https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page1/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
6.2 mm PLC basic terminal block for output functions with screw connection, without relay or solid-state relay, for
mounting on DIN rail NS 35/7,5, with load return line connection (BB), 1 N/O contact, input voltage 24 V AC/DC
Your advantages
PLC actuator series with solid-state power relays for coupling the controller and actuators, such as motors, contactors, valves, etc.
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356409803
Weight per Piece (excluding packing) 32.000 g
Custom tariff number 85366990
Country of origin Germany
Technical data
Dimensions
Width 6.2 mm
Height 80 mm
Depth 94 mm
Ambient conditions
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Input data
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page2/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Technical data
Input data
Rated control circuit supply voltage US24 V AC/DC
Voltage range with reference to US0.8 ... 1.2
Rated control circuit supply voltage US24 V AC/DC
Voltage range with reference to US0.8 ... 1.2
Nominal input voltage UN24 V AC/DC
Protective circuit Bridge rectifier
Output data
Compatible components
Miniature relay, REL-MR-24DC/21, REL-MR-24DC/21AU;
miniature optocoupler, OPT-24DC/24DC/2, OPT-24DC/48DC/100,
OPT-24DC/230AC/1
Fitting of components REL-MR-24DC/21
Contact type Single contact, 1 N/O contact
Contact material AgSnO
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 100 mA)
Limiting continuous current 6 A
Maximum inrush current on request
Min. switching current 10 mA (at 12 V)
Interrupting rating (ohmic load) max. 140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity min. 120 mW
Fitting of components REL-MR-24DC/21AU
Contact type Single contact, 1 N/O contact
Contact material AgSnO, hard gold-plated
Note
If the specified maximum values are exceeded, the gold plating is
destroyed. The maximum values of the power contact relay are then valid.
This can result in a shorter service life than with a pure power contact.
Maximum switching voltage 30 VAC
36 VDC
Minimum switching voltage 100 mV (at 10 mA)
Limiting continuous current 50 mA
Maximum inrush current 50 mA
Min. switching current 1 mA (at 24V)
Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC)
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page3/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Technical data
Output data
Switching capacity min. 100 µW
Fitting of components OPT-24DC/24DC/2
Maximum switching voltage 33 VDC
Minimum switching voltage 3 VDC
Limiting continuous current 3 A (see derating curve)
Output circuit 2-conductor, floating
Protective circuit Reverse polarity protection Parallel polarity protection diode
Surge protection
Voltage drop at max. limiting continuous current ≤ 150 mV
Fitting of components OPT-24DC/48DC/100
Maximum switching voltage 48 VDC
Minimum switching voltage 3 VDC
Limiting continuous current 100 mA
Output circuit 2-conductor, floating
Protective circuit Reverse polarity protection Parallel polarity protection diode
Surge protection
Voltage drop at max. limiting continuous current ≤ 1 V
Fitting of components OPT-24DC/230AC/1
Maximum switching voltage 253 VAC
Minimum switching voltage 24 VAC
Limiting continuous current 0.75 A (see derating curve)
Output circuit 2-conductor floating, zero voltage switch
Protective circuit RCV circuit
Voltage drop at max. limiting continuous current ≤ 1 V
Leakage current ≤ 1 mA
Max. load value 4.5 A2s (tp = 10 ms, at 25 °C)
General
Operating mode 100% operating factor
Color gray
Flammability rating according to UL 94 V0 (Housing)
Mounting position any
Assembly instructions In rows with zero spacing
Connection data
Connection name Input side
Connection method Screw connection
Stripping length 8 mm
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page4/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Technical data
Connection data
Screw thread M3
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG 26 ... 14
Connection data 2
Connection name Output side
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG 26 ... 14
Standards and Regulations
Connection in acc. with standard CUL
Conformance/approvals
Designation Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN60068-2-60
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page5/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Circuit diagram
A2
A1
13
BB
14
Circuit diagram
A2
A1
13
BB
14
13
BB
14
A2
A1
DC AC
Classifications
eCl@ss
eCl@ss 10.0.1 27371603
eCl@ss 11.0 27371603
eCl@ss 4.0 27371100
eCl@ss 4.1 27371100
eCl@ss 5.0 27371600
eCl@ss 5.1 27371000
eCl@ss 6.0 27371600
eCl@ss 7.0 27371603
eCl@ss 8.0 27371603
eCl@ss 9.0 27371603
ETIM
ETIM 2.0 EC001456
ETIM 3.0 EC001456
ETIM 4.0 EC001456
ETIM 5.0 EC001456
ETIM 6.0 EC001456
ETIM 7.0 EC001456
UNSPSC
UNSPSC 6.01 30211916
UNSPSC 7.0901 39121542
UNSPSC 11 39121542
UNSPSC 12.01 39121542
UNSPSC 13.2 39122326
UNSPSC 18.0 39122335
UNSPSC 19.0 39122335
UNSPSC 20.0 39122335
UNSPSC 21.0 39122335
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page6/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Approvals
Approvals
Approvals
PRS / UL Recognized / cUL Recognized / EAC / DNV GL / cULus Recognized
Ex Approvals
Approval details
PRS http://www.prs.pl/ TE/2109/880590/16
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
EAC RU D-DE.B*00573/18
DNV GL https://approvalfinder.dnvgl.com/ TAE0000196-03
cULus Recognized
Accessories
Accessories
Bridge
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page7/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Accessories
Continuous plug-in bridge-FBST 500-PLC RD-2966786
Continuous plug-in bridge, length: 500 mm, color: red
Continuous plug-in bridge-FBST 500-PLC BU-2966692
Continuous plug-in bridge, length: 500 mm, color: blue
Continuous plug-in bridge-FBST 500-PLC GY-2966838
Continuous plug-in bridge, length: 500 mm, color: gray
Single plug-in bridge-FBST 6-PLC RD-2966236
Single plug-in bridge, length: 6 mm, number of positions: 2, color: red
Single plug-in bridge-FBST 6-PLC BU-2966812
Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page8/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Accessories
Single plug-in bridge-FBST 6-PLC GY-2966825
Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray
Single plug-in bridge-FBST 8-PLC GY-2967688
Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray
DIN rail
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white
passivated, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page9/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Accessories
DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated,
length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page10/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Accessories
End cap-NS 35/ 7,5 CAP-1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page11/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Accessories
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum,
uncoated, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
End cap-NS 35/15 CAP-1206573
DIN rail end piece, for DIN rail NS 35/15
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page12/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Accessories
DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798
DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel,
galvanized, passivated with a thick layer, length:2000 mm, color:silver
Labeled terminal marker
Zack marker strip-ZB 6 CUS-0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip-ZB 6,LGS:FORTL.ZAHLEN-1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2
mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip-ZB 6,QR:FORTL.ZAHLEN-1051029
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm,
lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip-ZB 6,LGS:GLEICHE ZAHLEN-1051032
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15
x 10.5 mm, Number of individual labels: 10
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page13/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Accessories
Marker for terminal blocks-ZB 6,LGS:L1-N,PE-1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x
10.5 mm, Number of individual labels: 10
Marker for terminal blocks-ZB 6,LGS:U-N-1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W,
N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 6.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks-UC-TM 6 CUS-0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual
labels: 80
Marker for terminal blocks-UCT-TM 6 CUS-0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual
labels: 60
Partition plate
Separating plate-PLC-ATP BK-2966841
Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual
separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,
isolation
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page14/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Accessories
Power module
Power terminal block-PLC-ESK GY-2966508
Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5
Screwdriver tools
Screwdriver-SZF 1-0,6X3,5-1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-
component grip, with non-slip grip
Terminal marking
Zack marker strip-ZB 6:UNBEDRUCKT-1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels:
10
Marker for terminal blocks-UC-TM 6-0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80
https://www.phoenixcontact.com/us/products/2982799
12/15/2020Page15/15
Relay base-PLC-BSC- 24UC/ 1/ACT-2982799
Accessories
Marker for terminal blocks-UCT-TM 6-0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER,
BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size:
5.6 x 10.5 mm, Number of individual labels: 60
Necessary add-on products
Single relay-REL-MR- 24DC/21-2961105
Plug-in miniature power relay, with power contact, 1 PDT, input voltage 24 V DC
Single relay-REL-MR- 24DC/21AU-2961121
Plug-in miniature power relay, with multi-layer gold contact, 1 PDT, input voltage 24 V DC
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com