DG441LE, DG442LE www.vishay.com Vishay Siliconix 16 , Low Charge Injection and Leakage, +12 V / +5 V / +3 V / 5 V Quad SPST Switches DESCRIPTION FEATURES The DG441LE, DG442LE monolithic quad single-pole-single-throw analog switches are designed to provide high speed, low error switching of analog signals. The DG441LE has a normally closed function. The DG442LE has a normally open function. * 3 V to 16 V single supply or 3 V to 8 V dual supply Available * On-resistance RDS(on): 16 * Fast switching tON: 18 ns,typ. Available * Low parasitic capacitance: CD(ON): 15 pF CS(OFF): 5 pF Available * Less than 8 pC charge injection over the full signal swing range * Low leakage: < 10 pA, typ. * TTL, CMOS compatible * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 The DG441LE, DG442LE feature low charge injection of a few picocoulombs over the full analog switch range. Combining low on resistance (16 , typ.), low parasitic capacitance (CD(ON) 15 pF), and fast switching speed (tON, 18 ns, typ.), the devices are ideal for data acquisition, sample-and-hold, and ADC input circuit designs. The DG441LE, DG442LE operate on single and dual supplies. Single supply voltage ranges from 3 V to 16 V while dual supply operation is recommended with 3 V to 8 V. Each switch conducts equally well in both direction when on, and blocks input voltages up to the supply levels when off. The DG441LE, DG442LE are available in 16 lead TSSOP, SOIC, and PDIP packages. Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. BENEFITS * * * * Wide operation voltage range Low signal errors and distortion Fast switching time Minimized switching glitch APPLICATIONS * * * * * * * * * Automatic test equipment Process control and automation Data acquisition systems Meters and instruments Medical and healthcare systems Communication systems Audio and video signal routing Relay replacement Battery powered systems FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION Dual-In-Line, TSSOP and SOIC IN1 1 16 IN2 D1 2 15 D2 TRUTH TABLE S1 3 14 S2 V- 4 13 V+ GND 5 12 NC DG441LE / 442LE LOGIC DG441LE DG442LE 0 On Off 1 Off On Logic "0" 0.8 V Logic "1" 2.4 V Top View S4 6 11 S3 D4 7 10 D3 IN4 8 9 IN3 S16-0392-Rev. A, 07-Mar-16 Document Number: 76754 1 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG441LE, DG442LE www.vishay.com Vishay Siliconix OODERING INFORMATION TEMP. RANGE CONFIGURATION PACKAGE 16-pin TSSOP DG441LE 16-pin SOIC 16-pin PDIP -40 C to +85 C Lead (Pb)-free 16-pin TSSOP DG442LE 16-pin SOIC 16-pin PDIP PART NUMBER MIN. ORDER / PACK. QUANTITY DG441LEDQ-GE3 Tube 360 units DG441LEDQ-T1-GE3 Tape and reel, 3000 units DG441LEDY-GE3 Tube 500 units DG441LEDY-T1-GE3 Tape and reel, 2500 units DG441LEDJ-GE3 Tube 500 units DG442LEDQ-GE3 Tube 360 units DG442LEDQ-T1-GE3 Tape and reel, 3000 units DG442LEDY-GE3 Tube 500 units DG442LEDY-T1-GE3 Tape and reel, 2500 units DG442LEDJ-GE3 Tube 500 units ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise noted) PARAMETER SYMBOL V+ to V- LIMIT -0.3 to +18 GND to V-A 18 V GND -0.3 to (V +) + 0.3 or 30 mA, whichever occurs first Digital Inputs a VS, VD Continuous Current (any terminal) 30 Current, S or D (pulsed 1 ms, 10 % duty cycle) 100 Storage Temperature Power Dissipation (packages) UNIT b (DQ, DY suffix) -65 to +125 (AK suffix) -65 to +150 16-pin TSSOP c 450 16-pin narrow body SOIC d 650 16-pin CerDIP e 900 mA C mW ESD Human Body Model (HBM); per ANSI / ESDA / JEDEC(R) JS-001 2500 V Latch Up Current, per JESD78D 400 mA Notes a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 7 mW/C above 75 C. d. Derate 7.6 mW/C above 75 C. e. Derate 12 mW/C above 75 C. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S16-0392-Rev. A, 07-Mar-16 Document Number: 76754 2 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG441LE, DG442LE www.vishay.com SPECIFICATIONS a Vishay Siliconix (single supply 12 V) PARAMETER SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 12 V, V- = 0 V VIN = 2.4 V, 0.8 V f TEMP. b TYP. c A SUFFIX D SUFFIX LIMITS LIMITS -55 C to +125 C -40 C to +85 C MIN. d MAX. d UNIT MIN. d MAX. d Analog Switch Analog Signal Range e Drain-Source On-Resistance VANALOG RDS(on) On-Resistance Match Between Channels e RDS(on) IS(off) Switch Off Leakage Current ID(off) Full - 0 12 0 12 V+ = 10.8 V, V- = 0 V IS = 10 mA, VD = 2 V / 9 V Room 16 - 26 - 26 Full - - 40 - 35 IS = 10 mA, VD = 9 V Room 0.1 - 0.5 - 0.5 VD = 1 V / 11 V, VS = 11 V / 1 V - -1 1 -1 1 Full - -15 15 -10 10 Room - -1 1 -1 1 Full - -15 15 -10 10 Room - -1 1 -1 1 Full - -15 15 -10 10 VIN under test = 0.8 V Full 0.01 -1.5 1.5 -1 1 VIN under test = 2.4 V Full - -1.5 1.5 -1 1 Room 18 - 60 - 60 Full - - 80 - 70 Room 18 - 35 - 35 Full - - 50 - 45 ID(on) VS = VD = 11 V / 1 V Input Current, VIN Low IIL Input Current, VIN High IIH Channel On Leakage Current Room V nA Digital Control A Dynamic Characteristics Turn-On Time tON Turn-Off Time tOFF RL = 300 , CL = 35 pF VS = 5 V, see figure 2 Q Vg = 0 V, Rg = 0 , CL = 10 nF Room 6.6 - - - - Off Isolation e OIRR Room 68.4 - - - - Channel-to-Channel Crosstalk e XTALK RL = 50 , CL = 5 pF, f = 1 MHz Room 114 - - - - Room 5 - - - - Room 6 - - - - Charge Injection e Source Off Capacitance e CS(off) Drain Off Capacitance e CD(off) Channel On Capacitance e CD(on) Room 15 - - - - Positive Supply Current I+ Full 0.03 - 1.5 - 1 Negative Supply Current I- f = 1 MHz ns pC dB pF Power Supplies Ground Current S16-0392-Rev. A, 07-Mar-16 IGND VIN = 0 V or 12 V Room - -1 - -1 - Full 0.002 -7.5 - -5 - Full 0.002 -1.5 - -1 - A Document Number: 76754 3 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG441LE, DG442LE www.vishay.com SPECIFICATIONS a PARAMETER Vishay Siliconix (dual supply 5 V) SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 5 V, V- = -5 V VIN = 2.4 V, 0.8 V f TEMP. b TYP. c A SUFFIX D SUFFIX LIMITS LIMITS -55 C to +125 C -40 C to +85 C UNIT MIN. d MAX. d MIN. d MAX. d Analog Switch Analog Signal Range e Drain-Source On-Resistance On-Resistance Match Between Channels e Switch Off Leakage Current g VANALOG Full - -5 5 -5 5 RDS(on) V+ = 5 V, V- = -5 V IS = 10 mA, VD = 3.5 V Room 18 - 30 - 30 Full - - 42 - 37 RDS(on) IS = 10 mA, VD = 3.5 V Room 0.1 - 0.5 - 0.5 Room - -1 1 -1 1 Full - -15 15 -10 10 Room - -1 1 -1 1 Full - -15 15 -10 10 IS(off) ID(off) Channel On Leakage Current g V+ = 5.5, V- = -5.5 V VD = 4.5 V, VS = 4.5 V ID(on) V+ = 5.5 V, V- = -5.5 V VS = VD = 4.5 V Room - -1 1 -1 1 Full - -15 15 -10 10 Input Current, VIN Low e IIL VIN under test = 0.8 V Full 0.05 -1.5 1.5 -1 1 Input Current, VIN High e IIH VIN under test = 2.4 V Full 0.05 -1.5 1.5 -1 1 Room 65 V nA Digital Control A Dynamic Characteristics Turn-On Time Turn-Off Time Charge Injection e tON tOFF Q Off Isolation e OIRR Channel-to-Channel Crosstalk e XTALK Source Off Capacitance e CS(off) Drain Off Capacitance e CD(off) Channel On Capacitance e CD(on) 42 - 65 - RL = 300 , CL = 35 pF VS = 3.5 V, see figure 2 Full - - 90 - 75 Room 34 - 45 - 45 Full - - 65 - 55 Vg = 0 V, Rg = 0 , CL = 10 nF Room 5.8 - - - - Room 68.4 - - - - Room 113 - - - - Room 5 - - - - Room 6 - - - - Room 14 - - - - RL = 50 , CL = 5 pF, f = 1 MHz f = 1 MHz ns pC dB pF Power Supplies Positive Supply Current e Negative Supply Current e Ground Current e S16-0392-Rev. A, 07-Mar-16 I+ IIGND VIN = 0 V or 5 V Full 0.002 - 1.5 - 1 Room -0.002 -1 - -1 - Full - -7.5 - -5 - Full -0.002 -1.5 - -1 - A Document Number: 76754 4 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG441LE, DG442LE www.vishay.com SPECIFICATIONS a PARAMETER Vishay Siliconix (single supply 5 V) SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 5 V, V- = 0 V VIN = 2.4 V, 0.8 V f TEMP. b TYP. c A SUFFIX D SUFFIX LIMITS LIMITS -55 C to +125 C -40 C to +85 C UNIT MIN. d MAX. d MIN. d MAX. d Analog Switch Analog Signal Range e Drain-Source On-Resistance e On-Resistance Match Between Channels e VANALOG Full - - 5 - 5 RDS(on) V + = 4.5 V IS = 5 mA, VD = 1 V, 3.5 V Room 36 - 50 - 50 Full - - 88 - 75 RDS(on) IS = 10 mA, VD = 3.5 V Room 0.5 - 1 - 1 Room 53 - 70 - 70 V Dynamic Characteristics Turn-On Time e Turn-Off Time e Charge Injection e tON tOFF Q RL = 300 , CL = 35 pF VS = 3.5 V, see figure 2 Hot - - 90 - 80 Room 34 - 50 - 50 Hot - - 70 - 60 Vg = 0 V, Rg = 0 , CL = 10 nF Room 3.3 - - - - ns pC Power Supplies Positive Supply Current e Negative Supply Current e Ground Current e S16-0392-Rev. A, 07-Mar-16 I+ IIGND VIN = 0 V or 5 V Full 10 - 200 - 100 Room -0.002 -1 - -1 - Full - -7.5 - -5 - Full -10 -200 - -100 - A Document Number: 76754 5 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG441LE, DG442LE www.vishay.com SPECIFICATIONS a PARAMETER Vishay Siliconix (single supply 3 V) SYMBOL TEST CONDITIONS UNLESS OTHERWISE SPECIFIED V+ = 3 V, V- = 0 V VIN = 0.4 V f TEMP. b TYP. c A SUFFIX D SUFFIX LIMITS LIMITS -55 C to +125 C -40 C to +85 C UNIT MIN. d MAX. d MIN. d MAX. d Analog Switch Analog Signal Range e Drain-Source On-Resistance On-Resistance Match Between Channels e Switch Off Leakage Current g VANALOG Full - 0 3 0 3 RDS(on) V+ = 2.7 V, V- = 0 V IS = 5 mA, VD = 0.5 V, 2.2 V Room 106 - 130 - 130 Full - - 150 - 140 RDS(on) IS = 5 mA, VD = 2.2 V Room 1 - 3 - 3 IS(off) ID(off) Channel On Leakage Current g V+ = 3.3, V- = 0 V VD = 1 V, 2 V, VS = 2 V, 1 V Room - -1 1 -1 1 Full - -15 15 -10 10 Room - -1 1 -1 1 Full - -15 15 -10 10 ID(on) V+ = 3.3 V, V- = 0 V VS = VD = 1 V, 2 V Room - -1 1 -1 1 Full - -15 15 -10 10 Input Current, VIN Low e IIL VIN under test = 0.4 V Full 0.005 -1.5 1.5 -1 1 Input Current, VIN High e IIH VIN under test = 2.4 V Full 0.005 -1.5 1.5 -1 1 Room V nA Digital Control A Dynamic Characteristics Turn-On Time tON Turn-Off Time tOFF Charge Injection e Q Off Isolation e OIRR Channel-to-Channel Crosstalk e XTALK Source Off Capacitance e CS(off) Drain Off Capacitance e CD(off) Channel On Capacitance e CD(on) 141 - 200 - 200 RL = 300 , CL = 35 pF VS = 1.5 V, see figure 2 Full - - 220 - 210 Room 84 - 120 - 120 Full - - 140 - 130 Vg = 0 V, Rg = 0 , CL = 10 nF Room 2 - - - - Room 68 - - - - Room 107 - - - - Room 6 - - - - Room 7 - - - - Room 15 - - - - RL = 50 , CL = 5 pF, f = 1 MHz f = 1 MHz ns pC dB pF Notes a. Refer to PROCESS OPTION FLOWCHART. b. Room = 25 C, full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet. e. Guaranteed by design, not subject to production test. f. VIN = input voltage to perform proper function. g. Leakage parameters are guaranteed by worst case test conditions and not subject to test. S16-0392-Rev. A, 07-Mar-16 Document Number: 76754 6 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG441LE, DG442LE www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) 35 30 30 +125 C +125 C RON - On-Resistance () RON - On-Resistance () 25 +85 C 20 15 10 +25 C 5 25 20 15 10 -55 C -40 C +25 C 5 V+ = +12 V IS = 10 mA 0 -55 C -40 C V = 5 V IS = 10 mA 0 0 1 2 3 4 5 6 7 8 9 -5 10 11 12 -4 -3 -2 -1 0 1 2 3 4 VD - Analog Voltage (V) VD - Analog Voltage (V) RDS(on) vs. Analog Voltage and Temperature RDS(on) vs. Drain Voltage and Temperature 90 5 24 V+ = +3 V 80 TA = 25 C IS = 10 mA TA = 25 C IS = 10 mA 22 70 20 RON - On-Resistance () RON - On-Resistance () +85 C 60 50 V+ = +5 V 40 V+ = +12 V 30 V+ = +16 V 18 V = 5 V 16 14 12 20 10 10 8 0 V = 8 V 6 0 2 4 6 8 10 12 14 -8 16 -6 -4 -2 0 2 4 VD - Analog Voltage (V) VD - Analog Voltage (V) RDS(on) vs. Analog Voltage RDS(on) vs. Analog Voltage 6 8 40 V+ = +5 V 30 ID(ON) Leakage Current (pA) 20 10 0 -10 ID(OFF) IS(OFF) -20 -30 -40 -5 -4 -3 -2 -1 0 1 2 3 4 5 VD - Drain Voltage (V), VS = -VD Leakage Current vs. Drain Voltage (Dual Supply) S16-0392-Rev. A, 07-Mar-16 Document Number: 76754 7 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG441LE, DG442LE www.vishay.com Vishay Siliconix 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 120 110 100 Single Supply Switching Speed (ns) Switching Speed (ns) TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) tON Dual Supply 90 80 70 60 tON 50 40 tOFF 30 20 tOFF 10 0 2 4 6 8 10 12 14 16 3 4 6 7 8 Switching Time vs. Dual Supply Switching Time vs. Single Supply 20 20 Single Supply CD(ON), V+ = +3 V 16 Dual Supply 18 CD(ON), V+ = +5 V 14 12 CD(OFF), V+ = +3 V CD(OFF), V+ = +5 V CD(OFF), V+ = +12 V 10 8 CD(ON), V = 5 V 16 CD(ON), V+ = +12 V Capacitance (pF) 18 Capacitance (pF) 5 V+/- - Positive Supply Voltage (V) V+ - Positive Supply Voltage (V) 14 12 10 6 CD(OFF), V = 5 V 8 6 4 4 CS(OFF), V+ = +3 V CS(OFF), V+ = +5 V 2 CS(OFF), V = 5 V 2 CS(OFF), V+ = +12 V 0 0 0 1 2 3 4 5 6 7 8 9 10 11 12 -5 -4 -3 -2 -1 0 1 2 3 4 5 Analog Voltage (V) Analog Voltage (V) Capacitance vs. Analog Voltage (Dual Supply) Capacitance vs. Analog Voltage (Single Supply) 50 +125 C RON - On-Resistance () 45 +85 C 40 35 30 25 20 -40 C +25 C V+ = +5 V IS = 10 mA 15 -55 C 10 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 VD - Analog Voltage (V) RDS(on) vs. Analog Voltage and Temperature S16-0392-Rev. A, 07-Mar-16 Document Number: 76754 8 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG441LE, DG442LE www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) 10 2.0 0 1.9 -10 1.8 1.6 Loss, OIRR, XTALK (dB) VTH - Threshold (V) 1.7 VIL 1.5 Insertion Loss, -3dB = 301 MHz -20 VIH 1.4 1.3 1.2 -30 V+ = +3 V V- = 0 V -40 -50 OIRR -60 -70 XTALK -80 -90 1.1 -100 1.0 -110 -120 100K 0.9 2 4 6 8 10 12 14 16 1M V+ - Positive Supply Voltage (V) Input Threshold vs. Single Supply Voltage V+ = 12 V 90 V = 5 V 7.0 6.0 5.0 V+ = 5 V 4.0 V+ = +5.5 V V- = 0 V IN = 0 V 80 3.0 2.0 I+ - Supply Current (nA) QINJ - Charge Injection (pC) 1G 100 9.0 1.0 100M Insertion Loss, Off Isolation and Crosstalk vs. Frequency (Single Supply) 10.0 8.0 10M Frequency (Hz) 70 60 50 40 30 20 V+ = 3 V 0 10 0 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12 VD - Analog Voltage (V) Charge Injection vs. Analog Voltage S16-0392-Rev. A, 07-Mar-16 -40 -20 0 20 40 60 80 100 120 Temperature (C) Supply Current vs. Temperature Document Number: 76754 9 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG441LE, DG442LE www.vishay.com Vishay Siliconix SCHEMATIC DIAGRAM (typical channel) V+ S Level Shift/ Drive VIN D GND V- Fig. 1 TEST CIRCUITS V+ Logic Input V+ IN VO RL 1 k 3V GND tr < 20 ns tf < 20 ns 50 % 50 % 0V D S VS 3V CL 35 pF tOFF Switch Input VS Switch Output 0V VO 80 % 80 % V- VCL (includes fixture and stray capacitance) Note: tON Logic input waveform is inverted for DG442. Fig. 2 - Switching Time V+ V O Rg VO V+ S D IN INX OFF ON OFF (DG441) CL 1 nF 3V GND VO VINX OFF ON Q = VO x CL OFF (DG442) V- Fig. 3 - Charge Injection S16-0392-Rev. A, 07-Mar-16 Document Number: 76754 10 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG441LE, DG442LE www.vishay.com Vishay Siliconix TEST CIRCUITS C = 1 F tantalum in parallel with 0.01 F ceramic V+ C V+ S1 VS Rg = 50 D1 50 IN1 0 V, 2.4 V NC 0 V, 2.4 V S2 VO D2 RL IN2 GND V- C VVS XTA LK Isolation = 20 log C = RF bypass VO Fig. 4 - Crosstalk V+ C V+ S VS VO D Rg = 50 0 V, 2.4 V RL IN GND V- C VOff Isolation = 20 log VS VO Fig. 5 - Off Isolation V+ C S V+ Meter IN HP4192A Impedance Analyzer or Equivalent 0 V, 2.4 V D GND V- C V- Fig. 6 - Source / Drain Capacitances S16-0392-Rev. A, 07-Mar-16 Document Number: 76754 11 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG441LE, DG442LE www.vishay.com Vishay Siliconix APPLICATIONS + 24 V + 12 V RL DG442L V+ I = 3A 150 + 12 V VN0300L, M + 12 V IN VIN 10 k 1/4 DG442L S + + 12 V D VOUT - CH + - GND VIN 0V 0 = Load Off 1 = Load On Fig. 7 - Power MOSFET Driver VIN H = Sample L = Hold Fig. 8 - Open Loop Sample-and-Hold + - VOUT + 12 V Gain error is determined only by the resistor tolerance. Op amp offset and CMRR will limit accuracy of circuit. V+ GAIN1 AV = 1 R1 90 k GAIN2 A V = 10 R2 5 k With SW4 Closed VOUT = R1 + R2 + R3 + R4 VIN GAIN3 A V = 20 R3 4 k GAIN4 A V = 100 R4 1 k = 100 R4 DG441L or DG442L V- GND V Fig. 9 - Precision-Weighted Resistor Programmable-Gain Amplifier Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?76754. S16-0392-Rev. A, 07-Mar-16 Document Number: 76754 12 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix SOIC (NARROW): 16LEAD JEDEC Part Number: MS-012 MILLIMETERS 16 15 14 13 12 11 10 Dim A A1 B C D E e H L 9 E 1 2 3 4 5 6 7 8 INCHES Min Max Min Max 1.35 1.75 0.053 0.069 0.10 0.20 0.004 0.008 0.38 0.51 0.015 0.020 0.18 0.23 0.007 0.009 9.80 10.00 0.385 0.393 3.80 4.00 0.149 0.157 1.27 BSC 0.050 BSC 5.80 6.20 0.228 0.244 0.50 0.93 0.020 0.037 0_ 8_ 0_ 8_ ECN: S-03946--Rev. F, 09-Jul-01 DWG: 5300 H D C All Leads e Document Number: 71194 02-Jul-01 B A1 L 0.101 mm 0.004 IN www.vishay.com 1 Package Information Vishay Siliconix PDIP: 16LEAD 16 15 14 13 12 11 10 9 E E1 1 2 3 4 5 6 7 8 D S Q1 A A1 L 15 MAX C B1 e1 Dim A A1 B B1 C D E E1 e1 eA L Q1 S B eA MILLIMETERS Min Max INCHES Min Max 3.81 5.08 0.150 0.200 0.38 1.27 0.015 0.050 0.38 0.51 0.015 0.020 0.89 1.65 0.035 0.065 0.20 0.30 0.008 0.012 18.93 21.33 0.745 0.840 7.62 8.26 0.300 0.325 5.59 7.11 0.220 0.280 2.29 2.79 0.090 0.110 7.37 7.87 0.290 0.310 2.79 3.81 0.110 0.150 1.27 2.03 0.050 0.080 0.38 1.52 .015 0.060 ECN: S-03946--Rev. D, 09-Jul-01 DWG: 5482 Document Number: 71261 06-Jul-01 www.vishay.com 1 Package Information Vishay Siliconix TSSOP: 16-LEAD DIMENSIONS IN MILLIMETERS Symbols Min Nom Max A - 1.10 1.20 A1 0.05 0.10 0.15 A2 - 1.00 1.05 0.38 B 0.22 0.28 C - 0.127 - D 4.90 5.00 5.10 E 6.10 6.40 6.70 E1 4.30 4.40 4.50 e - 0.65 - L 0.50 0.60 0.70 L1 0.90 1.00 1.10 y - - 0.10 1 0 3 6 ECN: S-61920-Rev. D, 23-Oct-06 DWG: 5624 Document Number: 74417 23-Oct-06 www.vishay.com 1 PAD Pattern www.vishay.com Vishay Siliconix RECOMMENDED MINIMUM PAD FOR TSSOP-16 0.193 (4.90) 0.171 0.014 0.026 0.012 (0.35) (0.65) (0.30) (4.35) (7.15) 0.281 0.055 (1.40) Recommended Minimum Pads Dimensions in inches (mm) Revision: 02-Sep-11 1 Document Number: 63550 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Application Note 826 Vishay Siliconix RECOMMENDED MINIMUM PADS FOR SO-16 RECOMMENDED MINIMUM PADS FOR SO-16 0.372 (9.449) 0.152 0.022 0.050 0.028 (0.559) (1.270) (0.711) (3.861) 0.246 (6.248) 0.047 (1.194) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index APPLICATION NOTE Return to Index www.vishay.com 24 Document Number: 72608 Revision: 21-Jan-08 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000