4.0 Amps Single Phase Full Wave Bridge Rectifier
IO(AV) = 4A
VRRM = 50/ 800V
4GBL Series
1
Bulletin I2716 rev. F 06/03
www.irf.com
Description
These GBL Series of Single Phase Bridges consist
of four glass passivated silicon junction connected
as a Full Wave Bridge. These four junctions are
encapsulated by plastic molding technique. These
Bridges are mainly used in Switch Mode power
supply and in industrial and consumer equipment.
Parameters 4GBL Units
Major Ratings and Characteristics
IO4A
@ TC50 °C
IFSM @ 50Hz 150 A
@ 60Hz 158 A
I2t @ 50Hz 113 A2s
@ 60Hz 104 A2s
VRRM range 50 to 800 V
TJ- 55 to 150 oC
4GBL
Features
Diode chips are glass passivated
Easy to assemble & install on P.C.B.
High Surge Current Capability
High Isolation between terminals and molded case (1500 VRMS)
Lead free terminals solderable as per MIL-STD-750 Method 2026
Terminals suitable for high temperature soldering at 260°C for 8-10 secs
UL E160375 approved
4GBL Series
2
Bulletin I2716 rev. F 06/03
www.irf.com
IOMaximum DC output current 4 A TC = 50°C, Resistive & inductive load
3.2 TC = 50°C, Capacitive load
IFSM Maximum peak, one-cycle 150 t = 10ms, 20ms
non-repetitive surge current,
following any rated load condition 158 t = 8.3ms, 16.7ms TJ = 150°C
and with rated VRRM reapplied
I2t Maximum I2t for fusing, 113 A2s t = 10ms
initial TJ = TJ max 104 t = 8.3ms
VFM Maximum peak forward voltage 0.975 V TJ = 25 oC, IFM = 4A
per diode
IRM Typical peak reverse leakage 5 µA TJ = 25 oC, 100% VRRM
curren t per diode
VRRM Maximum repetitive peak 50 to 800 V
reverse voltage range
Forward Conduction
Voltage VRRM, max repetitive VRMS, maximum VRSM, max non-repetitive IRRM max. IRRM max.
Type number Code peak rev. voltage RMS voltage reverse voltage @ rated VRRM @ rated VRRM
TJ = TJ max. TJ = TJ max. TJ = TJ max. TJ = 25°C TJ = 150°C
VV VµAµA
4GBL 005 50 35 75 5 400
01 100 70 150 5 400
02 200 140 275 5 400
04 400 280 500 5 400
06 600 420 725 5 400
08 800 560 900 5 400
ELECTRICAL SPECIFICATIONS
Voltage Ratings
Parameters 4GBL Unit Conditions
TJOperating and storage -55 to 150 oC
Tstg temperature range
RthJC Max. thermal resistance 6.5 °C/ W DC rated current through bridge (1)
junction to case
RthJA Thermal resistance, 22 °C/ W DC rated current through bridge (1)
junction to ambient
W Approximate weight 2 (0.07) g (oz)
Thermal and Mechanical Specifications
Parameters 4GBL Unit Conditions
Note (1): Devices mounted on 75 x 75 x 3 mm aluminum plate
4GBL Series
3
Bulletin I2716 rev. F 06/03
www.irf.com
1- Bridge current
2- Basic Part Number
3- Voltage Code: code x 100 = VRRM
4 GBL 08
123
Ordering Information Table
Device Code
Outline Table
All dimensions are in millimetres
4GBL Series
4
Bulletin I2716 rev. F 06/03
www.irf.com
Fig. 2 - Forward Voltage Drop Characteristics
Fig. 1 - Current Ratings Characteristics
Fig. 4 - Maximum Non-Repetitive Surge Current
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
Maximum Allowable Case Temperature (°C)
Average Forward Current (A)
Number of Equal Amplitude Half Cycle Current Pulses (N)
Peak Half Sine Wave Forward Current (A)
Fig. 3 - Total Power Loss Characteristics
Maximum Average Forward Power Loss (W)
Average Forward Current (A)
20
40
60
80
100
120
140
160
012345
180˚
(Sine)
180˚
(Rect)
4GBL Series
40
60
80
100
120
140
160
1 10 100
At Any Rated Load Condition And With
Rated Vrrm Applied Following Surge.
Initial Tj = 150˚C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
4GBL Series
0.1
1
10
100
1000
0 0.5 1 1.5 2 2.5 3 3.5
T = 25˚C
J
T = 150˚C
J
4GBL Series
0
1
2
3
4
5
6
7
01234
180˚
(Sine)
180˚
(Rect)
4GBL Series
T = 150˚C
J
4GBL Series
5
Bulletin I2716 rev. F 06/03
www.irf.com
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 06/03
Data and specifications subject to change without notice.
This product has been designed and qualified for Multiple Level.
Qualification Standards can be found on IR's Web site.