CPC1017N Single-Pole, Normally Open 4-Lead SOP OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) LED Current to operate Rating 60 100 16 1 Units VP mArms / mADC mA Features Description The CPC1017N is a miniature single pole, normally open (1-Form-A) solid state relay in a 4-lead SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input/output isolation. The super-efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division's patented OptoMOS architecture while the optically coupled output is controlled by a highly efficient GaAIAs infrared LED. * Designed for Use in Security Systems Complying with EN50130-4 * Only 1mA of LED Current Required to Operate * 1500Vrms Input/Output Isolation * Small 4-Lead SOP Package * TTL/CMOS Compatible Input * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Immune to Radiated EM Fields * SMD Pick & Place, Wave Solderable * Tape & Reel Version Available * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Applications Ordering Information * Security * Passive Infrared Detectors (PIR) * Data Signalling * Sensor Circuitry * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Aerospace * Industrial Controls IXYS Integrated Circuits Division's state of the art double-molded vertical construction packaging enables CPC1017N to be one of the world's smallest relays. It offers board space savings of at least 20% over the competitor's larger 4-lead SOP relay. Approvals Part # CPC1017N CPC1017NTR Description 4-Lead SOP (100/tube) 4-Lead SOP (2000/reel) Pin Configuration + Control - Control 1 4 3 2 Load Load Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb DS-CPC1017N-R08 toff e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION CPC1017N Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms C C Derate linearly 3.33 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate 3 Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output 1 2 3 2 Conditions Symbol Min Typ Max Units IF=2mA t=10ms IL=100mA VL=60VP IL ILPK RON ILEAK - - 100 350 16 1 mArms / mADC mAP VL=50V, f=1MHz ton toff COUT - 25 10 10 - ms ms pF IL=100mA IF=5mA VR=5V IF IF VF IR 0.3 0.9 - 0.4 1.2 - 1 1.4 10 mA mA V A - CI/O - 1 - pF IF=5mA, VL=10V A Load current derates linearly from 100mA @ 25C to 80mA @ 80C. Measurement taken within 1 second of on-time. For applications requiring high temperature operation (greater than 60C) a LED drive current of 3mA is recommended. www.ixysic.com R08 INTEGRATED CIRCUITS DIVISION CPC1017N PERFORMANCE DATA* 25 20 20 15 10 5 15 10 5 15 10 0 7.0 7.1 7.2 On-Resistance (:) Typical IF for Switch Operation (N=50, IL=100mA, TA=25C) Typical IF for Switch Dropout (N=50, IL=100mA, TA=25C) Typical Blocking Voltage Distribution (N=50, TA=25C) 1.2 1.3 1.4 1.5 0.26 1.6 25 Device Count (N) 15 10 0 0.40 0.45 0.50 0.55 15 10 5 0 1.17 0.40 0.45 0.50 0.55 LED Current (mA) IF=50mA 1.2 IF=10mA IF=5mA 1.0 0 20 40 60 80 Temperature (C) 100 120 84 86 88 90 92 Typical Turn-Off vs. LED Forward Current (IL=100mA) 0.7 0.5 0.4 0.3 0.2 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 0 50 Typical IF for Switch Operation vs. Temperature (IL=80mA) 2.0 1.5 1.0 -40 -20 0 20 40 60 Temperature (C) 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 0 -20 82 Blocking Voltage (VP) 0.5 0.8 10 80 Turn-Off (ms) LED Current (mA) 1.6 2.5 15 0.1 Typical LED Forward Voltage Drop vs. Temperature 3.0 20 0.6 0 1.8 7.4 7.3 25 0.60 Typical Turn-On vs. LED Forward Current (IL=100mA) 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 1.4 35 Turn-Off (ms) Turn-On (ms) 20 6.9 6.8 0.38 0 0.35 LED Current (mA) 25 0.36 5 0.30 30 0.34 30 0.60 Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) 0.32 10 0 0.35 0.30 15 5 0.30 0.28 20 5 -40 20 Turn-Off (ms) 1.1 20 35 25 5 Device Count (N) 25 Device Count (N) 30 Turn-On (ms) 1.0 Device Count (N) 35 0 0 LED Forward Voltage Drop (V) Typical On-Resistance Distribution (N=50, IL=100mA, TA=25C) Typical Turn-Off Time (N=50, IF=5mA, IL=100mA, TA=25C) Device Count (N) 25 Device Count (N) Device Count (N) Typical Turn-On Time (N=50, IF=5mA, IL=100mA, TA=25C) 80 100 Typical Turn-Off vs. Temperature (IL=50mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 IF=5mA IF=2mA -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R08 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1017N PERFORMANCE DATA* Typical On-Resistance vs. Temperature (IL=Max Rated @ Temperature) Typical Load Current vs. Load Voltage (IF=5mA, TA=25C) 150 14 Typical Load Current vs. Temperature 180 10 Steady State 8 Instantaneous IF=5mA 6 50 0 -50 4 -100 2 -40 -150 -1.5 -20 0 20 40 60 Temperature (C) 80 100 91 0.016 89 0.014 Leakage (PA) Blocking Voltage (VP) Typical Blocking Voltage vs. Temperature 87 85 83 81 160 100 Load Current (mA) IF=5mA -0.5 0 0.5 Load Voltage (V) 1.0 1.5 -40 -20 0 20 40 60 Temperature (C) 80 100 IF=5mA 80 IF=2mA 60 40 0.010 0.008 0.006 -20 0 20 40 60 Temperature (C) 80 -20 0 20 40 60 80 Temperature (C) 100 120 Energy Rating Curve 0.012 0 -40 100 -40 Typical Leakage vs. Temperature Measured Across Pins 3&4 (VL=60V) 0.002 77 120 0 -1.0 0.004 79 140 20 Load Current (A) 12 Load Current (mA) On-Resistance (:) IF=2mA 100 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R08 INTEGRATED CIRCUITS DIVISION CPC1017N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1017N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1017N 260C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R08 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1017N MECHANICAL DIMENSIONS CPC1017N 4.089 0.203 (0.161 0.008) Recommended PCB Land Pattern 0.200 0.025 (0.008 0.001) 0.60 (0.0217) 6.096 0.102 (0.240 0.004) 3.810 0.076 (0.150 0.003) 0.432 0.127 (0.017 0.005) 5.60 (0.2205) 1.02 0.025 (0.040 0.001) Pin 1 2.54 Typ (0.100 Typ) 1.30 (0.0512) 2.184 Max (0.086 Max) 2.54 (0.10) Lead to package standoff: 0.0637 0.0383 (0.0025 0.0015) CPC1017N 0.762 0.102 (0.030 0.004) device weight = 0.076 grams Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) CPC1017NTR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 (0.472) B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossed Carrier Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1017N-R08 (c)Copyright 2013, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 5/6/2013