09 Series Fast-Lead Screws 332 Studs * Small Material and Finish Captive screw Retainer Panel Low carbon steel, case hardened, zinc plated, chromate plus sealer or stainless steel 2. Choose your receptacle 3. Choose the retainer style 4. Find the correct constant in table opposite using the receptacle and retainer selected 5. Add outer panel thickness (P), frame thickness (F), and the constant found in step 4 to determine your total material thickness (TMT) TMT = P+F+Constant Door F How to Specify: 1. Determine your outer panel and frame thicknesses: Outer panel P = Frame thickness F = Nylon wear Washer Total material Thickness Frame TMT (Total material Thickness) Receptacle Slot Knurled Head O 7.7 (.30) 0.5 (.020) Tool head Recess O 7.9 (.31) Before knurl 1.8 (.070) 7.9 (.31) 1.3 (.05) A Nylon Wear Washer No. 2 Phillips Recess 9.5 (.38) 22.2 (.88) Tool head recess key order separately Part Number: 29-90-214-10 3.2 (.125) Constant Table Retainer Type Receptacle Type Flat Rivet or Weld Clip Saddle Press-In Stainless steel 0.3 (.012) 1.0 (.032) 4.5 (.177) -1.3 (-.050) Nylon 1.1 (.043) 1.6 (.063) 5.3 (.208) -0.5 (-.020) Column 1 Column 2 TMT Outer Panel P Screw Assembly Part Number Min. Max. 1.3 (.050) 3.2 (.125) 0.9 (.035) 09-11-102-11 09-13-102-11 09-T-102 Part Number 2.5 (.100) 3.2 (.125) 2.2 (.085) 09-11-103-11 09-13-103-11 09-T-103 See table 1.3 (.050) 6.4 (.250) 0.9 (.035) 09-11-202-11 09-13-202-11 09-T-202 Notes 2.5 (.100) 6.4 (.250) 2.2 (.085) 09-11-203-11 09-13-203-11 09-T-203 For full screw retraction, B must be less than frame thickness plus receptacle height 3.8 (.150) 6.4 (.250) 3.4 (.135) 09-11-204-11 09-13-204-11 09-T-204 5.1 (.200) 6.4 (.250) 4.7 (.185) 09-11-205-11 09-13-205-11 09-T-205 1.3 (.050) 9.5 (.375) 0.9 (.035) 09-11-302-11 09-13-302-11 09-T-302 2.5 (.100) 9.5 (.375) 2.2 (.085) 09-11-303-11 09-13-303-11 09-T-303 3.8 (.150) 9.5 (.375) 3.4 (.135) 09-11-304-11 09-13-304-11 09-T-304 5.1 (.200) 9.5 (.375) 4.7 (.185) 09-11-305-11 09-13-305-11 7.6 (.300) 9.5 (.375) 7.2 (.285) 09-11-307-11 09-13-307-11 www.southco.com/09 ACTUAL SIZE ACTUAL SIZE ACTUAL SIZE 3.2 (.125) 3.2 (.125) 8. Going across the row in the part number table, find the part number that matches your desired head style For stainless steel screw (slotted, and knurled ONLY) replace last 2 digits of part number with "26". Example: 09-11-102-26 O 9.5 (.375) 26.5 (1.04) B C O 3.5 (.136) O 4.8 (.188) Phillips Recess O 9.5 (.375) 6. Find the TMT value in the ranges given in Column 1 in the part number table 7. Confirm that the outer panel thickness P does not exceed the value given in Column 2. This will confirm that your retainer will install properly beyond the last thread and retain your screw to the outer panel P Slotted Dimensions in millimeters (inch) unless otherwise stated Knurled Tool Head Recess Dimensions Phillips Recess A B C 09-P-102 2.5 (.100) 5.0 (.197) 09-P-103 3.8 (.150) 3.7 (.147) 10.7 (.422) 09-P-202 2.5 (.100) 8.2 (.322) 09-P-203 3.8 (.150) 6.9 (.272) 09-P-204 5.1 (.200) 5.6 (.222) 09-P-205 6.4 (.250) 4.4 (.172) 09-P-302 2.5 (.100) 11.4 (.447) 09-P-303 3.8 (.150) 10.1 (.397) 09-P-304 5.1 (.200) 8.8 (.347) 09-T-305 09-P-305 6.4 (.250) 7.3 (.297) 09-T-307 09-P-307 8.9 (.350) 5.0 (.197) 13.9 (.547) 17.1 (.672) 09 Series Fast-Lead Screws 333 Receptacles / retainers * Small Flat Type Receptacle Clip-On Type Receptacle 2 Holes, O 2.6 for 2.5 mm hardware or O .098 for O .094 rivet 22.2 CSK other side to suit (.88) 7.9 (.312) 15.9 7.9 (.625) (.312) 0.5 (.020) Frame 19.8 (.78) 7.9 (.31) Weld Rivet Saddle Type Receptacle Self-Clinching Receptacle Free Running 1.2 (.048) Min. frame thickness 4.8 (.19) 2 Holes, O 2.6 for 2.5 mm hardware or O .098 for O .094 rivet 22.2 CSK other side to suit (.88) +0.1 O 7.1 (.281 +.003 ) Do NOT chamfer back side of hole 1.3(.05) O 7.9 (.312) Over knurl 7.9 (.31) 15.9 7.9 (.625) (.312) Type O 3.9 (.152) Stainless Steel 165 (6.50) Tool O 1.1 (.043) 0.3 (.012) O 12.7 (.50) Nylon O 3.6 (.14) 15.9 (.625) O 33.3 (1.31) O 14.3 (.56) 1.1 (.043) Tool Retainer Door O 5.2 (.203) Solid back-up (Slotted back-up for wing head screws) Receptacle Part Number Steel O 9.5 (.375) 0.5 (.020) 2 Holes, O 2.7 (.105) Retainers 7.9 (.312) 6.4 (.25) O 7.1 (.278) Door See page 497 for self-clinching installation guidelines 12.7 (.50) 0.8 (.031) Min. 2.4 (.094) Max. 0.51 (.020) O 12.7 (.50) Installation Notes 6.4 (.25) Max. O 6.4 (.250) Min. O 7.1 (.281) Max. 15.9 (.625) 2 Holes, O 2.7 (.105) Steel, zinc immersion coating or stainless steel 4.8 (.19) Min. O9.5 (.375) 7.9 (.31) Material and Finish Stainless steel Retainer Style Retainer Part Number 09-6-1 09-49-102-42 Flat receptacle rivet-on 09-41-101-11 09-41-101-24 Flat receptacle weld-on ~ 09-41-103-24 302 Stainless steel, passivated Clip-on receptacle 09-43-101-11 09-43-101-24 Nylon, black Press-in receptacle 09-44-101-11 ~ Saddle type receptacle 09-42-101-11 09-42-101-24 Tool Part Number Part Number See table 12-0-20980-11 Dimensions in millimeters (inch) unless otherwise stated www.southco.com/09 12 Series Fast-Lead Screws 334 Studs * Medium Material and Finish Captive screw Retainer Panel Low carbon steel, case hardened, zinc plate, chromate plus sealer or stainless steel Slot 2. Choose your receptacle 3. Choose the retainer style 4. Find the correct constant in table opposite using the receptacle and retainer selected 2.7 (.11) 12.7 (.50) 2 (.08) O 5.9 (.232) 22.2 (.88) Slotted Head ACTUAL SIZE ACTUAL SIZE ACTUAL SIZE Phillips Recess O 11.1 (.44) Wing HeadO 11.1 (.44) O 11.1 (.44) Knurled O 11.1 (.44) Head Toolhead Recess ACTUAL SIZE 11.1 (.44) 9.5 (.38) 9.5 (.38) 26.7 (1.05) 26.7 (1.05) 3.6 (.14) 3.6 (.14) 3.6 (.14) 3.6 (.14) Notes For full screw retraction, B must be less than inner panel thickness plus receptacle height For stainless steel screw (slot, wing and knurled ONLY) replace last 2 digits of part number with "12". Example: 12-11-102-12 Wing Head Wing Head Knurled Head www.southco.com/12 9.5 (.38) 26.7 (1.05) B C Tool head Recess 8. Going across the row in the part number table, find the part number that matches your desired head style 11.1 (.44) Tool head recess order separate Part number 29-90- Slot Slot 6. Find the2 (.08) TMTWide value in the2 (.08) ranges x 2.4 (.09) deep Wide x 2.4 (.09) deep given in Column 1 in the part number table 12.7 (.50) 11.1 (.44) O 12.7 (.50) Before knurl 22.2 (.88) A O 4.4 (.172) 7. Confirm that the outer panel thickness P does not exceed the value given in Column 2. This will confirm that yourO 12.7 retainer (.50) will install O 12.7 (.50) 22.2 (.88) Before knurl Before knurl properly beyond the last thread and retain your screw to the outer panel Knurled Head 12.7 (.50) Nylon wear washer 5. Add outer panel thickness (P), frame thickness (F), and the constant found in step 4 to determine your total material thickness (TMT) TMT = P+F+Constant T Slot 2 (.08) Wide x 2.4 (.09) deep Receptacle Wing Head O 0.5 (.02) P Frame TMT (Total material Thickness) 1. Determine your outer panel and frame thicknesses: Outer panel P = Frame thickness F = 12.7 (.50) Doo F How to Specify: 7 2.2 (.88) 1) Nylon wear Washer 22.2 (.88) 22.2 (.88) Tool head recess key Tool head recess key order separately order separately Part number 29-90-214-10 Part number 29-90-214-10 Constant Table Retainer type steel Knurled StainlessToolhead Head Recess Nylon Receptacle Type Flat 0.38Toolhead (.015) Recess 1.4 (.054) Clip Saddle 1.1 (.045) 4.0 (.156) Phillips Head(.210) 5.31 2.0 (.079) Dimensions in millimeters (inch) unless otherwise stated Side 1.5 (.060) Phillips Head 1.5 (.060) Press-In -1.3 (-.050) -0.5 (-.020) 335 Part Number See table Column 1 Column 2 TMT to be Fastened Min. Max. 1.3 (.050) 3.2 (.125) 2.5 (.100) Max. Thickness of Outer Panel P Screw Assembly Part Number Slotted Wing Knurled Tool Head Recess Dimensions Phillips Recess A B 0.6 (.025) 12-11-102-11 12-12-102-11 12-13-102-11 12-T-102 12-P-102 2.5 (.100) 5.8 (.228) 1.9 (.075) 12-11-103-11 12-12-103-11 12-13-103-11 12-T-103 12-P-103 3.8 (.150) 4.5 (.178) 1.3 (.050) 0.6 (.025) 12-11-202-11 12-12-202-11 12-13-202-11 12-T-202 12-P-202 2.5 (.100) 9.0 (.353) 2.5 (.100) 1.9 (.075) 12-11-203-11 12-12-203-11 12-13-203-11 12-T-203 12-P-203 3.8 (.150) 7.7 (.303) 3.2 (.125) 12-11-204-11 12-12-204-11 12-13-204-11 12-T-204 12-P-204 5.1 (.200) 6.4 (.253) 5.1 (.200) 4.5 (.175) 12-11-205-11 12-12-205-11 12-13-205-11 12-T-205 12-P-205 6.4 (.250) 5.2 (.203) 1.3 (.050) 0.6 (.025) 12-11-302-11 12-12-302-11 12-13-302-11 12-T-302 12-P-302 2.5 (.100) 12.1 (.478) 2.5 (.100) 1.9 (.075) 12-11-303-11 12-12-303-11 12-13-303-11 12-T-303 12-P-303 3.8 (.150) 10.9 (.428) 3.8 (.150) 3.8 (.150) 6.4 (.250) 9.5 (.375) 3.2 (.125) 12-11-304-11 12-12-304-11 12-13-304-11 12-T-304 12-P-304 5.1 (.200) 9.6 (.378) 5.1 (.200) 4.5 (.175) 12-11-305-11 12-12-305-11 12-13-305-11 12-T-305 12-P-305 6.4 (.250) 8.3 (.328) 7.6 (.300) 7.0 (.275) 12-11-307-11 12-12-307-11 12-13-307-11 12-T-307 12-P-307 8.9 (.350) 5.8 (.228) 2.5 (.100) 1.9 (.075) 12-11-403-11 12-12-403-11 12-13-403-11 12-T-403 12-P-403 3.8 (.150) 14.1 (.553) 3.2 (.125) 12-11-404-11 12-12-404-11 12-13-404-11 12-T-404 12-P-404 5.1 (.200) 12.8 (.503) 4.5 (.175) 12-11-405-11 12-12-405-11 12-13-405-11 12-T-405 12-P-405 6.4 (.250) 11.5 (.453) 3.8 (.150) 5.1 (.200) 12.7 (.500) 7.6 (.300) 7.0 (.275) 12-11-407-11 12-12-407-11 12-13-407-11 12-T-407 12-P-407 8.9 (.350) 9.0 (.353) 10.2 (.400) 9.5 (.375) 12-11-409-11 12-12-409-11 12-13-409-11 12-T-409 12-P-409 11.4 (.450) 6.4 (.253) 2.5 (.100) 1.9 (.075) 12-11-503-11 12-12-503-11 12-13-503-11 12-T-503 12-P-503 3.8 (.150) 17.2 (.678) 3.8 (.150) 3.2 (.125) 12-11-504-11 12-12-504-11 12-13-504-11 12-T-504 12-P-504 5.1 (.200) 16.0 (.628) 4.5 (.175) 12-11-505-11 12-12-505-11 12-13-505-11 12-T-505 12-P-505 6.4 (.250) 14.7 (.578) 7.0 (.275) 12-11-507-11 12-12-507-11 12-13-507-11 12-T-507 12-P-507 8.9 (.350) 12.1 (.478) 10.2 (.400) 9.5 (.375) 12-11-509-11 12-12-509-11 12-13-509-11 12-T-509 12-P-509 11.4 (.450) 9.6 (.378) 12.7 (.500) 12.1 (.475) 12-11-511-11 12-12-511-11 12-13-511-11 12-T-511 12-P-511 14 (.550) 7.1 (.278) 2.5 (.100) 1.9 (.075) 12-11-603-11 12-12-603-11 12-13-603-11 12-T-603 12-P-603 3.8 (.150) 20.4 (.803) 3.8 (.150) 3.2 (.125) 12-11-604-11 12-12-604-11 12-13-604-11 12-T-604 12-P-604 5.1 (.200) 19.1 (.753) 5.1 (.200) 4.5 (.175) 12-11-605-11 12-12-605-11 12-13-605-11 12-T-605 12-P-605 6.4 (.250) 17.9 (.703) 5.1 (.200) 7.6 (.300) 7.6 (.300) 10.2 (.400) 15.9 (.625) 19.1 (.750) 7.0 (.275) 12-11-607-11 12-12-607-11 12-13-607-11 12-T-607 12-P-607 8.9 (.350) 15.3 (.603) 9.5 (.375) 12-11-609-11 12-12-609-11 12-13-609-11 12-T-609 12-P-609 11.4 (.450) 12.8 (.503) 12.7 (.500) 12.1 (.475) 12-11-611-11 12-12-611-11 12-13-611-11 12-T-611 12-P-611 14 (.550) 10.2 (.403) 15.3 (.600) 14.6 (.575) 12-11-613-11 12-12-613-11 12-13-613-11 12-T-613 12-P-613 16.5 (.650) 7.7 (.303) 17.8 (.700) 17.2 (.675) 12-11-615-11 12-12-615-11 12-13-615-11 12-T-615 12-P-615 19.1 (.750) 5.2 (.203) Dimensions in millimeters (inch) unless otherwise stated C 12.3 (.486) 15.5 (.611) 18.7 (.736) 21.9 (.861) 25 (.986) 28.2 (1.111) www.southco.com/12 12 Series Fast-Lead Screws 336 Receptacles * Medium Material and Finish O 3.3 (.130) Side mount receptacle: 1064 steel, zinc immersion coating Press-in receptacle: low carbon steel, case hardened and zinc plate, chromate plus sealer Flat Type Receptacle Side Mount Receptacle Steel, zinc immersion coating or stainless steel 17.0 (.67) 17.0 (.67) O 12.7 (.50) Frame Installation Notes 9.5 (.375) 12.7 (.50) 8.4 (.33) 19.1 (.750) 9.5 (.38) Min. OH 8.3 (.325) Door O 6.4 (.25) 27 (1.06) 19.1 (.750) 9.5 (.375) 32.3 (1.27) See page 497 for self-clinching installation guidelines 0.6 (.025) OH 8.4 (.33) Weld Rivet Self-Clinching Receptacle Free Running 19.1 (.750) Saddle Type Receptacle 9.5 (.38) Min. OH 4.7 (.19) 1.53 (.060) Min. sheet thickness 1.6 (.06) O 12.7 (.50) +0.1 O 10.5 (.415) O 9.5 (.372) O 9.5 -0.0 (.375 +.003 -.000 ) 27 (1.06) 19.1 (.750) 9.5 (.375) 12.7 (.50) 19.1 (.750) 7 (.28) 9.5 (.375) O 3.43 (.135) 0.5 (.02) Weld Rivet Part Number See table Type Side mount receptacle Flat receptacle rivet Flat receptacle weld-on www.southco.com/12 OH Receptacle Part Number Steel Stainless steel ~ 12-90-101-10 ~ 2.7 (.105) 12-11015-13 12-11015-14 3.4 (.135) 12-11020-11 12-11020-13 ~ ~ 12-11016-11 Press-in receptacle ~ 12-44-101-11 ~ Saddle receptacle rivet 3.4 (.135) 12-11043-11 12-11043-12 Saddle receptacle weld-on ~ ~ 12-11044-12 Dimensions in millimeters (inch) unless otherwise stated 12 Series Fast-Lead Screws 337 Receptacles / retainers * Medium Clip-On Type Receptacle Narrow Flange Frame thickness Z Max. J Type A B O 11.1 (.44) .6 (.025) Material and Finish 4.8 (.19) Min. 6.4 (.25) Max. O 7.1 (.281) Min. O 7.9 (.312) Max. 12.7 (.50) 14.3 (.56) 4.1 (.160) U Type 25.4 (1.00) Type Frame Thickness A Clip-on receptacle - J .8 (.031) to 2.8 (.109) 24.8 (.98) U Type .8 (.031) to 2.8 (.109) 2.8 (.109)- 4.1 (.161) Clip-on receptacle - U 25.9 (1.02) B Z Max. (.50) Narrow12.7 Flange 14.2 (.56) 11.9 (.47) 2.8 (.109)- 4.1 (.161) Clip-on receptacle - Narrow flange Steel, zinc immersion coating or stainless steel Frame thickness 4.1 (.161)- 5.5 (.213) 24.8 (.98) 13.5 (.53) 5.4 (.213)- 6.7 (.265) 24.5 (.97) 13.01 (.51) 0.8 (.031)- 2.8 (.109) ~ ~ 11.1 (.44) ~ Receptacle Part Number Steel Stainless steel 12-11025-11 ~ 12-11017-11 12-11017-12 12-11027-11 ~ ~ 12-11027-12 Part Number See table 12-11029-11 12-11031-11 12-11050-27 Retainers O 15.7 (.62) Door O 4.7 (.185) Stainless Steel 1.4 (.054) 0.4 (.015) O 15.4 (.61) 165.1 (6.50) Tool Nylon O4.6 (.18) O 33.3 (1.31) O 14.3 (.56) 1.4 (.054) Tool Retainer Door O 6.4 (.25) Solid Back-up (Slotted Back-up For Wing Head Screws) Retainer Style Retainer Part Number 304 Stainless steel, passivated 12-6-1 Nylon, black 12-11064-42 Tool Part Number 12-0-20980-11 Dimensions in millimeters (inch) unless otherwise stated Part Number See table www.southco.com/12 17 Series Fast-Lead Screws 338 Studs * Large Material and Finish Low carbon steel, case hardened, zinc plated, chromate plus sealer or stainless steel 1. Determine your outer panel and frame thicknesses: Outer panel P = Frame thickness F = 2. Choose your receptacle 3. Choose the retainer style 4. Find the correct constant in table opposite using the receptacle and retainer selected 5. Add outer panel thickness (P), frame thickness (F), and the constant found in step 4 to determine your total material thickness (TMT) TMT = P+F+Constant 6. Find the TMT value in the ranges given in Column 1 in the part number table 7. Confirm that the outer panel thickness P does not exceed the value given in Column 2. This will confirm that your retainer will install properly beyond the last thread and retain your screw to the outer panel Slot See table www.southco.com/17 15.9 (.63) 11.1 (.44) B ACTUAL SIZE C ACTUAL SIZE O8.0 (.316) Sl Tool Head Recess O 14.3 (.56) 12.7 (.50) Constant Table 34.9 (1.38) 4.6 (.18) 28.6 (1.13) Tool head recess key order separately Part number 29-90-215-10 Retainer type ACTUAL SIZE Receptacle Type Flat Clip Stainless steel 0.38 (.015) 2.2 (.086) 1.5 (.060) Nylon 1.9 (.076) 3.5 (.137) 1.5 (.060) Column 1 Column 2 TMT to be Fastened Max. Slotted Wing Knurled Tool Head Recess A Min. Max. 2.5 (.100) 6.4 (.250) Notes Part Number O 19.4 (.76) Before Knurl A O 6.1 (.241) 5.1 (.200) For stainless steel screw (slotted, wing and knurled ONLY) replace last 2 digits of part number with "12". Example: 17-11-104-12 28.6 (1.13) 3.2 (.13) Nylon wear washer 8. Going across the row in the part number table, find the part number that matches your desired head style For full screw retraction, B must be less than inner panel thickness plus receptacle height Knurled Head ACTUAL SIZE 19.1 O (.75) 2 (.08) 0.5 (.02) Wing Head 5.1 (.200) 2.5 (.100) Screw Assembly Part Number Side Dimensions B C 19.1 (.751) 3.1 (.120) 17-11-104-11 17-12-104-11 17-13-104-11 17-T-104 5.1 (.200) 9.1 (.360) 5.6 (.220) 17-11-106-11 17-12-106-11 17-13-106-11 17-T-106 7.6 (.300) 6.6 (.260) 3.1 (.120) 17-11-204-11 17-12-204-11 17-13-204-11 17-T-204 5.1 (.200) 12.3 (.485) 5.6 (.220) 17-11-206-11 17-12-206-11 17-13-206-11 17-T-206 7.6 (.300) 9.8 (.385) 7.6 (.300) 8.1 (.320) 17-11-208-11 17-12-208-11 17-13-208-11 17-T-208 10.2 (.400) 7.2 (.285) 2.5 (.100) 3.1 (.120) 17-11-304-11 17-12-304-11 17-13-304-11 17-T-304 5.1 (.200) 15.5 (.610) 5.6 (.220) 17-11-306-11 17-12-306-11 17-13-306-11 17-T-306 7.6 (.300) 13 (.510) 8.1 (.320) 17-11-308-11 17-12-308-11 17-13-308-11 17-T-308 10.2 (.400) 10.4 (.410) 10.2 (.400) 10.7 (.420) 17-11-310-11 17-12-310-11 17-13-310-11 17-T-310 12.7 (.500) 7.9 (.310) 2.5 (.100) 3.1 (.120) 17-11-404-11 17-12-404-11 17-13-404-11 17-T-404 5.1 (.200) 18.7 (.735) 5.1 (.200) 5.6 (.220) 17-11-406-11 17-12-406-11 17-13-406-11 17-T-406 7.6 (.300) 16.1 (.635) 7.6 (.300) 8.1 (.320) 17-11-408-11 17-12-408-11 17-13-408-11 17-T-408 10.2 (.400) 13.6 (.535) 10.7 (.420) 17-11-410-11 17-12-410-11 17-13-410-11 17-T-410 12.7 (.500) 11.1 (.435) 12.7 (.500) 13.2 (.520) 17-11-412-11 17-12-412-11 17-13-412-11 17-T-412 15.2 (.600) 8.5 (.335) 15.2 (.600) 15.8 (.620) 17-11-414-11 17-12-414-11 17-13-414-11 17-T-414 17.8 (.700) 6.0 (.235) 5.1 (.200) 7.6 (.300) 10.2 (.400) 9.5 (.375) 12.7 (.500) 15.9 (.625) Dimensions in millimeters (inch) unless otherwise stated 22.3 (.876) 25.4 (1.001) 28.6 (1.126) 17 Series Fast-Lead Screws 339 Receptacles / retainers * Large Side Mount Receptacle 2 Holes O 3.4 (.135) 19.8 (.78) 11.9 (.47) 26.9 (1.06) 15.1 (.594) Door Frame O 8.4 (.33) 48.5 (1.91) Steel, zinc immersion coating or stainless steel Z Max. O 14.3 (.56) 25.4 (1.000) Frame Material and Finish Clip-On Type Receptacle 12.7 (.50) 1.1 (.044) Frame thickness Y 22.4 (.88) 11.9 (.47) Flat Type Receptacle Retainers 11.1 (.44) Min. 2 Holes, O 3.25 (.128) CSK. for O 3.17 (.125) CSK. rivets 44.5 (1.75) 22.4 (.88) 34.9 17.5 (1.375)(.687) O 21.6 (.85) 17.5 (.687) O 17.5 (.69) 0.4 (.015) Doo r 34.9 (1.375) 1.1 (.044) 2 Holes, O 3.4 (.135) Frame Thickness Side mount receptacle O 20.1 (.79) O 8.7 (.34) O 33.3 (1.31) Tool 1.9 (.076) Frame Tool Retainer Door Solid back-up (Slotted back-up for wing head screws) Y Receptacle Part Number Z Max. ~ ~ ~ 1.1 - 2.4 (.045 - .093) 15.7 (.62) 15.0 (.59) 2.4 - 3.6 (.093 - .142) 14.7 (.58) 3.6 - 4.9 (.142 - .191) 13.7 (.54) 4.9 - 6.1 (.191 - .240) 13.5 (.53) 6.1 - 7.3 (.240 - .289) 13.0 (.51) Flat type receptacle - Rivet ~ ~ ~ Flat type receptacle - Weld ~ ~ ~ Clip-on type receptacle Nylon O 6.4 (.25) Weld Rivet Type 1.0 (.042) O 20.6 (.81) For stainless steel retainer O 17.5 (.69) For nylon retainer 168.4 (6.63) O 6.8 Stainless (.255) steel 1.9 (.076) 14.2 (.56) Steel Stainless steel 17-90-101-10 Stainless O 6.8 steel 17-10017-11 (.255) O 21.6 (.85) 17-10027-11 1.9 (.076) 17-10029-11 13.5 (.53) Do or 12.7 (.50) ~ ~ ~ ~Nylon O 6.4 .4 17-10031-11 O 20.1 ~(.25 (.015) 17-10033-11 (.79) ~ O 8.7 17-10015-13 17-10015-14 1.9 (.34) 17-10016-11 ~ (.076) Retainer Style Retainer Part Number Tool Part Number 302 Stainless steel, passivated 17-6-1 17-0-24585-11 Nylon, black 17-10054-42 17-0-21333-11 Dimensions in millimeters (inch) unless otherwise stated Part Number See table O 20.6 (.81) For stainless steel retainer O 17.5 (.69) For nylon retainer O 33.3 (1.31) 168.4 (6.63) Tool Tool Retainer Door Solid back-up (Slotted back-up for wing head screws) www.southco.com/17