ABPLLNV060PG2A3 - HONEYWELL

TCR2EF series, TCR2EE series

2014-03-01

1

TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic

TCR2EF series

TCR2EE series

200 mA CMOS Low Drop-Out Regulator with Fast Load Transient Response

The TCR2EF and TCR2EE series are CMOS single-output voltage

regulators with an on/off control input, featuring low dropout voltage,

low output noise voltage and fast load transient response.

These voltage regulators are available in fixed output voltages

between 1.0 V and 5.0 V and capable of driving up to 200 mA. They

feature overcurrent protection, an Auto-discharge function.

The TCR2EF and TCR2EE series has a low dropout voltage of

180 mV ( 2.5 V output, IOUT = 150 mA) with low output noise voltage

of 35 μVrms (2.5 V output) and a load transient response of only ⊿

VOUT = ±60 mV ( IOUT = 1 mA⇔150 mA, COUT =1.0 μF).

Thus, the TCR2EF and TCR2EE series are suitable for sensitive

power supply such as Analog and RF applications.

Features

• Low Drop-Out voltage

VIN-VOUT = 150 mV (typ.) at 3.0 V-output, IOUT = 150 mA

VIN-VOUT = 180 mV (typ.) at 2.5 V-output, IOUT = 150 mA

VIN-VOUT = 230 mV (typ.) at 1.8 V-output, IOUT = 150 mA

VIN-VOUT = 380 mV (typ.) at 1.2 V-output, IOUT = 150 mA

VIN-VOUT = 510 mV (typ.) at 1.0 V-output, IOUT = 150 mA

• Low output noise voltage ( VNO = 35 μVrms (typ.) at 2.5 V-output, IOUT = 10 mA, 10 Hz < f < 100 kHz )

• Fast load transient response (⊿VOUT = ±60 mV (typ.) at IOUT = 1 mA ⇔ 150 mA, COUT =1.0 μF )

• Low quiescent bias current ( IB = 35 μA (typ.) at IOUT = 0 mA )

• High ripple rejection ( R.R = 73 dB (typ.) at 2.5V-output, IOUT = 10 mA, f = 1 kHz )

• Wide range Output Voltage line up ( VOUT = 1.0 to 5.0 V )

• High VOUT accuracy ±1.0% ( 1.8V ≤ VOUT )

• Overcurrent protection

• Auto-discharge

• Pull down connection between CONTROL and GND

• Ceramic capacitors can be used ( CIN = 0.1 μF, COUT = 1.0 μF)

• Small package ESV (SOT-553) (1.6 mm x 1.6 mm x 0.55 mm)

General package SMV (SOT-25) (2.8 mm x 2.9 mm x 1.1 mm)

SMV

ESV

Weight :

SMV (SOT-25)(SC-74A) : 16 mg ( typ.)

ESV (SOT-553) : 3.0 mg ( typ.)

Start of commercial production

2012-10

TCR2EF series, TCR2EE series

2014-03-01

2

Absolute Maximum Ratings (Ta = 25°C)

Characteristics Symbol Rating Unit

Input voltage VIN 6.0 V

Control voltage VCT -0.3 to 6.0 V

Output voltage VOUT -0.3 to VIN + 0.3 V

Output current IOUT 200 mA

200 (Note 1)

SMV

580 (Note 2)

150 (Note 1)

Power dissipation PD

ESV

320 (Note 3)

mW

Operation temperature range Topr −40 to 85 °C

Junction temperature Tj 150 °C

Storage temperature range Tstg −55 to 150 °C

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly

even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute

maximum ratings and the operating ranges.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test

report and estimated failure rate, etc).

Note 1: Unit Rating

Note 2: Rating at mounting on a board

(FR4 board: 25.4 mm × 25.4 mm × 1.6 mm)

Note 3: Rating at mounting on a board

(FR4 board dimension: 30 mm × 30 mm × 0.8 mm)

Pin Assignment (top view)

SMV(SOT-25)(SC-74A) ESV(SOT-553)

VOUT

CONTROL GND

NC

VIN

13

2

4

5

VOUT

CONTROL

GND

NC

VIN

1 3

2

4

5

TCR2EF series, TCR2EE series

2014-03-01

3

List of Products Number, Output voltage and Marking

Product No. Product No.

SMV(SOT-25) ESV(SOT-553)

VOUT (V)

(typ.) Marking

SMV(SOT-25) ESV(SOT-553)

VOUT (V)

(typ.) Marking

TCR2EF10 TCR2EE10 1.0 1N0 TCR2EF28 TCR2EE28 2.8 2N8

TCR2EF105 TCR2EE105 1.05 1NA TCR2EF285 TCR2EE285 2.85 2ND

TCR2EF11 TCR2EE11 1.1 1N1 TCR2EF29 TCR2EE29 2.9 2N9

TCR2EF115 TCR2EE115 1.15 1NB - TCR2EE295 2.95 2NE

TCR2EF12 TCR2EE12 1.2 1N2 TCR2EF30 TCR2EE30 3.0 3N0

TCR2EF125 TCR2EE125 1.25 1NC - TCR2EE305 3.05 3NA

TCR2EF13 TCR2EE13 1.3 1N3 TCR2EF31 TCR2EE31 3.1 3N1

TCR2EF135 TCR2EE135 1.35 1ND TCR2EF32 TCR2EE32 3.2 3N2

TCR2EF14 TCR2EE14 1.4 1N4 TCR2EF33 TCR2EE33 3.3 3N3

- TCR2EE145 1.45 1NE - TCR2EE335 3.35 3ND

TCR2EF15 TCR2EE15 1.5 1N5 - TCR2EE34 3.4 3N4

- TCR2EE17 1.7 1N7 TCR2EF36 TCR2EE36 3.6 3N6

TCR2EF18 TCR2EE18 1.8 1N8 - TCR2EE39 3.9 3N9

- TCR2EE185 1.85 1NF TCR2EF40 TCR2EE40 4.0 4N0

TCR2EF19 TCR2EE19 1.9 1N9 TCR2EF41 TCR2EE41 4.1 4N1

TCR2EF20 TCR2EE20 2.0 2N0 - TCR2EE42 4.2 4N2

- TCR2EE24 2.4 2N4 TCR2EF45 TCR2EE45 4.5 4N5

TCR2EF25 TCR2EE25 2.5 2N5 - TCR2EE48 4.8 4N8

TCR2EF27 TCR2EE27 2.7 2N7 TCR2EF50 TCR2EE50 5.0 5N0

- TCR2EE275 2.75 2NF

Please ask your local retailer about the devices with other output voltages.

Marking (top view)

Example: TCR2EF33 (3.3 V output) Example: TCR2EE33 (3.3 V output)

3 N 3

TCR2EF series, TCR2EE series

2014-03-01

4

Electrical Characteristics

(Unless otherwise specified,

VIN = VOUT + 1 V, IOUT = 50 mA, CIN = 0.1 μF, COUT = 1.0 μF, Tj = 25°C)

Characteristics Symbol Test Condition Min Typ. Max Unit

VOUT < 1.8 V -18 ⎯ +18 mV

Output voltage accuracy VOUT IOUT = 50 mA (Note 4)

1.8 V ≤ VOUT -1.0 ⎯ +1.0 %

Input voltage VIN IOUT = 1 mA 1.5 ⎯ 5.5 V

Line regulation Reg･line VOUT + 0.5 V ≤ VIN ≤ 5.5 V, IOUT = 1 mA ⎯ 1 15 mV

Load regulation Reg･load 1 mA ≤ IOUT ≤ 150 mA ⎯ 15 30 mV

Quiescent current IB IOUT = 0 mA ⎯ 35 60 μA

Stand-by current IB (OFF) VCT = 0 V ⎯ 0.1 1.0 μA

Drop-out voltage VIN-VOUT IOUT = 150 mA (Note 5) ⎯ 180 230 mV

Temperature coefficient TCVO −40°C ≤ Topr ≤ 85°C ⎯ 100 ⎯ ppm/°C

Output noise voltage VNO VIN = VOUT + 1 V, IOUT = 10 mA,

10 Hz ≤ f ≤ 100 kHz, Ta = 25°C (Note 5) ⎯ 35 ⎯ μVrms

Ripple rejection ratio R.R.

VIN = VOUT + 1 V, IOUT = 10 mA,

f = 1 kHz, VRipple = 500 mVp-p,

Ta = 25°C (Note 5)

⎯ 73 ⎯ dB

Load transient response ⊿VOUT IOUT = 1 mA⇔150mA, COUT = 1.0 μF ⎯ ±60 ⎯ mV

Control voltage (ON) VCT (ON) ⎯ 1.0 ⎯ 5.5 V

Control voltage (OFF) VCT (OFF) ⎯ 0 ⎯ 0.4 V

Note 4: Stable state with fixed IOUT condition

Note 5: The 2.5 V output product

Note 6: All characterisitcs of over 4.5V output products are measured at VIN = VOUT + 0.5 V conditions.

Drop-out voltage (IOUT = 150 mA, CIN = 0.1 μF, COUT = 1.0 μF, Tj = 25°C)

Output voltages Symbol Min Typ. Max Unit

1.0 V, 1.05 V ⎯ 510 770

1.1 V, 1.15 V ⎯ 440 670

1.2 V, 1.25 V ⎯ 380 570

1.3 V ⎯ 350 470

1.4 V ⎯ 310 420

1.5 V ≤ VOUT < 1.8 V ⎯ 290 390

1.8 V ≤ VOUT < 2.5 V ⎯ 230 310

2.5 V ≤ VOUT < 3.0 V ⎯ 180 230

3.0 V ≤ VOUT ≤ 5.0 V

VIN − VOUT

⎯ 150 200

mV

TCR2EF series, TCR2EE series

2014-03-01

5

Application Note

1. Recommended Application Circuit

The figure above shows the recommended configuration for using a Low-Dropout regulator. Insert a capacitor at

VOUT and VIN pins for stable input/output operation. (Ceramic capacitors can be used).

2. Power Dissipation

Both unit and board-mounted power dissipation ratings for TCR2EF series and TCR2EE series are available in

the Absolute Maximum Ratings table.

Power dissipation is measured on the board shown below.

Testing Board of Thermal Resistance

CONTROL pin

connection Operation

HIGH ON

LOW OFF

OPEN OFF

SM

V

ES

V

Ambient temperature Ta (°C)

PD – Ta (ESV)

Power dissipation PD (mW)

−40

0

0 40 120 80

100

200

300

400

①

②

① Board dimension 30 mm x 30 mm,

x 0.8 mm Copper area 20 mm2,

mounted on FR4 Board

② Unit Rating

*Board material: FR4 board

Board dimension: 30 mm × 30 mm × 0.8 mm

Copper area: 20 mm2

*Board material: FR4 board

Board dimension: 25.4 mm × 25.4 mm × 1.6 mm

Copper area: 645 mm2

VOUT

GND

VIN

1.0 μF 0.1 μF

⎧

CONTROL

NC

●SMV ●ESV

VOUT

GND VIN

1.0 μF

0.1 μF

CONTROL

NC

Ambient temperature Ta (°C)

PD – Ta (SMV)

Power dissipation PD (mW)

−40 0

0

40 120

80

200

400

600

800

① Board dimension 25.4 mm x 25.4 mm, x

1.6 mm Copper area 645 mm2,

mounted on FR4 Board

② Unit Rating

②

①

TCR2EF series, TCR2EE series

2014-03-01

6

Attention in Use

● Output Capacitors

Ceramic capacitors can be used for these devices. However, because of the type of the capacitors, there might be

unexpected thermal features. Please consider application condition for selecting capacitors. And Toshiba

recommend the ESR of ceramic capacitor is under 10 Ω.

● Mounting

The long distance between IC and output capacitor might affect phase assurance by impedance in wire and inductor.

For stable power supply, output capacitor need to mount near IC as much as possible. Also VIN and GND pattern

need to be large and make the wire impedance small as possible.

● Permissible Loss

Please have enough design patterns for expected maximum permissible loss. And under consideration of

surrounding temperature, input voltage, and output current etc, we recommend proper dissipation ratings for

maximum permissible loss; in general maximum dissipation rating is 70 to 80 percent.

● Overcurrent Protection Circuit

Overcurrent protection circuit is designed in these products, but this does not assure for the suppression of uprising

device operation. If output pins and GND pins are shorted out, these products might be break down.

In use of these products, please read through and understand dissipation idea for absolute maximum ratings from

the above mention or our ‘Semiconductor Reliability Handbook’. Then use these products under absolute maximum

ratings in any condition. Furthermore, Toshiba recommend inserting failsafe system into the design.

TCR2EF series, TCR2EE series

2014-03-01

7

Representative Typical Characteristics

1) Output Voltage vs. Input Voltage

2) Output Voltage vs. Output Current

Output voltage VOUT (V)

Output current IOUT (mA)

Input voltage VIN (V)

Output voltage VOUT (V)

Input voltage VIN (V)

Output voltage VOUT (V)

Output current IOUT (mA)

Input voltage VIN (V) Input voltage VIN (V)

VIN = 2.2 V,

CIN = 0.1 μF, C OUT = 1 μF

VIN = 2.8 V,

CIN = 0.1 μF, C OUT = 1 μF

VOUT=1.2V VOUT=1.8V

VOUT=2.5V

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 1mA

IOUT = 150mA

IOUT = 50mA

CIN = 0.1 μF, C OUT = 1 μF

VOUT=3.0V

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 1mA

IOUT = 150mA

IOUT = 50mA

IOUT = 1mA

IOUT = 150mA

IOUT = 50mA

IOUT = 1mA

IOUT = 150mA

IOUT = 50mA

Output voltage VOUT (V) Output voltage VOUT (V)

Output voltage VOUT (V)

TCR2EF series, TCR2EE series

2014-03-01

8

3) Output Voltage vs. Ambient Temperature

Output voltage VOUT (V)

Output current IOUT (mA)

VIN = 3.5 V,

CIN = 0.1 μF, C OUT = 1 μF

VIN = 4.0 V,

CIN = 0.1 μF, C OUT = 1 μF

Output voltage VOUT (V)

Output current IOUT (mA)

VOUT=2.5V VOUT=3.0V

VOUT=1.2V VOUT=1.8V

VOUT=2.5V VOUT=3.0V

VIN = 2.2 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 50mA

VIN = 2.8 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 50mA

VIN = 3.5 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 50mA

VIN = 4.0 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 50mA

Output voltage VOUT (V)

Ambient temperature Ta (℃)

Output voltage VOUT (V)

Ambient temperature Ta (℃)

Output voltage VOUT (V)

Ambient temperature Ta (℃)Ambient temperature Ta (℃)

TCR2EF series, TCR2EE series

2014-03-01

9

4) Dropout Voltage vs. Output Current

5) Quiescent Current vs. Input Voltage

CIN = 0.1 μF, COUT = 1 μF CIN = 0.1 μF, COUT = 1 μF

VOUT=1.2V VOUT=1.8V

Dropout voltage VIN - VOUT (mV)

Output current IOUT (mA)

Quiescent current IB (μA)

VOUT=1.2V VOUT=1.8V

Input voltage VIN (V)

Quiescent current IB (μA)

Input voltage VIN (V)

VOUT=2.5V VOUT=3.0V

Dropout voltage VIN - VOUT (mV)

Output current IOUT (mA)

Dropout voltage VIN - VOUT (mV)

Output current IOUT (mA)

Dropout voltage VIN - VOUT (mV)

Output current IOUT (mA)

CIN = 0.1 μF, COUT = 1 μF

IOUT = 0mA

CIN = 0.1 μF, COUT = 1 μF

IOUT = 0mA

CIN = 0.1 μF, COUT = 1 μF CIN = 0.1 μF, COUT = 1 μF

TCR2EF series, TCR2EE series

2014-03-01

10

6) Quiescent Current vs. Ambient Temperature

VOUT=1.2V VOUT=1.8V

VOUT=2.5V VOUT=3.0V

VIN = 2.2 V

CIN = 0.1 μF, COUT = 1 μF

IOUT = 0mA

VIN = 2.8V

CIN = 0.1 μF, COUT = 1 μF

IOUT = 0mA

VIN = 3.5 V

CIN = 0.1 μF, COUT = 1 μF

IOUT = 0mA

VIN = 4.0V

CIN = 0.1 μF, COUT = 1 μF

IOUT = 0mA

Quiescent current IB (μA)

Quiescent current IB (μA) Quiescent current IB (μA)

Quiescent current IB (μA)

Ambient temperature Ta (℃)Ambient temperature Ta (℃)

Ambient temperature Ta (℃)

VOUT=2.5V VOUT=3.0V

CIN = 0.1 μF, COUT = 1 μF

IOUT = 0mA

CIN = 0.1 μF, COUT = 1 μF

IOUT = 0mA

Input voltage VIN (V) Input voltage VIN (V)

Quiescent current IB (μA)

TCR2EF series, TCR2EE series

2014-03-01

11

7) Output Voltage vs. Output Current

8) Ripple Rejection Ratio vs. Frequency

VIN = 2.2 V ,Vripple

=

500 mVp−p

CIN = none, COUT = 1μF

IOUT = 10 mA, Ta = 25°C

VIN

=

4.0 V ,Vripple = 500 mVp−p

CIN = none, COUT = 1μF

IOUT = 10 mA, Ta = 25°C

VOUT=1.2V VOUT=3.0V

VOUT=1.2V VOUT=1.8V

VOUT=2.5V VOUT=3.0V

Pulse width = 1 ms

VIN = 5.5V

Output voltage VOUT (V)

Output current IOUT (mA)

Output voltage VOUT (V)

Output current IOUT (mA)

Output voltage VOUT (V)

Output current IOUT (mA)

Output voltage VOUT (V)

Output current IOUT (mA)

Ripple rejection (dB)

Frequency f (Hz)

Ripple rejection (dB)

Frequency f (Hz)

VIN = 2.2V

VIN = 5.5V

VIN = 2.8V

VIN = 5.5V VIN = 5.5V

VIN = 3.5V VIN = 4.0V

Pulse width = 1 ms

TCR2EF series, TCR2EE series

2014-03-01

12

9) Control Transient Response

Control voltage

VCT (V)

Output voltage

VOUT

(

V

)

VIN = 2.2 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 1mA

VOUT=1.2V VOUT=1.8V

VOUT=2.5V VOUT=3.0V

0

1.0

2.0

0

1.0

2.0

0

1.0

2.0

0

1.0

2.0

0

1.0

2.0

0

1.0

2.0

VIN = 2.8 V,

CIN = 0.1 μF, C OUT = 1 μF

0

1.0

2.0

0

1.0

2.0

VIN = 3.5 V,

CIN = 0.1 μF, C OUT = 1 μF

VIN = 4.0 V,

CIN = 0.1 μF, C OUT = 1 μF

3.0 3.0

Time t (25 μs/div) Time t (25 μs/div)

IOUT = 50mA

IOUT = 150mA

IOUT = 1mA

IOUT = 50mA

IOUT = 150mA

IOUT = 1mA

IOUT = 50mA

IOUT = 150mA

IOUT = 1mA

IOUT = 50mA

IOUT = 150mA

Control voltage

VCT (V)

Output voltage

VOUT

(

V

)

Control voltage

VCT (V)

Output voltage

VOUT

(

V

)

Control voltage

VCT (V)

Output voltage

VOUT

(

V

)

TCR2EF series, TCR2EE series

2014-03-01

13

10) Control Transient Response

VIN = 2.2 V,

CIN = 0.1 μF, C OUT = 1 μF

VIN = 2.8 V,

CIN = 0.1 μF, C OUT = 1 μF

VIN = 3.5 V,

CIN = 0.1 μF, C OUT = 1 μF

0

200

400

1.2

1.3

1.1

0

200

400

2.5

2.6

2.4

0

200

400

1.8

1.9

1.7

0

200

400

3.0

3.1

2.9

VIN = 4.0 V,

CIN = 0.1 μF, C OUT = 1 μF

Output current

IOUT (mA)

Output voltage

⊿VOUT (V)

Time t (25 μs/div)

VOUT=1.2V

(IOUT = 1mA ⇔ 150mA)

VOUT=1.8V

(IOUT = 1mA ⇔ 150mA)

VOUT=2.5V

(IOUT = 1mA ⇔ 150mA)

VOUT=3.0V

(IOUT = 1mA ⇔ 150mA)

Time t (25 μs/div)

Output current

IOUT (mA)

Output voltage

⊿VOUT (V)

Output current

IOUT (mA)

Output voltage

⊿VOUT (V)

Output current

IOUT (mA)

Output voltage

⊿VOUT (V)

TCR2EF series, TCR2EE series

2014-03-01

14

Package Dimensions

SMV (SOT-25)(SC-74A) Unit: mm

Weight : 16 mg (typ.)

TCR2EF series, TCR2EE series

2014-03-01

15

Package Dimensions

ESV (SOT-553) Unit: mm

Weight: 3.0 mg (typ.)

TCR2EF series, TCR2EE series

2014-03-01

16

RESTRICTIONS ON PRODUCT USE

• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively "Product") without notice.

• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.

• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the

Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of

all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes

for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the

instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their

own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such

design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,

diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating

parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR

APPLICATIONS.

• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE

EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH

MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT

("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without

limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for

automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,

safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE

PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your

TOSHIBA sales representative.

• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

• Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the

U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited

except in compliance with all applicable export laws and regulations.

• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES

OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.