1
Disconnectable Crimp style connectors (Board)
2.5mm
pitch
Crimp
XM CONNECTOR
High box type
HJST
Fa
1234 56
This is XM connector high box type, with
20.0mm mounting height and with 8.9mm
thickness. This connector exhibits the
stable electric connection to the condition
such as the vibration, the prying, the
micro-current and micro-voltage circuit.
Features ––––––––––––––––––––––––
• Interchangeability
The housing is interchangeable with these of the XM receptacle
housing.
• Inner-housing lock
This inner-housing lock secures the plug to the receptacle and
prevents accidental disconnection. The lock is protected and
is not affected by external forces that might result from the
routing of wires.
• Secondary retainers
The secondary retainers enhance safety in case of partial
insertion or accidental release of the contact. Even if a contact
is inserted incompletely, the retainer guides the contact to the
proper position and securely locks it in place.
• Header for 2.5mm pitch XM connector
for use specifically with resin coated
("potted") PC boards
This header is tall and fully shrouded so as to prevent the resin
used to coat the PC board from coming into contact with the
mating pins.
Specifications –––––––––––––––––––
• Current rating: 3 A AC, DC (AWG #22, #20)
• Voltage rating: 250 V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 10 mΩmax.
After environmental tests/ 20 mΩmax.
• Insulation resistance: 500 MΩmin.
• Withstanding voltage: 1,000 VAC/minute
• Applicable wire: AWG #28 to #20
• Applicable PC board thickness: 1.6 mm
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
* Compliant with RoHS.
2
1.9
2.3
6.5
3.1 2.9
1.3 0.8
Material and Finish
Model No. Applicable wire Q'ty/
reel
mm2AWG #
Insulation O.D. (mm)
1.5 to 1.9
0.8 to 1.9
24 to 20
28 to 22
0.22 to 0.50
0.08 to 0.33
SXA- 01T-P0.6
SXA-001T-P0.6
Phosphor bronze, tin-plated (reflow treatment)
8,000
8,000
Contact––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
B
A
11.5
12
6.3
7.7
2.5
A
2.5
2.5 7.8
0.95
Circuits Model No. Dimensions (mm)
AB
Material
PA 66, UL94V-0
Q’ty/
bag
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
22.5
2
3
4
5
6
7
8
9
10
XMP-02V
XMP-03V
XMP-04V
XMP-05V
XMP-06V
XMP-07V
XMP-08V
XMP-09V
XMP-10V
8.8
9.8
12.3
14.8
17.3
19.8
22.3
24.8
27.3
1,000
1,000
1,000
500
500
500
500
500
500
Circuits Model No. Q’ty/bag
2
3
4
5
6
7
8
9
10
XMS-02V
XMS-03V
XMS-04V
XMS-05V
XMS-06V
XMS-07V
XMS-08V
XMS-09V
XMS-10V
A
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
22.5
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Material
Glass-filled PA 66, UL94V-0
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Retainer –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
XM CONNECTOR High box type
RoHS compliance
RoHS compliance
RoHS compliance
3
8.9
1.5
18.8
(3.5)
B
2.5
A
Circuits Model No. Dimensions (mm)
AB
Material and Finish
Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment)
Wafer: Glass-filled PA 66, UL94V-0
Q'ty/
bag
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
22.5
2
3
4
5
6
7
8
9
10
BH02B-XMSK
BH03B-XMSK
BH04B-XMSK
BH05B-XMSK
BH06B-XMSK
BH07B-XMSK
BH08B-XMSK
BH09B-XMSK
BH10B-XMSK
8.9
9.9
12.4
14.9
17.4
19.9
22.4
24.9
27.4
770
700
525
455
385
315
280
245
245
Shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––––––––––
8.9
(20)
3.15±0.05
1.55±0.05
φ
1.7±0.05
+ 0.1
0
φ
0.9
2.5 ±0.05
A±0.1
PC board layout (viewed from soldering side) and Assembly layout –––––––––––––––––––
XM CONNECTOR High box type
Note:
1. Tolerances are non-cumulative: ±0.05 mm for all centers.
2. Hole dimensions differ according to the type of PC board and piercing method.
The dimensions above should serve as a guideline. Contact JST for details.
RoHS compliance This product displays (LF)(SN) on a label.
Note: *Strip-crimp applicator
SXA-001T-P0.6 AP-K2N MKS-L MK/SXA/M-001-06 APLMK SXA/M001-06
*MKS-SC SC/SXA/M-001-06 APLSC SXA/M001-06
SXA-01T-P0.6 AP-K2N MKS-L MK/SXA/M-01-06 APLMK SXA/M01-06
*MKS-SC SC/SXA/M-01-06 APLSC SXA/M01-06
Contact Crimping machine Crimp applicator Dies Crimp applicator with dies
Crimping machine, Applicator–––––––––––––––––––––––––––––––––––––––––––––––