

Feedback to

Adjust Vsource

Source I–Measure V, I, or W configuration Source V–Measure I, V, or W configuration

I-V Characteristics

All SourceMeter SMU instruments provide four-quadrant operation. In the first and third quadrants

they operate as a source, delivering power to a load. In the second and fourth quadrants they oper-

ate as a sink, dissipating power internally. Voltage, current, and resistance can be measured during

source or sink operation.

Series 2400

SourceMeter® SMU Instruments

+1A

–1A

+100mA

+20V–20V +200V

–200V

–100mA

2400

only

2400

only

+1A

–1A

+100mA

+20V–20V +200V

–200V

–100mA

+1A

–1A

+200mA

+20V–20V +200V

–200V

–100mA

+20mA

–20mA

+1100V–1100V

+1A

+20V–20V

–1A

+100mA

–100mA

+3A

–60V +60V

–3A

+1A

+60

–100mA

+20

–20–60+100V

–100V

+3A

+100mA

–1A

–3A

+1A

+60

–100mA

+20–20–60+100V

+3A

+100mA

+10A

–1A

–3A

–10A

–100V

100mA

–10V +10V

–100mA

–3A

–5A

–40V +40V

–1A

Duty cycle

limited

Duty cycle

limited

Duty cycle

limited

Duty cycle limitedDuty cycle limited

Duty cycle limited

Pulse mode only

Model 2400

SourceMeter

SMU Instrument

Series 2400 SourceMeter SMU Instruments

Model 2410

High-Voltage

SourceMeter

SMU Instrument

Model 2430

1kW Pulse Mode

SourceMeter

SMU Instrument

Model 2440

5A SourceMeter

SMU Instrument

Model 2420

3A SourceMeter

SMU Instrument

Model 2425

100W SourceMeter

SMU Instrument

Model 2401

Low-Voltage

SourceMeter

SMU Instrument

Tightly coupled precision sourcing and measurement

SMU INSTRUMENTS

www.keithley.com

1.888.KEITHLEY (U.S. only)

A Greater Measure of Conﬁdence

Automation for Speed

A SourceMeter SMU instrument streamlines production testing. It sources voltage or current while

making measurements without needing to change connections. It is designed for reliable operation

in non-stop production environments. To provide the throughput demanded by production applica-

tions, the SourceMeter SMU instrument offers many built-in features that allow it to run complex test

sequences without computer control or GPIB communications slowing things down.

Standard and Custom Sweeps

Sweep solutions greatly accelerate testing with

automation hooks. Three basic sweep waveforms

are provided that can be programmed for single-

event or continuous operation. They are ideal for

I/V, I/R, V/I, and V/R characterization.

•Linear Staircase Sweep: Moves from the start

level to the stop level in equal linear steps

•Logarithmic Staircase Sweep: Done on a

log scale with a specified number of steps

per decade

•Custom Sweep: Allows construction of

special sweeps by specifying the number of

measurement points and the source level at

each point

•Up to 1700 readings/second at 4½ digits to

the GPIB bus

•5000 readings can be stored in the non-

volatile buffer memory

Built-In Test Sequencer

(Source Memory List)

The Source Memory list provides faster and

easier testing by allowing you to setup and

execute up to 100 different tests that run without

PC intervention.

•Stores up to 100 instrument configurations, each containing source settings, measurement

settings, pass/fail criteria, etc.

•Pass/fail limit test as fast as 500µs per point

•Onboard comparator eliminates the delay caused when sending data to the computer for analysis

•Built-in, user definable math functions to calculate derived parameters

Start

Bias Bias

User

defined

steps

Stop

Linear staircase sweep

Logarithmic staircase sweep

Custom sweep

TYPICAL APPLICATIONS

Devices:

•Discrete semiconductor devices

•Passive devices

•Transient suppression devices

•ICs, RFICs, MMICs

•Laser diodes, laser diode

modules, LEDs, photodetectors

• Circuit protection devices: TVS,

MOV, Fuses, etc.

•Airbags

•Connectors, switches, relays

• High brightness LEDs

(DC and pulse)

Tests:

•Leakage

•Low voltage/resistances

•LIV

•IDDQ

•I-V characterization

•Isolation and trace resistance

•Temperature coefficient

•Forward voltage, reverse

breakdown, leakage current

• DC parametric test

• DC power source

•HIPOT

•Photovoltaic cell efficiency

(source and sink)

•Dielectric withstanding

Test Pass/Fail Test If Passes Test If Fails Test

Test 1 Check VF1 at

100mA against

pass/fail limits

Go to Test 2

1. Bin part to bad bin

2. Transmit data to

computer while

handler is placing

new part

3. Return to Test 1

Test 2 Check VF2 at 1A

against pass/fail

limits

Go to Test 3

Test 3 Check leakage

current at –500V

and test against

pass/fail limits

1. Bin part to good bin

2. Transmit readings to

computer while handler

is placing new part

3. Return to Test 1

Example Test Sequence

Test 3

Test 2

Test 1

Series 2400 SourceMeter® SMU Instruments

Tightly coupled precision sourcing and measurement

SMU INSTRUMENTS

A Greater Measure of Conﬁdence

www.keithley.com

1.888.KEITHLEY (U.S. only)

Digital I/O Interface

The digital I/O interface can link a SourceMeter SMU instrument to many

popular component handlers, including Aetrium, Aeco, and Robotronics.

Other capabilities of the interface include:

•Tight systems integration for applications such as binning and sorting

•Built-in component handler interface

•Start of test and end of test signals

•5V, 300mA power supply

• Optional expander accessory (Model 2499-DIGIO) adds 16 digital I/O lines

The digital I/O interface is available on all Series 2400 SoourceMeter

instruments except the Model 2401.

Trigger Link Interface

All SourceMeter SMU instruments include Keithley’s unique Trigger Link

interface which provides high-speed, seamless communications with many

of Keithley’s other instruments. For example, use the Trigger Link interface

to connect a SourceMeter SMU instrument with a Series 7000 Switching

System for a complete multi-point test solution. With Trigger Link, the

Series 7000 Switching Systems can be controlled by a SourceMeter SMU

instrument during a high-speed test sequence independent of a computer

and GPIB.

Optional Contact Check Function

The Contact Check function makes it simple to verify good connections

quickly and easily before an automated test sequence begins. This elimi-

nates measurement errors and false product failures associated with con-

tact fatigue, breakage, contamination, loose or broken connection, relay

failures, etc. Some capabilities of this function are:

•350µs verification and notification process time

•The output of the SourceMeter SMU instrument is automatically shut

off after a fault and is not re-activated until good contact is verified,

protecting the device under test from damage and the operator from

potential safety hazards.

•3 pass/fail threshold values: 2W, 15W, and 50W

•No energy passes through the device under test during the operation.

•Enabled either from the front panel or remotely over the GPIB

•3 fault notification methods

Unique 6-Wire Ohms Technique

SourceMeter SMU instruments can make standard 4-wire, split Kelvin, and

6-wire, guarded ohms measurements and can be configured for either the

constant current or constant voltage method. The 6-wire ohms technique:

•Uses guard and guard sense leads in addition to the 4-wire sense and

source leads.

•Locks out parallel current paths when measuring resistor networks or

hybrid circuits to isolate the component under test.

•Allows users to configure and plot data easily from Series 2400

SourceMeter SMU instruments, making characterization of two, three,

and four terminal devices a snap.

meter

V or I

Source

350µs

Contact Check

(optional)

GUARD

GUARD SENSE

IN/OUT HI

SENSE HI

SENSE LO

IN/OUT LO

Pass

Fail

Contact check option for 4-wire or 6-wire applications Free LabTracer 2.0 device characterization software (downloadable)

GUARD

GUARD SENSE

IN/OUT HI

SENSE HI

SENSE LO

IN/OUT LO

DUT

Vmeter

Imeter

Isource

6-Wire Ohms Circuit. All test current flows through R1 because the

high current guard drives the voltage across R2 to 0V.

Series 2400 SourceMeter® SMU Instruments

Tightly coupled precision sourcing and measurement

SMU INSTRUMENTS

www.keithley.com

1.888.KEITHLEY (U.S. only)

A Greater Measure of Conﬁdence

Voltage Accuracy (Local or Remote Sense)

Model Range

Programming

Resolution

Source1

Accuracy (1 Year)

23°C ±5°C

±(% rdg. + volts)

Default

Measurement

Resolution

Measurement2, 3, 4

Accuracy (1 Year)

23°C ±5°C

±(% rdg. + volts)

Output Slew Rate

(±30%) Source/Sink Limit

2400, 2400-C,

2401

200.000 mV 5 µV 0.02% + 600 µV 1 µV 0.012% + 300 µV

±21 V @ ±1.05 A

±210 V @ ±105 mA*

2.00000 V 50 µV 0.02% + 600 µV 10 µV 0.012% + 300 µV

20.0000 V 500 µV 0.02% + 2.4 mV 100 µV 0.015% + 1.5 mV 0.08 V/µs

200.000 V* 5 mV 0.02% + 24 mV 1 mV 0.015% + 10 mV 0.5 V/µs

2410, 2410-C

200.000 mV 5 µV 0.02% + 600 µV 1 µV 0.012% + 300 µV

±21 V @ ±1.05 A

±1100 V @ ±21 mA

2.00000 V 50 µV 0.02% + 600 µV 10 µV 0.012% + 300 µV

20.0000 V 500 µV 0.02% + 2.4 mV 100 µV 0.015% + 1 mV 0.15 V/µs

1000.00 V 50 mV 0.02% + 100 mV 10 mV 0.015% + 50 mV 0.5 V/µs

2420, 2420-C

200.000 mV 5 µV 0.02% + 600 µV 1 µV 0.012% + 300 µV

±21 V @ ±3.15 A

±63 V @ ±1.05 A

2.00000 V 50 µV 0.02% + 600 µV 10 µV 0.012% + 300 µV

20.0000 V 500 µV 0.02% + 2.4 mV 100 µV 0.015% + 1 mV 0.08 V/µs

60.0000 V 1.5 mV 0.02% + 7.2 mV 1 mV 0.015% + 3 mV 0.14 V/µs

2425, 2425-C

200.000 mV 5 µV 0.02% + 600 µV 1 µV 0.012% + 300 µV

±21 V @ ±3.15 A

±105 V @ ±1.05 A

2.00000 V 50 µV 0.02% + 600 µV 10 µV 0.012% + 300 µV

20.0000 V 500 µV 0.02% + 2.4 mV 100 µV 0.015% + 1 mV 0.08 V/µs

100.0000 V 2.5 mV 0.02% + 12 mV 1 mV 0.015% + 5 mV 0.25 V/µs

2430, 2430-C

200.000 mV 5 µV 0.02% + 600 µV 1 µV 0.012% + 300 µV ±105 V @ ±1.05 A

±105 V @ ±10.5 A

(pulse mode only)

2.00000 V 50 µV 0.02% + 600 µV 10 µV 0.012% + 300 µV

20.0000 V 500 µV 0.02% + 2.4 mV 100 µV 0.015% + 1 mV 0.08 V/µs

100.0000 V 2.5 mV 0.02% + 12 mV 1 mV 0.015% + 5 mV 0.25 V/µs

2440, 2440-C

200.000 mV 5 µV 0.02% + 600 µV 1 µV 0.012% + 300 µV

±10.5 V @ ±5.25 A

±42 V @ ±1.05 A

2.00000 V 50 µV 0.02% + 600 µV 10 µV 0.012% + 300 µV

10.0000 V 500 µV 0.02% + 1.2 mV 100 µV 0.015% + 750 µV 0.08 V/µs

40.0000 V 5 mV 0.02% + 4.8 mV 1 mV 0.015% + 3 mV 0.25 V/µs

*Not available on Model 2401.

TEMPERATURE COEFFICIENT (0°–18°C and 28°–50°C): ±(0.15 × accuracy specification)/°C.

VOLTAGE REGULATION: Line: 0.01% of range. Load: 0.01% of range + 100µV.

OVER VOLTAGE PROTECTION: User selectable values, 5% tolerance. Factory default = none.

CURRENT LIMIT: Bipolar current limit (compliance) set with single value. Min. 0.1% of range.

OVERSHOOT: <0.1% typical (full scale step, resistive load, 10mA range).

ADDITIONAL SOURCE SPECIFICATIONS (All Models)

TRANSIENT RESPONSE TIME: 30µs minimum for the output to recover to its spec. following a

step change in load.

COMMAND PROCESSING TIME: Maximum time required for the output to begin to change

following the receipt of :SOURce:VOLTage|CURRent <nrf> command. Autorange On: 10ms.

Autorange Off: 7ms.

OUTPUT SETTLING TIME: Time required to reach 0.1% of final value after command is pro-

cessed. 100µs typical. Resistive load. 10µA to 100mA range.

DC FLOATING VOLTAGE: Output can be floated up to ±250VDC (Model 2440 ±40VDC) from

chassis ground.

REMOTE SENSE: Up to 1V drop per load lead.

COMPLIANCE ACCURACY: Add 0.3% of range and ±0.02% of reading to base specification.

OVER TEMPERATURE PROTECTION: Internally sensed temperature overload puts unit in

standby mode.

RANGE CHANGE OVERSHOOT: Overshoot into a fully resistive 100kW load, 10Hz to 1MHz BW,

adjacent ranges: 100mV typical, except 20V/200V (20V/60V on Model 2420), 20V/100V on Model

2425 and 2430, range boundary, and Model 2440.

MINIMUM COMPLIANCE VALUE: 0.1% of range.

ADDITIONAL PULSE MODE SOURCE SPECIFICATIONS

(2430 and 2430-C only)

MAXIMUM DUTY CYCLE: 8%, hardware limited, 10A range only. All other ranges 100%.

MAXIMUM PULSE WIDTH: 5ms from 90% rising to 90% falling edge, 2.5ms 10A range.

MINIMUM PULSE WIDTH: 150µs.

MINIMUM PULSE RESOLUTION: 50µs typical, 70µs max., limited by system jitter.

SOURCE ACCURACY: Determined by settling time and source range specifications.

OUTPUT SETTLING TIME 0.1%:

800µs typ., source I = 10A into 10W, limited by voltage slew rate.

500µs typ., source I = 10A into 1W, limited by voltage slew rate.

OUTPUT SLEW RATE:

Voltage (10W load): 0.25V/µs ±30% on 100V range. 0.08V/µs ±30% on 20V range, 10A range.

Current (0W load): 0.25A/µs ±30% on 100V range. 0.08A/µs ±30% on 20V range, 10A range.

NOTES

1. 2400, 2401, 2410 Only: Specifications valid for continuous output currents below 105mA. For operation above

105mA continuous for >1 minute, derate accuracy 10%/35mA above 105mA.

2. Speed = Normal (1 PLC). For 0.1 PLC, add 0.005% of range to offset specifications, except 200mV, 1A, 10A

ranges, add 0.05%. For 0.01 PLC, add 0.05% of range to offset specifications, except 200mV, 1A, 10A ranges, add

0.5%.

3. Accuracies apply to 2- or 4-wire mode when properly zeroed.

4. In pulse mode, limited to 0.1 PLC measurement.

Series 2400 SourceMeter® SMU Instruments

Series 2400 condensed specifications

SMU INSTRUMENTS

A Greater Measure of Conﬁdence

www.keithley.com

1.888.KEITHLEY (U.S. only)

Current Accuracy (Local or Remote Sense)

Model Range

Programming

Resolution

Source 1, 3

Accuracy

(1 Year)

23°C ±5°C

±(% rdg. + amps)

Default Measurement

Resolution

Measurement 5, 6, 7

Accuracy (1 Year)

23°C ±5°C

±(% rdg. + amps) Source/Sink Limit

2400, 2400-C,

2401

1.00000 µA 50 pA 0.035% + 600 pA 10 pA 0.029% + 300 pA

±1.05A @ ±21 V

±105 mA @ ±210 V8

10.0000 µA 500 pA 0.033% + 2 nA 100 pA 0.027% + 700 pA

100.000 µA 5 nA 0.031% + 20 nA 1 nA 0.025% + 6 nA

1.00000 mA 50 nA 0.034% + 200 nA 10 nA 0.027% + 60 nA

10.0000 mA 500 nA 0.045% + 2 µA 100 nA 0.035% + 600 nA

100.000 mA 5 µA 0.066% + 20 µA 1 µA 0.055% + 6 µA

1.00000 A2 50 µA 0.27 % + 900 µA 10 µA 0.22 % + 570 µA

2410, 2410-C

1.00000 µA 50 pA 0.035% + 600 pA 10 pA 0.029% + 300 pA

±1.05A @ ±21 V

±21 mA @ ±1100 V

10.0000 µA 500 pA 0.033% + 2 nA 100 pA 0.027% + 700 pA

100.000 µA 5 nA 0.031% + 20 nA 1 nA 0.025% + 6 nA

1.00000 mA 50 nA 0.034% + 200 nA 10 nA 0.027% + 60 nA

20.0000 mA 500 nA 0.045% + 4 µA 100 nA 0.035% + 1.2 µA

100.000 mA 5 µA 0.066% + 20 µA 1 µA 0.055% + 6 µA

1.00000 A2 50 µA 0.27 % + 900 µA 10 µA 0.22 % + 570 µA

2420, 2420-C

10.0000 µA 500 pA 0.033% + 2 nA 100 pA 0.027% + 700 pA

±3.15A @ ±21 V

±1.05 A @ ±63 V

100.000 µA 5 nA 0.031% + 20 nA 1 nA 0.025% + 6 nA

1.00000 mA 50 nA 0.034% + 200 nA 10 nA 0.027% + 60 nA

10.0000 mA 500 nA 0.045% + 2 µA 100 nA 0.035% + 600 nA

100.000 mA 5 µA 0.066% + 20 µA 1 µA 0.055% + 6 µA

1.00000 A2 50 µA 0.067% + 900 µA 10 µA 0.066% + 570 µA

3.00000 A2 50 µA 0.059% + 2.7 mA 10 µA 0.052% + 1.71 mA

2425, 2425-C

10.0000 µA 500 pA 0.033% + 2 nA 100 pA 0.027% + 700 pA

±3.15A @ ±21 V

±1.05 A @ ±105 V

100.000 µA 5 nA 0.031% + 20 nA 1 nA 0.025% + 6 nA

1.00000 mA 50 nA 0.034% + 200 nA 10 nA 0.027% + 60 nA

10.0000 mA 500 nA 0.045% + 2 µA 100 nA 0.035% + 600 nA

100.000 mA 5 µA 0.066% + 20 µA 1 µA 0.055% + 6 µA

1.00000 A2 50 µA 0.067% + 900 µA 10 µA 0.060% + 570 µA

3.00000 A2 50 µA 0.059% + 2.8 mA 10 µA 0.052% + 1.71 mA

2430, 2430-C

10.0000 µA 500 pA 0.033% + 2 nA 100 pA 0.027% + 700 pA

±1.05A @ ±105 V

±10.5 A @ ±105 V

(pulse mode only)

100.000 µA 5 nA 0.031% + 20 nA 1 nA 0.025% + 6 nA

1.00000 mA 50 nA 0.034% + 200 nA 10 nA 0.027% + 60 nA

10.0000 mA 500 nA 0.045% + 2 µA 100 nA 0.035% + 600 nA

100.000 mA 5 µA 0.066% + 20 µA 1 µA 0.055% + 6 µA

1.00000 A 50 µA 0.067% + 900 µA 10 µA 0.060% + 570 µA

3.00000 A2

10.00000 A4

500 µA

0.059% + 2.8 mA

0.089% + 5.9 mA

10 µA

0.052% + 1.71 mA

0.082% + 1.71 mA

2440, 2440-C

10.0000 µA 500 pA 0.033% + 2 nA 100 pA 0.027% + 700 pA

±5.25A @ ±10.5 V

±1.05 A @ ±42 V

100.000 µA 5 nA 0.031% + 20 nA 1 nA 0.025% + 6 nA

1.00000 mA 50 nA 0.034% + 200 nA 10 nA 0.027% + 60 nA

10.0000 mA 500 nA 0.045% + 2 µA 100 nA 0.035% + 600 nA

100.000 mA 5 µA 0.066% + 20 µA 1 µA 0.055% + 6 µA

1.00000 A 50 µA 0.067% + 900 µA 10 µA 0.060% + 570 µA

5.00000 A 50 µA 0.10 % + 5.4 mA 10 µA 0.10 % + 3.42 mA

TEMPERATURE COEFFICIENT (0°–18°C and 28°–50°C): ±(0.15 × accuracy specification)/°C.

CURRENT REGULATION: Line: 0.01% of range. Load: 0.01% of range (except Model 2440

5A range 0.05%) + 100pA.

VOLTAGE LIMIT: Bipolar voltage limit (compliance) set with single value. Min. 0.1% of range.

OV ERSHOOT: <0.1% typical (1mA step, RL = 10kW, 20V range for Model 2400, 2401, 2410, 2420,

2425, 2430), (10V range for Model 2440).

CONTACT CHECK SPECIFICATIONS (requires -C version)

(Not available for Model 2401)

SPEED: 350µs for verification and notification.

CONTACT CHECK: 2 W 15 W 50 W

No contact check failure <1.00 W <13.5 W <47.5 W

Always contact check failure >3.00 W >16.5 W >52.5 W

NOTES

1. 2400, 2401, 2410 Only: Specifications valid for continuous output currents below 105mA. For operation above

105mA continuous for >1 minute, derate accuracy 10%/35mA above 105mA.

2. Full operation (1A) regardless of load to 30°C (50°C for Model 2420 and 2440). Above 30°C (50°C for Model

2420 and 2440) ambient, derate 35mA/°C and prorate 35mA/W load. 4-wire mode. For current sink operation

on 1A, 3A, or 5A ranges, maximum continuous power is limited to approximately 1/2 rated power or less,

depending on current, up to 30°C ambient. See power equations in the User’s Manual to calculate allowable

duty cycle for specific conditions.

3. For sink mode, 1µA to 100mA range, accuracy is:

Model 2400, 2401: ±(0.15% + offset*4). Models 2410, 2420, 2425, 2430, 2440: ±(0.5% + offset*3).

For 1A range, accuracy is:

Model 2400, 2401: ±(1.5% + offset*8). Models 2410, 2420, 2425, 2430, 2440: ±(1.5% + offset*3).

4. 10A range only in pulse mode. Limited to 2.5ms pulse width maximum. 10% duty cycle maximum.

5. Speed = Normal (1 PLC). For 0.1 PLC, add 0.005% of range to offset specifications, except 200mV, 1A, 10A

ranges, add 0.05%. For 0.01 PLC, add 0.05% of range to offset specifications, except 200mV, 1A, 10A ranges,

add 0.5%.

6. Accuracies apply to 2- or 4-wire mode when properly zeroed.

7. In pulse mode, limited to 0.1 PLC measurement.

8. Model 2400 and 2400-C only.

Series 2400 SourceMeter® SMU Instruments

Series 2400 condensed specifications

SMU INSTRUMENTS

www.keithley.com

1.888.KEITHLEY (U.S. only)

A Greater Measure of Conﬁdence

NOTES

1. Speed = Normal (1 PLC). For 0.1 PLC, add 0.005% of range to offset specifications, except 200mV, 1A, 10A ranges, add 0.05%. For

0.01 PLC, add 0.05% of range to offset specifications, except 200mV, 1A, 10A ranges, add 0.5%.

2. Accuracies apply to 2- or 4-wire mode when properly zeroed.

3. Manual ohms only – except 2420, 2425, 2430, 2440 for 2W range and 2400, 2401, or 2410 for 200MW range.

4. Source readback enabled, offset compensation ON. Also available on 2410, 2420, 2425, 2430, and 2440 with similar accuracy

enhancement.

5. In pulse mode, limited to 0.1 PLC measurement.

6. Except 2440; default test current is 5µA.

7. Except 2440; default test current is 0.5µA.

TEMPERATURE COEFFICIENT (0°–18°C and 28°–50°C): ±(0.15 × accuracy

specification)/°C.

SOURCE I MODE, MANUAL OHMS: Total uncertainty = I source accuracy + V meas-

ure accuracy (4-wire remote sense).

SOURCE V MODE, MANUAL OHMS: Total uncertainty = V source accuracy + I meas-

ure accuracy (4-wire remote sense).

6-WIRE OHMS MODE: Available using active ohms guard and guard sense. Max.

Guard Output Current: 50mA (except 1A range). Accuracy is load dependent.

Refer to White Paper no. 2033 for calculation formula.

GUARD OUTPUT IMPEDANCE: <0.1W in ohms mode.

Series 2400 SourceMeter® SMU Instruments

SERVICES AVAILABLE

2400-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

2400-C-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

2401-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

2410-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

2410-C-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

2420-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

2420-C-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

2425-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

2425-C-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

2430-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

2430-C-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

2440-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

2440-C-3Y-EW 1-year factory warranty extended to 3 years from date of shipment

C/2400-3Y-ISO 3 (ISO-17025 accredited) calibrations within 3 years of purchase for Models 2400, 2400-C, 2400-LV*

C/2401-3Y-ISO 3 (ISO-17025 accredited) calibrations within 3 years of purchase for Model 2401*

C/2410-3Y-ISO 3 (ISO-17025 accredited) calibrations within 3 years of purchase for Models 2410, 2410-C*

C/2420-3Y-ISO 3 (ISO-17025 accredited) calibrations within 3 years of purchase for Models 2420, 2420-C*

C/2425-3Y-ISO 3 (ISO-17025 accredited) calibrations within 3 years of purchase for Models 2425, 2425-C*

C/2430-3Y-ISO 3 (ISO-17025 accredited) calibrations within 3 years of purchase for Models 2430, 2430-C*

C/2440-3Y-ISO 3 (ISO-17025 accredited) calibrations within 3 years of purchase for Models 2440, 2440-C*

TRN-2400-1-C Course: Unleashing the Power of Your SourceMeter SMU Instrument

*Not available in all countries

Resistance Measurement Accuracy (Local or Remote Sense)1, 2, 5

Range

Default

Resolution

Default Test

Current

2400, 2401, 2410

Default Test

Current

2420, 2425,

2430, 2440

Normal Accuracy (23°C ±5°C)

1 Year, ±(% rdg. + ohms)

Enhanced Accuracy

(23°C ±5°C)4

1 Year, ±(% rdg. + ohms)

2400, 2401 2410 2420, 2425, 2430, 2440 2400, 2401

<0.20000 W3– – – Source IACC + Meas. VACC Source IACC + Meas. VACC Source IACC + Meas. VACC Source IACC + Meas. VACC

2.00000 W310 µW–1 A Source IACC + Meas VACC Source IACC + Meas. VACC 0.17% + 0.0003 WSource IACC + Meas. VACC

20.0000 W100 µW100 mA 100 mA 0.10% + 0.003 W0.11% + 0.006 W0.10% + 0.003 W0.07% + 0.001 W

200.000 W1 mW10 mA 10 mA 0.08% + 0.03 W0.09% + 0.1 W0.08% + 0.03 W0.05% + 0.01 W

2.00000 kW10 mW1 mA 1 mA 0.07% + 0.3 W0.08% + 0.6 W0.07% + 0.3 W0.05% + 0.1 W

20.0000 kW100 mW100 µA 100 µA 0.06% + 3 W0.07% + 6 W0.06% + 3 W0.04% + 1 W

200.000 kW 1 W10 µA 10 µA 0.07% + 30 W0.07% + 60 W0.07% + 30 W0.05% + 10 W

2.00000 MW6 10 W1 µA 1 µA 0.11% + 300 W0.12% + 600 W0.11% + 300 W0.05% + 100 W

20.0000 MW7 100 W1 µA 1 µA 0.11% + 1 kW0.12% + 2.4 kW0.11% + 1 kW0.05% + 500 W

200.000 MW31 kW100 nA –0.66% + 10 kW0.66% + 24 kWSource IACC + Meas. VACC 0.35% + 5 kW

>200.000 MW3– – – Source IACC + Meas. VACC Source IACC + Meas. VACC Source IACC + Meas. VACC Source IACC + Meas. VACC

Series 2400 condensed specifications

SMU INSTRUMENTS

A Greater Measure of Conﬁdence

www.keithley.com

1.888.KEITHLEY (U.S. only)

GENERAL

System Speeds

MEASUREMENT1

MAXIMUM RANGE CHANGE RATE: 75/second.

MAXIMUM MEASURE AUTORANGE TIME: 40ms (fixed source).2

Sweep Operation3 Reading Rates (rdg./second) for 60Hz (50Hz):

Measure Source-Measure

Source-Measure5

Pass/Fail Test4, 5 Source-Memory4

Speed NPLC/Trigger Origin To Mem. To GPIB To Mem. To GPIB To Mem. To GPIB To Mem. To GPIB

Fast 0.01 / internal 2081 (2030) 1754 1551 (1515) 1369 902 (900) 981 165 (162) 165

IEEE-488.1 Mode 0.01 / external 1239 (1200) 1254 1018 (990) 1035 830 (830) 886 163 (160) 163

Fast 0.01 / internal 2081 (2030) 1198 (1210) 1551 (1515) 1000 (900) 902 (900) 809 (840) 165 (162) 164 (162)

IEEE-488.2 Mode 0.01 / external 1239 (1200) 1079 (1050) 1018 (990) 916 (835) 830 (830) 756 (780) 163 (160) 162 (160)

Medium 0.10 / internal 510 (433) 509 (433) 470 (405) 470 (410) 389 (343) 388 (343) 133 (126) 132 (126)

IEEE-488.2 Mode 0.10 / external 438 (380) 438 (380) 409 (360) 409 (365) 374 (333) 374 (333) 131 (125) 131 (125)

Normal 1.00 / internal 59 (49) 59 (49) 58 (48) 58 (48) 56 (47) 56 (47) 44 (38) 44 (38)

IEEE-488.2 Mode 1.00 / external 57 (48) 57 (48) 57 (48) 57 (47) 56 (47) 56 (47) 44 (38) 44 (38)

Single Reading Operation Reading Rates (rdg./second) for 60Hz (50Hz):

Speed NPLC/Trigger Origin

Measure

To GPIB

Source-Measure5

To GPIB

Source-Measure Pass/Fail Test4,5

To GPIB

Fast (488.1) 0.01 / internal 537 140 135

Fast (488.2) 0.01 / internal 256 (256) 79 (83) 79 (83)

Medium (488.2) 0.10 / internal 167 (166) 72 (70) 69 (70)

Normal (488.2) 1.00 / internal 49 (42) 34 (31) 35 (30)

Component for 60Hz (50Hz):4, 6

Speed NPLC/Trigger Origin Measure To GPIB Source Pass/Fail Test

Source-Measure Pass/Fail Test5, 7

To GPIB

Fast 0.01 / external 1.04 ms (1.08 ms) 0.5 ms (0.5 ms) 4.82 ms (5.3 ms)

Medium 0.10 / external 2.55 ms (2.9 ms) 0.5 ms (0.5 ms) 6.27 ms (7.1 ms)

Normal 1.00 / external 17.53 ms (20.9 ms) 0.5 ms (0.5 ms) 21.31 ms (25.0 ms)

1 Reading rates applicable for voltage or current measurements. Auto zero off, autorange off, filter off, display off,

trigger delay = 0, and binary reading format.

2 Purely resistive lead. 1µA and 10µA ranges <65ms.

3 1000 point sweep was characterized with the source on a fixed range.

Pass/Fail test performed using one high limit and one low math limit.

5 Includes time to re-program source to a new level before making measurement.

6 Time from falling edge of START OF TEST signal to falling edge of END OF TEST signal.

7 Command processing time of :SOURce:VOLTage|CURRent:TRIGgered <nrf> command not included.

Noise Rejection:

NPLC NMRR CMRR

Fast 0.01 —80 dB

Medium 0.1 —80 dB

Slow 160 dB 100 dB1

1 Except lowest 2 current ranges = 90dB.

LOAD IMPEDANCE: Stable into 20,000pF typical.

COMMON MODE VOLTAGE: 250V DC (40V DC for Model 2440).

COMMON MODE ISOLATION: >109W, <1000pF.

OVERRANGE: 105% of range, source and measure.

MAX. VOLTAGE DROP BETWEEN INPUT/OUTPUT AND SENSE TERMINALS: 5V.

MAX. SENSE LEAD RESISTANCE: 1MW for rated accuracy.

SENSE INPUT IMPEDANCE: >1010W.

GUARD OFFSET VOLTAGE: <150µV, typical (300µV for Models 2430, 2440).

SOURCE OUTPUT MODES:

Pulse (Model 2430 only)

Fixed DC level

Memory List (mixed function)

Stair (linear and log)

MEMORY BUFFER: 5,000 readings @ 5 digits (two 2,500 point buffers). Includes selected measured

value(s) and time stamp. Lithium battery backup (3 yr+ battery life).

SOURCE MEMORY LIST: 100 points max.

PROGRAMMABILITY: IEEE-488 (SCPI-1995.0), RS-232, 5 user-definable power-up states plus

factory default and *RST.

DIGITAL INTERFACE:

Interlock: Active low input.

Handler Interface: Start of test, end of test, 3 category bits. +5V@ 300mA supply.

Not available on Model 2401.

Digital I/O: 1 trigger input, 4 TTL/Relay Drive outputs (33V @ 500mA, diode clamped).

Not available on Model 2401.

POWER SUPPLY: 100V to 240V rms, 50–60Hz (automatically detected at power up). Model

2400, 2401: 190VA. Model 2410: 210VA. Model 2420: 220VA. Model 2425, 2430: 250VA.

Model 2440: 240VA.

COOLING: Model 2401: Convection. Model 2410, 2420, 2425, 2430, 2440: Forced air,

variable speed.

EMC: Conforms to European Union Directive 89/336/EEC, EN 61326-1.

SAFETY: UL listed to UL 61010B-1:2003: Conforms to European Union Low Voltage Directive.

VIBRATION: MIL-PRF-28800F Class 3 Random.

WARM-UP: 1 hour to rated accuracies.

DIMENSIONS: 89mm high × 213mm wide × 370mm deep (3½ in × 83⁄8 in × 149⁄16 in). Bench

Configuration (with handle and feet):104mm high × 238mm wide × 370mm deep (41⁄8 in ×

93⁄8 in × 149⁄16 in).

WEIGHT: 3.21kg (7.08 lbs) (Model 2425, 2430, 2440: 4.1kg, 9.0 lbs).

ENVIRONMENT: Operating: 0°–50°C, 70% R.H. up to 35°C. Derate 3% R.H./°C, 35°–50°C.

Storage: –25°C to 65°C.

Series 2400 SourceMeter® SMU Instruments

NOTES

Series 2400 condensed specifications