10 9 8 7 6 5 4 3 2 1 4 DIGIT DATE CODE MUST. BE SOLVENT RESISTANT A NOTES: r I.) MATERIALS: B HOUSING - LCP, 94V-0, BLACK TERMINAL - PHOS. BRONZE ALLOY \ 7 CKT 1 2.) 8 CKT SHOWN FOR ILLUSTRATION PURPOSES. TTY TTIAI SEE CHART ON SHEET 7 FOR OTHER SIZES. i 3.) SCRATCHES AND BURNISHING ALLOWED ON _ -266+.0 10 TERMINAL TAILS PROVIDING BASE METAL (6.76+0.25) IS NOT EXPOSED, EXECPT AT TRIMMED END. ) 4.) RECOMMENDED MATING PIN LENGTHS: LLLL LL Lf " LOWER ROW - .200' MIN./.285" MAX. UPPER ROW - .200" MIN. | 5.) REFER TO PS-71973-9999 FOR PERFORMANCE DATA. {/ Z Li ff l PLATING: I5 GOLD 15 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC q TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. YW 30 GOLD 30 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. 50 GOLD 50 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT 310 AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC Cc (7.87) TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. D *THE PRIMARY SHIPPING CARTON WILL BE LABELED "COMPLIANT TO 4B RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX II OF DIRECTIVE 2000/53/EC'. I a0 49) 1 CARTONS WITHOUT THIS LABEL MAY CONTAIN PRODUCT WITH LEAD. __ q | i} {| SECTION Z-Z 265, (4.19) -0624.002 6.73) (1.57 0.05) c _-__ 360 _, 0345 (9.14) 44 120 (3.05) \ EDGE OF P.C.B. REF. (8.76) [_ .135 U U U ~ (3.43) 100 1 r1 oS (2.54) UW u i ok 5 RECOMMENDED P.C.B. LAYOUT 6 OPTION A ASSEMBLY in (ASSEMBLY WITH PEG AND WITHOUT LOWER ROW PINSTOP ) } z WwW s Ss a QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE 4 S82) |sympois| (UNLESS SPECIFIED) IN/MM NTS INCH Cl pROECTION | ao = = = mm INCH DRAWN BY DATE TITLE im <28lZ\W-0 PLACES|E--- _[z--- DIB 1995/03/15 SMT RECEPTACLE ne = 3 PLACES|---__|--- _|CHECKED BY DATE RIGHT ANGLE, DUAL ROW Ye &\\7-0 [2PLACES|--- [01 JB 1995/03/15 WITH AND WITHOUT PEG Sw wlw 1PLACE [0.25 |+--- APPROVED BY DATE A Hasse ANGULAR 1/2 LONG 2012/04/25 fold MOLEX INCORPORATED Nes = a = MATERIAL NO. DOCUMENT NO. SHEET NO. Ho 2ee DRAFT WHERE APPLICABLE] SEE TABLE SD-71979-001 1 OF 2 Ooo wT bE es SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H3 |g JA SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 3 7 6 5 | 4 | 3 | 2 1 Rev. E 2006/04/1540 9 | 7 | 6 5 4 3 | 2 4 NO. OF OPTION A ASSEMBLY DIMENSION NO. OF OPTION A ASSEMBLY DIMENSION CKTS PLATINGS PER ES-88-(##s) CKTS PLATINGS PER ES-88-(###) (SEE SHEET | FOR PLATING SPECIFICATIONS) (SEE SHEET | FOR PLATING SPECIFICATIONS) PER PER Row | TOTAL 15 GOLD 30 GOLD 50 GOLD A B Cc Row | TOTAL I5 GOLD 30 GOLD 50 GOLD A B C F 4 8 71979-0204 71979-0304 71979-0404 Pee aon a 34 | 68 71979-0234 71979-0334 71979-0434 aes ae aa 5 | lo 71979-0205 71979-0305 71979-0405 oe {oo 300, 35 | 70 71979-0235 71979-0335 71979-0435 as ae apes 595 | .500 | .400 3.595 | 3.500 | 3.400 6 12 71979-0206 71979-0306 71979-0406 || T5.1p_| (2,70) | (0.16) 36 | 72 71979-0236 71979-0336 71979-0436 |! rsp | (ago) | Gec3e) 7 l4 71979-0207 71979-0307 71979-0407 ee cor ae 8 | 6 71979-0208 71979-0308 71979-0408 a ar ey 9 18 71979-0209 71979-0309 71979-0409 wees ay eo lO | 20 71979-0210 71979-0310 71979-0410 an ao os E [|_l | 22 71979-0211 71979-0311 71979-0411 as ae aa 12 | 24 71979-0212 71979-0312 7 1979-04 l2 aes an oes 13 | 26 71979-0213 71979-0313 71979-0413 aes ane aes 14 | 28 71979-0214 71979-0314 71979-0414 ass ares ae |5 | 30 71979-0215 71979-0315 71979-0415 ares ares ae I6 | 32 71979-0216 71979-0316 TIST9-0416 |! ( ae ae ae 7 | 34 71979-0217 71979-0317 71979-0417 || ae ( aee8. ae 18 | 36 71979-0218 71979-0318 71979-0418 ae aoe aes D I9 | 38 71979-0219 71979-0319 71979-0419 ae ans ae 20 | 40 71979-0220 71979-0320 71979-0420 ae, ( ae as 21 | 42 71979-0221 71979-0321 71979-0421 ae aoe aes 22 | 44 71979-0222 71979-0322 71979-0422 es es a Eee 23 | 46 71979-0223 71979-0323 71979-0423 Ae ER as 24 | 48 71979-0224 71979-0324 71979-0424 AS ae es 25 | 50 71979-0225 71979-0325 71979-0425 aS Ae ex C | 26 | 52 71979-0226 71979-0326 71979-0426 we as ae 27 | 54 71979-0227 71979-0327 71979-0427 HS ee ae 28 | 56 71979-0228 71979-0328 71979-0428 ae AS AS 23 | 58 71979-0229 71979-0329 71979-0429 aoe Gape AS 30 | 60 71979-0230 71979-0330 71979-0430 aS as aoe 31 | 62 71979-0231 71979-0331 71979-0431 ax 7 ae ae 32 | 64 71979-0232 71979-0332 71979-0432 ae ane ase B 33 | 66 71979-0233 71979-0333 71979-0433 aes ae ae NOTE: ALL CONNECTORS ARE PACKAGED IN TUBES PER PK-70873-0138 SS] |QuUALITY}| GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS cq HIRD. ANGLE SS) |sympors| (UNLESS SPECIFIED) IN/MM NTS INCH PROJECTION Aas mm INCH _ | DRAWN BY DATE TITLE a L me PRRs W-0 |ZPLACESE=--_[=--- 8 1995/03/15 SMT RECEPTACLE Be iE 3 PLACES [oe exED BY Dare RIGHT ANGLE, DUAL ROW oN S|\/-0 [2 PLAces|--- _[.01 JB 1995/03/15 WITH AND WITHOUT PEG kee SES Wey Ww 1 PLACE 0.25 +--- APPROVED BY DATE A pai aes ANGULAR 172 MLONG zorzioi2s| fee MOLEX INCORPORATED 1 ec = a = MATERIAL NO. DOCUMENT NO. SHEET NO. PS exe DRAFT WHERE APPLICABLE| SEE TABLE SD-71979-001 2 0F 2 een Oo <|_ wT ets | S25] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H3 rd A3 INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 7 6 5 | | 3 | 2 | Rev. E 2006/04/1510 9 8 7 6 5 4 3 2 4 4 DIGIT DATE CODE ON THIS SURFACE. MUST BE SOLVENT : RESISTANT A NOTES: 1.) MATERIALS: B HOUSING - LCP, 94V-0, BLACK TERMINAL - PHOS, BRONZE ALLOY \ 7 CKT 1 2.) 8 CKT SHOWN FOR ILLUSTRATION PURPOSES. aa TAI SEE CHART ON SHEET 7 FOR OTHER SIZES. { ~ 3.) SCRATCHES AND BURNISHING ALLOWED ON .266#.010 TERMINAL TAILS PROVIDING BASE METAL + t (6.76#0.25) IS NOT EXPOSED, EXECPT AT TRIMMED END. 1224 ) 4.) RECOMMENDED MATING PIN LENGTHS: (5.69) LLLLLLLY Lf H LOWER ROW - .200' MIN./.285* MAX. = 4 oH UPPER ROW - .200' MIN. | tL an J 5.) REFER TO PS-71973-9999 FOR PERFORMANCE DATA. (7 ZZZ7 J I PLATING: 120 = I5 GOLD 15 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT (3.05) AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. { = LY 30 GOLD 30 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. 50 GOLD 50 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT 310 AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC C (7.87) TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. *THE PRIMARY SHIPPING CARTON WILL BE LABELED "COMPLIANT TO 413 ROHS DIRECTIVE 2002/95/EC AND ELV ANNEX II OF DIRECTIVE 2000/53/EC'. oz) CARTONS WITHOUT THIS LABEL MAY CONTAIN PRODUCT WITH LEAD. SECTION Z-Z ~ue \ EDGE OF P.C.B. REF. 265 .062#.002_ 6.73) (1.574 0.05) 360 | (9.14) UU a (3.43) 100 2055 (2.54) 1.40) _ RECOMMENDED P.C.B. LAYOUT OPTION A ASSEMBLY (ASSEMBLY WITH PEG AND WITHOUT LOWER ROW PINSTOP ) = S 3s QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE SSS! lsympo_s| (UNLESS SPECIFIED) IN/MM NTS INCH oc PROJECTION 333s mm INCH _| ORAWN BY DATE TITLE + S252 F-0 Places -__ [+-- JB 1995/03/15 SMT RECEPTACLE 8 a 3 PLACES|t--- _|+--- __|SHECKED BY DATE RIGHT ANGLE, DUAL ROW d &I\C/=0 [2 PLACES|+---_[+.01 JB 1995/03/15 WITH AND WITHOUT PEG ne swss|8 1 PLACE [0.25 |--- APPROVED BY DATE Wd Ses ANGULAR +1/2 JB 1995/03/15 iKaldx MOLEX INCORPORATED g SBER MATERIAL NO. DOCUMENT NO. SHEET NO. rte =o DRAFT WHERE APPLICABLE] SEE TABLE SDA-71979-xx%x 1_OF 12 POSS =< WIT? BREN s [SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H2 w A INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T Rev. E 2006/04/15 9 8 7 6 5 | 4 | 3 | 2 110 9 8 7 6 5 4 3 2 4 4 DIGIT DATE CODE : ON THIS SURFACE. NOTES: MUST BE SOLVENT A 1) MATERIALS: RESISTANT HOUSING - LCP, 94V-0, BLACK F TERMINAL - PHOS, BRONZE ALLOY 2.) 8 CKT SHOWN FOR ILLUSTRATION PURPOSES. \ Ye la CKT 1 SEE CHART ON SHEET 8 FOR OTHER SIZES. 1 1 | | A 7 [Zl 3.) SCRATCHES AND BURNISHING ALLOWED ON ERMINAL TAILS PROVIDING BASE METAL -2662.010 1 NOT EXPOSED. (6.76#0.25) 4.) RECOMMENDED MATING PIN LENGHTS: Ul LOWER ROW - .200" MIN./.250'MAX. 224 on GET LILLILLL pn UPPER ROW - -200* MIN: (5.69) a | 5.) REFER TO PS-71973-9999 FOR PERFORMANCE -P .042 (ALL Lyf? PLATING: co I5 GOLD 15 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC q TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. 30 GOLD 30 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT CKT 2 WZ AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC Ya TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. 310 50 GOLD 50 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT (7aT) AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC c . TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. 413 *THE PRIMARY SHIPPING CARTON WILL BE LABELED "COMPLIANT TO D F (10.49) 1 RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX IT OF DIRECTIVE 2000/53/EC, . CARTONS WITHOUT THIS LABEL MAY CONTAIN PRODUCT WITH LEAD. 120 (3.05) SECTION Y-Y 165 100 (4.19) R54 \ EDGE OF P.C.B. REF. 2265 C 345 C~ i H U 4 te @ 6.19) a 76) iq TL L}--t} 00 050 oss Lao 54) 27) B OPTION B_ASSEMBLY RECOMMENDED P.C.B. LAYOUT (ASSEMBLY WITH PEG AND LOWER ROW PINSTOP ) ==) JQuALTyY| GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS HIRD ANGLE SSS leympo.s| (UNLESS SPECIFIED) IN/MM NTS cH =| OCI SARE ANCL | sss mm INCH _ | ORAWN BY DATE TITLE + S252 F-0 Places -__ [+-- JB 1995/03/15 SMT RECEPTACLE s a 3 PLACES|4--- _|+--- _ [CHECKED BY DATE RIGHT ANGLE, DUAL ROW H &I\/=0 [2 PLACESHe--- _|+.01 JB 1995/03/15 WITH AND WITHOUT PEG SB wii 1 PLACE [0.25 |t--- [APPROVED BY DATE A amazes, ANGULAR 1/2 JB 1995/03/15 iKaldx MOLEX INCORPORATED Ys8ss MATERIAL NO. DOCUMENT NO. SHEET NO. us ek DRAFT WHERE APPLICABLE] SEE TABLE SDA-71979-xxxx 2 OF 12 Ori 3 el wT? BREEN s SZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H2 |f VA SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 6 5 | i | 3 | 2 1 Rev. E 2006/04/1540 | 9 | 8 | 7 | 6 | 5 4 3 2 4 B mL LL Po -.--4-+-- woress (2.54) \___ EDGE OF P.C.B. REF. |.) MATERIALS: | I | | HOUSING - LCP, 94V-0, BLACK. F [] TERMINAL - PHOS. BRONZE ALLOY 2) 8 CKT SHOWN FOR ILLUSTRATION PURPOSES. 345 .260 360 SEE CHART ON SHEET 9 FOR OTHER SIZES. (8.76) (6.60) 9.14 3,) SCRATCHES AND BURNISHING ALLOWED ON N | TERMINAL TAILS PROVIDING BASE METAL __| oO tT IS NOT EXPOSED. o Cl [] [] [] 4.) MANUFACTURED DATE CODE WEEK/YEAR. >< > t 5.) RECOMMENDED MATING PIN LENGTHS: S C 100 LOWER ROW - .200" MIN./.285" MAX. - H 2055 (2.54) UPPER ROW - .200" MIN. (1.40) 6.) REFER TO PS-71973-9999 FOR PERFORMANCE DATA. E Ll WU wu PLATING: 4 DIGIT DATE CODE SEE NOTE 4 RECOMMENDED P.C.B. LAYOUT 15 GOLD 15 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. 30 GOLD 30 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT A AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. B 50 GOLD 50 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC D TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. X_ VCKT 1 *THE PRIMARY SHIPPING CARTON WILL BE LABELED "COMPLIANT TO t t 7 TI La RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX II OF DIRECTIVE 2000/53/EC'. io CARTONS WITHOUT THIS LABEL MAY CONTAIN PRODUCT WITH LEAD. .266,010 iN (6.7640.25) \ 224 r{ (5.69) O (2.82) LLLLL LL LL M | mit rt Ay, ry 2042 h | i (1.07 ) (7 / [7 Ziif7T7 ye CT c t = X \ I q CKT 2 _ 310 . (7.87 ) OPTION C ASSEMBLY 413 10.49 B (ASSEMBLY WITHOUT PEG AND LOWER ROW PINSTOP ) ( SECTION X-X = S 3s QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE SSS] |sympo_s| (UNLESS SPECIFIED) IN/MM NTS INCH oc PROJECTION 333s mm INCH _| ORAWN BY DATE |TITLE + S252 F-0 Places -__ [+-- JB 1995/03/15 SMT RECEPTACLE 8 & 3 PLACES|--- _[+--- [CHECKED BY DATE RIGHT ANGLE, DUAL ROW d &I\C/=0 [2 PLACES|+---_[+.01 JB 1995/03/15 WITH AND WITHOUT PEG S guy] 1 PLACE [0.25 |--- [APPROVED BY DATE A Mss ANGULAR +1/2 JB 1995/03/15 iKaldx MOLEX INCORPORATED NS 2 a = MATERIAL NO. DOCUMENT NO. SHEET NO. oes DRAFT WHERE APPLICABLE] SEE TABLE SDA-71979-xxxx 3 OF 12 min SO =| WITH? BREN s [SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H2_ [ JA SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 B 7 6 5 | 4 | 3 | 2 Fi Rev. E 2006/04/1510 | >| si 7 Lei (8.76) 2 100 (2.54) -260 =360 00 B - | \_ EDGE OF P.C.B. REF. | HAD E+ NOTES: I.) MATERIALS: HOUSING - LCP, 94V-0, BLACK TERMINAL - PHOS. BRONZE ALLOY 2.) 8 CKT FOR ILLUSTRATION PURPOSES. SEE CHART ON SHEET 10 FOR OTHER SIZES. 3.) SCRATCHES AND BURNISHING ALLOWED ON TERMINAL TAILS PROVIDING BASE METAL IS NOT EXPOSED. 4.) MANUFACTURED DATE CODE WEEK/YEAR. 5.) RECOMMENDED MATING PIN LENGHTS: LOWER ROW - .200" MIN./.250"MAX. UPPER ROW - .200" MIN. 30 GOLD T1970 < = 058 ' (2.54) Ub U u 4 DIGIT DATE CODE SEE NOTE 4 6.) REFER TO PS-71973-9999 FOR PERFORMANCE DATA. hoo/oo PLATING: 15 GOLD 15 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. 30 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC A TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. 50 GOLD 50 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC B TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. *THE PRIMARY SHIPPING CARTON WILL BE LABELED "COMPLIANT TO W< CKT 1 RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX II OF DIRECTIVE 2000/53/EC". 1 CARTONS WITHOUT THIS LABEL MAY CONTAIN PRODUCT WITH LEAD. 7TITIITII TAL RECOMMENDED P.C.B. LAYOUT .266#.010 + (6.7640.25) WW 770 2 LISILLLL (2.82) ] ZL/////77/ 310 (7.87 ) OPTION D ASSEMBLY 4B f (10.43) 1 (ASSEMBLY WITHOUT PEG AND WITH LOWER ROW PINSTOP ) SECTION W-W = S 3s QUALITY] GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE Sss (UNLESS SPECIFIED) IN/MM NTS INCH Cl pROvECTION ssEs SYMBOLS mm INCH __| DRAWN BY DATE [TITLE ~=55]Z\Wy-0 [Ppiaces-- [2 JB 1995/03/15 SMT RECEPTACLE 8 & 3 PLACES|--- _[+--- [CHECKED BY DATE RIGHT ANGLE, DUAL ROW a &\\/=0 [2PLACES|#- [+01 1B 1995/03/15 WITH AND WITHOUT PEG S guy] 1 PLACE [0.25 |--- [APPROVED BY DATE Mss ANGULAR +1/2 JB 1995/03/15 iKaldx MOLEX INCORPORATED NS 2 a = MATERIAL NO. DOCUMENT NO. SHEET NO. Hoes DRAFT WHERE APPLICABLE) SEE TABLE SDA-71979-xxxx 4 0F 12 min SO =| WIT? BREN s [SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H2_ [ JA SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T Rev. E 2006/04/15 9 8 7 6 5 | 4 | 3 | 2 140 | 9 | 8 | 7 | 6 5 4 3 2 4 NOTES: HOUSING - VECTRA A-I30, 94V-0, BLACK FT| inl inl FT| TERMINAL - PHOS. BRONZE ALLOY 521, 2.) 8 CKT SHOWN FOR ILLUSTRATION PURPOSES. SEE CHART ON SHEET 11 FOR OTHER SIZES. .345 3.) SCRATCHES AND BURNISHING ALLOWED ON (8.76) TERMINAL TAILS PROVIDING BASE METAL WN IS NOT EXPOSED. oO 4.) MANUFACTURED DATE CODE WEEK/YEAR, oO Oo 5.) RECOMMENDED MATING PIN LENGTHS: y ~ : LOWER ROW - .200" MIN./.285" MAX. O>x< oO = UPPER ROW - .200' MIN, r= H 6.) REFER TO PS-71973-9999 FOR PERFORMANCE DATA. | | Ll [] [] [] PLATING: 100 I5 GOLD 15 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT 4 DIGIT DATE CODE 2055 (2.54) AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC SEE NOTE 4 (1.40) TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. 30 GOLD 30 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT RECOMMENDED P.C.B. LAYOUT AREA: 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. k A n 50 GOLD 50 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. 179 *THE PRIMARY SHIPPING CARTON WILL BE LABELED "COMPLIANT TO B (4.55) RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX II OF DIRECTIVE 2000/53/EC". CARTONS WITHOUT THIS LABEL MAY CONTAIN PRODUCT WITH LEAD. CKT 1 Va 144 ory Z (3.66) ZZ ZT al CF un ~ .060 224 rT xq OO .2664,010 et St SHO es eee, TT TTL LL TT on, 7 LX { (0.25) c iW TT] ry] i te 3 YT m\ 2.82) EEL LLL ta BURR SIDE = oS | Va .087 310 042 + je | Ton \ (2.21) (7.87) CKT 2 la , (10.49) . OPTION E ASSEMBLY SECTION V-V (ASSEMBLY WITHOUT PEG OR LOWER ROW PINSTOP, WITH FLANGE ) 2ss QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS Cl THIRD ANGLE SSS] |sympo_s| (UNLESS SPECIFIED) IN/MM NTS INCH PROJECTION sss mm INCH __ | DRAWN BY DATE TITLE + S252 F-0 Places -__ [+-- JB 1995/03/15 SMT RECEPTACLE s a 3 PLACES|+--- _|[+--- __ |CHECKED BY DATE RIGHT ANGLE, DUAL ROW d &I\C/=0 [2 PLACES|+---_[+.01 JB 1995/03/15 WITH AND WITHOUT PEG S wus 1 PLACE [0.25 |[+--- APPROVED BY DATE as ZHZ ee 1995/03/15] '2'8 MOLEX INCORPORATED Yn S 2 a = MATERIAL NO. DOCUMENT NO. SHEET NO. if OS eh DRAFT WHERE APPLICABLE] SEE TABLE SDA-71979-*xxx 5 OF 12 Mei AW SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H2 ig WITHIN DIMENSIONS A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T Rev. E 2006/04/15 9 8 7 6 5 | 4 | 3 | 2 140 | 9 | 8 | 7 | 6 5 4 3 2 4 NOTES: HOUSING - VECTRA A-I30, 94V-0, BLACK TERMINAL - PHOS. BRONZE ALLOY 521. 2.) 8 CKT SHOWN FOR ILLUSTRATION PURPOSES. SEE CHART ON SHEET 12. SCRATCHES AND BURNISHING ALLOWED ON 3. \ TERMINAL TAILS PROVIDING BASE METAL EDGE OF P.C.B. REF. IS NOT EXPOSED, (8.16) 2 ol: tn = +265 4.) MANUFACTURED DATE CODE WEEK/YEAR. 062+.002_ (6.73) 5.) RECOMMENDED MATING PIN LENGTHS: @ LOWER ROW - .200" MIN./.285" MAX. C572 0.05) UPPER ROW - .200" MIN. 6.) REFER TO PS-71973-9999 FOR PERFORMANCE DATA. |_| |_| [| fd ss PLATING: Hh ny TT ee I5 GOLD 15 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT 4 DIGIT DATE CODE AREA: 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC SEE NOTE 4 EL 100 TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. .050 oe i237) (2.54) 30 GOLD 30 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT . AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC Cc TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. A 50 GOLD 50 MICROINCH MINIMUM SELECTIVE GOLD IN THE CONTACT AREA; 75 MICROINCH MINIMUM SELECTIVE TIN IN THE PC RECOMMENDED P.C.B. LAYOUT TAIL AREA OVER 50 MICROINCH MINIMUM NICKEL OVERALL. B AT *THE PRIMARY SHIPPING CARTON WILL BE LABELED "COMPLIANT TO I _ ., (4.55) RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX II OF DIRECTIVE 2000/53/EC'. T 1 224 (Ce) (5.69) [T tT 11970 x< = Poo/oo CARTONS WITHOUT THIS LABEL MAY CONTAIN PRODUCT WITH LEAD. SECTION U-U LLi/J 1777 fal 7 266.010 TIT /// Zh (6.76#0.25) O = (FIIT TTI fT I = s, i 120 (3.05) Uwe pe WZ 310 (7.87 ) Cc 413 ' (10.49) OPTION F ASSEMBLY = Ss QUALITY] GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS HIR NGLE SSS] |sympo_s| (UNLESS SPECIFIED) IN/MM NTS INCH ClpR Ole A ION (ASSEMBLY WITHOUT LOWER ROW PINSTOP, WITH FLANGE AND PEG ) 33s mm INCH _ | ORAWN BY DATE THLE ~=55]Z\Wy-0 [Ppiaces-- [2 JB 1995/03/15 SMT RECEPTACLE 8 & 3 PLACES|--- _[+--- [CHECKED BY DATE RIGHT ANGLE, DUAL ROW a &\\/=0 [2PLACES|#- [+01 1B 1995/03/15 WITH AND WITHOUT PEG Swuylw 4 PLACE [0.25 |+--- APPROVED BY DATE Mss ANGULAR +1/2 JB 1995/03/15 iKaldx MOLEX INCORPORATED Ns 2 a = MATERIAL NO. DOCUMENT NO. SHEET NO. no e<e DRAFT WHERE APPLICABLE] SEE TABLE SDA-71979-xxxx 6 OF 12 fei a =a with? DIMENSIONS aIZE) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H2 y JA SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T Rev. E 2006/04/15 9 8 7 6 5 | 4 | 3 | 2 140 9 8 | 7 | 6 5 4 3 | 2 NO. OF OPTION A ASSEMBLY DIMENSION NO. OF OPTION A ASSEMBLY DIMENSION CKTS PLATINGS PER ES-88-(+##) CKTS PLATINGS PER ES-88-(###) (SEE SHEET | FOR PLATING SPECIFICATIONS) (SEE SHEET | FOR PLATING SPECIFICATIONS) PER PER PER | TOTAL 15 GOLD 30 GOLD 50 GOLD A B C row | POTAL I5 GOLD 30 GOLD 50 GOLD A B C F 4 |8 71979-0204 71979-0304 71979-0404 ier 2 an 34 | 68 TI979-0234 71979-0334 71979-0434 ee ae aa 5 10 71979-0205 71979-0305 71979-0405 wey ae aon 35 | 70 71979-0235 71979-0335 71979-0435 ae ze ae 6 12 71979-0206 71979-0306 71979-0406 war ar we 36 | 72 TI979-0236 71979-0336 71979-0436 eee ax es 7 14 11979-0207 71979-0307 71979-0407 a ce a (18 l6 71979-0208 71979-0308 71979-0408 oer aor ee g 18 71979-0209 71979-0309 TI979-0409 os at ar 10 | 20 71979-0210 71979-0310 TI979-04 10 a a a 1095 | 1.000 | .900 E Il | 22 71979-0211 71979-0311 71979-0411 |! 7-87 | (25.40) | (22.86) 2 | 24 71979-0212 71979-0312 TI979-04 12 as at ae 13 | 26 71979-0213 71979-0313 TI979-04 13 ae ane as l4 | 28 71979-0214 71979-0314 TIST9-04 14 ae aes ane |5 | 30 71979-0215 71979-0315 TI979-0415 aren ae a I6 | 32 71979-0216 71979-0316 TI979-04 16 anes ane ae 7 | 34 71979-0217 71979-0317 TI9T9-O417 |} ee ween. aoe 18 | 36 71979-0218 71979-0318 TI979-04 18 as a ak D I9 | 38 71979-0219 71979-0319 TI979-04 19 ate ae ao 20 | 40 71979-0220 71979-0320 T 1979-0420 ares aes ae 21 | 42 71979-0221 71979-0321 71979-0421 ae ; ae aot 22 | 44 11979-0222 71979-0322 TI979-0422 ee ae Ae 23 | 46 71979-0223 71979-0323 TIS79-0423 aS ae as o 24 | 48 71979-0224 71979-0324 71979-0424 ae ex aR 25 | 50 11979-0225 71979-0325 TI979-0425 aes aS ex C |} 26 | 52 TI979-0226 71979-0326 TI979-0426 awe ae as 27 | 54 11979-0227 71979-0327 TI979-0427 as ae ae 28 | 56 71979-0228 71979-0328 TI979-0428 as AS ae 23 | 58 71979-0229 71979-0329 71979-0429 aes a As 30 | 60 71979-0230 71979-0330 71979-0430 ees ae cars 31 | 62 71979-0231 71979-0331 TI979-0431 ax ; ane ae 32 | 64 11979-0232 71979-0332 TI979-0432 a 98 ae are B 33 | 66 11979-0233 71979-0333 TI979-0433 ae ame ae NOTE: ALL CONNECTORS ARE PACKAGED IN TUBES PER PK-70873-0138 SSS JqQuality] GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS Oc] THIRD. ANGLE SSS (UNLESS SPECIFIED) IN/MM NTS INCH PROJECTION 22 [SYMBOLS "X" INDICATES TOOLING IS NOT AVAILABLE. Sess mm INCH DRAWN BY DATE TITLE SS 52-0 [7 PAcES|E-- [e- JB 1995/03/15 SMT RECEPTACLE 3 a 3 PLACES|t--- |4--~ [CHECKED BY DATE RIGHT ANGLE, DUAL ROW A S|\/=0 [2 PLACES|#=-- _[+.07 JB 1995/03/15 WITH AND WITHOUT PEG Suwywy Ww 4 PLACE [0.25 +--- APPROVED BY DATE an 2uZ|o : A axZHZ a 1995/03/15] '2'8 MOLEX INCORPORATED Yn Sg 2 a = MATERIAL NO. DOCUMENT NO. SHEET NO. Hoes DRAFT WHERE APPLICABLE) SEE TABLE SDA-71979-xxxx 7 OF 12 i Ou =| _ WIT? BREN s [SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H2 w A 3 INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 B 7 6 5 | 4 | 3 | 2 | Rev. E 2006/04/1540 9 8 | 7 | 6 5 4 3 | 2 NO. OF OPTION B ASSEMBLY DIMENSION No. OF OPTION B ASSEMBLY DIMENSION CKTS PLATINGS PER ES-88-(+##) CKTS PLATINGS PER ES-88-(*#) (SEE SHEET | FOR PLATING SPECIFICATIONS) (SEE SHEET | FOR PLATING SPECIFICATIONS) PER PER row | TOTAL 15 GOLD 30 GOLD | 50 GOLD A| B|C row | TOTAL 15 GOLD 30 GOLD | 50 GOLD A| BIC F 3 4 8 71979-1004 71979-1104 71979-1204 eer Oe a0 34 | 68 71979-1034 71979-1134 71878-1234 a ao weet 5 10 71979-1005 71979-1105 71979-1205 ier we Fon 35 | 70 TIST9- 1035 71979-1135 71878-1235 as es a 6 l2 71979-1006 71979-1106 TI979- 1206 wa a oF we 36 | 72 71979-1036 71979-1136 71878-1236 ae a es T l4 71979-1007 TI979- 1107 71979-1207 ee i oO a se 8 16 71979-1008 TI979- 1108 71979-1208 ote aor a 9 18 71979-1009 71979-1109 71979-1209 as oS aor 10 | 20 71979-1010 TI979- 1110 71979-1210 || Ss-o7y ao at E [| ll | 22 71979- 101 TI979- 111 71979-1211 ae ae ae l2 | 24 71979-1012 TI979- 1112 71979-1212 as are, anes 13 | 26 71979-1013 TI979- 1113 71979-1213, es ae or l4 | 28 TI979- 1014 TI979- 1114 7979-1214 aoe. aa aa 15 | 30 71979-1015 TI979- 1115 71979-1215, aes ae aes Ie | 32 71979-1016 TI979- 1116 71979-1216 ae ape ae 7 | 34 71979- IO 17 TI979-1II7 71979-1217 ae aeee. ae IB | 36 71979-1018 TI979- 1118 71979-1218 as a ans D 1.895 | la 1.700 19 | 38 71979-1019 TI979- 1119 71979-1219 || gts) | @s.72y | C3cier 20 | 40 71979-1020 71979-1120 71979-1220 ane. aoe ass 21 | 42 71979-1021 71979-1121 71979-1221 a Ae as 22 | 44 TI979- 1022 TI979- 1122 TI9T9- 1222 es at es 23 | 46 TI979- 1023 TI979- 1123 7979-1223 aS ate ae 24 | 48 TI979- 1024 TI979- 1124 TI9T9- 1224 aes ae ee 25 | 50 TI979- 1025 TI979- 1125 7979-1225 as eS ae 2.595 500 2.400 C | 26 | 52 TI979- 1026 71979-1126 TI979-1226 || G5 gn | (63.50) | (60.96) 27 | 54 71979-1027 TI979- 1127 7979-1227 ae eS as 28 | 56 71979-1028 TI979- 1128 71979-1228 ae as ae 2.895 2.800 2.700 29 | 58 TI979- 1029 71979-1129 71979-1223 || 7353) | Tita | B.58) 30 | 60 71979-1030 71979-1130 71979-1230 as as a 7 31 | 62 71979-1031 71979-1131 71979-1231 ae ae as 3.195 3.100 3.000 32 | 64 TI979- 1032 71979-1132 71979-1232 || Gis | G@a.74 | @e.20). B 33 | 66 71979-1033 TI979- 1133 7979-1233 ae ae ase eats QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE NOTE: ALL CONNECTORS ARE PACKAGED IN TUBES PER PK-70873-0138 aan SSS) |sympo_ts| (UNLESS SPECIFIED) IN/MM NTS INCH Od PROJECTION _}j RAN "X" INDICATES TOOLING IS NOT AVAILABLE. sss mm INCH _| ORAWN BY DATE TITLE SS 52-0 [7 PAcES|E-- [e- JB 1995/03/15 SMT RECEPTACLE 8 & 3 PLACES|t--- _[+--- _ [CHECKED BY DATE RIGHT ANGLE, DUAL ROW a &I\/=0 [2 PLACESHe--- _|+.01 JB 1995/03/15 WITH AND WITHOUT PEG Swwy/wW 4 PLACE fa 0.25 +--- APPROVED BY DATE an 2uZ|o : , axZe2 a 1995/03/15] '2'8 MOLEX INCORPORATED 2 Sg 2 a = MATERIAL NO. DOCUMENT NO. SHEET NO. Hoe te DRAFT ERE AT ICABLE SEE TABLE SDA-71979-xxxx 8 OF 12 fei a =a WITHIN DIMENSIONS SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H2 uw A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 B 7 6 5 | 4 | 3 | 2 4 Rev. E 2006/04/1540 8 7 | 6 5 4 3 | 2 | NO. OF PACKAGING: OPTION C ASSEMBLY DIMENSION] |NO. OF PACKAGING: OPTION C ASSEMBLY DIMENSION CKTS pe Hers tse PLATINGS PER ES-88-(+s) CKTS pepe Pe os PLATINGS PER ES-88-(###) ER TAPE AND REEL PER (SEE SHEET | FOR PLATING SPECIFICATIONS) A B (SEE SHEET | FOR PLATING SPECIFICATIONS) A B = {Rom TOTAL | PK-70873-0918 15 GOLD 30 GOLD | 50 GOLD how [TOTAL 15 GOLD 30 GOLD | 50 GOLD | 20 | 40 PK-70873-0 138 71979-1820 71979-1920 71979-2020 Shay a Geer a __ | _ 2.095 | 2.000 21 | 42 PK-70873-0 138 71979-1821 71979-1921 ris7s-202|_ | essr | Gogo PK-70873-0 138 71979-1804 71979-1904 71979-2004 | .395 | .300 22 | 44 . . . 2.195 | 2.100 4 8 PK-70873-09 18 X| Tig7a-3804 |X| TI979-3904 [|X| 7I979-4004 | (10.03) | (7.62) PK-70873-0138 TIST9" 1822 71979-1922 risra72022 5 lo PK-70873-0138 TI9T9- 1805 71979-1905 71979-2005 .495_ | .400 23 | 46 PK-70873-0138 71979-1823 71979-1923 71979-2023 | 22295 | 2-200. PK-70873-0918 Xx] 71979-3805 [x] 71979-3305 |x| 71979-4005 | (12.57) | (10.16) 2a | 4a ee) eee s |p PK-70873-0138 71979-1806 71979-1906 71979-2006 | .595_ | .500 PK-70873-0138 TI9T9" 1824 19791924 fIST9-2024 | 68.42) _| PK-70873-0918 X| 71979-3806 |X} 71979-3906 | X| 71979-4006 ea a) 25 | 50 PK-70873-0138 71979-1825 71979-1925 7 1979-2025 2.495, | 2.400, 7 4 PK-10873-0 [38 71979-1807 71979-1907 71979-2007 695 | .600 2505 | 2500 PK-70873-0918 X| 71979-3807 |x| 71979-3907 _|x|7I979-4007 _| I7.65) | (15.24) 26 | 52 PK-70873-0138 Tig7s-1e26 | | Tig7a-i926 | [ri979-2026 | Ean | essor PK-70873-0 138 71979-1808 71979-1908 71979-2008 795 -700 27 | 54 . | 71979-1827 71979-1927 71979-2027 2.695 | 2.600 Eye | PK-70873-0918 X[ 71979-3808 |x| 71979-3908 |x] 71979-4008 | (20.19) | (17.78) PK-70873-0138 se8.d5) 166.04) 9 i8 PK-70873-0 138 71979-1809 71979-1909 71973-2003 | .895 | .800 28 | 56 PK-70873-0 [38 71979-1828 71979-1928 risva-2028 | ager _| Ga.sar PK-70873-0918 x] 71979-3809 |X| 71979-3909 |x| 71979-4009 | (22.75) | (20.32) 99 | 58 _ . . _ . 2.895 | 2.800 io | 20 PK-170873-0138 71979-1810 71979-1910 71979-2010 995 | .900 PK-70873-0138 TITS 1628 TipT9" 1928 misrs~2029 tf ers.s | tri) PK-70873-0918 71979-3810 71979-3910 71979-4010 (25.27) | (22,86) 30 | 60 PK-70873-0138 71979-1830 71979-1930 71979-2030 RO aes 1, | 2 PK-70873-0 138 71979-1811 71979-1911 71979-2011 1.095. | _1.000 31 lee 3,095 13.66) PK-70873-0918 M1 7is7s-3en TX) 7ie79-39n TX) Tis7s401 | 28D | 25.40) PK-70873-0138 71979-1831 71979-1931 71979-2031 | Geer | Gea 2 | 24 PK-70873-0138 71979-1812 71979-1912 71979-2012 1195, | L100 32 | 64 PK-70873-0138 71979-1832 71979-1932 71979-2032 Bie ae PK-70873-09 18 X| 71979-3812 |x| 7979-3912 |X| 71979-4012 | (50.55) | (27.94) 3.295 | 3.200 3 | 26 [_PK-70873-0138 71979-1813 71979-1913 71979-2013 | 1.295 | 1.200 33 [66 | px-70873-0138 Tig79-1833_ | | 7i97s-1933__| |ris79-2033 | seer | wiper PK-70873-0918 X| 71979-3813 [|X| 71979-3913 |X| 7I979-4013 | (52.89) | (50.48) _ _ _ 3.395 | 3.300 34 | 68 - | 71979-1834 71979-1934 71979-2034 Gap Dia | 2a PK-70873-0 138 71979-1814 71979-1914 71979-2014 1.395 | 1.300 PK-10875-0 158 as 3.400 PK-70873-0918 x[ 71979-3814 |x| 7I979-3914_ [x] 71979-4014 | 95.45) | (53.02) 35 | 70 PK-70873-0 [38 71979-1835 71979-1935 71973-2035 | gern | Geser PK-70873-0 138 71979-1815 71979-1915 71979-2015 1.495 | 1400 36 | 72 . _ - - - 3.595 | 3.500 5 {3 PK-70873-09 18 X| 71979-3815 |X| 7I979-3915 |X| 7I979-4015 | 7.97) | (35.56) PK-70873-0138 T1973" 1636 T1979" 1936 71979-2036 __ | isp | @e.907 | ie | 32 PK-70873-0 138 71979-1816 71979-1916 71979-2016 1595 | 1.500 PK-70873-0918 X| 71979-3816 |X| 71979-3916 |X| 71979-4016 40.51) | (38.10) | 7 34 PK-70873-0 138 71979-1817 71979-1917 71979-2017 1.695 1.600 PK-70873-0918 x| t1979-3817_[x| 7i979-3917 [x] 71979-4017 _| (43.05) | (40.64) ia | 36 PK-70873-0 138 71979-1818 71979-1918 71979-2018 1795 | 1.700 PK-70873-0918 x] 71979-3818 [Xx] 71979-3918 [xX] 71979-4018 | (49.59) _| (43.18) ig | 38 PK-70873-0 138 71979-1819 71979-1919 71979-2019 1.895 | 1.800 c PK-70873-09 18 X| 71979-3819 |X| 71979-3919 |x| 71979-4019 | (48-13) | (45.72) B =SS] quality] GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE Ss5| CUAUTY! UNLESS: SPECIFIED) IN/MM NTS | INCH |CIpROvECTION sss mm INCH __ | DRAWN BY DATE TITLE oS oe SSE) Z\W-0 [CPLACESE--- _[F-- JB 1995/03/15 SMT RECEPTACLE %@ 3 PLACES|t--- |+--~ [CHECKED BY DATE RIGHT ANGLE, DUAL ROW & _[B|\7=0 [zpLacese=== [4.01 JB 1995/03/15 WITH AND WITHOUT PEG "X" INDICATES TOOLING IS NOT AVAILABLE. S yguwiy/ 4 PLACE [0.25 |[+--- APPROVED BY DATE hole an 2uZ|o ole A moses ANGULAR +1/2 JB 1995/03/15, Rolex ~=MOLEX INCORPORATED 2 S Say MATERIAL NO. DOCUMENT NO. SHEET NO. use xe DRAFT ERE AG ICABLE SEE TABLE SDA-71979-xxxx 9 OF 12 Oi Aw =e > WITHIN DIMENSIONS SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H2 wu A 3 INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 8 7 6 5 | 4 | 3 | 2 1 Rev. E 2006/04/1510 9 8 | 7 | 6 5 4 3 | 2 NO. OF OPTION D ASSEMBLY DIMENSION NO, OF OPTION D ASSEMBLY DIMENSION CKTS PLATINGS PER ES-88-(#) CKTS PLATINGS PER ES-88-(+#s) (SEE SHEET | FOR PLATING SPECIFICATIONS) (SEE SHEET | FOR PLATING SPECIFICATIONS) PER PER F row [TOTAL 15 GOLD 30 GOLD | 50 GOLD A| B row | TOTAL 15 GOLD 30 GOLD | 50 GOLD A| B 4 |8 71979-2604 71979-2704 71979-2804 er =e 34 | 68 71979-2634 71979-2734 71979-2834 es a 5 10 71979-2605 71979-2705 71979-2805 ey awe 35 | 70 71979-2635 71979-2735 71979-2835 ae ae 6 12 71979-2606 71979-2706 71979-2806 mar ar 36 | 72 TIST9-2636 11979-2736 71979-2836 ane ax 7 | 14 71979-2607 71979-2707 71979-2807 ae eo 8 I6 71979-2608 71979-2708 71979-2808 aay ae 2895 800 3 18 71979-2609 TI9T9-2709 TI979-2809 || (29-73) | (20.32), lo | 20 71979-2610 71979-2710 71979-2810 aor aes 1.095 1.000 E | ll | 22 71979-2611 71979-2711 71973-2811 || oan | @5.407 l2 | 24 71979-2612 71979-2712 71979-2812 as, aes 1.295 1.200, 13 | 26 71979-2613 71979-2713 71973-2813 |! (33.89) | Go.as) 1.395 1.300. 14 | 28 71979-2614 71979-2714 71973-2814 | saz) | G3.02) _ 1495 1.400. 15 | 30 71979-2615 71979-2715 71973-2815 |l 3777 | GS-5er 1.595 1.500, Ie | 32 71979-2616 71979-2716 71979-2816 || qos | G8.10) 1.695 1.600 7 | 34 71979-2617 71979-2717 71973-2817 || 3.05) | Go.e4) L795 700, 18 | 36 71979-2618 71979-2718 71979-2818 || @ssay | scar D 1895 | _1.800_ \9 | 38 71979-2619 71979-2719 71973-2819 |I gy | Gs.72 1.995 1.900. 20 | 40 71979-2620 71979-2720 71973-2820 |l Goer | Gs.267 21 | 42 71979-2621 71979-2721 71979-2821 ae 5 aS 2.195 2.100 22 | 44 71979-2622 71979-2722 71973-2822 || Gs-75) | G3.34y 23 | 46 71979-2623 71979-2723 71979-2823 Ae ae 2.395, 2,300 24 | 48 71979-2624 TI979-2724 71979-2824 |! Go-asy | Ge-azy 25 | 50 71979-2625 71979-2725 71979-2825 aes ae C | 26 | 52 71979-2626 71979-2726 71979-2826 ee a 2.695 2.600. 27 | 54 71979-2627 71979-2727 71979-2827 || Gg-asy | Ge.04) 28 | 56 71979-2628 71979-2728 71979-2828 aS ae 2.895 800 29 | 58 71979-2629 71979-2729 71973-2829 |I 73.53) | TL 2,995 300 30 | 60 71979-2630 71979-2730 71979-2830 || ~eo7y | Gaeey 31 | 62 71979-2631 71979-2731 71973-2831 az 7 ae 3.195 3.100 32 | 64 71979-2632 71979-2732 71979-2832 |I LEY | G8.74 B 33 | 66 71979-2633 71979-2733 71979-2833 ae ane =S5)] TQuAlmy] GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE SSS) ee UNLESS SPECIFIED) IN/MM NTS | INCH | ClpxovEctiON ann sss mm INCH DRAWN BY DATE TITLE SS 52-0 [7 PAcES|E-- [e- JB 1995/03/15 SMT RECEPTACLE NOTE: ALL CONNECTORS ARE PACKAGED IN TUBES PER PK-70873-0138 % E 3 PLACES IE ==> | baa> (CHECKED BY DATE RIGHT ANGLE, DUAL ROW von a 5 W=0 2 PLACES|+--- _[+.01 JB 1995/03/15 WITH AND WITHOUT PEG X" INDICATES TOOLING IS NOT AVAILABLE. 2 sulk APPROVED BY DATE asZugls TPLACE [0.25 _[# fol& MOLEX INCORPORATED A moses ANGULAR +1/2 JB 1995/03/15] V7 n S 2 a = MATERIAL NO. DOCUMENT NO. SHEET NO. iu =x<o DRAFT WHERE APPLICABLE] SEE TABLE SDA-71979-xxxx 10 OF 12 Om Go << wT? BREEN s SZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H2 iw (A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 3 7 6 5 | i | 3 | 2 | Rev. E 2006/04/1540 9 | 7 | 6 5 4 3 | 2 NO. OF OPTION E ASSEMBLY DIMENSION NO. OF OPTION E ASSEMBLY DIMENSION CKTS PLATING PER ES-88-(+##) CKTS PLATING PER ES-88-(+#*) PER (SEE SHEET | FOR PLATING SPECIFICATIONS) A B = (SEE SHEET | FOR PLATING SPECIFICATIONS) A|B = [fo TOTAL 15 GOLD 30 GOLD | 50 GOLD row | TOTAL 15 GOLD 30 GOLD | 50 GOLD 4 |8 71979-3004 71979-3104 71979-3204 an a 34 | 68 71979-3034 TI979-3 134 11979-3234 aeee ae 5 lo 71979-3005 71979-3105 71979-3205 amor at 35 | 70 71979-3035 71979-3135 11979-3235 as as 6 \2 71979-3006 71979-3106 71979-3206 soe aa 36 | 72 71979-3036 TIST9-3 136 TI9T9-3236 as ae 7 14 71979-3007 TI979-3 107 TIS79-3207 aes ae 1.058 | .700 8 16 71979-3008 71979-3108 TI979-3208 |! 6.87) | (7.78) 9 18 71979-3009 71979-3109 71979-3209 ann ay lO | 20 71979-3010 71979-3110 71979-3210 ans a E | It | 22 71979-3011 71979-3111 71979-3211 aos ae l2 | 24 71979-3012 71979-3112 71979-3212 ares an 1.558 | 1.200 [3 | 26 71979-3013 71979-3113 71979-3213 || (9.57) | o.48) 14 | 28 71979-3014 71979-3114 TIST9-32 14 at 58 aes 1.758 | 1.400 15 | 30 71979-3015 71979-3115 71979-3215 || (@a.65y | 5.56) 858 | 1.500 I6 | 32 71979-3016 71979-3116 71979-3216 || (7197 | a.10) 958 | 1.600 I7 | 34 71979-3017 71979-3117 TI979-32I7 |! (49.73) | (0.64) D 18 | 36 71979-3018 71979-3118 71979-3218 a ae I9 | 38 71979-3019 71979-3119 71979-3219 ae a 2.258 | _1.900 20 | 40 71979-3020 71979-3120 TI979-3220 || (735) | (48.26) 21 | 42 71979-3021 71979-3121 71979-3221 ae ae 22 | 44 71979-3022 TI979-3 122 TIST9-3222 as ae 558 | 2.200 23 | 46 71979-3023 71979-3123 TIST9-3223 |! (4.97) | 5.88) 658 | 2.300 24 | 48 71979-3024 71979-3124 71979-3224 || (7.50 | Ga.42) 25 | 50 71979-3025 TI979-3 125 TIST9-3225 ae AS Cc 2.858 | 2.500 26 | 52 71979-3026 71979-3126 TIS979-3226 || (75.59) | (63.50) 2.958 600 27 | 54 71979-3027 71979-3127 71979-3227 || (75.13) | (6.04) 3.058 | 2.700 28 | 56 71979-3028 71979-3128 71979-3228 || 77.67) | (68.58) 29 | 58 71979-3029 71979-3129 TI979-3229 mos eee 3.258 900 30 | 60 71979-3030 71979-3130 71979-3230 || @a-75y | (73.66) 31 | 62 71979-3031 71979-3131 71979-3231 as an 32 | 64 71979-3032 71979-3132 TI979-3232 ass ae B [33 _| 66 1979-3033 71979-3133 71979-3233 aot wines S so QUALITY] GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE Ss5| CUAUTY! UNLESS: SPECIFIED) IN/MM NTS | INCH |CIpROvECTION _ BN KH sss mm INCH DRAWN BY DATE TITLE NOTE: ALL CONNECTORS ARE PACKAGED IN TUBES PER PK-70873-0139 + S252 F-0 Places -__ [+-- JB 1995/03/15 SMT RECEPTACLE 3 be 3 PLACES|t--- [+--~ _ [CHECKED BY DATE RIGHT ANGLE, DUAL ROW a SI\C/=0 [2 PLACES|+__|+.04 JB 1995/03/15 WITH AND WITHOUT PEG "X" INDICATES TOOLING IS NOT AVAILABLE. S win.) 1 PLACE [0.25 [4--- [APPROVED BY DATE A moses ANGULAR #1/2 JB 1995/03/15 fol MOLEX INCORPORATED Yn S 2 a = MATERIAL NO. DOCUMENT NO. SHEET NO. oeTt DRAFT WHERE APPLICABLE| SEE TABLE SDA-71979-xxxx OF 12 Om Go << WIT? BREN s [SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H2 we A 5 INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 7 6 5 | i | 3 | 2 | Rev. E 2006/04/1540 9 | 7 | 6 5 4 3 | 2 NO. OF OPTION F ASSEMBLY DIMENSION NO. OF OPTION F ASSEMBLY DIMENSION CKTS PLATING PER ES-88-(+##) CKTS PLATING PER ES-88-(##) Pe TOTAL (SEE SHEET 2 eS a A B Cc Pen TOTAL (SEE SHEET - OS a A B Cc r 4 |8 71979-3404 71979-3504 71979-3604 a 2 rom 34 | 68 TIS79-3434 71979-3534 11979-3634 ae ae aoe 5 | lo 71979-3405 71979-3505 71979-3605 mee awe 2 35 | 70 TIS79-3435 71979-3535 71979-3635 as ae at 6 12 71979-3406 71979-3506 71979-3606 aoe ae we 36 | 72 71979-3436 71979-3536 71979-3636 as a ae 7 14 TI979-3407 11979-3507 71979-3607 aes a on a se 8 | le 71979-3408 71979-3508 71979-3608 anes a ay 9g 18 71979-3409 71979-3509 71979-3609 ant at a lo | 20 71979-3410 71979-3510 TIST9-36 10 aes oe oy E | ll | 22 71979-3411 71979-3511 71979-3611 ane ae aa I2 | 24 71979-3412 71979-3512 7I979-36 12 aves atom ae IZ | 26 TI979-3413 71979-3513 TI979-36 13 apes aes ares 14 | 28 71979-3414 71979-3514 71979-3614 ane aeons aes 15 | 30 71979-3415 71979-3515 71979-3615 aes as aon l6 | 32 TI979-3416 71979-3516 TIST9-36 16 ae ae ase 7 | 34 71979-3417 71979-3517 71979-3617 aes, ae ae Ig | 36 71979-3418 71979-3518 71979-3618 oe anne at D Ig | 38 71979-3419 71979-3519 TI979-36 19 aes as ao 20 | 40 71979-3420 71979-3520 71979-3620 aes ae anes 21 | 42 71979-3421 71979-3521 71979-3621 ess eos aes __| 22 | 44 71979-3422 71979-3522 71979-3622 os aoe ares 23 | 46 71979-3423 71979-3523 71979-3623 es aw aoe 24 | 48 71979-3424 71979-3524 71979-3624 ae ae as 25 | 50 71979-3425 71979-3525 71979-3625 ae as aes C | 26 | 52 71979-3426 71979-3526 71979-3626 ass ast as 27 | 54 71979-3427 71979-3527 71979-3627 aes AS # 808. 28 | 56 71979-3428 71979-3528 71979-3628 ae AS ae 29 | 58 71979-3429 71979-3529 71979-3629 ma Fo aS ~ | 30 | 60 71979-3430 71979-3530 71979-3630 ws aes eee 3| | 62 71979-3431 71979-3531 71979-3631 as ae as 32 | 64 71979-3432 71979-3532 71979-3632 as ae ae B | 33 | 66 71979-3433 71979-3533 71979-3633 ass ame ae ==) [ouauity] GENERAL TOLERANCES TENYMM NTS NCH cq] HIRD. ANGLE | S=5 SYMBOLS| (UNLESS aaa SME aE PROJECTION RRElz W-0 PASE JB 1995/03/15 SMT RECEPTACLE NOTE: ALL CONNECTORS ARE PACKAGED IN TUBES PER PK-70873-0139 3 a 3 PLACES|+--- _|[+--- __|CRECKED BY DATE RIGHT ANGLE, DUAL ROW "X" INDICATES TOOLING IS NOT AVAILABLE S oe f vo 5 PLACE 05 i SFPROTED BY OE NO MOO A " nel ANGULAR V72 JB 1995/03/15, flex MOLEX INCORPORATED NS 2 a = MATERIAL NO. DOCUMENT NO. SHEET NO. no =< DRAFT WHERE APPLICABLE] SEE TABLE SDA-71979-xxxx 12 OF 12 rn out MUST REMAIN SZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H2 iB WITHIN DIMENSIONS A3 INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 3 7 6 5 | i | 3 | 2 | Rev. E 2006/04/15