CSM_XW2Z-___P-V_S-V_S-CV_T_DS_E_1_1
1
Host Link Cables (RS-232C Cables for Programmable Controller)
XW2Z-@@@P-V/S-V/S-CV/T
Ideal Cables for between Programmable Controllers and Host Computers
Ordering Information
SYSMAC PLC Units SYSMAC Host Link Cable (RS-232C Cable for Programmable Controllers) Host
Wiring patterns Cable length L * Model
C20-LK201-V1
C500-LK203
C500-LK201-V1
C120-LK201-V1
C200H-LK201
CV500-LK201
(Port 1, full-duplex mode)
2 m XW2Z-200P-V
Personal
computer:
IBM PC/AT or
compatible
5 m XW2Z-500P-V
C200HS-CPU31/33/21/23
CQM1-CPU21
CQM1-CPU41
CQM1-CPU42
CQM1-CPU43
CQM1-CPU44
CV500/1000/2000
CVM1
CV500-LK201
(Communications port 2)
C200HE-CPU42
C200HG-CPU43/63
C200HX-CPU44/64
C200HW-COM02
C200HW-COM04
C200HW-COM05
C200HW-COM06
CPM1-CIF01
2 m XW2Z-200S-V
5 m XW2Z-500S-V
CJ-series CPU Units
CS-series CPU Units
Serial Communications Unit
2 m XW2Z-200S-CV
5 m XW2Z-500S-CV
SYSMAC PLC Units Programmable Terminal (PT): NT20S Cable Host
Wiring patterns Cable length L * Model
CQM1-CPU21
CQM1-CPU41
CQM1-CPU42
CQM1-CPU43
CQM1-CPU44
(Units with RS-232C port)
C200HS-CPU31/33/21/23
CV500/1000/2000-CPU01
CVM1-CPU01/11
CV500-LK201
(Communications port 2)
C200HE-CPU42
C200HG-CPU43/63
C200HX-CPU44/64
C200HW-COM02
C200HW-COM04
C200HW-COM05
C200HW-COM06
CPM1-CIF01
2 m XW2Z-200T
Programmable
Terminal (PT):
NT20S
NT600S/NT620S/
NT620C
NT30/NT30C
5 m XW2Z-500T
SYSMAC PLC
•CQM1
•C Series
•CV Series
•CVM1
XW2Z Host Link Cable
Host
•Personal computer
•Factory Intelligent Terminal
•Programmable Terminal
Connector Hood FG
FG
SD 2
3
4
5
6
RD
RS
CS
DR
PLC
D-sub, 25-pin Plug
Connector Hood FG
---11
RD2
3
4
5
6
SD
ER
SG
DR
7SG 7 RS
8CS
20ER 9 ---
Host
D-sub, 9-pin Socket
Shield
···
···
Connector Hood FG
---
SD 2
3
4
5
6
RD
RS
CS
---
---
PLC
D-sub, 9-pin Plug
Connector Hood FG
---11
RD2
3
4
5
6
SD
ER
SG
DR
77RS
8--- 8 CS
9SG 9 ---
Host
D-sub, 9-pin Socket
Shield
Connector Hood FG
FG
SD 2
3
4
5
6
RD
RS
CS
---
PLC
D-sub, 9-pin Plug
Connector Hood FG
---11
RD2
3
4
5
6
SD
ER
SG
DR
7DR
8ER
7RS
8CS
9SG 9 ---
Host
D-sub, 9-pin Socket
Shield
Connector Hood FG
---
SD 2
3
4
5
9
RD
RS
CS
SG
PLC
D-sub, 9-pin Plug
Connector Hood FG
---11
SD2
3
4
5
9
RD
RS
CS
SG
Host
D-sub, 9-pin Plug
Shield
L
*Cable length L
XW2Z
2
Ratings and Specifications
*1. Contact resistance of the Connector.
*2. Dielectric strength of the Connector.
Materials and Finish
Item Type XW2Z-@P/S/T
Rated current 1 A
Rated voltage 125 VAC
Contact resistance 15 mΩ max. (at 20 mV, 100 mA max.) *1
Insulation resistance 100 MΩ min. (at 500 VDC)
Dielectric strength 500 VAC for 1 min (leakage current: 1 mA max.) *2
Degree of protection IP00
Electrical protection class Class 0
Ambient operating
temperature −25 to 80°C
Item Part name Materials and finish
Connectors
XM2A-0901
XM2A-2501
Housing Polyamide resin (UL94V-0)/milky white
Contacts Mating ends Brass/nickel base, 0.2-µm gold plating
Terminals
Shell Steel/nickel plated
XM2S-0911/2511 Housing ABS resin/nickel plated
Cable UL2464 Interface Cable AWG28 or the equivalent
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
•
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
•
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
•
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2008.1
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2008 All Right Reserved.
