856654
1747.5 MHz SAW Filter
Data Sheet: Rev E 8/25/11
- 1 of 6 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Applications
General purpose wireless
Wireless infrastructure
3G, 4G, Multistandard
Repeaters
Product Features
Functional Block Diagram
Top view
Usable bandwidth 75 MHz
Single-ended operation
Ceramic Surface Mount Package (SMP)
Matching required for operation at 50Ω
Small Size: 3.00 x 3.00 x 1.22 mm
Hermetically sealed
RoHS compliant, Pb-free
General Description
Pin Configuration
856654 is a general purpose Uplink filter for band 3. This
filter was specifically designed in a 3x3mm hermetic
package for base station applications and is part of our wide
portfolio of RF filters in the same package.
Low insertion loss, coupled with high attenuation, makes
this filter a natural choice for our customers Uplink RF
filtering needs.
Pin # SE
Description
2
Input
5
Output
1,3,4,6
Case Ground
Ordering Information
Part No.
Description
856654
packaged part
856654-EVB
evaluation board
Standard T/R size = 5000 units/reel.
856654
1747.5 MHz SAW Filter
Data Sheet: Rev E 8/25/11
- 2 of 6 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Specifications
Electrical Specifications (1)
Specified Temperature Range: (2) -30 to +85 ºC
Parameter (3)
Conditions
Min
Typical (4)
Max
Units
Center Frequency
-
1747.5
-
MHz
Maximum Insertion Loss
1710 1785 MHz
-
2.2
2.8
dB
Amplitude Ripple
1710 1785 MHz
-
-
1.6
dB p-p
Absolute Attenuation (5)
180 220 MHz
1197 1452 MHz
1606 1676 MHz
2100 2157 MHz
2680 3005 MHz
3197 6000 MHz
38
50
5.5
20
15
6
46
54
7
26
22
9
-
-
-
-
-
-
dB
dB
dB
dB
dB
dB
Input/output Return Loss
1710 1785 MHz
10
13
-
dB
Source Impedance (single-ended) (6)
-
50
-
Load Impedance (single-ended) (6)
-
50
-
Notes:
1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Typical values are based on average measurements at room temperature
5. Relative to minimum insertion Loss
6. This is the optimum impedance in order to achieve the performance shown
Absolute Maximum Ratings
Parameter
Rating
Operating Temperature
-30 to +85 oC
Storage Temperature
-40 to +85 oC
Input Power(7)
+5 dBm
7. Device is measured for equivalent 10K hours @ +55 ºC [CW Signal]
Operation of this device outside the parameter ranges given above may cause permanent damage.
856654
1747.5 MHz SAW Filter
Data Sheet: Rev E 8/25/11
- 3 of 6 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Reference Design 1 50 SE Input, 50 SE Output
Schematic
50
Single-ended
Input
1,3,4,6
2 5
3.3pF 50
50 5.1nH
0.8pF
5.6pF
13nH
4.7pF
50
Single-ended
Output
Notes:
1. No impedance matching required
2. Actual matching values may vary due to PCB layout and parasitic
PC Board
Mounting Configuration
DC
JJJYM
L1 L2
C1
C2 C3
C4
1.70
3.20 SQ
.96
1.27
.81
.38
Notes:
Top, middle & bottom layers: 1/2 oz copper
Substrates: FR4 dielectric .063” / Taconic TLY-5A .0075”
Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick
Hole plating: Copper min .0008µm
Notes:
1. All dimensions are in millimeters.
2. This footprint represents a recommendation only.
Bill of Material
Reference Desg.
Value
Description
Manufacturer
Part Number
L1
5.1 nH
Coil Wire-wound, 0402, 5%
MuRata
LQW15AN5N1B00
L2
13 nH
Coil Wire-wound, 0402, 5%
MuRata
LQW15AN13NG00
C1
4.7 pF
Chip Ceramic, 0402, 5%
MuRata
GRM15551H2R4GZ01
C2
3.3 pF
Chip Ceramic, 0402 5%
MuRata
GRM15551H3R3GZ01
C3
5.6 pF
Chip Ceramic, 0402,5%
MuRata
GRM15551H5R6GZ01
C4
0.8 pF
Chip Ceramic, 0402,5%
MuRata
GRM15551HR80KZ01
SMA
N/A
SMA connector
Radiall USA Inc.
9602-1111-018
PCB
N/A
3-layer
multiple
960700
856654
1747.5 MHz SAW Filter
Data Sheet: Rev E 8/25/11
- 4 of 6 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Typical Performance (at room temperature)
856654
1747.5 MHz SAW Filter
Data Sheet: Rev E 8/25/11
- 5 of 6 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Mechanical Information
Package Information, Dimensions and Marking
0.69
1.22 NOM.
1.32 MAX.
0.75
0.60
1.50
0.75
3.00
3.00
DC
code
Marking
Date code
JJJYM
logo
ID dot
TriQuint
Package Style: SMP-12A
Dimensions: 3.00 x 3.00 x 1.22 mm
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni
plating
All dimensions shown are nominal in millimeters
All tolerances are ±0.15mm except overall length and width
±0.10mm
The date code consists of day of the current year (Julian,
3 digits), Y = last digit of the year, and M = manufacturing
site code
Tape and Reel Information
Standard T/R size = 5000 units/reel. All dimensions are in millimeters
3.25
Section A-A
1.75
Ø1.5
4.0 A
12.0
5.5
Ø1.5
4.0
2.0
3.25
1.4
0.21 A
Ø102 Ø20.2
Ø13.0 2.0 Direction of travel
Ø330
12.8
2.7 logo
ID dot
TriQuint
856654
1747.5 MHz SAW Filter
Data Sheet: Rev E 8/25/11
- 6 of 6 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Product Compliance Information
ESD Information
ESD Rating: 1A
Value: Passes 300 V min.
Test: Human Body Model (HBM)
Standard: JEDEC Standard JESD22-A114
ESD Rating: A
Value: Passes 150 V min.
Test: Machine Model (MM)
Standard: JEDEC Standard JESD22-A115
Solderability
Compatible with the latest version of J-STD-020, lead
free solder, 260°C
Refer to Soldering Profile for recommended guidelines.
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
This product also has the following attributes:
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
PFOS Free
SVHC Free
MSL Rating
Devices are Hermetic, therefore MSL is not applicable
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information about
TriQuint:
Web: www.triquint.com Tel: +1.407.886.8860
Email: info-sales@tqs.com Fax: +1.407.886.7061
For technical questions and application information:
Email: flapplication.engineering@tqs.com
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain
herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint
assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained
herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with
the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest
relevant information before placing orders for TriQuint products. The information contained herein or any use of such
information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property
rights, whether with regard to such information itself or anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Caution! ESD-Sensitive Device