A Schnitt A-A 3,05 H max. 1,33 7 E J A / cross-section A-A: A D F L G 14,5 Polzahl / Part No. : 9 30.8 16.33 25.0 7.9 12.55 10.9 6.3 19.3 10.71 0.76 C 15 39.1 24.66 33.3 7.9 12.55 10.9 6.3 27.5 10.71 0.76 25 53.0 38.38 47.0 7.9 12.55 10.9 6.3 41.3 10.71 0.76 37 69.3 54.84 63.5 7.9 12.55 10.9 6.3 57.7 10.71 0.76 Refer to table on page 2 No. of contacts : Anschluart / SKEC Terminal Type : Anschlulange / Terminal Length : Bauart / - Type : Zubehor / Logo : Class : B 0.13 207=0.8m (30 in) Au CONTACT, TIN/LEAD TERMINAL NIET Special : - C 0.2 D E F G H 0.13 0.38 0.25 max. 0.3 J L 0.25 0.25 Missing information and dimensions according to DIN 41652 Fehlende Masse und Angaben siehe DIN 41652 / Sonstige Angaben siehe Fertigungsunterlagen / - - Accessory : Sonderausfuhrung / A 0.4 Information: Anforderungsstufe / Aufdruck / Polzahl/ No. of contacts - Additional indications please see the production documentation Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / B All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date TMC-S 9 bis 37-SKEC TMC-S 9 to 37-SKEC www.ERNI.com Index Designation M:00021192.SZN 054978 TMCS I Ordering Information D-Sub Connector IDC - Discrete Wire Vertical Female Number of Pins 9 15 25 37 Accessory Termination Side: Through hole 063526 063531 063527 Ordering Information for Processing Tools Version Standard Hand Crimp Tool 124774 Automatic Hand Crimp Tool 124775 Tool support for Table mounting 124776 Contact Extraction tool 124777 www.erni.com 063535