38mm (1.5INCH) SINGLE DIGIT NUMERIC DISPLAY P/N: SC15-11SRWA SUPER BRIGHT RED Features Description zLOW CURRENT OPERATION. The Super Bright Red source color devices are made zHIGH LIGHT OUTPUT. Diode. z1.5 INCH DIGIT HEIGHT. zEXCELLENT CHARACTER APPEARANCE. with Gallium Aluminum Arsenide Red Light Emitting zEASY MOUNTING ON P.C. BOARDS OR SOCKETS. zI.C. COMPATIBLE. zMULTICOLOR AVAILABLE. zMECHANICALLY RUGGED. zSTANDARD : GRAY FACE, WHITE SEGMENT. zRoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAA5921 REV NO: V.5 DATE:NOV/28/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN:F.LI ERP: 1301000805 Selection Guide Part No. Dice Iv (ucd) @ 10mA Lens Type SC15-11SRWA SUPER BRIGHT RED (GaAlAs) WHITE DIFFUSED Min. Typ. 12000 60000 Description Common Cathode,Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D Dominant Wavelength 1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF Forward Voltage Per Segment or (Dp) Super Bright Red 3.7 (1.85 ) 5.0 (2.5) V IF=20mA IR Reverse Current Per Segment or (Dp) Super Bright Red 10 (10) uA VR = 10V (VR = 5V) Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation Per Segment or (Dp) 150(100) mW DC Forward Current Per Segment or (Dp) 30(30) mA 155(155) mA 10(5) V Peak Forward Current [1] Per Segment or (Dp) Reverse Voltage Per Segment or (Dp) Operating / Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAA5921 REV NO: V.5 DATE:NOV/28/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN:F.LI ERP: 1301000805 Super Bright Red SC15-11SRWA SPEC NO: DSAA5921 REV NO: V.5 DATE:NOV/28/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN:F.LI ERP: 1301000805 PACKING & LABEL SPECIFICATIONS SC15-11SRWA Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA5921 REV NO: V.5 DATE:NOV/28/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN:F.LI ERP: 1301000805