6135 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Circuit Breaker TA35 2-pole C14 See below: Approvals and Compliances 70 C Description - Panel mount : Snap-in version from front side - 2 Functions : Appliance Inlet , Protection class I , Circuit breaker type TA35 , 2-pole - Quick connect terminal 6.3 x 0.8 mm Characteristics - Unwired - Switch non-illuminated or illuminated - Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Pre-wired version - Quick connect terminals 4.8 x 0.8 mm - Protection class II, 70C References Alternative: version for 16 A (20 A) Component: circuit breakers TA35 Rocker 2Pole Substitute for type 7764 We recommend for new applications the type DG11 Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Insulation cover Terminal Panel Thickness S Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 C to 60 C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Snap-in1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 appliance inlet/-outlet Circuit Breakers C14 acc. to IEC 60320-1 UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 C, 10 A, Protection Class I Acc. IEC/EN 60934, UL 1077, CSA 22.2 no. 235 2-pole rocker switch, illuminated or nonilluminated. Conditional short circuit Inc: 2000 A Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6135 Connectors 1 6135 Power entry modules without line filter https://www.schurter.com /PG05 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40023066 UL Approvals UL UL File Number: E96454 CQC Approvals CQC CCC Certificate Number: 2015180204000152 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimensions [mm] 10.6 31.8 +0.20 0 +0.20 0 59 65.3 27.4 3.2 58.8 x 27.2 30 6 max. R 0.2 R3 S 0.05 28.4 2 Connectors 6135 Power entry modules without line filter https://www.schurter.com /PG05 Diagrams L L' P1 2) PE PE' TA35 1) N N' P2 1) Line 2) Load Connectors 3 6135 4 Power entry modules without line filter https://www.schurter.com /PG05 Connectors 6135 Power entry modules without line filter https://www.schurter.com /PG05 Connectors 5 6135 Packaging unit Power entry modules without line filter https://www.schurter.com /PG05 40 Pcs Accessories Description Assorted Covers Rear Cover 0859.0074 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 Appliance Outlet further types to 6135 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 IEC Connector C15 for hot conditions 120C, Rewireable, Straight 4781 IEC Connector C15 for hot conditions 120C, Rewireable, Angled 4784 Connector further types to 6135 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS 11.09.2018 Power Cord further types to 6135 6 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.