332
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
09 Series Fast-Lead Screws
Studs · Small
www.southco.com/09
Column 1 Column 2 Screw Assembly Part Number Dimensions
TMT Outer
Panel
P
Slotted Knurled
Tool
Head
Recess
Phillips
Recess A B C
Min. Max.
1.3 (.050) 3.2 (.125) 0.9 (.035) 09-11-102-11 09-13-102-11 09-T-102 09-P-102 2.5 (.100) 5.0 (.197) 10.7
(.422)
2.5 (.100) 3.2 (.125) 2.2 (.085) 09-11-103-11 09-13-103-11 09-T-103 09-P-103 3.8 (.150) 3.7 (.147)
1.3 (.050) 6.4 (.250) 0.9 (.035) 09-11-202-11 09-13-202-11 09-T-202 09-P-202 2.5 (.100) 8.2 (.322)
13.9
(.547)
2.5 (.100) 6.4 (.250) 2.2 (.085) 09-11-203-11 09-13-203-11 09-T-203 09-P-203 3.8 (.150) 6.9 (.272)
3.8 (.150) 6.4 (.250) 3.4 (.135) 09-11-204-11 09-13-204-11 09-T-204 09-P-204 5.1 (.200) 5.6 (.222)
5.1 (.200) 6.4 (.250) 4.7 (.185) 09-11-205-11 09-13-205-11 09-T-205 09-P-205 6.4 (.250) 4.4 (.172)
1.3 (.050) 9.5 (.375) 0.9 (.035) 09-11-302-11 09-13-302-11 09-T-302 09-P-302 2.5 (.100) 11.4 (.447)
17.1
( . 6 7 2 )
2.5 (.100) 9.5 (.375) 2.2 (.085) 09-11-303-11 09-13-303-11 09-T-303 09-P-303 3.8 (.150) 10.1 (.397)
3.8 (.150) 9.5 (.375) 3.4 (.135) 09-11-304-11 09-13-304-11 09-T-304 09-P-304 5.1 (.200) 8.8 (.347)
5.1 (.200) 9.5 (.375) 4.7 (.185) 09-11-305-11 09-13-305-11 09-T-305 09-P-305 6.4 (.250) 7.3 (.297)
7.6 (.300) 9.5 (.375) 7.2 (.285) 09-11-307-11 09-13-307-11 09-T-307 09-P-307 8.9 (.350) 5.0 (.197)
BC
A
Ø 7.7
(.30)
Ø 3.5
(.136)
Nylon
Wear
Washer
0.5
(.020)
1.8
(.070)
Ø 7.9 (.31)
Before
knurl
7.9
(.31)
Ø 9.5 (.375)
3.2
(.125)
Ø 9.5 (.375)
3.2
(.125)
3.2 (.125)
Ø 4.8
(.188)
Tool head recess key
order separately
Part Number: 29-90-214-10
22.2
(.88)
26.5
(1.04)
9.5 (.38) No. 2 Phillips Recess
1.3 (.05)
Material and Finish
Low carbon steel, case hardened,
zinc plated, chromate plus sealer or
stainless steel
How to Specify:
1. Determine your outer panel and
frame thicknesses:
Outer panel P =
Frame thickness F =
2. Choose your receptacle
3. Choose the retainer style
4. Find the correct constant in table
opposite using the receptacle and
retainer selected
5. Add outer panel thickness
(P), frame thickness (F), and
the constant found in step 4 to
determine your total material
thickness (TMT)
TMT = P+F+Constant
6. Find the TMT value in the ranges
given in Column 1 in the part
number table
7. Confirm that the outer panel
thickness P does not exceed the
value given in Column 2. This will
confirm that your retainer will install
properly beyond the last thread and
retain your screw to the outer panel
8. Going across the row in the part
number table, find the part number
that matches your desired head
style
Part Number
See table
Notes
For full screw retraction, B must
be less than frame thickness plus
receptacle height
For stainless steel screw (slotted,
and knurled ONLY) replace last 2
digits of part number with “26”.
Example: 09-11-102-26
Constant Table
Retainer Type Receptacle Type
Flat Rivet or Weld Clip Saddle Press-In
Stainless steel 0.3 (.012) 1.0 (.032) 4.5 (.177) -1.3 (-.050)
Nylon 1.1 (.043) 1.6 (.063) 5.3 (.208) -0.5 (-.020)
Panel
Frame
P
Total material
Thickness
TMT
(Total material
Thickness)
Captive screw
Receptacle
Retainer Nylon wear
Washer Door
F
Slot Tool head Recess Phillips RecessKnurled Head
ACTUAL SIZE
ACTUAL SIZE
333
Dimensions in millimeters (inch) unless otherwise stated
09 Series Fast-Lead Screws
Receptacles / retainers · Small
Material and Finish
Steel, zinc immersion coating or
stainless steel
Installation Notes
See page 497 for self-clinching
installation guidelines
www.southco.com/09
Rivet Weld
2 Holes,
Ø 2.7 (.105)
0.51
(.020)
22.2
(.88)
7.9
(.31)
15.9
(.625)
7.9
(.312)
2 Holes, Ø 2.6 for 2.5 mm hardware or
Ø .098 for Ø .094 rivet
CSK other side to suit
Ø9.5 (.375)
7.9
(.312)
15.9
(.625)
Flat Type Receptacle Clip-On Type Receptacle
0.8 (.031) Min.
2.4 (.094) Max.
Ø 6.4 (.250) Min.
Ø 7.1 (.281) Max.
4.8 (.19) Min.
6.4 (.25) Max.
12.7
(.50)
0.5
(.020)
19.8
(.78)
7.9
(.31)
Frame
Self-Clinching Receptacle
Free Running
Ø 7.9 (.312)
Over knurl
Ø 7.1 (.278)
4.8 (.19)
1.3(.05)
1.2 (.048)
Min. frame
thickness
Ø 7.1 (.281 )
Do NOT chamfer
back side of hole
+0.1
+.003
Saddle Type Receptacle
2 Holes,
Ø 2.7 (.105)
0.5 (.020)
6.4
(.25)
15.9
(.625)
7.9
(.312)
7.9
(.31)
22.2
(.88)
15.9
(.625) 7.9
(.312)
2 Holes, Ø 2.6 for 2.5 mm hardware or
Ø .098 for Ø .094 rivet
CSK other side to suit
Ø 9.5 (.375)
Retainers
Stainless
Steel
Nylon
Ø 33.3
(1.31)
165 (6.50)
Ø 14.3 (.56)
Retainer
Tool
Tool
Solid back-up
(Slotted back-up for wing head screws)
Door
Ø 12.7
(.50)
Ø
3.9
(.152)
Ø
5.2
(.203)
Door
Ø
12.7
(.50)
Ø
1.1
(.043)
0.3
(.012)
1.1
(.043)
Ø
3.6
(.14)
Type Receptacle Part Number
Steel Stainless steel
Flat receptacle rivet-on 09-41-101-11 09-41-101-24
Flat receptacle weld-on ~09-41-103-24
Clip-on receptacle 09-43-101-11 09-43-101-24
Press-in receptacle 09-44-101-11 ~
Saddle type receptacle 09-42-101-11 09-42-101-24
Part Number
See table
Retainer Style Retainer Part
Number
Tool Part
Number
302
Stainless steel,
passivated
09-6-1 12-0-20980-11
Nylon, black 09-49-102-42
334
Dimensions in millimeters (inch) unless otherwise stated
12 Series Fast-Lead Screws
Studs · Medium
Material and Finish
Low carbon steel, case hardened,
zinc plate, chromate plus sealer or
stainless steel
How to Specify:
1. Determine your outer panel and
frame thicknesses:
Outer panel P =
Frame thickness F =
2. Choose your receptacle
3. Choose the retainer style
4. Find the correct constant in table
opposite using the receptacle and
retainer selected
5. Add outer panel thickness
(P), frame thickness (F), and
the constant found in step 4 to
determine your total material
thickness (TMT)
TMT = P+F+Constant
6. Find the TMT value in the ranges
given in Column 1 in the part
number table
7. Confirm that the outer panel
thickness P does not exceed the
value given in Column 2. This will
confirm that your retainer will install
properly beyond the last thread and
retain your screw to the outer panel
8. Going across the row in the part
number table, find the part number
that matches your desired head
style
Notes
For full screw retraction, B must be
less than inner panel thickness plus
receptacle height
For stainless steel screw (slot,
wing and knurled ONLY) replace last
2 digits of part number with “12”.
Example: 12-11-102-12
www.southco.com/12
BC
A
12.7
(.50)
Ø
4.4
(.172)
Ø5.9
(.232)
Ø
Nylon
wear
washer
0.5
(.02)
2.7
(.11) 22.2 (.88)
12.7 (.50)
Ø 12.7 (.50)
Before knurl
11.1 (.44)
11.1 (.44)
3.6
(.14)
Ø
Slot
2 (.08) Wide x 2.4 (.09) deep
11.1 (.44)
3.6
(.14)
Ø
Slotted
Head
Wing
Head
Knurled
Head
Phillips
Head
Toolhead
Recess
Tool head recess key
order separately
Part number 29-90-214-10
22.2 (.88)
26.7
(1.05)
9.5
(.38)
2 (.08)
BC
A
12.7
(.50)
Ø
4.4
(.172)
Ø5.9
(.232)
Ø
Nylon
wear
washer
0.5
(.02)
2.7
(.11) 22.2 (.88)
12.7 (.50)
Ø 12.7 (.50)
Before knurl
11.1 (.44)
11.1 (.44)
3.6
(.14)
Ø
Slot
2 (.08) Wide x 2.4 (.09) deep
11.1 (.44)
3.6
(.14)
Ø
Slotted
Head
Wing
Head
Knurled
Head
Phillips
Head
Toolhead
Recess
Tool head recess key
order separately
Part number 29-90-214-10
22.2 (.88)
26.7
(1.05)
9.5
(.38)
2 (.08)
Constant Table
Retainer type Receptacle Type
Flat Clip Saddle Side Press-In
Stainless steel 0.38 (.015) 1.1 (.045) 4.0 (.156) 1.5 (.060) -1.3 (-.050)
Nylon 1.4 (.054) 2.0 (.079) 5.31 (.210) 1.5 (.060) -0.5 (-.020)
Panel
Frame
P
Total material
Thickness
TMT
(Total material
Thickness)
Captive screw
Receptacle
Retainer Nylon wear
Washer Door
F
Slot
Tool head Recess Phillips Recess
Knurled HeadWing Head
ACTUAL SIZE
ACTUAL SIZE
ACTUAL SIZE
ACTUAL SIZE
335
Dimensions in millimeters (inch) unless otherwise stated
Part Number
See table
Column 1 Column 2 Screw Assembly Part Number Dimensions
TMT to be Fastened Max. Thickness of
Outer Panel P Slotted Wing Knurled Tool Head
Recess
Phillips
Recess A B C
Min. Max.
1.3 (.050) 3.2
(.125)
0.6 (.025) 12-11-102-11 12-12-102-11 12-13-102-11 12-T-102 12-P-102 2.5 (.100) 5.8 (.228) 12.3 (.486)
2.5 (.100) 1.9 (.075) 12-11-103-11 12-12-103-11 12-13-103-11 12-T-103 12-P-103 3.8 (.150) 4.5 (.178)
1.3 (.050)
6.4
(.250)
0.6 (.025) 12-11-202-11 12-12-202-11 12-13-202-11 12-T-202 12-P-202 2.5 (.100) 9.0 (.353)
15.5 (.611)
2.5 (.100) 1.9 (.075) 12-11-203-11 12-12-203-11 12-13-203-11 12-T-203 12-P-203 3.8 (.150) 7.7 (.303)
3.8 (.150) 3.2 (.125) 12-11-204-11 12-12-204-11 12-13-204-11 12-T-204 12-P-204 5.1 (.200) 6.4 (.253)
5.1 (.200) 4.5 (.175) 12-11-205-11 12-12-205-11 12-13-205-11 12-T-205 12-P-205 6.4 (.250) 5.2 (.203)
1.3 (.050)
9.5
(.375)
0.6 (.025) 12-11-302-11 12-12-302-11 12-13-302-11 12-T-302 12-P-302 2.5 (.100) 12.1 (.478)
18.7 (.736)
2.5 (.100) 1.9 (.075) 12-11-303-11 12-12-303-11 12-13-303-11 12-T-303 12-P-303 3.8 (.150) 10.9 (.428)
3.8 (.150) 3.2 (.125) 12-11-304-11 12-12-304-11 12-13-304-11 12-T-304 12-P-304 5.1 (.200) 9.6 (.378)
5.1 (.200) 4.5 (.175) 12-11-305-11 12-12-305-11 12-13-305-11 12-T-305 12-P-305 6.4 (.250) 8.3 (.328)
7.6 (.300) 7.0 (.275) 12-11-307-11 12-12-307-11 12-13-307-11 12-T-307 12-P-307 8.9 (.350) 5.8 (.228)
2.5 (.100)
12.7
(.500)
1.9 (.075) 12-11-403-11 12-12-403-11 12-13-403-11 12-T-403 12-P-403 3.8 (.150) 14.1 (.553)
21.9 (.861)
3.8 (.150) 3.2 (.125) 12-11-404-11 12-12-404-11 12-13-404-11 12-T-404 12-P-404 5.1 (.200) 12.8 (.503)
5.1 (.200) 4.5 (.175) 12-11-405-11 12-12-405-11 12-13-405-11 12-T-405 12-P-405 6.4 (.250) 11.5 (.453)
7.6 (.300) 7.0 (.275) 12-11-407-11 12-12-407-11 12-13-407-11 12-T-407 12-P-407 8.9 (.350) 9.0 (.353)
10.2 (.400) 9.5 (.375) 12-11-409-11 12-12-409-11 12-13-409-11 12-T-409 12-P-409 11.4 (.450) 6.4 (.253)
2.5 (.100)
15.9
(.625)
1.9 (.075) 12-11-503-11 12-12-503-11 12-13-503-11 12-T-503 12-P-503 3.8 (.150) 17.2 (.678)
25 (.986)
3.8 (.150) 3.2 (.125) 12-11-504-11 12-12-504-11 12-13-504-11 12-T-504 12-P-504 5.1 (.200) 16.0 (.628)
5.1 (.200) 4.5 (.175) 12-11-505-11 12-12-505-11 12-13-505-11 12-T-505 12-P-505 6.4 (.250) 14.7 (.578)
7.6 (.300) 7.0 (.275) 12-11-507-11 12-12-507-11 12-13-507-11 12-T-507 12-P-507 8.9 (.350) 12.1 (.478)
10.2 (.400) 9.5 (.375) 12-11-509-11 12-12-509-11 12-13-509-11 12-T-509 12-P-509 11.4 (.450) 9.6 (.378)
12.7 (.500) 12.1 (.475) 12-11-511-11 12-12-511-11 12-13-511-11 12-T-511 12-P-511 14 (.550) 7.1 (.278)
2.5 (.100)
19.1
(.750)
1.9 (.075) 12-11-603-11 12-12-603-11 12-13-603-11 12-T-603 12-P-603 3.8 (.150) 20.4 (.803)
28.2 (1.111)
3.8 (.150) 3.2 (.125) 12-11-604-11 12-12-604-11 12-13-604-11 12-T-604 12-P-604 5.1 (.200) 19.1 (.753)
5.1 (.200) 4.5 (.175) 12-11-605-11 12-12-605-11 12-13-605-11 12-T-605 12-P-605 6.4 (.250) 17.9 (.703)
7.6 (.300) 7.0 (.275) 12-11-607-11 12-12-607-11 12-13-607-11 12-T-607 12-P-607 8.9 (.350) 15.3 (.603)
10.2 (.400) 9.5 (.375) 12-11-609-11 12-12-609-11 12-13-609-11 12-T-609 12-P-609 11.4 (.450) 12.8 (.503)
12.7 (.500) 12.1 (.475) 12-11-611-11 12-12-611-11 12-13-611-11 12-T-611 12-P-611 14 (.550) 10.2 (.403)
15.3 (.600) 14.6 (.575) 12-11-613-11 12-12-613-11 12-13-613-11 12-T-613 12-P-613 16.5 (.650) 7.7 (.303)
17.8 (.700) 17.2 (.675) 12-11-615-11 12-12-615-11 12-13-615-11 12-T-615 12-P-615 19.1 (.750) 5.2 (.203)
www.southco.com/12
336
Dimensions in millimeters (inch) unless otherwise stated
12 Series Fast-Lead Screws
Receptacles · Medium
Material and Finish
Steel, zinc immersion coating or
stainless steel
Side mount receptacle: 1064 steel,
zinc immersion coating
Press-in receptacle: low carbon
steel, case hardened and zinc plate,
chromate plus sealer
Installation Notes
See page 497 for self-clinching
installation guidelines
www.southco.com/12
Part Number
See table
Side Mount Receptacle Flat Type Receptacle
Self-Clinching Receptacle
Free Running
Saddle Type Receptacle
19.1
(.750)
32.3
(1.27)
Frame
8.4
(.33)
8.4
(.33)
17.0
(.67)
Ø 3.3
(.130) 17.0
(.67)
8.3 (.325)
Ø 6.4
(.25)
Door
Rivet Weld
Ø H
0.6
(.025)
27
(1.06)
12.7
(.50)
Ø H
Ø 12.7 (.50)
9.5 (.38)
Min.
19.1
(.750) 9.5 (.375)
9.5 (.375)
19.1
(.750)
Ø 10.5
(.415)
4.7
(.19) 1.6
(.06)
Ø 9.5
(.372)
Ø 9.5
(.375 )
+0.1
-0.0
+.003
-.000
1.53 (.060)
Min. sheet
thickness
Rivet
Weld
Ø
3.43 (.135)
27
(1.06)
12.7
(.50)
7 (.28)
0.5 (.02)
Ø
H
Ø 12.7 (.50)
9.5 (.38) Min.
19.1
(.750)
19.1
(.750)
9.5 (.375)
9.5 (.375)
Type Ø H Receptacle Part Number
Steel Stainless steel
Side mount receptacle ~12-90-101-10 ~
Flat receptacle rivet 2.7 (.105) 12-11015-13 12-11015-14
3.4 (.135) 12-11020-11 12-11020-13
Flat receptacle weld-on ~ ~ 12-11016-11
Press-in receptacle ~12-44-101-11 ~
Saddle receptacle rivet 3.4 (.135) 12-11043-11 12-11043-12
Saddle receptacle weld-on ~ ~ 12-11044-12
337
Dimensions in millimeters (inch) unless otherwise stated
Retainers
Clip-On Type Receptacle
U Type Narrow Flange
Ø 11.1
(.44)
.6
(.025)
12.7
(.50)
Z
Max.
Frame
thickness A
B
4.8
(.19)
Min.
Ø 7.1 (.281)
Min.
Ø 7.9 (.312)
Max.
6.4 (.25) Max.
14.3
(.56)
25.4
(1.00)
4.1
(.160)
Frame thickness
Solid Back-up
(Slotted Back-up For Wing Head Screws)
Stainless
Steel
Nylon
Ø 33.3
(1.31)
165.1 (6.50)
Ø 14.3 (.56)
Retainer
Tool
Tool
Door
Ø
6.4
(.25)
Door
Ø
15.7
(.62)
Ø
4.7
(.185)
Ø
15.4
(.61)
1.4
(.054)
0.4
(.015)
Ø
4.6
(.18)
1.4
(.054)
Type Frame Thickness A B Z Max. Receptacle Part Number
Steel Stainless steel
Clip-on receptacle - J .8 (.031) to 2.8 (.109) 24.8 (.98)
14.2 (.56)
12.7 (.50) 12-11025-11 ~
Clip-on receptacle - U
.8 (.031) to 2.8 (.109)
25.9 (1.02)
12-11017-11 12-11017-12
2.8 (.109)- 4.1 (.161) 11.9 (.47) 12-11027-11 ~
2.8 (.109)- 4.1 (.161) ~12-11027-12
4.1 (.161)- 5.5 (.213) 24.8 (.98) 13.5 (.53) 11.1 (.44) 12-11029-11
5.4 (.213)- 6.7 (.265) 24.5 (.97) 13.01 (.51) 12-11031-11
Clip-on receptacle - Narrow flange 0.8 (.031)- 2.8 (.109) ~ ~ ~ 12-11050-27
12 Series Fast-Lead Screws
Receptacles / retainers · Medium
www.southco.com/12
Retainer Style Retainer Part Number Tool Part Number
304 Stainless steel, passivated 12-6-1 12-0-20980-11
Nylon, black 12-11064-42
U Type
Narrow Flange
Part Number
See table
Part Number
See table
Material and Finish
Steel, zinc immersion coating or
stainless steel
J Type
338
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL
SIZE
ACTUAL
SIZE
ACTUAL
SIZE
17 Series Fast-Lead Screws
Studs · Large
Material and Finish
Low carbon steel, case hardened,
zinc plated, chromate plus sealer or
stainless steel
1. Determine your outer panel and
frame thicknesses:
Outer panel P =
Frame thickness F =
2. Choose your receptacle
3. Choose the retainer style
4. Find the correct constant in table
opposite using the receptacle and
retainer selected
5. Add outer panel thickness
(P), frame thickness (F), and
the constant found in step 4 to
determine your total material
thickness (TMT)
TMT = P+F+Constant
6. Find the TMT value in the ranges
given in Column 1 in the part
number table
7. Confirm that the outer panel
thickness P does not exceed the
value given in Column 2. This will
confirm that your retainer will install
properly beyond the last thread and
retain your screw to the outer panel
8. Going across the row in the part
number table, find the part number
that matches your desired head
style
Notes
For full screw retraction, B must be
less than inner panel thickness plus
receptacle height
For stainless steel screw (slotted,
wing and knurled ONLY) replace last
2 digits of part number with “12”.
Example: 17-11-104-12
Part Number
See table
www.southco.com/17
Column 1 Column 2 Screw Assembly Part Number Dimensions
TMT to be
Fastened Max. Slotted Wing Knurled
Tool
Head
Recess
A B C
Min. Max.
2.5 (.100) 6.4
(.250)
3.1 (.120) 17-11-104-11 17-12-104-11 17-13-104-11 17-T-104 5.1 (.200) 9.1 (.360) 19.1
(.751)
5.1 (.200) 5.6 (.220) 17-11-106-11 17-12-106-11 17-13-106-11 17-T-106 7.6 (.300) 6.6 (.260)
2.5 (.100)
9.5
(.375)
3.1 (.120) 17-11-204-11 17-12-204-11 17-13-204-11 17-T-204 5.1 (.200) 12.3 (.485)
22.3
(.876)
5.1 (.200) 5.6 (.220) 17-11-206-11 17-12-206-11 17-13-206-11 17-T-206 7.6 (.300) 9.8 (.385)
7.6 (.300) 8.1 (.320) 17-11-208-11 17-12-208-11 17-13-208-11 17-T-208 10.2 (.400) 7.2 (.285)
2.5 (.100)
12.7
(.500)
3.1 (.120) 17-11-304-11 17-12-304-11 17-13-304-11 17-T-304 5.1 (.200) 15.5 (.610)
25.4
(1.001)
5.1 (.200) 5.6 (.220) 17-11-306-11 17-12-306-11 17-13-306-11 17-T-306 7.6 (.300) 13 (.510)
7.6 (.300) 8.1 (.320) 17-11-308-11 17-12-308-11 17-13-308-11 17-T-308 10.2 (.400) 10.4 (.410)
10.2 (.400) 10.7 (.420) 17-11-310-11 17-12-310-11 17-13-310-11 17-T-310 12.7 (.500) 7.9 (.310)
2.5 (.100)
15.9
(.625)
3.1 (.120) 17-11-404-11 17-12-404-11 17-13-404-11 17-T-404 5.1 (.200) 18.7 (.735)
28.6
(1.126)
5.1 (.200) 5.6 (.220) 17-11-406-11 17-12-406-11 17-13-406-11 17-T-406 7.6 (.300) 16.1 (.635)
7.6 (.300) 8.1 (.320) 17-11-408-11 17-12-408-11 17-13-408-11 17-T-408 10.2 (.400) 13.6 (.535)
10.2 (.400) 10.7 (.420) 17-11-410-11 17-12-410-11 17-13-410-11 17-T-410 12.7 (.500) 11.1 (.435)
12.7 (.500) 13.2 (.520) 17-11-412-11 17-12-412-11 17-13-412-11 17-T-412 15.2 (.600) 8.5 (.335)
15.2 (.600) 15.8 (.620) 17-11-414-11 17-12-414-11 17-13-414-11 17-T-414 17.8 (.700) 6.0 (.235)
BC
A
19.1
(.75)
Ø
Nylon
wear
washer
0.5
(.02)
3.2
(.13)
28.6 (1.13)
15.9 (.63)
Ø 19.4 (.76)
Before Knurl
11.1 (.44)
14.3 (.56)
4.6
(.18)
Ø
6.1
(.241) Ø8.0 (.316)
Ø
Slot 2 (.08) wide X 3.2 (.13) deep
Tool head recess key
order separately
Part number 29-90-215-10
28.6
(1.13)
34.9
(1.38)
12.7
(.50)
2 (.08)
Constant Table
Retainer type Receptacle Type
Flat Clip Side
Stainless steel 0.38 (.015) 2.2 (.086) 1.5 (.060)
Nylon 1.9 (.076) 3.5 (.137) 1.5 (.060)
Slot
Tool Head Recess
Knurled HeadWing Head
ACTUAL
SIZE
339
Dimensions in millimeters (inch) unless otherwise stated
17 Series Fast-Lead Screws
Receptacles / retainers · Large
Material and Finish
Steel, zinc immersion coating or
stainless steel
www.southco.com/17
Retainer Style Retainer Part Number Tool Part Number
302 Stainless steel, passivated 17-6-1 17-0-24585-11
Nylon, black 17-10054-42 17-0-21333-11
Side Mount Receptacle Clip-On Type Receptacle
Flat Type Receptacle Retainers
25.4
(1.000)
2 Holes
Ø 3.4 (.135)
48.5
(1.91)
Frame
19.8
(.78) 11.9
(.47)
26.9
(1.06)
11.9
(.47)
15.1
(.594)
Ø 8.4
(.33)
Door
Y
Ø 14.3
(.56)
Frame
Z
Max.
1.1
(.044)
12.7
(.50)
22.4
(.88)
Frame thickness
Rivet Weld
44.5
(1.75)
2 Holes,
Ø 3.4 (.135)
34.9
(1.375)
22.4
(.88)
17.5
(.687)
1.1
(.044) 1.0
(.042)
2 Holes,
Ø 3.25 (.128) CSK. for
Ø 3.17 (.125) CSK. rivets
Ø 17.5 (.69)
11.1
(.44)
Min.
17.5
(.687)
34.9
(1.375)
Frame
Solid back-up
(Slotted back-up for wing head screws)
Stainless
steel
Nylon
Ø 33.3
(1.31)
168.4 (6.63)
Ø 20.6 (.81) For stainless steel retainer
Ø 17.5 (.69) For nylon retainer
Retainer
Tool
Tool
Door
Door
Ø
21.6
(.85)
Ø
6.8
(.255)
Ø
8.7
(.34)
1.9
(.076)
0.4
(.015)
Ø
20.1
(.79)
Ø
6.4
(.25)
1.9
(.076)
Type Frame Thickness YZ Max. Receptacle Part Number
Steel Stainless steel
Side mount receptacle ~ ~ ~ 17-90-101-10 ~
Clip-on type receptacle
1.1 - 2.4 (.045 - .093) 15.7 (.62) 15.0 (.59) 17-10017-11 ~
2.4 - 3.6 (.093 - .142) 14.7 (.58) 14.2 (.56) 17-10027-11 ~
3.6 - 4.9 (.142 - .191) 13.7 (.54) 17-10029-11 ~
4.9 - 6.1 (.191 - .240) 13.5 (.53) 13.5 (.53) 17-10031-11 ~
6.1 - 7.3 (.240 - .289) 13.0 (.51) 12.7 (.50) 17-10033-11 ~
Flat type receptacle - Rivet ~ ~ ~ 17-10015-13 17-10015-14
Flat type receptacle - Weld ~ ~ ~ 17-10016-11 ~
Solid back-up
(Slotted back-up for wing head screws)
Stainless
steel
Nylon
Ø 33.3
(1.31)
168.4 (6.63)
Ø 20.6 (.81) For stainless steel retainer
Ø 17.5 (.69) For nylon retainer
Retainer
Tool
Tool
Door
Door
Ø
21.6
(.85)
Ø
6.8
(.255)
Ø
8.7
(.34)
1.9
(.076)
.4
(.015)
Ø
20.1
(.79)
Ø
6.4
(.25
1.9
(.076)
Part Number
See table