Product data sheet
Miniature connectors
Product description M16 IP67 female cable connector, Contacts: 7, 6.0 - 8.0 mm, shieldable, solder, IP67, UL
Area M16 IP67 series 423
Order number 99 5626 09 07
Illustration Scale drawing Contact arrangement (Plug-in side)
You can find the component part drawing on the next page.
Technical data
General features
Order number 99 5626 09 07
Connector design female cable connector
Version connector female
straight
Connector locking system screw
Termination solder
Degree of protection IP67
Cross-sectional area max. 0.75 mm² / max.
AWG 18
Cable outlet 6.0 - 8.0 mm
Temperature range from/to -30 °C / 95 °C
Mechanical operation > 500 Mating cycles
Weight (g) 49.344
Customs tariff number 85369010
Electrical parameters
Rated voltage 125 V
Rated impulse voltage 800 V
Rated current (40 °C) 5 A
Insulation resistance ≥ 10¹⁰ Ω
Pollution degree 1
Overvoltage category I
Insulating material group III
EMC compliance shieldable
Shield connection cable clamp
Material
Contact body material PBT (UL94 V-0)
Contact material CuSn (bronze)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
Authorization/approvals
Approval 1 UL
Classifications
eCl@ss 11.1 27-44-01-02
ETIM 7.0 EC002635
Declarations of conformity
Low Voltage Directive 2014/35/EU (EN
60204-1:2018;EN
60529:1991)
Date: 2020-10-19 - Page 1 of 3
Product data sheet
Miniature connectors
Product description M16 IP67 female cable connector, Contacts: 7, 6.0 - 8.0 mm, shieldable, solder, IP67, UL
Area M16 IP67 series 423
Order number 99 5626 09 07
Component part drawing
Date: 2020-10-19 - Page 2 of 3
Product data sheet
Miniature connectors
Product description M16 IP67 female cable connector, Contacts: 7, 6.0 - 8.0 mm, shieldable, solder, IP67, UL
Area M16 IP67 series 423
Order number 99 5626 09 07
Security notices
The connector must not be plugged or unplugged under load. Non-observance and improper use can
result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical
equipment construction. The user is responsible for checking whether the connectors can also be used
in other areas of application.
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and
used by, or under the supervision of, persons with electrical engineering training, taking into account
the applicable regulations and standards.
Plug connectors with enclosure protection IP 67 and IP 68 are not suitable for use under water. When
used outdoors, the plug connectors must be protected separately against corrosion. For further
information on the IP protection classes, please refer to the "Technical Information" download centre.
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight"
(approx. 50 cNm).
Powered by TCPDF (www.tcpdf.org)
Date: 2020-10-19 - Page 3 of 3
