DESIGN NOTES (continued) OPERATING SPECIFICATIONS Marking consists of manufacturer's name, logo (EC2), part number, terminal identification and date code of manufacture. Supply Voltage: +++ +> reese 6.2 5% to Vee (Can be All marking is applied by silk screen process using white epoxy operated on +5V to Vee} paint in accordance with M|L-STD-130, to meet the permanency : of identification required by MIL-STD-202, Method 215. Supply current: +t ts tresses 55ma typical Logic 1 Input at 25 C: BLOCK DIAGRAM IS SHOWN BELOW Voltage see eee ees 98 min. UT OUT hy wr 9 Currant 80s eee ee OGG max, Met ete rx Voltage 8 eee ee ee ee | 6 18S max, x x [ l ] ] 1 | Currant + 2 see eee se eee Sua min, | OUTPUT aeeOE. l Logic 1 Output at 25C: + +++ -+++s -,96 min, BUFFER i \@ | OSCILLATOR | Logic 0 Output at 25C: +--+ +++ -1,65 max. | c > | Operating temperature range: ++ +-- -30to +85C LL _- = a de nee seer Ey Storage temperature: Peirpegat Rite: ns ie oh ag -55 ta +125C 3 1 Vec ENABLE Vee *Output frequency will increase or decrease less than 1% for a respective increase or decrease of 5% in supply voltage. MECHANICAL DETAIL IS SHOWN BELOW 809 | PART NUMBER TABLE voour | OUT I 400 @ECLSWGN- ts Output Output MAX, Part Number Frequency Part Number Frequency V IN Ve | ECLSWGM-2 ? Mhz ECLSWGM-13 13 Mhz ECLSWGM-2.5 | 2.5 Mhz ECLSWGM-14 14 Mhz E iy E 260 &-? 8725 peas CLSWGM-3 3 Mhz ECLSWGM-15 15 Mhz MAX, MADE IN SLO USA ECLSWGM-3.5 3.5 Mhz ECLSWGM-20 20 Mhz {+ { i ; | | | | abed40 ECLSWGM-4 4 Mhz ECLSWGM-25 25 Mhz 2S ie ECLSWGM-4.5 4.5 Mhz ECLSWGM-30 30 Mhz 012 TYP. at an --l|o18 soa ECLSWGM-5 5 Mhz ECLSWGM-35 35 Mhz . 4 : P. | | ECLSWGM-5.5 | 5.5 Mhz ECLSWGM-40 40 Mhz aT o a o4 ECLSWGM-6 6 Mhz ECLSWGM-45 45 Mhz ny 400 ECLSWGM-7 7 Mhz ECLSWGM-50 50 Mhz Bs 4 ECLSWGM-8 8 Mhz ECLSWGM-60 60 Mhz 4 | ECLSWGM-9 9 Mhz ECLSWGM-70 70 Mhz te le: ECLSWGM-10 10 Mhz ECLSWGM-80 80 Mhz ECLSWGM-11 11 Mhz ECLSWGM-30 90 Mhz TEST CONDITIONS ECLSWGM-12 | 12Mhz_ || ECLSWGM-100 | 100 Mhz 1. All measurements are made at 25C. 2. Vee supply voltage is maintained at -5.2V DC, 3. All units are tested using a standard open emitter ECL 10,000 gate at the input. The input and output utilizes a 100 ohm Special modules can be readily manufactured to improve accura- pulldown resistor to -2V; the output is also loaded with one cies and/or provide customer specified random frequencies for ECL 10,000 gate. specific applications. Catalog No. C/031280R