RS, NS Vishay Dale Wirewound Resistors, Military, MIL-PRF-26 Qualified, Type RW, Precision Power, Silicone Coated FEATURES * * * * High temperature coating Complete welded construction Pb-free Available Meets applicable requirements of MIL-PRF-26 Available in non-inductive styles (type NS) with Aryton-Perry winding for lowest reactive components e3 * Excellent stability in operation RoHS* * Lead (Pb)-Free version is RoHS Compliant COMPLIANT STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MIL-PRF-26 MODEL U RS1/8 RS1/4 RS1/2 RS01A RS01A...300 RS-18 RS-1/4 RS-1/2 RS-1A RS-1A-300 TYPE -- -- -- -- RW70*** RS01M RS002 RS02M RS02B RS02B...300 RS-1M RS-2 RS-2M RS-2B RS-2B-300 -- -- -- -- RW79*** RS02C RS02C...17 RS02C...23 RS-2C RS-2C-17 RS-2C-23 -- -- RW69** RS005 RS005...69 RS-5 RS-5-69 -- RW74*** RS005...70 RS-5-70 RW67** RS007 RS010 RS010...38 RS-7 RS-10 RS-10-38 -- -- RW78*** RS010...39 RS-10-39 RW68** RESISTANCE RANGE MIL. RANGE SHOWN IN BOLD FACE POWER RATING**** P25C W WEIGHT (Typical) V 0.05% 3% thru thru 5% 10% 0.125 0.4 0.75 1.0 1.0 1.0 1.0 4.0 3.0 3.0 3.0 3.0 2.5 2.5 -- -- -- -- -- -- -- -- 5.5 -- 3.75 -- -- 3.25 3.25 3.25 3.0 6.5 -- -- 6.5 6.5 9.0 13.0 -- - 13.0 11.0 5.0 5.0 5.0 -- -- 7.0 10.0 10.0 10.0 -- -- 0.05% 0.1% 0.25% 0.5% & 1% -- 1 - 1k 1 - 1.3k 1 - 2.74k -- 0.499 - 1k 0.499 - 1.3k 0.499 - 2.74k 0.499 - 2.74k -- 0.499 - 3.4k 0.499 - 4.9k 0.499 - 10.4k 0.499 - 10.4k 0.1 - 950 0.1 - 3.4k 0.1 - 4.9k 0.1 - 10.4k 0.1 - 10.4k 0.1 - 2.74k 0.1 - 6.85k 0.1 - 47.1k 0.1 - 18.74k 0.1 - 24.5k 0.1 - 24.5k 0.1 - 6.49k 0.1 - 32.3k 0.1 - 32.3k -- 1 - 1.32k 0.499 - 1.67k 0.499 - 6.85k 0.499 - 12.7k 0.499 - 12.7k 0.1 - 47.1k 0.499 - 4.49k 0.499 - 4.49k 0.1 - 18.74k 0.499 - 6.5k 0.499 - 6.5k 0.1 - 24.5k -- 0.499 - 6.5k 0.1 - 24.5k --_ 0.499 - 8.6k 0.499 - 8.6k 0.1 - 32.3k 0.499 - 6.8k 0.499 - 8.6k 0.1 - 32.3k -- -- 0.499 - 25.7k 0.499 - 25.7k -- 0.499 - 25.7k -- -- -- 0.1 - 95.2k 0.1 - 95.2k 0.1 - 95.2k 0.1 - 95.2k 0.1 - 24.3k -- 0.499 - 41.4k 0.499 - 41.4k 0.499 - 73.4k 0.499 - 73.4k 0.499 - 73.4k -- -- -- -- 0.1 - 154k 0.1 - 273k 0.1 - 273k 0.1 - 154k 0.1 - 273k 0.1 - 273k 0.1 - 71.5k -- -- 3%, 5%, 10% 0.1 - 950 0.1 - 3.4k 0.1 - 4.9k 0.1 - 10.4k 0.1 - 10.4k g 0.15 0.21 0.23 0.34 0.34 0.1 - 6.85k 0.1 - 47.1k 0.1 - 18.74k 0.1 - 24.5k 0.1 - 24.5k 0.30 2.10 0.65 0.70 0.1 - 32.3k 0.1 - 32.3k 0.1 - 32.3k 0.1 - 2.0k 0.1 - 95.2k 0.1 - 95.2k 1.6 1.6 -- 0.70 16 4.2 4.2 0.1 - 95.2k 0.1 - 8.2k 0.1 - 154k 0.1 - 273k 0.1 - 273k 4.7 9.0 0.1 - 273k 0.1 - 20k 9.0 4.2 9.0 ** Available tolerance for these Mil parts is 5% for 1 and above, 10% below 1. ***Available tolerance for these Mil parts is 0.5% & 1% for resistance values 0.1 and above, 0.1% for resistance values 0.499 and above.. ****Vishay Dale RS models have two power ratings depending on operation temperature and stability requirements. NOTE: Shaded area indicates most popular models. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RS02C10K00FS7017 (preferred part numbering format) R GLOBAL MODEL S 0 2 RESISTANCE VALUE R = Decimal K = Thousand 15R00 = 15 10K00 = 10K C 1 0 K 0 0 F TOLERANCE CODE S 7 0 1 7 PACKAGING SPECIAL A = 0.05% B = 0.1% *E70 = Lead Free, Tape/Reel (smaller than RS005) C = 0.25% D = 0.5% *E73 = Lead Free, Tape/Reel (RS005 & larger) F = 1.0% J = 5.0% *E12 = Lead Free, Bulk K = 10.0% Lead Free is not available on RW military type *(Lead Free parts to be released Q1 2005) S70 = Tin/Lead, Tape/Reel (smaller than RS005) S73 = Tin/Lead, Tape/Reel (RS005 & larger) B12 = Tin/Lead, Bulk Historical Part Number example: RS-2C-17 10K 1% S70 (will continue to be accepted) RS02C RS-2C-17 HISTORICAL MODEL (Dash Number) (up to 3 digits) From 1-999 as applicable 10K 1% S70 RESISTANCE VALUE TOLERANCE CODE PACKAGING * Pb containing terminations are not RoHs compliant, exemptions may apply www.vishay.com 124 For technical questions, contact ww2bresistors@vishay.com Document Number 30204 Revision 10-Oct-05 RS, NS Vishay Dale Wirewound Resistors, Military, MIL-PRF-26 Qualified, Type RW, Precision Power, Silicone Coated DIMENSIONS 1.50 [38.10]* Min. A GLOBAL MODEL A DIMENSIONS in inches [millimeters] B C D (Max.)** B C *On some standard reel pack methods, the leads may be trimmed to a shorter length than shown. NOTE: RS-1/8 terminal length will be 1.0" [25.4mm] minimum. MATERIAL SPECIFICATIONS Element: Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: Ceramic, steatite or alumina, depending on physical size Coating: Special high temperature silicone Standard Terminals: 100% Sn, or 60/40 Sn/Pb coated Copperweld(R). NOTE: Military "RW" parts are only available with 60/40 Sn/Pb finish. End Caps: Stainless steel Deviations for RS-1/8: Thermoset silicone molded construction, endcaps will be nickel-silver alloy and terminals will be tinned copper Part Marking: DALE, Model, Wattage*, Value, Tolerance, Date Code *Wattage marked on part will be "U" characteristic RATED POWER IN % RS1/8 0.155 0.015 [3.94 0.381] -- 0.065 0.015 [1.65 0.381] 0.020 0.002 [0.508 0.051] RS1/4 0.250 0.031 [6.35 0.787] 0.281 [7.14] 0.085 0.020 [2.16 0.508] 0.020 0.002 [0.508 0.051] RS1/2 0.312 0.016 [7.92 0.406] 0.328 0.078 + 0.016 - 0.031 0.020 0.002 [8.33] [1.98 + 0.406 - 0.787] [0.508 0.051] D 120 RS01A 0.406 0.031 0.437 RS01A...300 [10.31 0.787] [11.10] 0.094 0.031 [2.39 0.787] 0.020 0.002 [0.508 0.051] RS01M 0.285 0.025 [7.24 0.635] 0.311 [7.90] 0.110 0.015 [2.79 0.381] 0.020 0.002 [0.508 0.051] RS002 0.625 0.062 0.765 [15.88 1.57] [19.43] 0.250 0.031 [6.35 0.787] 0.040 0.002 [1.02 0.051] RS02M 0.500 0.062 0.562 [12.70 1.57] [14.27] 0.185 0.015 [4.70 0.381] 0.032 0.002 [0.813 0.051] RS02B 0.560 0.062 0.622 RS02B...300 [14.22 1.57] [15.80] 0.187 0.031 [4.75 0.787] 0.032 0.002 [0.813 0.051] RS02C 0.500 0.062 0.593 [12.70 1.57] [15.06] 0.218 0.031 [5.54 0.787] 0.040 0.002 [1.02 0.051] RS02C...17 RS02C...23 RS005 RS005...69 RS005...70 RS007 0.500 0.062 0.593 [12.70 1.57] [15.06] 0.218 0.031 [5.54 0.787] 0.032 0.002 [0.813 0.051] 0.875 0.062 [22.23 1.57] 1.0 [25.4] 0.312 0.031 [7.92 0.787] 0.040 0.002 [1.02 0.051] 1.22 0.062 [30.99 1.57] 1.28 [32.51] 0.312 0.031 [7.92 7.87] 0.040 0.002 [1.02 0.051] RS010 1.78 0.062 RS010...39 [45.21 1.57] 1.87 [47.50] 0.375 0.031 [9.53 0.787] 0.040 0.002 [1.02 0.051] 1.78 0.062 1.84 [45.21 1.57] [46.74] 0.375 0.031 [9.53 0.787] 0.040 0.002 [1.02 0.051] 100 80 60 CHAR. V 40 20 0 -65 -50 Derating CHAR. U 0 50 150 25 RS010...38 250 350 **B (Max.) dimension is clean lead to clean lead. AMBIENT TEMPERATURE IN C NS NON-INDUCTIVE Models of equivalent physical and electrical specifications are available with non-inductive (Aryton-Perry) winding. They are identified by substituting the letter N for R in the model number (NS-5, for example). Two conditions apply: 1. For NS models, divide maximum resistance values by two 2. Body O.D. on NS-2C may exceed that of the RS-2C by 010" TECHNICAL SPECIFICATIONS PARAMETER UNIT Temperature Coefficient ppm/C Dielectric Withstanding Voltage VAC Maximum Working Voltage V Insulation Resistance Terminal Strength lb Solderability - Operating Temperature Range C RS RESISTOR CHARACTERISTICS 90 for below 1 , 50 for 1 to 9.9 , 20 for 10 and above 500 minimum for RS-1/8 thru RS-1A, 1000 minimum for all others (P x R)1/2 1000 Megohm minimum dry, 100 Megohm minimum after moisture test 5 minimum for RS-1/8 thru RS-1A, 10 minimum for all others MIL-PRF-26 type - Meets requirements of ANSI J-STD-002 Characterisitic U = - 65/+ 250, Characteristic V = - 65/+ 350 PERFORMANCE* TEST CONDITIONS OF TEST Thermal Shock Short Time Overload Dielectric Withstanding Voltage Low Temperature Storage High Temperature Exposure Moisture Resistance Shock, Specified Pulse Vibration, High Frequency Load Life Rated power applied until thermally stable, then a min. of 15 minutes at - 55C 5 x rated power (3.75 watt and smaller), 10 x rated power (4 watt and larger) for 5 seconds 500 minimum for RS-1/8 thru RS-1A, 1000 for all others, duration of 1 minute - 65C for 24 hours 250 hours at: U = + 250C, V = + 350C MIL-STD-202 Method 106, 7b not applicable MIL-STD-202 Method 213, 100g's for 6 milliseconds, 10 shocks Frequency varied 10 to 2000Hz, 20g peak, 2 directions 6 hours each 2000 hours at rated power, + 25C, 1.5 hours "ON", 0.5 hours "OFF" 5 to 10 sec., 5 or 10 lb pull test (depending on size), Terminal Strength torsion test - 3 alternating directions, 360 each *All R figures shown are maximum, based upon testing requirements per MIL-PRF-26. Document Number 30204 Revision 10-Oct-05 For technical questions, contact ww2bresistors@vishay.com TEST LIMITS Characteristic U Characteristic V (0.2% + 0.05) R (2.0% + 0.05) R (0.2% + 0.05) R (2.0% + 0.05) R (0.1% + 0.05) R (0.1% + 0.05) R (0.2% + 0.05) R (2.0% + 0.05) R (0.5% + 0.05) R (2.0% + 0.05) R (0.2% + 0.05) R (2.0% + 0.05) R (0.1% + 0.05) R (0.2% + 0.05) R (0.1% + 0.05) R (0.2% + 0.05) R (0.5% + 0.05) R (3.0% + 0.05) R (0.1% + 0.05) R (1.0% + 0.05) R www.vishay.com 125 Military Product Identification Vishay Dale MILITARY PART ORDERING EXAMPLES To help in ordering, the following are examples of military part numbers cross-referenced to Vishay Dale part numbers. For complete information on military part numbering, consult the specific military specification. WIREWOUND RESISTORS: MIL-PRF-26 (Basic [RW]) (Established Reliability alternate MIL-PRF-39007 [RWR]) Vishay Dale Type RW Type RW80 U 49R9 F 1 2 3 4 RW67 V 101 1 2 3 G-3 49.9 1% 1 3 4 RS-5-70 100 5% 1 3 4 2 Characteristic MIL-PRF-18546 (Basic [RE]) (Established Reliability alternate MIL-PRF-39009 [RER]) Vishay Dale Type RE Type RE65 G 1001 1 2 3 RH-10 1k 1% 1 3 4 MIL-PRF-39007 (Established Reliability [RWR]) (Basic is MIL-PRF-26 [RW]) Vishay Dale Type RWR Type RWR74 S 10R1 F R 1 2 3 4 5 ESS-5 10.1 1% R 1 3 4 5 MIL-PRF-39009 (Established Reliability [RER]) (Basic is MIL-PRF-18549 [RE]) RER Type Vishay Dale Type RER65 F 1001 R 1 3 2 4 ERH-10 1k 1% R 1 2 3 4 MIL-PRF-49465 (Basic [RLV]) (Established Reliability-None) RLV Type Vishay Dale Type M49465 06 T R0100 F 1 2 3 4 5 1. Style LVR-3-26 0.01 1% 1 4 5 3. Resistance Value* 4. Tolerance 1. 2 3. 4. Style Characteristic Resistance Value* Tolerance 1. 2. 3. 4. 5. Style Characteristic Resistance Value* Tolerance Failure Rate Level 1. 2. 3. 4. Style Resistance Value Tolerance Failure Rate Level 1. 2. 3. 4. 5. Style Specification Sheet Number Characteristic Resistance Value* Tolerance *See the following page for Military decade resistance table. www.vishay.com 130 For technical questions, contact ww2bresistors@vishay.com Document Number 30243 Revision 28-Mar-02 Military Product Identification Vishay Dale STANDARD RESISTANCE VALUES FOR THE 10 TO 100 DECADE * (B) 0.1 (D) 0.5 10.0 10.1 10.2 10.4 10.5 10.6 10.7 10.9 11.0 11.1 11.3 11.4 11.5 11.7 11.8 12.0 12.1 12.3 12.4 12.6 12.7 12.9 13.0 13.2 13.3 13.5 13.7 13.8 14.0 14.2 14.3 14.5 14.7 14.9 15.0 15.2 15.4 15.6 15.8 16.0 16.2 16.4 16.5 16.7 16.9 17.2 17.4 17.6 (F) 1.0 10.0 10.2 10.5 10.7 11.0 11.3 11.5 11.8 12.1 12.4 12.7 13.0 13.3 13.7 14.0 14.3 14.7 15.0 15.4 15.8 16.2 16.5 16.9 17.4 * (B) 0.1 (D) 0.5 17.8 18.0 18.2 18.4 18.7 18.9 19.1 19.3 19.6 19.8 20.0 20.3 20.5 20.8 21.0 21.3 21.5 21.8 22.1 22.3 22.6 22.9 23.2 23.4 23.7 24.0 24.3 24.6 24.9 25.2 25.5 25.8 26.1 26.4 26.7 27.1 27.4 27.7 28.0 28.4 28.7 29.1 29.4 29.8 30.1 30.5 30.9 31.2 (F) 1.0 17.8 18.0 18.2 18.7 19.1 19.6 20.0 20.5 21.0 21.5 22.1 22.6 23.2 23.7 24.3 24.9 25.5 26.1 26.7 27.4 28.0 28.7 29.4 30.1 30.9 * (B) 0.1 (D) 0.5 31.6 32.0 32.4 32.8 33.2 33.6 34.0 34.4 34.8 35.2 35.7 36.1 36.5 37.0 37.4 37.9 38.3 38.8 39.2 39.7 40.2 40.7 41.2 41.7 42.2 42.7 43.2 43.7 44.2 44.8 45.3 45.9 46.4 47.0 47.5 48.1 48.7 49.3 49.9 50.5 51.1 51.7 52.3 53.0 53.6 54.2 54.9 55.6 (F) 1.0 31.6 32.4 33.2 34.0 34.8 35.7 36.5 37.4 38.3 39.2 40.2 41.2 42.2 43.2 44.2 45.3 46.4 47.5 48.7 49.9 51.1 52.3 53.6 54.9 * (B) 0.1 (D) 0.5 56.2 56.9 57.6 58.3 59.0 59.7 60.4 61.2 61.9 62.6 63.4 64.2 64.9 65.7 66.5 67.3 68.1 69.0 69.8 70.6 71.5 72.3 73.2 74.1 75.0 75.9 76.8 77.7 78.7 79.6 80.6 81.6 82.5 83.5 84.5 85.6 86.6 87.6 88.7 89.8 90.9 92.0 93.1 94.2 95.3 96.5 97.6 98.8 (F) 1.0 56.2 57.6 59.0 60.4 61.9 63.4 64.9 66.5 68.1 69.8 71.5 73.2 75.0 76.8 78.7 80.6 82.5 84.5 86.6 88.7 90.9 93.1 95.3 97.6 * Listing of resistance values for the B and D tolerance does not guarantee that all of these resistance values are available for all resistor models. Document Number 30243 Revision 28-Mar-02 For technical questions, contact ww2bresistors@vishay.com www.vishay.com 131