US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest infor
mation.
Shielded Power Inductors
–
LPS5015
Document 585-1
Document 585-1 Revised 09/02/15
DCR SRF Isat (A)5 Irms (A)6
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
LPS5015-102MR_ 1.0 0.050 183 3.6 3.8 3.9 1.90 2.65
LPS5015-132MR_ 1.3 0.065 150 2.5 2.6 2.8 1.70 2.35
LPS5015-182MR_ 1.8 0.075 128 2.6 2.8 2.9 1.50 2.15
LPS5015-222MR_ 2.2 0.090 116 2.4 2.6 2.7 1.40 2.00
LPS5015-332MR_ 3.3 0.125 88 1.9 2.0 2.0 1.30 1.80
LPS5015-472MR_ 4.7 0.150 73 1.6 1.7 1.8 1.20 1.62
LPS5015-562MR_ 5.6 0.175 67 1.6 1.6 1.6 1.10 1.45
LPS5015-682MR_ 6.8 0.225 57 1.3 1.4 1.5 0.90 1.25
LPS5015-822MR_ 8.2 0.280 49 1.3 1.3 1.4 0.85 1.05
LPS5015-103MR_ 10 0.300 44 1.2 1.3 1.3 0.80 0.95
LPS5015-123MR_ 12 0.350 40 1.0 1.1 1.2 0.75 0.84
LPS5015-153MR_ 15 0.360 38 0.80 0.84 0.86 0.73 0.84
LPS5015-183MR_ 18 0.550 35 0.75 0.77 0.80 0.70 0.83
LPS5015-223MR_ 22 0.675 31 0.70 0.73 0.75 0.60 0.82
LPS5015-333MR_ 33 0.750 24 0.55 0.59 0.60 0.50 0.70
LPS5015-473MR_ 47 1.00 18 0.46 0.48 0.49 0.45 0.57
LPS5015-563MR_ 56 1.13 17 0.40 0.43 0.45 0.40 0.52
LPS5015-683MR_ 68 1.45 15 0.33 0.38 0.39 0.35 0.47
LPS5015-104MR_ 100 1.95 12 0.30 0.33 0.34 0.30 0.42
LPS5015-124MR_ 120 2.50 10 0.25 0.28 0.30 0.27 0.37
LPS5015-154MR_ 150 3.40 9.3 0.23 0.25 0.26 0.25 0.33
LPS5015-224MR_ 220 4.50 7.3 0.20 0.21 0.22 0.22 0.29
LPS5015-334MR_ 330 7.40 5.7 0.15 0.17 0.18 0.17 0.22
LPS5015-474MR_ 470 7.50 4.9 0.12 0.12 0.13 0.16 0.21
LPS5015-564MR_ 560 8.50 4.3 0.10 0.11 0.12 0.14 0.190
LPS5015-684MR_ 680 10.6 4.0 0.10 0.11 0.11 0.13 0.175
LPS5015-105MR_ 1000 15.0 3.2 0.080 0.090 0.093 0.10 0.150
LPS5015-155MR_ 1500 25.0 2.5 0.080 0.086 0.088 0.090 0.140
LPS5015-185MR_ 1800 28.0 2.2 0.078 0.083 0.086 0.085 0.130
LPS5015-225MR_ 2200 36.0 2.1 0.072 0.078 0.080 0.065 0.090
• Very low DCR; excellent current handling
• 5.0 × 5.0 mm footprint; less than 1.5 mm tall
Designer’s Kit C350 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 102 – 107 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth
Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
1. Please specify termination and packaging codes:
LPS5015-225MRC
Termination: R = RoHS compliant matte tin over nickel
over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481
embossed plastic tape 1000 parts
per full reel).
B = Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D = 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (3500 parts per full
reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agi-
lent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified inductance
drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from
25°C ambient. This information is for reference only and
does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Sample
& buy
Support
& FAQ
Web
page
Tools &
softw
are
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest infor
mation.
Shielded Power Inductors
–
LPS5015 Series
Document 585-2
Typical L vs CurrentTypical L vs Frequency
1
10
10000
1000
100
0.01 0.1
110
Frequency (MHz)
Inductance (µH)
10 µH
3.3 µH
33 µH
1000 µH
3300 µH
330 µH
100 µH
1
10
10000
1000
100
0.01 0.1
110
Current (A)
Inductance (µH)
3.3 µH
33 µH
330 µH
1000 µH
3300 µH
100 µH
10 µH
Document 585-2 Revised 09/02/15
Dimensions are in inches
mm
0.189 ±0.003
4,80 ±0,076
0.0551 ±0.004
1,4 ±0,1
Winding
direction
Dash
number Internal
code
XXX X
0.189 ±0.003
4,80 ±0,076 *
*
0.060
1,50
0.039
1,00 typ
typ
0.039
1,00
*
0.217
5,51
0.134
3,40
0.134
3,40
0.134
3,40
0.060
1,52
0.217
5,51
0.0665
1,689
Recommended
Land Pattern
0.134
3,40
Dimensions are of the case not including
the termination. Formaximum overall
dimensions including the termination, add
0.005 in/0,13 mm.
Foroptional tin-lead and tin-silver-copper
terminations,dimensions are forthe
mounted part. Dimensions before mounting
can be an additional 0.005 inch/0,13 mm).
*
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth
NOTE NEW PART ORIENTATION Parts are rotated 90° in the
packaging tape compared to previous versions of this product.
NEW OLD
123
123
123
123 123 123
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Coilcraft:
LPS5015-475MLB LPS5015-222MLB LPS5015-472MLB LPS5015-224MLB LPS5015-154MLC LPS5015-564MLC
LPS5015-155MLC LPS5015-334MLB LPS5015-155MLB LPS5015-132MLB LPS5015-822MLB LPS5015-564MLB
LPS5015-563MLC LPS5015-222MLC LPS5015-183MLC LPS5015-153MLB LPS5015-332MLB LPS5015-124MLB
LPS5015-472MLC LPS5015-684MLB LPS5015-105MLC LPS5015-333MLC LPS5015-474MLC LPS5015-474MLB
LPS5015-683MLC LPS5015-682MLC LPS5015-123MLB LPS5015-183MLB LPS5015-473MLC LPS5015-562MLC
LPS5015-153MLC LPS5015-104MLC LPS5015-182MLC LPS5015-185MLC LPS5015-225MLB LPS5015-562MLB
LPS5015-103MLC LPS5015-334MLC LPS5015-475MLC LPS5015-182MLB LPS5015-223MLB LPS5015-333MLB
LPS5015-154MLB LPS5015-683MLB LPS5015-105MLB LPS5015-822MLC LPS5015-224MLC LPS5015-332MLC
LPS5015-335MLC LPS5015-223MLC LPS5015-124MLC LPS5015-682MLB LPS5015-684MLC LPS5015-103MLB
LPS5015-473MLB LPS5015-185MLB LPS5015-335MLB LPS5015-123MLC LPS5015-563MLB LPS5015-104MLB
LPS5015-132MLC LPS5015-225MLC LPS5015-132MRB LPS5015-132MRC LPS5015-102MRC LPS5015-474MRC
LPS5015-472MRC LPS5015-224MRB LPS5015-103MRB LPS5015-562MRB LPS5015-332MRC LPS5015-683MRC
LPS5015-104MRC LPS5015-124MRB LPS5015-153MRC LPS5015-182MRC LPS5015-222MRC LPS5015-
332MRB LPS5015-472MRB LPS5015-474MRB LPS5015-563MRB LPS5015-563MRC LPS5015-562MRC
LPS5015-682MRC LPS5015-225MRB LPS5015-224MRC LPS5015-225MRC LPS5015-333MRB LPS5015-334MRB
LPS5015-473MRB LPS5015-473MRC LPS5015-183MRC LPS5015-185MRB LPS5015-185MRC LPS5015-
222MRB LPS5015-223MRB LPS5015-223MRC LPS5015-154MRB LPS5015-154MRC LPS5015-155MRB
