LPE-3325 Vishay Dale Surface Mount Transformers/Inductors Gapped and Ungapped, Custom Configurations Available ELECTRICAL SPECIFICATIONS Inductance Range: 10.1H to 3900uH, measured at 0.10V RMS @ 10kHz without DC current, using an HP 4263A or HP 4284A impedance analyzer. DC Resistance Range: 0.06 ohm to 18.0 ohm, measured at + 25C + 5C. Rated Current Range: 1.00 amps to .06 amps. Dielectric Withstanding Voltage: 500V RMS, 60Hz, 5 seconds. DIMENSIONS in inches [millimeters] STANDARD ELECTRICAL SPECIFICATIONS Pad Layout DCR | MAX. RATED*|/SATURATING** 0.05 [1.42] IND.| IND, SCHEMATIC] MAX. |DC CURRENT| CURRENT >| |* Pad dlniensions Typical, MODEL (wH)| TOL: | LETTER |(Ohms)| (Amps) (Amps) : eee Ungapped Models h 0,073 [1.85] LPE-3325-100NA 10 |}+30% A 0.06 1.01 N/A 0.042 A LPE-3325-150NA 15 |+30% A 0.08 0.91 N/A [1.07] a LPE-3325-220NA | 22 |+30% A 0.09 0.83 N/A S65) - als LPE-3325-330NA 33 |+30% A 0.11 0.75 N/A . places LPE-3325-470NA 47 |+30% A 0.14 0.69 N/A < tra) > LPE-3325-680NA 68 |+30% A 0.16 0.63 N/A Reference LPE-3325-101NA | 100 |+30% A 0.20 0.57 N/A Only (peso te 150 | +30% A 0.76 0.29 ie i A i LPE-3325-221 220 | +30% A 0.92 0.26 / Glens ner oul LPE-3525-331NA | 330 |+30%| A 113 0.24 N/A * aq Teme (22 LPE-3525-471NA | 470 |+30% A 1.35 0.22 N/A 0.256 [6.50] 7} Hy LPE-3325-681NA | 680 |+30% A 1.62 0.20 N/A Max. LPE-3525-102NA |1000/+ 30% A 1.97 0.18 N/A y (oq a LPE-3325-152NA |1500/+30%| A 2.41 0.16 N/A LPE-3325-222NA |2200]+30% A 3.00 0.15 N/A L Clip Opening LPE-3325-332NA |3300|]+30% A 5.96 0.10 N/A Opposite Pin 1 LPE-3325-392NA /3900]+30% A 7.00 0.10 N/A Gapped Models 4 LPE-3325-100MB 10 |+20% A 0.22 0.54 1.480 0.205 [5.21] LPE-3325-150MB | 15 |+20% A 0.27 0.48 1.240 Max. LPE-3325-220MB | 22 |+20% A 0.42 0.39 1.050 v LPE-3325-330MB | 33 |+20% A 0.65 0.31 0.872 | LPE-3325-470MB | 47 |+20% A 0.97 0.26 0.740 le O389 [8-20] > LPE-3325-680MB | 68 |+20% A 1.45 0.21 0.622 LPE-3325-101MB | 100 |+ 20% A 2.22 0.17 0.518 0.268 LPE-3325-151MB | 150 | + 20% A 3.55 0.13 0.426 [* teen | + LPE-3325-221MB | 220 |+20% A 4.31 0.12 0.354 ts _____ y__:0.028 LPE-3325-331MB | 330 |+ 20% A 6.72 0.10 0.290 0.073 [1.85] | jf 10.71) LPE-3325-471MB | 470 | + 20% A 9.83 0.08 0.244 yee Oo Q LPE-3325-681MB | 680 | + 20% A 14.8 0.07 0.204 t O 4 LPE-3325-102MB |1000|+20% A 18.0 0.06 0.169 | | *DC current that will create a maximum temperature rise of 30C when applied at + 25C ine ern ambient. **DC current that will typically reduce the initial inductance by 20%. Footprint Diagram UNGAPPED MODELS: Highest possible inductance with the lowest DCR and highest Q capability. Beneficial in filter, impedance matching and line coupling devices. NOTE: Pad layout guidelines per / GAPPED MODELS: Capable of handling large amounts of DC current, tighter inductance MIL-STD-275E (printed wiring for electronic tolerance with better temperature stability than ungapped models. Beneficial in DC to DC equipment). Tolerances: xx+0.01"[+0.25mm]. converters or other circuits carrying DC currents or requiring inductance stability over a xxx + 0.005" [+ 0.12mm]. temperature range. DESCRIPTION - LPE-3325-102NA a LPE 3325 1000uWH +30% A MODEL SIZE INDUCTANCE VALUE INDUCTANCE TOLERANCE CORE SAP PART NUMBERING GUIDELINES (INTERNAL) Hee Foe be} [eo] 2] Laced PRODUCT FAMILY SIZE PACKAGE INDUCTANCE TOL. CORE CODE VALUE See the end of this data book for conversion tables www.vishay.com For technical questions, contact Magnetics@vishay.com Document Number: 34063 100 Revision 28-Aug-02LPE-3325 Surface Mount Transformers/Inductors, Gapped and Ungapped Vishay Dale Custom Configurations Available ee VISHAY SCHEMATIC (TOP VIEW) sits Schematic A 406 3 5 6 | 2 6 oot NOTE: Schematic A for both Gapped and Ungapped LPE Series. ENVIRONMENTAL PERFORMANCE PARTMARKING TEST CONDITIONS Thermal Cycling sen: ; eee + 125C Vishay Dale aie Date code oO Marki fix of Soldering Heat Tested to + 230C _ Pint Sea ume eeee) Mechanical Shock Per MIL-STD-202, Method 213 (100G) nT ineleator Vibration Per MIL-STD-202, Method 204 (20G) Solderability Per industry standards *Must be checked in end use application PACKING lc ee TAPE SPECIFICATIONS: STANDARDS: All embossed carrier tape packaging will be Carrier Tape Type: Conductive. accomplished in compliance with latest revision of EIA-481 Cover Tape Type: Anti-static. Taping of Surface Mount Components for Automatic Placement. Cover Tape Adhesion to Carrier: 40 + 30 grams. TAPE COMPONENT UNITS PER REEL SPECIFICATIONS: MODEL | WIDTH PITCH 13 INCH REEL Diameter (flange): 13 [830.2mm]. Maximum Width (over flanges): 1.197" [30.4mm]. LPE-3325 24mm 12mm 1000 Tape and Reel Orientation Pin 1 Indicator Cover Tape Embossed Cavity USER DIRECTION OF FEED Label Area NOTE: Top view shown with cover tape removed. Document Number: 34063 For technical questions, contact Magnetics@vishay.com www.vishay.com Revision 28-Aug-02 101