R99-07G5D - OMRON - Datasheet.Live

■A high-capacity, high-withstand voltage relay

compatible with mometary voltage drops

■No contact chattering for mometary voltage

drops up to 50% of rated voltage

■UL Class B construction standard

■Wide-range AC-activated coil that handles

100 to 120 VAC at either 50 or 60 Hz

■Miniature hinge for maximum switching

capacity, particularly for inductive loads

■Flame resistant materials (UL94V-0-qualify-

ing) used for all insulation material

■Quick-connect, screw, and PCB terminals

available

■Standard models are UL, CSA, and TUV

approved; VDE versions now available

■Conforming to IEC 950

General Purpose Relay G7L

Ordering Information

Part number

Type Contact form Quick-connect terminal Screw terminal PCB terminal

E bracket SPST-NO G7L-1A-T-CB (see note 1) G7L-1A-B-CB (see note 1) —

DPST-NO G7L-2A-T-CB (see note 1) G7L-2A-B-CB (see note 1) —

E bracket SPST-NO G7L-1A-TJ-CB (see note 1) G7L-1A-BJ-CB (see note 1) —

(with test button) DPST-NO G7L-2A-TJ-CB (see note 1) G7L-2A-BJ-CB (see note 1) —

Upper bracket SPST-NO G7L-1A-TUB-CB G7L-1A-BUB-CB —

DPST-NO G7L-2A-TUB-CB G7L-2A-BUB-CB —

Upper bracket SPST-NO G7L-1A-TUBJ-CB G7L-1A-BUBJ-CB —

(with test button) DPST-NO G7L-2A-TUBJ-CB G7L-2A-BUBJ-CB —

PCB mounting SPST-NO — — G7L-1A-P-CB

DPST-NO — — G7L-2A-P-CB

Replaces G5D series.

Note: 1. E bracket or socket must be used for mounting (part number R99-07G5D). Refer to “Accessories” section for options and

par t numbers.

2. For VDE approved versions, please consult OMRON.

To Order: Select the part number and add the desired coil voltage rating (e.g., G7L-1A-T-CB-

AC100/120

G7L G7L

G7L-1A-T, G7L-1A-B G7L-2A-T, G7L-2A-B G7L-1A-P, G7L-2A-P

Resistive load Inductiv e load Resistive load Inductiv e load Resistive load Inductiv e load

Load (cosϕ = 1) (cosϕ = 0.4) (cosϕ = 1) (cosϕ = 0.4) (cosϕ = 1) (cosϕ = 0.4)

Rated load 30 A, 220 VAC 25 A, 220 VAC 20 A, 220 VAC

Contact material AgCdO

Carry current 30 A 25 A 20 A

Max. operating voltage 250 VAC

Max. operating current 30 A 25 A 20 A

Max. s witching capacity 6,600 VA 5,500 VA 4,400 VA

Min. permissib le load 100 mA, 5 VDC

Model

Contact form

Description SPST-NO DPST-NO Part number

E-brackets G7L-1A-B G7L-1A-BJ G7L-2A-B G7L-2A-BJ R99-07G5D

Track mounting adaptor P7LF-D

Model

Contact form

Description SPST-NO DPST-NO Part number

E-brackets G7L-1A-T G7L-1A-TJ G7L-2A-T G7L-2A-TJ R99-07G5D

Track mounting adaptor P7LF-D

Front connecting socket P7LF-06 (see note)

Cover P7LF-C

■CONTACT DATA

■ACCESSORIES

Quick-connect terminals

Screw terminals

Note: P level: λ60 = 0.1 x 10-6 operation.

Note: P7LF-C cover is supplied with the P7LF-06 socket.

Specifications

■COIL INTERNAL CIRCUIT

DC operating coil AC operating coil

■MODEL NUMBER LEGEND

G7L- ■ ■■ ■- ■ ■ ■ ■■ ■ ■ ■

12 3456

1. Contact form

1A: SPST-NO

2A: DPST-NO

2. Terminal shape

T: Quick-connect terminals

P: PCB terminals

B: Screw ter minals

3. Mounting construction

No symbol: E bracket type

UB: Upper bracket type

4. Special functions

No symbol: Without test button

J: With test button

5. 80: VDE approved version

(includes UL, CSA and TÜV)

6. CB: Class B insulation

7. Rated coil voltage

G7L G7L

Rated voltage Rated current Resistance Must operate Must release Max. voltage Power

(V) (mA) (Ω)% of rated voltage consumption

6 283 18.90 75% max. 15% min. 110% max. Approx.1.70

12 142 75 to 2.50 VA

24 71 303

50 34 1,310

100/120 17.00/20.40 5,260 75 volts 18 volts 132 volts

200/240 8.50/10.20 21,000 150 volts 36 volts 264 volts

■COIL DATA

Contact resistance 50 mΩ max.

Operate time 30 ms max.

Release time 30 ms max.

Max. operating Mechanical 1,800 operations/hour

frequency Electrical 1,800 operations/hour (under rated load)

Insulation resistance 1,000 MΩ min. (at 500 VDC)

Dielectric strength 4,000 VAC, min./5,000 VAC typical, 50/60 Hz for 1 minute between coil and contacts

2,000 VAC, 50/60 Hz for 1 minute between contacts of same pole

2,000 VAC, 50/60 Hz for 1 minute between contacts of different poles (DPST-NO type)

Impulse withstand voltage Between coil and contact: 10,000 V (impulse w ave used: 1.20 x 50 µs)

Vibration Mechanical durability 10 to 55 Hz; 1.50 mm (0.06 in) double amplitude

Malfunction durability 10 to 55 Hz; 1.50 mm (0.06 in) double amplitude

Shock Mechanical durability 1,000 m/s 2 (approx. 100 G)

Malfunction durability 1,000 m/s2 (appro x.10 G)

Life expectancy Mechanical 5,000,000 operations min. (at 1,800 operations/hour)

Electrical 100,000 operations min. (at 1,800 operations/hour under rated load)

Ambient temperature -20° to 85°C (-4° to 185°F)

Humidity 35% to 85% RH

Weight Quick-connect terminal type: approx. 90 g (3.17 oz)

PCB terminal type: approx. 100 g (3.52 oz)

Screw terminal type: approx. 120 g (4.23 oz)

Note: Data shown are of initial value.

■CHARACTERISTICS

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with tolerances of +15%/-20% for

AC rated current and ±15% for DC coil resistance.

2. Performance characteristic data are measured at a coil temperature of 23°C (73°F).

Rated voltage Rated current Resistance Must operate Must release Max. voltage Power

(V) (mA) (Ω)% of rated voltage consumption

6 317 18.90 75% max. 15% min. 110% max. Approx.1.90 W

12 158 75

24 79 303

48 40 1,220

100 19 5,260

G7L G7L

Dimensions

Unit: mm (inch)

G7L-1A-T

(E Bracket Attached)* Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

■RELAYS

G7L-2A-T

(E Bracket Attached)* Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

* E bracket must be ordered separately.

■CHARACTERISTIC DATA

Maximum switching capacity Electrical service life

Switching current (A)

Switching voltage (V) Switching current (A)

Service life (x 103 operations)

G7L G7L

G7L-1A-TJ

(E Bracket Attached)* Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

G7L-2A-TJ

(E Bracket Attached)* Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

* E bracket must be ordered separately.

G7L-1A-TUB Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

G7L-2A-TUB Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

G7L G7L

Unit: mm (inch)

G7L-1A-TUBJ Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

■RELAYS (continued)

G7L-2A-TUBJ Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

G7L-1A-B

(E bracket Attached)* Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

G7L-2A-B

(E bracket Attached)* Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

* E bracket must be ordered separately.

G7L G7L

G7L-1A-BJ

(E bracket Attached)* Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

G7L-2A-BJ

(E bracket Attached)* Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

G7L-1A-BUB Terminal arrang ement/ Mounting holes

Internal connections (Bottom view)

(Top view)

G7L-2A-BUB Terminal arrang ement/ Mounting holes

Internal connections (Bottom view)

(Top view)

* E bracket must be ordered separately.

G7L G7L

Unit: mm (inch)

G7L-1A-BUBJ Terminal arrang ement/ Mounting holes

Internal connections (Bottom view)

(Top view)

■RELAYS (continued)

G7L-2A-BUBJ Terminal arrang ement/ Mounting holes

Internal connections (Bottom view)

(Top view)

G7L-1A-P Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

G7L-2A-P Terminal arrangement/ Mounting holes

Internal connections (Bottom view)

(Top view)

G7L G7L

E bracket

R99-07G5D Mounting holes

(Bottom view)

■ACCESSORIES

Adaptor

P7LF-D Mounting holes

(Bottom view)

Note: 1. To protect against electric shock, use the P7LF-C cover on terminals.

2. P7LF-C cover is supplied with P7LF-06 socket

Front connecting socket

P7LF-06 Mounting holes

(Bottom view)

G7L G7L

Mounting track

PFP-100N, PFP-50N PFP-100N2

Unit: mm (inch)

Note: 1. It is recommended that a panel thickness of 1.60 to 2.00 mm (0.06 to 0.08 in) be used.

2. L = Length

PFP-100N ................. L = 1 m (39.00 in)

PFP-50N ................. L = 50 cm (19.60 in)

PFP-100N2 ............... L = 1 m (39.00 in)

End plate

PFP-M

Cover

P7LF-C

■ACCESSORIES (continued)

Note: P7LF-C cover is supplied with P7LF-06 socket

Spacer

PFP-S

G7L G7L

■APPROVALS

UL recognized type (File No. E41643)/ CSA cer tified type (File No. LR35535)

Type Contact form Terminal type Contact ratings

G7L-1A-T-CB SPST-NO Quick-connect 30 A, 277 VAC (Resistive) 30,000 c

G7L-1A-TJ-CB 30 A, 120 VAC (General purpose) 30,000 c

G7L-1A-TUB-CB 30 A, 277 VAC (General purpose) 30,000 c

G7L-1A-TUBJ-CB 1.5 kW, 120 VAC (Tungsten)

G7L-1A-B-CB Screw 1.5 HP, 120 VAC

G7L-1A-BJ-CB 3 HP, 240/265/277 VAC

G7L-1A-BUB-CB 20 FLA/120 LRA, 120 VAC, 30,000 c

G7L-1A-BUBJ-CB 17 FLA/102 LRA, 277 VAC, 30,000 c

G7L-1A-P-CB PCB TV-10, 120 VAC

20 A (2.4 kW), 120 VAC (Tungsten)

G7L-2A-T-CB DPST-NO Quick-connect 30 A, 277 VAC (Resistive) 30,000 c

G7L-2A-TJ-CB 30 A, 120 VAC (General purpose) 30,000 c

G7L-2A-TUB-CB 30 A, 277 VAC (General purpose) 30,000 c

G7L-2A-TUBJ-CB 1.5 kW, 120 VAC (Tungsten)

G7L-2A-B-CB Screw 1.5 HP, 120 VAC

G7L-2A-BJ-CB 3 HP, 240/265/277 VAC

G7L-2A-BUB-CB 20 FLA/120 LRA, 120 VAC, 30,000 c

G7L-2A-BUBJ-CB 17 FLA/102 LRA, 277 VAC, 30,000 c

G7L-2A-P-CB PCB TV-10, 120 VAC

20 A (2.4 kW), 120 VAC (Tungsten)

TÜV (File No. R9251551)

Type Contact form Coil ratings Terminal type Contact ratings

G7L-1A-T-CB SPST-NO 6, 12, 24, 48, Quick-connect 25 A, 240 VAC, (cosϕ = 1)

G7L-1A-TJ-CB 100, 110, 200, 25 A, 240 VAC, (cosϕ = 0.4)

G7L-1A-TUB-CB 220 VDC

G7L-1A-TUBJ-CB

G7L-1A-B-CB 12, 24, 50, Screw 30 A, 240 VAC, (cosϕ = 1)

G7L-1A-BJ-CB 100/120, 200/240 25 A, 240 VAC, (cosϕ = 0.4)

G7L-1A-BUB-CB VAC 30 A, 240 VAC, (cosϕ = 0.4)

G7L-1A-BUBJ-CB

G7L-1A-P-CB PCB 20 A, 240 VAC, (cosϕ = 1)

20 A, 240 VAC, (cosϕ = 0.4)

G7L-2A-T-CB DPST-NO Quick-connect 25 A, 240 VAC, (cosϕ = 1)

G7L-2A-TJ-CB 25 A, 240 VAC, (cosϕ = 0.4)

G7L-2A-TUB-CB

G7L-2A-TUBJ-CB

G7L-2A-B-CB Screw 25 A, 240 VAC, (cosϕ = 1)

G7L-2A-BJ-CB 25 A, 240 VAC, (cosϕ = 0.4)

G7L-2A-BUB-CB

G7L-2A-BUBJ-CB

G7L-2A-P-CB PCB 20 A, 240 VAC, (cosϕ = 1)

20 A, 240 VAC, (cosϕ = 0.4)

VDE recognized type (Licence no. 1530 UG)

Note: 1. Please consult OMRON for details of VDE approvals.

2. The G7L relay conforms to the following standards: Electrical safety: DIN IEC 255 Teil 1-00/DIN VDE 0435 Teil 201/05. 83

DIN VDE 0435 Teil 201 A1/05. 90

DIN IEC 255 Teil 0-20/DIN VDE 0435 Teil 120/10. 81

DIN EN 60 950/VDE 0805/11. 93

EMC: prEN 50082-2, EN 55022

3. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance

characteristics individually defined in this catalog.

4. In the interest of product improvement, specifications are subject to change.

G7L G7L

Precautions

■HANDLING

•To preserve initial performance, do not drop or otherwise

subject the power relay to shock.

•The case is not designed to be removed during normal

handling and operation. Doing so may affect performance.

•Use the power relay in a dry environment free from

excessive dust, SO2, H2S, or organic gas.

•Do not allow a voltage greater than the maximum allowable

coil voltage to be applied continuously.

•Do not use the power relay outside of specified voltages and

currents.

•Do not allow the ambient operating temperature to exceed

the specified limit.

■INSTALLATION

•Although there are not specific limits on the installation site,

it should be as dry and dust-free as possible.

•PCB terminal-equipped relays weigh approximately 100 g.

Be sure that the PCB is strong enough to support them. We

recommend dual-side through-hole PCBs to reduce solder

cracking from heat stress.

•Quick-connect terminals can be connected to fast on

receptacle #250 and positive-lock connectors.

•Allow suitable slack on leads when wiring, and do not

subject the terminals to excessive force.

■CLEANING PCB TERMINALS

•PCB terminals have semi-sealed construction which

prevents flux from entering the relay base. It is

recommended that the user should apply a tape seal over

the vent hole prior to wave soldering or cleaning. The tape

should then be removed after processing.

■OPERATING COIL

•As a rule, either a battery or a DC power supply with a

maximum 5% ripple is used for the operating voltage for DC

relays. Before using a rectified AC supply, confirm that the

ripple is not greater than 5%. Ripple greater than this can

lead to variations in the operating and reset voltages.

As excessive ripple can generate beats, the insertion of a

smoothing capacitor is recommended as shown below.

•When driving a transistor, check the leakage current and

connect a bleeder resistor if necessary.

•Momentary voltage drops on coil input voltage should not

exceed one second duration after contact mating with no

shock or vibration.

■APPLICATIONS

•Compressors for package air conditioners and heater

switching controllers

•Switching controllers for power tools or motors

•Power controllers for water heaters

•Power controllers for dryers

Omron Europe B.V. EMA-ISD, tel:+31 23 5681390, fax:+31 23 5681397, http://www.eu.omron.com/ema

Cat. No. GC RLY6 9/97 Specifications subject to change without notice. Printed in the U.S.A.

•Lamp control, motor drivers, and power supply switching in

copy machines, facsimiles, and other OA equipment

•Lighting controllers

•Power controllers for packers or food processing equipment

•Magnetron control in microwaves