Raychem Products, North America
Tyco Electronics Corporation
300Constitution Drive
Menlo Park, CA 94025 USA
Product Brand:
Title:
CABLE BREAKOUT BOOT, FOUR ENTRY
Specification Control Drawing
Size
A
Cage Code
06090
Document No.
FXXX-XXXFR
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES.
METRIC DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this drawing at
any time. Users should evaluate the suitability of the
product for their application.
Rev.:
B
Rev. Date:
25-Mar-03
Drawn By:
A.Ng
Org. Date
:
03/17/03
Original file:
File :
R030156.doc
Scale:
None
Sheet:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
CABLE BREAKOUT BOOT, FOUR ENTRY
Table of Dimensions, inch (mm):
PART
NUMBER
(See Note*)
Body ID
Min. Exp. Max. Rec’d
(A) (B)
Leg ID
Min. Exp. Max. Rec’d
(C) (D)
Length Recovered
Min.
(E), Body (F), Leg
Rec’d.
Wall
Ref.
(W)
F3-9FR 0.90 (23) 0.43 (11) 0.28 (7) 0.11 (3) 2.0 (51) 0.8 (20) 0.05 (1.2)
F-23FR 1.25 (32) 0.80 (20) 0.50 (13) 0.19 (5) 2.3 (58) 1.0 (25) 0.09 (2.3)
F42-60FR 1.75 (44) 0.98 (25) 0.79 (20) 0.26 (7) 2.3 (58) 1.2 (30) 0.14 (3.6)
F75-100FR 2.35 (60) 1.00 (25) 1.00 (25) 0.35 (9) 2.8 (71) 1.7 (43) 0.14 (3.6)
F133-200FR 2.65 (67) 1.40 (36) 1.20 (30) 0.53 (13) 3.5 (89) 1.5 (38) 0.14 (3.6)
F150-400FR 5.25 (133) 3.00 (76) 1.35 (34) 0.55 (14) 5.0 (127) 3.0 (76) 0.13 (3.3)
Note*: Add “NA” to the end of Part Number if no adhesive is required.
Material: Heat shrinkable boot material in accordance with –3 polyolefin
Factory applied sealant: Factory applied hot melt adhesive is standard.
