MINIATURE SWITCHES
4Litho in U.S.A GG
Sensitive Snap-Action Pushbutton Switches —
Solder and P.C. Terminals (Momentary Action)
PS
SERIES
5 AMP. (S.P.)
1 AMP (D.P.)
0.4 VA
DIRECT PANEL MOUNT
ONE POLE
TWO POLE
Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type
PS 1 - Solder lug 1 - One 0 - No Cap 0 - No Cap B - Gold/Nickel/Brass
2 - Printed Circuit 2 - Two 1 - .200 Dia. 1 - Black G - Gold/Nickel/
Terminals 2 - .375 Dia. 2 - White Silver
3 - .450 Sq. 3 - Ted Q - Coin Silver
4 - .310 Dia.
5 - .780 Sq.
Single pole circuit rated 5 amps, double pole circuit rated 1 amp.
Ratings are 0.4 VA — 28 BAC or DC
Supplied with .90” square black bezel as Standard
EXAMPLES:
PS1-100Q = One-pole, S.L., 5 amp., No Cap,
Coin Silver Contacts
PS2-221B = Two-pole, PC, .4 VA, .375 Dia., Black Cap.,
Gold/Nickel/Brass Contacts
NEW .780” SQUARE
CAP AND BEZEL
W-NU-29A W-NU-30A
DECORATIVE FACE NUTS
(SEE NOTE UNDER MATERIALS)
SPECIFICATIONS
Contact Rating – Letter codes G and Q (1 Pole) 5
amp resistive @ 125 VAC (U.L. recognized, CSA
certified) or 5 amp resistive @ 28 VDC. (2 pole) 1
amp resistive @ 125 VAC (U.L. recognized, CSA
certified) or 1 amp resistive @ 28 VDC.
Letter codes B and G – (1 and 2 Poles) 0.4
Volt-amps (VA) maximum @ 28 V max. (AC or
DC).
Contact Resistance – 50 milliohms maximum.
Insulation Resistance – 1,000 megohms min-
imum.
Dielectric Strength – 1,000 volts RMS minimum
at sea level.
Electrical Life – 60,000 cycles minimum at full
load-resistive.
Maximum Allowable Installation Force on
Plunger – 10 pounds.
Multi-pole contacts do not make and break
simultaneously.
MATERIALS
Case — Diallyl Phthalate.
Bushing — Brass, nickel plated.
Housing — Stainless steel.
Plunger — Thermoplastic.
Common Contact — Refer to contact material
table above.
Center & End Contact — Refer to contact
material table above.
Hardware — (2) Hex nuts W-NU-11, brass nickel
plated. (1) Internal tooth lockwasher W-WA-16,
steel chromium plated. (1) Locking Ring W-RI-16,
C.R.S. nickel plated.
Decorative Face Nuts — Brass, bright chrome
plated. See Page 16 for complete dimensions.
Solder Lug Terminal
Printed Circuit Terminal
Description P/N Color
W-KN-16 Black
W-KN-16A White
W-KN-16B Red
W-KN-32 Black
W-KN-32A White
W-KN-32B Red
W-KN-17 Black
W-KN-17A White
W-KN-17B Red
W-KN-18 Black
W-KN-18A White
W-KN-18B Red
W-KN-52 Black
W-KN-52A White
W-KN-52B Red
Bezel Black
W-BZ-21
.90 Square
Bezel
.780 Square
Cap
Square Cap
.450
Large Cap
.375
Medium Cap
.310
Small Cap
.200
MINIATURE SWITCHES
Litho in U.S.A GG 5
SPECIFICATIONS
Contact Rating — Letter codes G and Q — 5 amp
resistive @ 125 VAC or 28 VDC.
Letter codes B and G — 0.4 volts-amps (VA)
maximum @ 28 VAC or DC.
Contact Resistance — 50 milliohms maximum.
Insulation Resistance — 1,000 megohms minimum.
Dielectric Strength — 1,000 volts RMS minimum at
sea level.
Electrical Life — 60,000 cycles minimum at full
load.
Maximum Allowable Installation Force on Plunger
— 10 pounds.
MATERIALS
Case — Diallyl Phthalate.
Bushing — Brass, nickel plated.
Housing — Stainless steel.
Plunger — Thermoplastic.
Common Contact — Refer to contact material
table above.
Center & End Contact — Refer to contact material
table above.
Description P/N Color
W-KN-16 Black
W-KN-16A White
W-KN-16B Red
W-KN-32 Black
W-KN-32A White
W-KN-32B Red
W-KN-17 Black
W-KN-17A White
W-KN-17B Red
W-KN-18 Black
W-KN-18A White
W-KN-18B Red
Square Cap
.450
Large Cap
.375
Medium Cap
.310
Small Cap
.200
Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type
0 - No Cap 0 - No Cap B - Gold/Nickel/Brass
1 - .200 Dia. 1 - Black G - Gold/Nickel/Silver
PS 5 - Rt. Angle P.C. Mount 1 - One 2 - .375 Dia. 2 - White Q - Coin Silver
6 - Rt. Angle P.C. Mount 3 - .450 Sq. 3 - Red
4 - .310 Dia.
Rating is 5 amps — 125 VAC or 28 VDC.
Ratings are 0.4 VA — 28 VAC or DC.
ORDERING EXAMPLES:
PS5-100G = (Rt. Angle P.C. mount 5 amp.) One-pole No Cap No Color Silver Contacts
PS5 - 1 0 0 G
PS6-121Q = (Rt. Angle P.C. mount 5 amp.) One-pole .375 Dia. Black Cap Coin Silver Contacts
PS6 - 1 2 1 Q
Gold/Nickel/
PS6
VIEW A-A
Sensitive Snap-Action Pushbutton Switches —
P.C. Terminals (Momentary Action)
RIGHT ANGLE MOUNT IN P.C. BOARDS (HORIZONTAL)
PS5
VIEW A-A
PS
SERIES
5 AMP. (S.P.)
0.4VA
MINIATURE SWITCHES
6Litho in U.S.A GG
SPECIFICATIONS
Contact Rating — Letter codes G and Q (1 Pole) 5
amp resistive @ 125 VAC (U.L. recognized, CSA
certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 amp
resistive @ 125 VAC (U.L. recognized, CSA certified) or
1 amp resistive @ 28 VDC.
Letter codes B and G — (1 and 2 Poles) 0.4 Volt-
amps (VA) maximum @ 28 V maximum (AC or DC).
Contact Resistance — 50 milliohms maximum.
Insulation Resistance — 1,000 megohms minimum.
Dielectric Strength — 1,000 volts RMS minimum at
sea level.
Electrical Life — 60,000 cycles minimum at full load-
resistive.
Maximum Allowable Installation Force on Plunger
— 10 pounds.
Multi-pole contacts do not make and break simul-
taneously.
MATERIALS
Case — Diallyl Phthalate.
Bushing — Brass, nickel plated.
Housing — Stainless steel.
Plunger — Thermoplastic.
Common Contact — Refer to contact material
table above.
Center & End Contact — Refer to contact material
table above.
Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type
9 - Horizontal Right Angle 0 - No Cap 0 - No Cap B - Gold/Nickel/Brass
10 - Vertical Right Angle 1 - One 1 - .200 Dia. 1 - Black G - Gold/Nickel/Silver
PS (.100 Terminal Spacing) 2 - .375 Dia. 2 - White Q - Coin Silver
11 - Vertical Right Angle 0.4 VA 2 - Two 3 - .450 Sq. 3 - Red
(.150 Terminal Spacing) 4 - .310 Dia.
Single pole circuit rated 5 amps, double pole circuit rated 1 amp.
Ratings are 0.4 VA — 28 VAC or DC.
ORDERING EXAMPLES:
PS9-100B = (PC mounted 0.4 VA) One-pole No Cap No Color Brass Contacts
PS9 - 1 0 0 B
PS10-221Q= (PC mounted 1 amp.) Two-pole .375 Dia. Black Cap Coin Silver Contacts
PS10 - 2 2 1 Q
Gold/Nickel/
Sensitive Snap-Action Pushbutton Switches —
P.C. Terminals (Momentary Action)
RIGHT ANGLE P.C. MOUNT SWITCHES
PS
SERIES
5 AMP. (S.P.)
1 AMP. (D.P.)
0.4VA
Right Angle P.C. Terminal
Description P/N Color
W-KN-16 Black
W-KN-16A White
W-KN-16B Red
W-KN-32 Black
W-KN-32A White
W-KN-32B Red
W-KN-17 Black
W-KN-17A White
W-KN-17B Red
W-KN-18 Black
W-KN-18A White
W-KN-18B Red
Square Cap
.450
Large Cap
.375
Medium Cap
.310
Small Cap
.200
EPOXY SEAL
STD. FOR
THESE SERIES
MINIATURE SWITCHES
Litho in U.S.A GG 7
PS 9
Sensitive Snap-Action Pushbutton Switches —
P.C. Terminals (Momentary Action)
RIGHT ANGLE P.C. MOUNT SWITCHES
PS
SERIES
5 AMP. (S.P.)
1 AMP. (D.P.)
0.4VA
ONE POLE EPOXY SEALED P.C. TERMINALS ARE SUPPLIED AS STANDARD FOR THESE OPTIONS.
1 Pole P.C. Mounting
PS 9
TWO POLE
2 Pole P.C. Mounting
PS 10
TWO POLE
2 Pole P.C. Mounting
PS 11
TWO POLE
2 Pole P.C. Mounting
PS 10
ONE POLE
1 Pole P.C. Mounting
PS 11
ONE POLE
1 Pole P.C. Mounting
EPOXY SEALED P.C. TERMINALS ARE SUPPLIED AS STANDARD FOR THESE OPTIONS.
EPOXY SEALED P.C. TERMINALS ARE SUPPLIED AS STANDARD FOR THESE OPTIONS.
EPOXY SEALED P.C. TERMINALS ARE SUPPLIED AS STANDARD FOR THESE OPTIONS.
EPOXY SEALED P.C. TERMINALS ARE SUPPLIED AS STANDARD FOR THESE OPTIONS.
EPOXY SEALED P.C. TERMINALS ARE SUPPLIED AS STANDARD FOR THESE OPTIONS.
MINIATURE SWITCHES
8Litho in U.S.A GG
SPECIFICATIONS
Contact Rating – Letter codes G and Q (1 Pole) 5
amp resistive @ 125 VAC (U.L. recognized, CSA
certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 amp
resistive @ 125 VAC (U.L. recognized, CSA certified) or
1 amp resistive @ 28 VDC.
Letter codes B and G – (1 and 2 Poles) 0.4 Volt-
amps (VA) maximum @ 28 V maximum (AC or DC).
Contact Resistance – 50 milliohms maximum.
Insulation Resistance – 1,000 megohms minimum.
Dielectric Strength – 1,000 volts RMS minimum at
sea level.
Electrical Life – 60,000 cycles minimum at full load-
resistive.
Maximum Allowable Installation Force on Plunger
– 10 pounds.
Multi-pole contacts do not make and break simul-
taneously.
MATERIALS
Case — Diallyl Phthalate.
Bushing — Brass, nickel plated.
Housing — Stainless steel.
Plunger — Thermoplastic.
Common Contact — Refer to contact material
table above.
Center & End Contact — Refer to contact material
table above.
Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type
0 - No Cap 0 - No Cap B - Gold/Nickel/Brass
7 - PC Mounted 1 - One 1 - .200 Dia. 1 - Black G - Gold/Nickel/Silver
PS 2 - Two 2 - .375 Dia. 2 - White Q - Coin Silver
8 - PC Mounted 3 - .450 Sq.
4 - .310 Dia.
Single pole circuit rated 5 amps, double pole circuit rated 1 amp.
Ratings are 0.4 VA — 28 VAC or DC.
ORDERING EXAMPLES:
PS7-100G = (PC mounted 5 amp.) One-pole No Cap No Color Silver Contacts
PS7 - 1 0 0 G
PS8-221B = (PC mounted 0.4 VA) Two-pole .375 Dia. Black Cap Brass Contacts
PS8 - 2 2 1 B
Gold/Nickel/
Sensitive Snap-Action Pushbutton Switches —
P.C. Terminals (Momentary Action)
VERTICAL P.C. MOUNT (.460 x .620 BRACKET)
PS
SERIES
5 AMP. (S.P.)
1 AMP. (D.P.)
0.4 VA
Printed Circuit Terminal
EPOXY SEAL
STD. FOR
THIS SERIES
PS7
(LONG BUSHING) SP DP
PS8
(SHORT BUSHING) SP DP
Gold/Nickel/
Description P/N Color
W-KN-16 Black
W-KN-16A White
W-KN-16B Red
W-KN-32 Black
W-KN-32A White
W-KN-32B Red
W-KN-17 Black
W-KN-17A White
W-KN-17B Red
W-KN-18 Black
W-KN-18A White
W-KN-18B Red
Square Cap
.450
Large Cap
.375
Medium Cap
.310
Small Cap
.200
1 Pole P.C. Mounting
2 Pole P.C. Mounting
MINIATURE SWITCHES
Litho in U.S.A GG 9
SPECIFICATIONS
Contact Rating – Letter codes G and Q (1 Pole) 5
amp resistive @ 125 VAC (U.L. recognized, CSA
certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 amp
resistive @ 125 VAC (U.L. recognized, CSA certified) or
1 amp resistive @ 28 VDC.
Letter codes B and G – (1 and 2 Poles) 0.4 Volt-
amps (VA) maximum @ 28 V maximum (AC or DC).
Contact Resistance – 50 milliohms maximum.
Insulation Resistance – 1,000 megohms minimum.
Dielectric Strength – 1,000 volts RMS minimum at
sea level.
Electrical Life – 60,000 cycles minimum at full load-
resistive.
Maximum Allowable Installation Force on Plunger
– 10 pounds.
Multi-pole contacts do not make and break simul-
taneously.
MATERIALS
Case — Diallyl Phthalate.
Bushing — Brass, nickel plated.
Housing — Stainless steel.
Plunger — Thermoplastic.
Common Contact — Refer to contact material
table above.
Center & End Contact — Refer to contact material
table above.
Description P/N Color
W-KN-16 Black
W-KN-16A White
W-KN-16B Red
W-KN-32 Black
W-KN-32A White
W-KN-32B Red
W-KN-17 Black
W-KN-17A White
W-KN-17B Red
W-KN-18 Black
W-KN-18A White
W-KN-18B Red
Square Cap
.450
Large Cap
.375
Medium Cap
.310
Small Cap
.200
Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type
0 - No Cap 0 - No Cap B - Gold/Nickel/Brass
71 - PC Mounted 1 - One 1 - .200 Dia. 1 - Black G - Gold/Nickel/Silver
PS 81 - PC Mounted 2 - Two 2 - .375 Dia. 2 - White Q - Coin Silver
3 - .450 Sq. 3 - Red
4 - .310 Dia.
Single pole circuit rated 5 amps, double pole circuit rated 1 amp.
Ratings are 0.4 VA — 28 VAC or DC.
ORDERING EXAMPLES:
PS71-100B= (PC mounted 0.4 VA) One-pole No Cap No Color Brass Contacts
PS71 - 1 0 0 B
PS81-221Q= (PC mounted 1 amp.) Two-pole .375 Dia. Black Cap Coin Silver Contacts
PS81 - 2 2 1 Q
Gold/Nickel/
Sensitive Snap-Action Pushbutton Switches —
P.C. Terminals (Momentary Action)
VERTICAL P.C. MOUNT (.630 x .620 BRACKET)
PS
SERIES
5 AMP. (S.P.)
1 AMP (D.P.)
0.4 VA
PS71
(LONG BUSHING) SP DP
PS81
(SHORT BUSHING) SP DP
Printed Circuit Terminal
EPOXY SEAL
STD. FOR
THIS SERIES
1 Pole P.C. Mounting
2 Pole P.C. Mounting
MINIATURE SWITCHES
10 Litho in U.S.A GG
SPECIFICATIONS
Contact Rating – Letter codes G and Q (1 Pole) 5
amp resistive @ 125 VAC (U.L. recognized, CSA
certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 amp
resistive @ 125 VAC (U.L. recognized, CSA certified) or
1 amp resistive @ 28 VDC.
Letter codes B and G – (1 and 2 Poles) 0.4 Volt-
amps (VA) maximum @ 28 V maximum (AC or DC).
Contact Resistance – 50 milliohms maximum.
Insulation Resistance – 1,000 megohms minimum.
Dielectric Strength – 1,000 volts RMS minimum at
sea level.
Electrical Life – 60,000 cycles minimum at full load-
resistive.
Maximum Allowable Installation Force on Plunger
– 10 pounds.
Multi-pole contacts do not make and break simul-
taneously.
MATERIALS
Case — Diallyl Phthalate.
Bushing — Brass, nickel plated.
Housing — Stainless steel.
Plunger — Thermoplastic.
Common Contact — Refer to contact material
table above.
Center & End Contact — Refer to contact material
table above.
Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type
0 - No Cap 0 - No Cap B - Gold/Nickel/Brass
72 - PC Mounted 1 - One 1 - .200 Dia. 1 - Black G - Gold/Nickel/Silver
PS 2 - Two 2 - .375 Dia. 2 - White Q - Coin Silver
82 - PC Mounted 3 - .450 Sq. 3 - Red
4 - .310 Dia.
Single pole circuit rated 5 amps, double pole circuit rated 1 amp.
Ratings are 0.4 VA — 28 VAC or DC.
ORDERING EXAMPLES:
PS72-100Q= (PC mounted 5 amp.) One-pole No Cap No Color Coin Silver Contacts
PS72 - 1 0 0 Q
PS82-221B= (PC mounted 0.4 VA) Two-pole .375 Dia. Black Cap Brass Contacts
PS
82 - 2 2 1 B
Sensitive Snap-Action Pushbutton Switches —
P.C. Terminals (Momentary Action)
VERTICAL P.C. MOUNT (.460 x .750 BRACKET)
PS
SERIES
5 AMP. (S.P.)
1 AMP. (D.P.)
0.4 VA
Printed Circuit Terminal
EPOXY SEAL
STD. FOR
THIS SERIES
PS72
(LONG BUSHING) SP DP
PS82
(SHORT BUSHING) SP DP
Gold/Nickel/
Description P/N Color
W-KN-16 Black
W-KN-16A White
W-KN-16B Red
W-KN-32 Black
W-KN-32A White
W-KN-32B Red
W-KN-17 Black
W-KN-17A White
W-KN-17B Red
W-KN-18 Black
W-KN-18A White
W-KN-18B Red
Square Cap
.450
Large Cap
.375
Medium Cap
.310
Small Cap
.200
1 Pole P.C. Mounting
2 Pole P.C. Mounting
MINIATURE SWITCHES
Litho in U.S.A GG 11
SPECIFICATIONS
Contact Rating – Letter codes G and Q (1 Pole) 5
amp resistive @ 125 VAC (U.L. recognized, CSA
certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 amp
resistive @ 125 VAC (U.L. recognized, CSA certified) or
1 amp resistive @ 28 VDC.
Letter codes B and G – (1 and 2 Poles) 0.4 Volt-
amps (VA) maximum @ 28 V maximum (AC or DC).
Contact Resistance – 50 milliohms maximum.
Insulation Resistance – 1,000 megohms minimum.
Dielectric Strength – 1,000 volts RMS minimum at
sea level.
Electrical Life – 60,000 cycles minimum at full load-
resistive.
Maximum Allowable Installation Force on Plunger
– 10 pounds.
Multi-pole contacts do not make and break simul-
taneously.
MATERIALS
Case — Diallyl Phthalate.
Bushing — Brass, nickel plated.
Housing — Stainless steel.
Plunger — Thermoplastic.
Common Contact — Refer to contact material
table above.
Center & End Contact — Refer to contact material
table above.
Description P/N Color
W-KN-16 Black
W-KN-16A White
W-KN-16B Red
W-KN-32 Black
W-KN-32A White
W-KN-32B Red
W-KN-17 Black
W-KN-17A White
W-KN-17B Red
W-KN-18 Black
W-KN-18A White
W-KN-18B Red
Square Cap
.450
Large Cap
.375
Medium Cap
.310
Small Cap
.200
Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type
0 - No Cap 0 - No Cap B - Gold/Nickel/Brass
1 - One 1 - .200 Dia. 1 - Black G - Gold/Nickel/Silver
PS 73 - PC Mounted 2 - Two 2 - .375 Dia. 2 - White Q - Coin Silver
83 - PC Mounted 3 - .450 Sq. 3 - Red
4 - .310 Dia.
Single pole circuit rated 5 amps, double pole circuit rated 1 amp.
Ratings are 0.4 VA — 28 VAC or DC.
ORDERING EXAMPLES:
PS73-100G= (PC mounted 5 amp.) One-pole No Cap No Color Silver Contacts
P S 73 - 1 0 0 G
PS83-221B= (PC mounted 0.4 VA) Two-pole .375 Dia. Black Cap Brass Contacts
P S 83 - 2 2 1 B
Gold/Nickel/
Sensitive Snap-Action Pushbutton Switches —
P.C. Terminals (Momentary Action)
VERTICAL P.C. MOUNT (.630 x .750 BRACKET)
PS
SERIES
5 AMP. (S.P.)
1 AMP (D.P.)
0.4 VA
PS73
(LONG BUSHING) SP DP
PS83
(SHORT BUSHING) SP DP
Printed Circuit Terminal
EPOXY SEAL
STD. FOR
THIS SERIES
1 Pole P.C. Mounting
2 Pole P.C. Mounting
Gold/Nickel/
MINIATURE SWITCHES
12 Litho in U.S.A GG
Sensitive Snap-Action Pushbutton Switches —
Solder and P.C. Terminals (Momentary Action)
PS
SERIES
5 AMP. (S.P.)
1 AMP (D.P.)
0.4 VA SNAP-IN MOUNT
Cap Configuration Optional Features
Basic P/N Terminal-Rating Poles Cap Size Cap Color Bezel Color & Type Contact Material-Type
PS 14 - Raised Cap 1 - One 0 - No Cap 0 - No Cap 1 - White B - Gold/Nickel/Brass
Solder Lug 2 - Two 1 - .450 Sq. 1 - White 2 - Black
15 - Flush Cap 2-Black 3-Red
Solder Lug 3 - Red 4 - Black or LED
16 - Raised Cap G - Gold/Nickel/Silver
PC Terminals Q - Coin Silver
17 - Flush Cap
PC Terminals
Single pole circuit rated 5 amps, double pole circuit rated 1 amp. Ratings are 0.4 VA — 28 BAC or DC. Flush cap is flush to bezel, not to mounting bracket.
SPECIFICATIONS
Contact Rating – Letter codes G and Q (1 Pole) 5
amp resistive @ 125 VAC (U.L. recognized, CSA
certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 amp
resistive @ 125 VAC (U.L. recognized, CSA certified) or
1 amp resistive @ 28 VDC.
Letter codes B and G – (1 and 2 Poles) 0.4 Volt-
amps (VA) maximum @ 28 V maximum (AC or DC).
Contact Resistance – 50 milliohms maximum.
Insulation Resistance – 1,000 megohms minimum.
Dielectric Strength – 1,000 volts RMS minimum at
sea level.
Electrical Life – 60,000 cycles minimum at full load-
resistive.
Maximum Allowable Installation Force on Plunger
– 10 pounds. Multi-pole contacts do not make and
break simultaneously.
MATERIALS
Case — Diallyl Phthalate.
Bushing — Brass, nickel plated.
Housing — Stainless steel.
Plunger — Thermoplastic.
Pushbutton Cap — Molded nylon.
Bezel — Molded nylon.
Common Contact — Refer to contact material
table above.
Center & End Contact — Refer to contact
material table above.
Solder Lug Terminal
PC Terminal
EXAMPLES:
PS14-100Q = Raised Cap, Solder Lug Terminals, 5 Amp, Single Pole, No Cap, Coin Silver Contacts
PS14-1134B = Raised Cap, Solder Lug Terminals, 0.4 VA Rating, Single Pole, .450 Square Red Cap, Black Bezel for LED, Gold/Brass
Contact Material
LED Not Included
PS14 SHOWN
w/RAISED CAP
PS15 SHOWN
w/FLUSH CAP
MINIATURE SWITCHES
Litho in U.S.A GG 13
• For thick plastic panel mount applications (.094” - .125” thick)
• For availability consult Electroswitch.
Sensitive Snap-Action Pushbutton Switches —
Solder and P.C. Terminals (Momentary Action)
APPROXIMATE DIMENSIONS (For Optional Bezel Types Shown on Page 12)
OPTIONAL BEZEL TYPE
1, 2, 3 (SEE TABLE)
PS14 Shown w/Raised Cap
OPTIONAL BEZEL TYPE
1, 2, 3 (SEE TABLE)
PS15 Shown w/Flush Cap
OPTIONAL BEZEL TYPE 4
FOR LED
PS14 Shown w/Raised Cap
OPTIONAL BEZEL TYPE 4
FOR LED
PS17 Shown w/Flush Cap
Catalog No. Color
W-BZ-12 Black
W-BZ-12A White
W-BZ-12B Red
Catalog No. Color
W-BZ-12 Black
W-BZ-12A White
W-BZ-12B Red
Catalog No. Color
W-BZ-15 Black
Catalog No. Color
W-BZ-15 Black
OPTIONAL MOUNTING CLIP (For Use With PS14 Thru PS17 Series Only)
SWITCHES SUPPLIED
WITHOUT LED LAMPS.
SWITCHES SUPPLIED
WITHOUT LED LAMPS.
